3 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
6 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 * Configuration settings for the Freescale i.MX6Q SabreSD board.
10 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __ARISTAINETOS_CONFIG_H
13 #define __ARISTAINETOS_CONFIG_H
17 #include "mx6_common.h"
18 #include <linux/sizes.h>
20 #define CONFIG_DISPLAY_CPUINFO
21 #define CONFIG_DISPLAY_BOARDINFO
23 #include <asm/arch/imx-regs.h>
24 #include <asm/imx-common/gpio.h>
26 #define CONFIG_MACH_TYPE 4501
27 #define CONFIG_MMCROOT "/dev/mmcblk0p2"
28 #define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb"
29 #define CONFIG_HOSTNAME aristainetos
30 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
32 #define CONFIG_SYS_GENERIC_BOARD
34 /* Size of malloc() pool */
35 #define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_MXC_GPIO
40 #define CONFIG_MXC_UART
41 #define CONFIG_MXC_UART_BASE UART5_BASE
42 #define CONFIG_CONSOLE_DEV "ttymxc4"
44 #define CONFIG_CMD_FUSE
45 #define CONFIG_MXC_OCOTP
48 #define CONFIG_FSL_ESDHC
49 #define CONFIG_FSL_USDHC
50 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
53 #define CONFIG_CMD_MMC
54 #define CONFIG_GENERIC_MMC
55 #define CONFIG_BOUNCE_BUFFER
56 #define CONFIG_CMD_EXT2
57 #define CONFIG_CMD_FAT
58 #define CONFIG_DOS_PARTITION
60 #define CONFIG_CMD_PING
61 #define CONFIG_CMD_DHCP
62 #define CONFIG_CMD_MII
63 #define CONFIG_CMD_NET
64 #define CONFIG_FEC_MXC
66 #define IMX_FEC_BASE ENET_BASE_ADDR
67 #define CONFIG_FEC_XCV_TYPE RMII
68 #define CONFIG_ETHPRIME "FEC"
69 #define CONFIG_FEC_MXC_PHYADDR 0
72 #define CONFIG_PHY_MICREL
75 #define CONFIG_SPI_FLASH
76 #define CONFIG_SPI_FLASH_MTD
77 #define CONFIG_SPI_FLASH_STMICRO
78 #define CONFIG_MXC_SPI
79 #define CONFIG_SF_DEFAULT_BUS 3
80 #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8))
81 #define CONFIG_SF_DEFAULT_SPEED 20000000
82 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
83 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
85 /* allow to overwrite serial and ethaddr */
86 #define CONFIG_ENV_OVERWRITE
87 #define CONFIG_CONS_INDEX 1
88 #define CONFIG_BAUDRATE 115200
90 /* Command definition */
91 #include <config_cmd_default.h>
93 #define CONFIG_CMD_BMODE
94 #define CONFIG_CMD_BOOTZ
95 #define CONFIG_CMD_SETEXPR
96 #undef CONFIG_CMD_IMLS
98 #define CONFIG_BOOTDELAY 3
100 #define CONFIG_LOADADDR 0x12000000
101 #define CONFIG_SYS_TEXT_BASE 0x17800000
103 #define CONFIG_EXTRA_ENV_SETTINGS \
105 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
106 "fdt_addr_r=0x11000000\0" \
107 "kernel_addr_r=0x12000000\0" \
108 "kernel_file=uImage\0" \
111 "console=" CONFIG_CONSOLE_DEV "\0" \
112 "fdt_high=0xffffffff\0" \
113 "initrd_high=0xffffffff\0" \
115 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
116 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
117 "mmcargs=setenv bootargs console=${console},${baudrate} " \
118 "root=${mmcroot}\0" \
119 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
121 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
123 "mmcboot=echo Booting from mmc ...; " \
124 "run mmcargs;run loadimage loadfdt fdt_setup;" \
125 "bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
126 "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
127 "nfsopts=nfsvers=3 nolock rw\0" \
129 "fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
130 "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
131 "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
132 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
133 "get_env=mw ${loadaddr} 0x00000000 0x20000;" \
134 "tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
135 "env import -t ${loadaddr}\0" \
136 "addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
137 "bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
139 "net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
140 "root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
141 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
142 "${hostname}:${netdev}:off\0" \
143 "net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
144 "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
145 "uboot=/tftpboot/aristainetos/u-boot.imx\0" \
146 "load_uboot=tftp ${loadaddr} ${uboot}\0" \
148 "upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
149 "mw.b 10200000 0x00 ${uboot_sz};" \
150 "run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
151 "sf write ${loadaddr} 400 ${filesize};" \
152 "sf read 10200000 400 ${uboot_sz};" \
153 "cmp.b ${loadaddr} 10200000 bc000\0" \
154 "ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
155 "load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
156 "load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
157 "ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
158 "run net_args addmtd addmisc;run fdt_setup;" \
159 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
160 "rootfsname=rootfs\0" \
161 "ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
162 "ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
163 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
164 "${hostname}:${netdev}:off\0" \
165 "ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
166 "run bootargs_defaults ubi_args addmtd addmisc;" \
167 "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
168 "ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
169 "upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
170 "ubi write ${loadaddr} rootfs ${filesize}\0" \
174 "ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
175 "ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"
177 #define CONFIG_BOOTCOMMAND \
178 "mmc dev ${mmcdev};" \
179 "if mmc rescan; then " \
181 "else run ubi_ubi; fi"
183 #define CONFIG_ARP_TIMEOUT 200UL
185 /* Miscellaneous configurable options */
186 #define CONFIG_SYS_LONGHELP
187 #define CONFIG_SYS_HUSH_PARSER
188 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
189 #define CONFIG_AUTO_COMPLETE
190 #define CONFIG_SYS_CBSIZE 256
192 /* Print Buffer Size */
193 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
194 #define CONFIG_SYS_MAXARGS 16
195 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
197 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
198 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
199 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
201 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
203 #define CONFIG_CMDLINE_EDITING
204 #define CONFIG_STACKSIZE (128 * 1024)
206 /* Physical Memory Map */
207 #define CONFIG_NR_DRAM_BANKS 1
208 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
210 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
211 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
212 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
214 #define CONFIG_SYS_INIT_SP_OFFSET \
215 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
216 #define CONFIG_SYS_INIT_SP_ADDR \
217 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
219 /* FLASH and environment organization */
220 #define CONFIG_SYS_NO_FLASH
222 #define CONFIG_ENV_SIZE (12 * 1024)
223 #define CONFIG_ENV_IS_IN_SPI_FLASH
224 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
225 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
226 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
227 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
228 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
229 #define CONFIG_ENV_SECT_SIZE (0x010000)
230 #define CONFIG_ENV_OFFSET (0x0c0000)
231 #define CONFIG_ENV_OFFSET_REDUND (0x0d0000)
233 #define CONFIG_OF_LIBFDT
235 #define CONFIG_CMD_CACHE
237 #define CONFIG_SYS_FSL_USDHC_NUM 2
239 #define CONFIG_CMD_I2C
240 #define CONFIG_SYS_I2C
241 #define CONFIG_SYS_I2C_MXC
242 #define CONFIG_SYS_I2C_SPEED 100000
243 #define CONFIG_SYS_I2C_SLAVE 0x7f
244 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
246 #define CONFIG_CMD_GPIO
247 #define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
250 #define CONFIG_CMD_NAND
251 #define CONFIG_CMD_NAND_TRIMFFS
252 #define CONFIG_NAND_MXS
253 #define CONFIG_SYS_MAX_NAND_DEVICE 1
254 #define CONFIG_SYS_NAND_BASE 0x40000000
255 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
256 #define CONFIG_SYS_NAND_ONFI_DETECTION
258 /* DMA stuff, needed for GPMI/MXS NAND support */
259 #define CONFIG_APBH_DMA
260 #define CONFIG_APBH_DMA_BURST
261 #define CONFIG_APBH_DMA_BURST8
264 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
265 #define CONFIG_SYS_RTC_BUS_NUM 2
266 #define CONFIG_RTC_M41T11
267 #define CONFIG_CMD_DATE
270 #define CONFIG_CMD_USB
271 #define CONFIG_CMD_FAT
272 #define CONFIG_USB_EHCI
273 #define CONFIG_USB_EHCI_MX6
274 #define CONFIG_USB_STORAGE
275 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
276 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
277 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
278 #define CONFIG_MXC_USB_FLAGS 0
280 #define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
281 #define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31)
284 #define CONFIG_CMD_MTDPARTS
285 #define CONFIG_MTD_PARTITIONS
286 #define CONFIG_MTD_DEVICE
287 #define CONFIG_RBTREE
289 #define CONFIG_CMD_UBI
290 #define CONFIG_CMD_UBIFS
292 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
293 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)"
295 #define CONFIG_MTD_UBI_FASTMAP
296 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
298 #define CONFIG_HW_WATCHDOG
299 #define CONFIG_IMX_WATCHDOG
305 #define CONFIG_VIDEO_IPUV3
306 /* check this console not needed, after test remove it */
307 #define CONFIG_CFB_CONSOLE
308 #define CONFIG_VGA_AS_SINGLE_DEVICE
309 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
310 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
311 #define CONFIG_VIDEO_BMP_RLE8
312 #define CONFIG_SPLASH_SCREEN
313 #define CONFIG_SPLASH_SCREEN_ALIGN
314 #define CONFIG_BMP_16BPP
315 #define CONFIG_VIDEO_LOGO
316 #define CONFIG_VIDEO_BMP_LOGO
317 #define CONFIG_IPUV3_CLK 198000000
318 #define CONFIG_IMX_VIDEO_SKIP
320 #define CONFIG_CMD_BMP
322 #define CONFIG_PWM_IMX
323 #define CONFIG_IMX6_PWM_PER_CLK 66000000
325 #endif /* __ARISTAINETOS_CONFIG_H */