include/configs/aristainetos-common.h

   1 /*
   2  * (C) Copyright 2015
   3  * (C) Copyright 2014
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H
  14 #define __ARISTAINETOS_COMMON_CONFIG_H
  15
  16 #define CONFIG_MX6
  17
  18 #include "mx6_common.h"
  19
  20 #define CONFIG_DISPLAY_CPUINFO
  21 #define CONFIG_DISPLAY_BOARDINFO
  22
  23 #define CONFIG_MACH_TYPE        4501
  24 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  25 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  26
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * SZ_1M)
  31
  32 #define CONFIG_BOARD_EARLY_INIT_F
  33 #define CONFIG_MXC_GPIO
  34
  35 #define CONFIG_MXC_UART
  36
  37 #define CONFIG_CMD_FUSE
  38 #define CONFIG_MXC_OCOTP
  39
  40 /* MMC Configs */
  41 #define CONFIG_FSL_ESDHC
  42 #define CONFIG_FSL_USDHC
  43 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  44
  45 #define CONFIG_MMC
  46 #define CONFIG_CMD_MMC
  47 #define CONFIG_GENERIC_MMC
  48 #define CONFIG_BOUNCE_BUFFER
  49 #define CONFIG_CMD_EXT2
  50 #define CONFIG_CMD_FAT
  51 #define CONFIG_DOS_PARTITION
  52
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_DHCP
  55 #define CONFIG_CMD_MII
  56 #define CONFIG_CMD_NET
  57 #define CONFIG_FEC_MXC
  58 #define CONFIG_MII
  59 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  60 #define CONFIG_ETHPRIME                 "FEC"
  61 #define CONFIG_FEC_MXC_PHYADDR          0
  62
  63 #define CONFIG_PHYLIB
  64 #define CONFIG_PHY_MICREL
  65
  66 #define CONFIG_CMD_SF
  67 #define CONFIG_SPI_FLASH
  68 #define CONFIG_SPI_FLASH_MTD
  69 #define CONFIG_SPI_FLASH_STMICRO
  70 #define CONFIG_MXC_SPI
  71 #define CONFIG_SF_DEFAULT_BUS           3
  72 #define CONFIG_SF_DEFAULT_SPEED         20000000
  73 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  74 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  75
  76 /* allow to overwrite serial and ethaddr */
  77 #define CONFIG_ENV_OVERWRITE
  78 #define CONFIG_CONS_INDEX               1
  79 #define CONFIG_BAUDRATE                 115200
  80
  81 /* Command definition */
  82 #define CONFIG_CMD_BMODE
  83 #define CONFIG_CMD_BOOTZ
  84 #define CONFIG_CMD_SETEXPR
  85
  86 #define CONFIG_BOOTDELAY                3
  87
  88 #define CONFIG_LOADADDR                 0x12000000
  89 #define CONFIG_SYS_TEXT_BASE            0x17800000
  90
  91 #define CONFIG_EXTRA_ENV_SETTINGS \
  92         "script=u-boot.scr\0" \
  93         "fit_file=/boot/system.itb\0" \
  94         "loadaddr=0x12000000\0" \
  95         "fit_addr_r=0x14000000\0" \
  96         "uboot=/boot/u-boot.imx\0" \
  97         "uboot_sz=d0000\0" \
  98         "rescue_sys_addr=f0000\0" \
  99         "rescue_sys_length=f10000\0" \
 100         "panel=lb07wv8\0" \
 101         "splashpos=m,m\0" \
 102         "console=" CONFIG_CONSOLE_DEV "\0" \
 103         "fdt_high=0xffffffff\0"   \
 104         "initrd_high=0xffffffff\0" \
 105         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 106         "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
 107                 "default ${board_type}\0" \
 108         "get_env=mw ${loadaddr} 0 0x20000;" \
 109                 "mmc rescan;" \
 110                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 111                 "env import -t ${loadaddr}\0" \
 112         "default_env=mw ${loadaddr} 0 0x20000;" \
 113                 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
 114                 "board_type panel;" \
 115                 "env default -a;" \
 116                 "env import -t ${loadaddr}\0" \
 117         "loadbootscript=" \
 118                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 119         "bootscript=echo Running bootscript from mmc ...; " \
 120                 "source\0" \
 121         "mmcpart=1\0" \
 122         "mmcdev=0\0" \
 123         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 124         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 125                 "root=${mmcroot}\0" \
 126         "mmcboot=echo Booting from mmc ...; " \
 127                 "run mmcargs addmtd addmisc set_fit_default;" \
 128                 "bootm ${fit_addr_r}\0" \
 129         "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 130                 "${fit_file}\0" \
 131         "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 132                 "${uboot}\0" \
 133         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 134                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 135                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 136                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 137                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 138                 "sf write ${loadaddr} 400 ${filesize};" \
 139                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 140                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 141         "ubiboot=echo Booting from ubi ...; " \
 142                 "run ubiargs addmtd addmisc set_fit_default;" \
 143                 "bootm ${fit_addr_r}\0" \
 144         "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
 145                 "ubifsload ${fit_addr_r} /boot/system.itb; " \
 146                 "imi ${fit_addr_r}\0 " \
 147         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 148                 "root=/dev/ram rw\0 " \
 149         "rescueboot=echo Booting rescue system from NOR ...; " \
 150                 "run rescueargs addmtd addmisc set_fit_default;" \
 151                 "bootm ${fit_addr_r}\0" \
 152         "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
 153                 "${rescue_sys_length}; imi ${fit_addr_r}\0" \
 154         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 155
 156 #define CONFIG_BOOTCOMMAND \
 157         "mmc dev ${mmcdev};" \
 158         "if mmc rescan; then " \
 159                 "if run loadbootscript; then " \
 160                         "run bootscript; " \
 161                 "else " \
 162                         "if run mmc_load_fit; then " \
 163                                 "run mmcboot; " \
 164                         "else " \
 165                                 "if run ubifs_load_fit; then " \
 166                                         "run ubiboot; " \
 167                                 "else " \
 168                                         "if run rescue_load_fit; then " \
 169                                                 "run rescueboot; " \
 170                                         "else " \
 171                                                 "echo RESCUE SYSTEM BOOT " \
 172                                                         "FAILURE;" \
 173                                         "fi; " \
 174                                 "fi; " \
 175                         "fi; " \
 176                 "fi; " \
 177         "else " \
 178                 "if run ubifs_load_fit; then " \
 179                         "run ubiboot; " \
 180                 "else " \
 181                         "if run rescue_load_fit; then " \
 182                                 "run rescueboot; " \
 183                         "else " \
 184                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 185                         "fi; " \
 186                 "fi; " \
 187         "fi"
 188
 189 #define CONFIG_ARP_TIMEOUT              200UL
 190
 191 /* Miscellaneous configurable options */
 192 #define CONFIG_SYS_LONGHELP
 193 #define CONFIG_SYS_HUSH_PARSER
 194 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 195 #define CONFIG_AUTO_COMPLETE
 196 #define CONFIG_SYS_CBSIZE               256
 197
 198 /* Print Buffer Size */
 199 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 200 #define CONFIG_SYS_MAXARGS             16
 201 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 202
 203 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 204 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 205 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 206
 207 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 208
 209 #define CONFIG_CMDLINE_EDITING
 210 #define CONFIG_STACKSIZE                (128 * 1024)
 211
 212 /* Physical Memory Map */
 213 #define CONFIG_NR_DRAM_BANKS            1
 214 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 215
 216 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 217 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 218 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 219
 220 #define CONFIG_SYS_INIT_SP_OFFSET \
 221         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 222 #define CONFIG_SYS_INIT_SP_ADDR \
 223         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 224
 225 /* Environment organization */
 226 #define CONFIG_ENV_SIZE                 (12 * 1024)
 227 #define CONFIG_ENV_IS_IN_SPI_FLASH
 228 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 229 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 230 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 231 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 232 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 233 #define CONFIG_ENV_SECT_SIZE            (0x010000)
 234 #define CONFIG_ENV_OFFSET               (0x0d0000)
 235 #define CONFIG_ENV_OFFSET_REDUND        (0x0e0000)
 236
 237 #define CONFIG_OF_LIBFDT
 238
 239 #define CONFIG_CMD_CACHE
 240
 241 #define CONFIG_SYS_FSL_USDHC_NUM        2
 242
 243 /* I2C */
 244 #define CONFIG_CMD_I2C
 245 #define CONFIG_SYS_I2C
 246 #define CONFIG_SYS_I2C_MXC
 247 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 248 #define CONFIG_SYS_I2C_SPEED            100000
 249 #define CONFIG_SYS_I2C_SLAVE            0x7f
 250 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x00} }
 251
 252 #define CONFIG_CMD_GPIO
 253
 254 /* NAND stuff */
 255 #define CONFIG_CMD_NAND
 256 #define CONFIG_CMD_NAND_TRIMFFS
 257 #define CONFIG_NAND_MXS
 258 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 259 #define CONFIG_SYS_NAND_BASE            0x40000000
 260 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 261 #define CONFIG_SYS_NAND_ONFI_DETECTION
 262
 263 /* DMA stuff, needed for GPMI/MXS NAND support */
 264 #define CONFIG_APBH_DMA
 265 #define CONFIG_APBH_DMA_BURST
 266 #define CONFIG_APBH_DMA_BURST8
 267
 268 /* RTC */
 269 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 270 #define CONFIG_SYS_RTC_BUS_NUM  2
 271 #define CONFIG_RTC_M41T11
 272 #define CONFIG_CMD_DATE
 273
 274 /* USB Configs */
 275 #define CONFIG_CMD_USB
 276 #define CONFIG_CMD_FAT
 277 #define CONFIG_USB_EHCI
 278 #define CONFIG_USB_EHCI_MX6
 279 #define CONFIG_USB_STORAGE
 280 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 281 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 282 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 283 #define CONFIG_MXC_USB_FLAGS    0
 284
 285 /* UBI support */
 286 #define CONFIG_CMD_MTDPARTS
 287 #define CONFIG_MTD_PARTITIONS
 288 #define CONFIG_MTD_DEVICE
 289 #define CONFIG_RBTREE
 290 #define CONFIG_LZO
 291 #define CONFIG_CMD_UBI
 292 #define CONFIG_CMD_UBIFS
 293
 294 #define CONFIG_MTD_UBI_FASTMAP
 295 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT      1
 296
 297 #define CONFIG_HW_WATCHDOG
 298 #define CONFIG_IMX_WATCHDOG
 299
 300 #define CONFIG_FIT
 301
 302 /* Framebuffer */
 303 #define CONFIG_VIDEO
 304 #define CONFIG_VIDEO_IPUV3
 305 /* check this console not needed, after test remove it */
 306 #define CONFIG_CFB_CONSOLE
 307 #define CONFIG_VGA_AS_SINGLE_DEVICE
 308 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 309 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 310 #define CONFIG_VIDEO_BMP_RLE8
 311 #define CONFIG_SPLASH_SCREEN
 312 #define CONFIG_SPLASH_SCREEN_ALIGN
 313 #define CONFIG_BMP_16BPP
 314 #define CONFIG_VIDEO_LOGO
 315 #define CONFIG_VIDEO_BMP_LOGO
 316 #define CONFIG_IPUV3_CLK 198000000
 317 #define CONFIG_IMX_VIDEO_SKIP
 318
 319 #define CONFIG_CMD_BMP
 320
 321 #define CONFIG_PWM_IMX
 322 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 323
 324 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */