3 * Configuration settings for the Armadeus Project motherboard APF27
5 * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
7 * SPDX-License-Identifier: GPL-2.0+
13 #define CONFIG_ENV_VERSION 10
14 #define CONFIG_BOARD_NAME apf27
19 #define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */
20 #define CONFIG_MACH_TYPE 1698 /* APF27 */
23 * Enable the call to miscellaneous platform dependent initialization.
25 #define CONFIG_SYS_NO_FLASH
30 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
31 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
32 #define CONFIG_SPL_MAX_SIZE 2048
33 #define CONFIG_SPL_TEXT_BASE 0xA0000000
35 /* NAND boot config */
36 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
37 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
38 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
39 #define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800
44 #define CONFIG_BOOTP_SUBNETMASK
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47 #define CONFIG_BOOTP_BOOTPATH
48 #define CONFIG_BOOTP_BOOTFILESIZE
49 #define CONFIG_BOOTP_DNS
50 #define CONFIG_BOOTP_DNS2
52 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME
53 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
58 #define CONFIG_CMD_BSP /* Board Specific functions */
59 #define CONFIG_CMD_DATE
60 #define CONFIG_CMD_EEPROM
61 #define CONFIG_CMD_IMX_FUSE /* imx iim fuse */
62 #define CONFIG_CMD_MTDPARTS /* MTD partition support */
63 #define CONFIG_CMD_NAND /* NAND support */
64 #define CONFIG_CMD_NAND_LOCK_UNLOCK
65 #define CONFIG_CMD_NAND_TRIMFFS
66 #define CONFIG_CMD_UBIFS
69 * Memory configurations
71 #define CONFIG_NR_DRAM_POPULATED 1
72 #define CONFIG_NR_DRAM_BANKS 2
74 #define ACFG_SDRAM_MBYTE_SYZE 64
76 #define PHYS_SDRAM_1 0xA0000000
77 #define PHYS_SDRAM_2 0xB0000000
78 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
79 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10))
80 #define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */
81 #define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */
83 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \
84 + PHYS_SDRAM_1_SIZE - 0x0100000)
86 #define CONFIG_SYS_TEXT_BASE 0xA0000800
91 #define ACFG_MONITOR_OFFSET 0x00000000
92 #define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */
93 #define CONFIG_ENV_IS_IN_NAND
94 #define CONFIG_ENV_OVERWRITE
95 #define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */
96 #define CONFIG_ENV_SIZE 0x00020000 /* 128kB */
97 #define CONFIG_ENV_RANGE 0X00080000 /* 512kB */
98 #define CONFIG_ENV_OFFSET_REDUND \
99 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */
100 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */
101 #define CONFIG_FIRMWARE_OFFSET 0x00200000
102 #define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */
103 #define CONFIG_KERNEL_OFFSET 0x00300000
104 #define CONFIG_ROOTFS_OFFSET 0x00800000
106 #define CONFIG_MTDMAP "mxc_nand.0"
107 #define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP
108 #define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \
118 * U-Boot general configurations
120 #define CONFIG_SYS_LONGHELP
121 #define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */
122 #define CONFIG_SYS_PBSIZE \
123 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
124 /* Print buffer size */
125 #define CONFIG_SYS_MAXARGS 16 /* max command args */
126 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
127 /* Boot argument buffer size */
128 #define CONFIG_AUTO_COMPLETE
129 #define CONFIG_CMDLINE_EDITING
130 #define CONFIG_ENV_VARS_UBOOT_CONFIG
131 #define CONFIG_PREBOOT "run check_flash check_env;"
136 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
137 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
138 #define CONFIG_INITRD_TAG /* send initrd params */
140 #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin"
141 #define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \
142 __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
143 " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
145 #define ACFG_CONSOLE_DEV ttySMX0
146 #define CONFIG_BOOTCOMMAND "run ubifsboot"
147 #define CONFIG_SYS_AUTOLOAD "no"
149 * Default load address for user programs and kernel
151 #define CONFIG_LOADADDR 0xA0000000
152 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
157 #define CONFIG_EXTRA_ENV_SETTINGS \
158 "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
159 "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
160 "mtdparts=" MTDPARTS_DEFAULT "\0" \
161 "partition=nand0,6\0" \
162 "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \
163 "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \
164 "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \
165 "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \
166 "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \
167 "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \
168 "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
169 "kernel_addr_r=A0000000\0" \
170 "check_env=if test -n ${flash_env_version}; " \
171 "then env default env_version; " \
172 "else env set flash_env_version ${env_version}; env save; "\
174 "if itest ${flash_env_version} < ${env_version}; then " \
175 "echo \"*** Warning - Environment version" \
176 " change suggests: run flash_reset_env; reset\"; "\
177 "env default flash_reset_env; "\
179 "check_flash=nand lock; nand unlock ${env_addr}; \0" \
180 "flash_reset_env=env default -f -a; saveenv; run update_env;" \
181 "echo Flash environment variables erased!\0" \
182 "download_uboot=tftpboot ${loadaddr} ${board_name}" \
183 "-u-boot-with-spl.bin\0" \
184 "flash_uboot=nand unlock ${u-boot_addr} ;" \
185 "nand erase.part u-boot;" \
186 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
187 "then nand lock; nand unlock ${env_addr};" \
188 "echo Flashing of uboot succeed;" \
189 "else echo Flashing of uboot failed;" \
191 "update_uboot=run download_uboot flash_uboot\0" \
192 "download_env=tftpboot ${loadaddr} ${board_name}" \
193 "-u-boot-env.txt\0" \
194 "flash_env=env import -t ${loadaddr}; env save; \0" \
195 "update_env=run download_env flash_env\0" \
196 "update_all=run update_env update_uboot\0" \
197 "unlock_regs=mw 10000008 0; mw 10020008 0\0" \
202 #define CONFIG_MXC_UART
203 #define CONFIG_CONS_INDEX 1
204 #define CONFIG_BAUDRATE 115200
205 #define CONFIG_MXC_UART_BASE UART1_BASE
210 #define CONFIG_MXC_GPIO
219 #define CONFIG_NAND_MXC
221 #define CONFIG_MXC_NAND_REGS_BASE 0xD8000000
222 #define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE
223 #define CONFIG_SYS_MAX_NAND_DEVICE 1
225 #define CONFIG_MXC_NAND_HWECC
226 #define CONFIG_SYS_NAND_LARGEPAGE
227 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
228 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
229 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
230 #define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \
231 CONFIG_SYS_NAND_PAGE_SIZE
232 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
233 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 11
234 #define NAND_MAX_CHIPS 1
236 #define CONFIG_FLASH_SHOW_PROGRESS 45
237 #define CONFIG_SYS_NAND_QUIET 1
240 * Partitions & Filsystems
242 #define CONFIG_MTD_DEVICE
243 #define CONFIG_MTD_PARTITIONS
244 #define CONFIG_DOS_PARTITION
245 #define CONFIG_SUPPORT_VFAT
250 #define CONFIG_RBTREE
254 * Ethernet (on SOC imx FEC)
256 #define CONFIG_FEC_MXC
257 #define CONFIG_FEC_MXC_PHYADDR 0x1f
258 #define CONFIG_MII /* MII PHY management */
263 #ifndef CONFIG_SPL_BUILD
266 #define CONFIG_FPGA_COUNT 1
267 #define CONFIG_FPGA_XILINX
268 #define CONFIG_FPGA_SPARTAN3
269 #define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */
270 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
271 #define CONFIG_SYS_FPGA_CHECK_CTRLC
272 #define CONFIG_SYS_FPGA_CHECK_ERROR
277 #ifdef CONFIG_CMD_IMX_FUSE
278 #define IIM_MAC_BANK 0
279 #define IIM_MAC_ROW 5
280 #define IIM0_SCC_KEY 11
288 #ifdef CONFIG_CMD_I2C
289 #define CONFIG_SYS_I2C
290 #define CONFIG_SYS_I2C_MXC
291 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
292 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
293 #define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */
294 #define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F
295 #define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */
296 #define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F
297 #define CONFIG_SYS_I2C_NOPROBES { }
299 #ifdef CONFIG_CMD_EEPROM
300 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */
301 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
302 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
303 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */
304 #endif /* CONFIG_CMD_EEPROM */
305 #endif /* CONFIG_CMD_I2C */
310 #ifdef CONFIG_CMD_MMC
312 #define CONFIG_GENERIC_MMC
313 #define CONFIG_MXC_MMC
314 #define CONFIG_MXC_MCI_REGS_BASE 0x10014000
320 #ifdef CONFIG_CMD_DATE
321 #define CONFIG_RTC_DS1374
322 #define CONFIG_SYS_RTC_BUS_NUM 0
323 #endif /* CONFIG_CMD_DATE */
328 * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
329 * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
331 #define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */
333 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
335 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
336 #define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */
339 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
341 #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
342 #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
345 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
347 #define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */
348 #define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */
351 #endif /* __CONFIG_H */