include/configs/apf27.h

   1 /*
   2  *
   3  * Configuration settings for the Armadeus Project motherboard APF27
   4  *
   5  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
   6  *
   7  * SPDX-License-Identifier:    GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_VERSION_VARIABLE
  14 #define CONFIG_ENV_VERSION      10
  15 #define CONFIG_IDENT_STRING     " apf27 patch 3.10"
  16 #define CONFIG_BOARD_NAME apf27
  17
  18 /*
  19  * SoC configurations
  20  */
  21 #define CONFIG_MX27                     /* This is a Freescale i.MX27 Chip */
  22 #define CONFIG_MACH_TYPE        1698    /* APF27 */
  23
  24 /*
  25  * Enable the call to miscellaneous platform dependent initialization.
  26  */
  27 #define CONFIG_SYS_NO_FLASH
  28
  29 /*
  30  * Board display option
  31  */
  32 #define CONFIG_DISPLAY_BOARDINFO
  33 #define CONFIG_DISPLAY_CPUINFO
  34
  35 /*
  36  * SPL
  37  */
  38 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  39 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  40 #define CONFIG_SPL_MAX_SIZE     2048
  41 #define CONFIG_SPL_TEXT_BASE    0xA0000000
  42 #define CONFIG_SPL_SERIAL_SUPPORT
  43
  44 /* NAND boot config */
  45 #define CONFIG_SPL_NAND_SUPPORT
  46 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x800
  48 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     CONFIG_SYS_MONITOR_LEN - 0x800
  50
  51 /*
  52  * BOOTP options
  53  */
  54 #define CONFIG_BOOTP_SUBNETMASK
  55 #define CONFIG_BOOTP_GATEWAY
  56 #define CONFIG_BOOTP_HOSTNAME
  57 #define CONFIG_BOOTP_BOOTPATH
  58 #define CONFIG_BOOTP_BOOTFILESIZE
  59 #define CONFIG_BOOTP_DNS
  60 #define CONFIG_BOOTP_DNS2
  61
  62 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME
  63 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
  64
  65 /*
  66  * U-Boot Commands
  67  */
  68 #define CONFIG_CMD_BSP          /* Board Specific functions     */
  69 #define CONFIG_CMD_DATE
  70 #define CONFIG_CMD_EEPROM
  71 #define CONFIG_CMD_IMX_FUSE     /* imx iim fuse                 */
  72 #define CONFIG_CMD_MTDPARTS     /* MTD partition support        */
  73 #define CONFIG_CMD_NAND         /* NAND support                 */
  74 #define CONFIG_CMD_NAND_LOCK_UNLOCK
  75 #define CONFIG_CMD_NAND_TRIMFFS
  76 #define CONFIG_CMD_UBI
  77 #define CONFIG_CMD_UBIFS
  78
  79 /*
  80  * Memory configurations
  81  */
  82 #define CONFIG_NR_DRAM_POPULATED 1
  83 #define CONFIG_NR_DRAM_BANKS    2
  84
  85 #define ACFG_SDRAM_MBYTE_SYZE 64
  86
  87 #define PHYS_SDRAM_1                    0xA0000000
  88 #define PHYS_SDRAM_2                    0xB0000000
  89 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  90 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (512<<10))
  91 #define CONFIG_SYS_MEMTEST_START        0xA0000000      /* memtest test area  */
  92 #define CONFIG_SYS_MEMTEST_END          0xA0300000      /* 3 MiB RAM test */
  93
  94 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE  \
  95                 + PHYS_SDRAM_1_SIZE - 0x0100000)
  96
  97 #define CONFIG_SYS_TEXT_BASE            0xA0000800
  98
  99 /*
 100  * FLASH organization
 101  */
 102 #define ACFG_MONITOR_OFFSET             0x00000000
 103 #define CONFIG_SYS_MONITOR_LEN          0x00100000      /* 1MiB */
 104 #define CONFIG_ENV_IS_IN_NAND
 105 #define CONFIG_ENV_OVERWRITE
 106 #define CONFIG_ENV_OFFSET               0x00100000      /* NAND offset */
 107 #define CONFIG_ENV_SIZE                 0x00020000      /* 128kB  */
 108 #define CONFIG_ENV_RANGE                0X00080000      /* 512kB */
 109 #define CONFIG_ENV_OFFSET_REDUND        \
 110                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)  /* +512kB */
 111 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE /* 512kB */
 112 #define CONFIG_FIRMWARE_OFFSET          0x00200000
 113 #define CONFIG_FIRMWARE_SIZE            0x00080000      /* 512kB  */
 114 #define CONFIG_KERNEL_OFFSET            0x00300000
 115 #define CONFIG_ROOTFS_OFFSET            0x00800000
 116
 117 #define CONFIG_MTDMAP                   "mxc_nand.0"
 118 #define MTDIDS_DEFAULT                  "nand0=" CONFIG_MTDMAP
 119 #define MTDPARTS_DEFAULT        "mtdparts=" CONFIG_MTDMAP \
 120                                 ":1M(u-boot)ro," \
 121                                 "512K(env)," \
 122                                 "512K(env2)," \
 123                                 "512K(firmware)," \
 124                                 "512K(dtb)," \
 125                                 "5M(kernel)," \
 126                                 "-(rootfs)"
 127
 128 /*
 129  * U-Boot general configurations
 130  */
 131 #define CONFIG_SYS_LONGHELP
 132 #define CONFIG_SYS_CBSIZE               2048            /* console I/O buffer */
 133 #define CONFIG_SYS_PBSIZE               \
 134                                 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 135                                                 /* Print buffer size */
 136 #define CONFIG_SYS_MAXARGS              16              /* max command args */
 137 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 138                                                 /* Boot argument buffer size */
 139 #define CONFIG_AUTO_COMPLETE
 140 #define CONFIG_CMDLINE_EDITING
 141 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 142 #define CONFIG_PREBOOT                  "run check_flash check_env;"
 143
 144 /*
 145  * Boot Linux
 146  */
 147 #define CONFIG_CMDLINE_TAG              /* send commandline to Kernel   */
 148 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
 149 #define CONFIG_INITRD_TAG               /* send initrd params   */
 150
 151 #define CONFIG_BOOTDELAY        5
 152 #define CONFIG_ZERO_BOOTDELAY_CHECK
 153 #define CONFIG_BOOTFILE         __stringify(CONFIG_BOARD_NAME) "-linux.bin"
 154 #define CONFIG_BOOTARGS         "console=" __stringify(ACFG_CONSOLE_DEV) "," \
 155                         __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
 156                         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
 157
 158 #define ACFG_CONSOLE_DEV        ttySMX0
 159 #define CONFIG_BOOTCOMMAND      "run ubifsboot"
 160 #define CONFIG_SYS_AUTOLOAD     "no"
 161 /*
 162  * Default load address for user programs and kernel
 163  */
 164 #define CONFIG_LOADADDR                 0xA0000000
 165 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 166
 167 /*
 168  * Extra Environments
 169  */
 170 #define CONFIG_EXTRA_ENV_SETTINGS \
 171         "env_version="          __stringify(CONFIG_ENV_VERSION)         "\0" \
 172         "consoledev="           __stringify(ACFG_CONSOLE_DEV)           "\0" \
 173         "mtdparts="             MTDPARTS_DEFAULT                        "\0" \
 174         "partition=nand0,6\0"                                           \
 175         "u-boot_addr="          __stringify(ACFG_MONITOR_OFFSET)        "\0" \
 176         "env_addr="             __stringify(CONFIG_ENV_OFFSET)          "\0" \
 177         "firmware_addr="        __stringify(CONFIG_FIRMWARE_OFFSET)     "\0" \
 178         "firmware_size="        __stringify(CONFIG_FIRMWARE_SIZE)       "\0" \
 179         "kernel_addr="          __stringify(CONFIG_KERNEL_OFFSET)       "\0" \
 180         "rootfs_addr="          __stringify(CONFIG_ROOTFS_OFFSET)       "\0" \
 181         "board_name="           __stringify(CONFIG_BOARD_NAME)          "\0" \
 182         "kernel_addr_r=A0000000\0" \
 183         "check_env=if test -n ${flash_env_version}; "                   \
 184                 "then env default env_version; "                        \
 185                 "else env set flash_env_version ${env_version}; env save; "\
 186                 "fi; "                                                  \
 187                 "if itest ${flash_env_version} < ${env_version}; then " \
 188                         "echo \"*** Warning - Environment version"      \
 189                         " change suggests: run flash_reset_env; reset\"; "\
 190                         "env default flash_reset_env; "\
 191                 "fi; \0"                                                \
 192         "check_flash=nand lock; nand unlock ${env_addr}; \0"    \
 193         "flash_reset_env=env default -f -a; saveenv; run update_env;"   \
 194                 "echo Flash environment variables erased!\0"            \
 195         "download_uboot=tftpboot ${loadaddr} ${board_name}"             \
 196                 "-u-boot-with-spl.bin\0"                                \
 197         "flash_uboot=nand unlock ${u-boot_addr} ;"                      \
 198                 "nand erase.part u-boot;"               \
 199                 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
 200                         "then nand lock; nand unlock ${env_addr};"      \
 201                                 "echo Flashing of uboot succeed;"       \
 202                         "else echo Flashing of uboot failed;"           \
 203                 "fi; \0"                                                \
 204         "update_uboot=run download_uboot flash_uboot\0"                 \
 205         "download_env=tftpboot ${loadaddr} ${board_name}"               \
 206                 "-u-boot-env.txt\0"                             \
 207         "flash_env=env import -t ${loadaddr}; env save; \0"             \
 208         "update_env=run download_env flash_env\0"                       \
 209         "update_all=run update_env update_uboot\0"                      \
 210         "unlock_regs=mw 10000008 0; mw 10020008 0\0"                    \
 211
 212 /*
 213  * Serial Driver
 214  */
 215 #define CONFIG_MXC_UART
 216 #define CONFIG_CONS_INDEX               1
 217 #define CONFIG_BAUDRATE                 115200
 218 #define CONFIG_MXC_UART_BASE            UART1_BASE
 219
 220 /*
 221  * GPIO
 222  */
 223 #define CONFIG_MXC_GPIO
 224
 225 /*
 226  * NOR
 227  */
 228
 229 /*
 230  * NAND
 231  */
 232 #define CONFIG_NAND_MXC
 233
 234 #define CONFIG_MXC_NAND_REGS_BASE       0xD8000000
 235 #define CONFIG_SYS_NAND_BASE            CONFIG_MXC_NAND_REGS_BASE
 236 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 237
 238 #define CONFIG_MXC_NAND_HWECC
 239 #define CONFIG_SYS_NAND_LARGEPAGE
 240 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 241 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 242 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 243 #define CONFIG_SYS_NAND_PAGE_COUNT      CONFIG_SYS_NAND_BLOCK_SIZE / \
 244                                                 CONFIG_SYS_NAND_PAGE_SIZE
 245 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 246 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   11
 247 #define NAND_MAX_CHIPS                  1
 248
 249 #define CONFIG_FLASH_SHOW_PROGRESS      45
 250 #define CONFIG_SYS_NAND_QUIET           1
 251
 252 /*
 253  * Partitions & Filsystems
 254  */
 255 #define CONFIG_MTD_DEVICE
 256 #define CONFIG_MTD_PARTITIONS
 257 #define CONFIG_DOS_PARTITION
 258 #define CONFIG_SUPPORT_VFAT
 259
 260 /*
 261  * UBIFS
 262  */
 263 #define CONFIG_RBTREE
 264 #define CONFIG_LZO
 265
 266 /*
 267  * Ethernet (on SOC imx FEC)
 268  */
 269 #define CONFIG_FEC_MXC
 270 #define CONFIG_FEC_MXC_PHYADDR          0x1f
 271 #define CONFIG_MII                              /* MII PHY management   */
 272
 273 /*
 274  * FPGA
 275  */
 276 #ifndef CONFIG_SPL_BUILD
 277 #define CONFIG_FPGA
 278 #endif
 279 #define CONFIG_FPGA_COUNT               1
 280 #define CONFIG_FPGA_XILINX
 281 #define CONFIG_FPGA_SPARTAN3
 282 #define CONFIG_SYS_FPGA_WAIT            250 /* 250 ms */
 283 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 284 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 285 #define CONFIG_SYS_FPGA_CHECK_ERROR
 286
 287 /*
 288  * Fuses - IIM
 289  */
 290 #ifdef CONFIG_CMD_IMX_FUSE
 291 #define IIM_MAC_BANK            0
 292 #define IIM_MAC_ROW             5
 293 #define IIM0_SCC_KEY            11
 294 #define IIM1_SUID               1
 295 #endif
 296
 297 /*
 298  * I2C
 299  */
 300
 301 #ifdef CONFIG_CMD_I2C
 302 #define CONFIG_SYS_I2C
 303 #define CONFIG_SYS_I2C_MXC
 304 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 305 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 306 #define CONFIG_SYS_MXC_I2C1_SPEED       100000  /* 100 kHz */
 307 #define CONFIG_SYS_MXC_I2C1_SLAVE       0x7F
 308 #define CONFIG_SYS_MXC_I2C2_SPEED       100000  /* 100 kHz */
 309 #define CONFIG_SYS_MXC_I2C2_SLAVE       0x7F
 310 #define CONFIG_SYS_I2C_NOPROBES         { }
 311
 312 #ifdef CONFIG_CMD_EEPROM
 313 # define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM 24LC02 */
 314 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* bytes of address */
 315 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 316 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* msec */
 317 #endif /* CONFIG_CMD_EEPROM */
 318 #endif /* CONFIG_CMD_I2C */
 319
 320 /*
 321  * SD/MMC
 322  */
 323 #ifdef CONFIG_CMD_MMC
 324 #define CONFIG_MMC
 325 #define CONFIG_GENERIC_MMC
 326 #define CONFIG_MXC_MMC
 327 #define CONFIG_MXC_MCI_REGS_BASE        0x10014000
 328 #endif
 329
 330 /*
 331  * RTC
 332  */
 333 #ifdef CONFIG_CMD_DATE
 334 #define CONFIG_RTC_DS1374
 335 #define CONFIG_SYS_RTC_BUS_NUM          0
 336 #endif /* CONFIG_CMD_DATE */
 337
 338 /*
 339  * PLL
 340  *
 341  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
 342  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
 343  */
 344 #define CONFIG_MX27_CLK32               32768   /* 32768 or 32000 Hz crystal */
 345
 346 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
 347 /* micron 64MB */
 348 #define PHYS_SDRAM_1_SIZE                       0x04000000 /* 64 MB */
 349 #define PHYS_SDRAM_2_SIZE                       0x04000000 /* 64 MB */
 350 #endif
 351
 352 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
 353 /* micron 128MB */
 354 #define PHYS_SDRAM_1_SIZE                       0x08000000 /* 128 MB */
 355 #define PHYS_SDRAM_2_SIZE                       0x08000000 /* 128 MB */
 356 #endif
 357
 358 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
 359 /* micron 256MB */
 360 #define PHYS_SDRAM_1_SIZE                       0x10000000 /* 256 MB */
 361 #define PHYS_SDRAM_2_SIZE                       0x10000000 /* 256 MB */
 362 #endif
 363
 364 #endif /* __CONFIG_H */