include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13 #define CONFIG_SYS_THUMB_BUILD
  14
  15 #undef CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  17
  18 #define CONFIG_MACH_TYPE                4886
  19
  20 #define CONFIG_SYS_GENERIC_BOARD
  21
  22 #include <asm/arch/imx-regs.h>
  23 #include <asm/imx-common/gpio.h>
  24
  25 #ifdef CONFIG_SPL
  26 #include "imx6_spl.h"
  27 #define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  28 #endif
  29
  30 #define CONFIG_CMDLINE_TAG
  31 #define CONFIG_SETUP_MEMORY_TAGS
  32 #define CONFIG_INITRD_TAG
  33 #define CONFIG_REVISION_TAG
  34 #define CONFIG_SERIAL_TAG
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40 #define CONFIG_BOARD_LATE_INIT
  41 #define CONFIG_MISC_INIT_R
  42
  43 #define CONFIG_MXC_UART
  44 #define CONFIG_MXC_UART_BASE            UART1_BASE
  45
  46 /* Make the HW version stuff available in U-Boot env */
  47 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  48 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  49 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  50
  51 /* I2C Configs */
  52 #define CONFIG_SYS_I2C
  53 #define CONFIG_SYS_I2C_MXC
  54 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  55 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  56 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  57 #define CONFIG_SYS_I2C_SPEED            100000
  58
  59 /* OCOTP Configs */
  60 #define CONFIG_CMD_FUSE
  61 #ifdef CONFIG_CMD_FUSE
  62 #define CONFIG_MXC_OCOTP
  63 #endif
  64
  65 /* MMC Configs */
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_FSL_USDHC
  68 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  69 #define CONFIG_SYS_FSL_USDHC_NUM        3
  70
  71 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  72 #define CONFIG_GENERIC_MMC
  73 #define CONFIG_BOUNCE_BUFFER
  74 #define CONFIG_FAT_WRITE
  75 #define CONFIG_DOS_PARTITION
  76
  77 #ifdef CONFIG_MX6Q
  78 #define CONFIG_CMD_SATA
  79 #endif
  80
  81 /*
  82  * SATA Configs
  83  */
  84 #ifdef CONFIG_CMD_SATA
  85 #define CONFIG_DWC_AHSATA
  86 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  87 #define CONFIG_DWC_AHSATA_PORT_ID       0
  88 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  89 #define CONFIG_LBA48
  90 #define CONFIG_LIBATA
  91 #endif
  92
  93 /* Network */
  94 #define CONFIG_FEC_MXC
  95 #define CONFIG_MII
  96 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  97 #define CONFIG_FEC_XCV_TYPE             RGMII
  98 #define CONFIG_ETHPRIME                 "FEC"
  99 #define CONFIG_FEC_MXC_PHYADDR          6
 100 #define CONFIG_PHYLIB
 101 #define CONFIG_PHY_MICREL
 102 #define CONFIG_PHY_MICREL_KSZ9031
 103 #define CONFIG_IP_DEFRAG
 104 #define CONFIG_TFTP_BLOCKSIZE           4096
 105 #define CONFIG_TFTP_TSIZE
 106
 107 /* USB Configs */
 108 /* Host */
 109 #define CONFIG_USB_HOST_ETHER
 110 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 111 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 112 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 113 #define CONFIG_MXC_USB_FLAGS            0
 114 #define CONFIG_USB_KEYBOARD
 115 #ifdef CONFIG_USB_KEYBOARD
 116 #define CONFIG_SYS_USB_EVENT_POLL
 117 #endif /* CONFIG_USB_KEYBOARD */
 118 /* Client */
 119 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 120 #define CONFIG_USBD_HS
 121
 122 #define CONFIG_USB_GADGET_MASS_STORAGE
 123 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 124 #define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 125 /* USB DFU */
 126 #define CONFIG_DFU_MMC
 127
 128 /* Miscellaneous commands */
 129 #define CONFIG_CMD_BMODE
 130 #define CONFIG_MXC_GPIO
 131
 132 /* Framebuffer and LCD */
 133 #define CONFIG_VIDEO_IPUV3
 134 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 135 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 136 #define CONFIG_VIDEO_BMP_RLE8
 137 #define CONFIG_SPLASH_SCREEN
 138 #define CONFIG_SPLASH_SCREEN_ALIGN
 139 #define CONFIG_BMP_16BPP
 140 #define CONFIG_VIDEO_LOGO
 141 #define CONFIG_VIDEO_BMP_LOGO
 142 #define CONFIG_IPUV3_CLK                260000000
 143 #define CONFIG_CMD_HDMIDETECT
 144 #define CONFIG_CONSOLE_MUX
 145 #define CONFIG_IMX_HDMI
 146 #define CONFIG_IMX_VIDEO_SKIP
 147 #define CONFIG_CMD_BMP
 148
 149 /* allow to overwrite serial and ethaddr */
 150 #define CONFIG_ENV_OVERWRITE
 151 #define CONFIG_CONS_INDEX               1
 152 #define CONFIG_BAUDRATE                 115200
 153
 154 /* Command definition */
 155 #undef CONFIG_CMD_LOADB
 156 #undef CONFIG_CMD_LOADS
 157 #undef CONFIG_CMD_NFS
 158 #undef CONFIG_CMD_FLASH
 159
 160 #undef CONFIG_IPADDR
 161 #define CONFIG_IPADDR                   192.168.10.2
 162 #define CONFIG_NETMASK                  255.255.255.0
 163 #undef CONFIG_SERVERIP
 164 #define CONFIG_SERVERIP                 192.168.10.1
 165
 166 #define CONFIG_LOADADDR                 0x12000000
 167 #define CONFIG_SYS_TEXT_BASE            0x17800000
 168
 169 #ifdef CONFIG_CMD_SATA
 170 #define CONFIG_DRIVE_SATA "sata "
 171 #else
 172 #define CONFIG_DRIVE_SATA
 173 #endif
 174
 175 #ifdef CONFIG_CMD_MMC
 176 #define CONFIG_DRIVE_MMC "mmc "
 177 #else
 178 #define CONFIG_DRIVE_MMC
 179 #endif
 180
 181 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 182
 183 #define DFU_ALT_EMMC_INFO \
 184         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 185         "boot part 0 1;" \
 186         "rootfs part 0 2;" \
 187         "uImage fat 0 1;" \
 188         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 189         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 190
 191 #define EMMC_BOOTCMD \
 192         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 193                 "rootwait\0" \
 194         "emmcboot=run setup; " \
 195                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 196                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 197                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 198                 "${boot_file} && run fdt_fixup && " \
 199                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 200         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 201                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 202
 203 #define MEM_LAYOUT_ENV_SETTINGS \
 204         "fdt_addr_r=0x12000000\0" \
 205         "fdt_high=0xffffffff\0" \
 206         "initrd_high=0xffffffff\0" \
 207         "kernel_addr_r=0x11000000\0" \
 208         "ramdisk_addr_r=0x12100000\0"
 209
 210 #define NFS_BOOTCMD \
 211         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 212         "nfsboot=run setup; " \
 213                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 214                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 215                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 216                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 217         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 218                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 219
 220 #define SD_BOOTCMD                                              \
 221         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 222                 "rootwait\0" \
 223         "sdboot=run setup; " \
 224                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 225                 "${vidargs}; echo Booting from SD card; " \
 226                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 227                 "${boot_file} && run fdt_fixup && " \
 228                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 229         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 230                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 231
 232 #define USB_BOOTCMD \
 233         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 234                 "rootwait\0" \
 235         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 236                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 237                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 238                 "${boot_file} && run fdt_fixup && " \
 239                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 240         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 241                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 242
 243 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 244 #define FDT_FILE "imx6q-apalis-eval.dtb"
 245 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 246 #else
 247 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 248 #endif
 249 #define CONFIG_EXTRA_ENV_SETTINGS \
 250         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 251                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 252                 "usb start ;" \
 253                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 254         "boot_file=uImage\0" \
 255         "console=ttymxc0\0" \
 256         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 257         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 258         EMMC_BOOTCMD \
 259         "fdt_file=" FDT_FILE "\0" \
 260         "fdt_fixup=;\0" \
 261         MEM_LAYOUT_ENV_SETTINGS \
 262         NFS_BOOTCMD \
 263         SD_BOOTCMD \
 264         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 265                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 266                 "flash_eth.img && source ${loadaddr}\0" \
 267         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 268                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 269                 "source ${loadaddr}\0" \
 270         "setup=setenv setupargs fec_mac=${ethaddr} " \
 271                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 272                 "console=${console},${baudrate}n8\0 " \
 273         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 274         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 275                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 276                 "source ${loadaddr}\0" \
 277         "splashpos=m,m\0" \
 278         "vidargs=mxc_hdmi.only_cea=1 " \
 279                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 280                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 281                 "fbmem=32M\0 "
 282
 283 /* Miscellaneous configurable options */
 284 #define CONFIG_SYS_LONGHELP
 285 #define CONFIG_AUTO_COMPLETE
 286 #undef CONFIG_SYS_CBSIZE
 287 #define CONFIG_SYS_CBSIZE               1024
 288 #undef CONFIG_SYS_MAXARGS
 289 #define CONFIG_SYS_MAXARGS              48
 290
 291 #define CONFIG_SYS_ALT_MEMTEST
 292 #define CONFIG_SYS_MEMTEST_START        0x10000000
 293 #define CONFIG_SYS_MEMTEST_END          0x10010000
 294 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 295
 296 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 297
 298 #define CONFIG_CMDLINE_EDITING
 299
 300 /* Physical Memory Map */
 301 #define CONFIG_NR_DRAM_BANKS            1
 302 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 303
 304 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 305 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 306 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 307
 308 #define CONFIG_SYS_INIT_SP_OFFSET \
 309         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 310 #define CONFIG_SYS_INIT_SP_ADDR \
 311         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 312
 313 /* FLASH and environment organization */
 314 #define CONFIG_SYS_NO_FLASH
 315
 316 #define CONFIG_ENV_SIZE                 (8 * 1024)
 317
 318 #define CONFIG_ENV_IS_IN_MMC
 319
 320 #if defined(CONFIG_ENV_IS_IN_MMC)
 321 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 322 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 323                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 324 #define CONFIG_SYS_MMC_ENV_DEV          0
 325 #define CONFIG_SYS_MMC_ENV_PART         1
 326 #endif
 327
 328 #define CONFIG_OF_SYSTEM_SETUP
 329
 330 #define CONFIG_CMD_TIME
 331
 332 #define CONFIG_SUPPORT_RAW_INITRD
 333
 334 #define CONFIG_CRC32_VERIFY
 335
 336 #endif  /* __CONFIG_H */