1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2013-2019 Toradex, Inc.
5 * Configuration settings for the Toradex Apalis iMX6
11 #include <linux/stringify.h>
13 #include "mx6_common.h"
15 #include <asm/arch/imx-regs.h>
16 #include <asm/mach-imx/gpio.h>
22 #define CONFIG_MXC_UART_BASE UART1_BASE
25 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
26 #define CONFIG_SYS_FSL_USDHC_NUM 3
29 #define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */
33 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
34 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
35 #define CONFIG_MXC_USB_FLAGS 0
37 #define CONFIG_USBD_HS
39 /* Framebuffer and LCD */
40 #define CONFIG_IMX_HDMI
41 #define CONFIG_IMX_VIDEO_SKIP
43 /* Command definition */
46 #define CONFIG_IPADDR 192.168.10.2
47 #define CONFIG_NETMASK 255.255.255.0
48 #undef CONFIG_SERVERIP
49 #define CONFIG_SERVERIP 192.168.10.1
51 #ifndef CONFIG_SPL_BUILD
52 #define BOOT_TARGET_DEVICES(func) \
58 #include <config_distro_bootcmd.h>
59 #undef BOOTENV_RUN_NET_USB_START
60 #define BOOTENV_RUN_NET_USB_START ""
61 #else /* CONFIG_SPL_BUILD */
63 #endif /* CONFIG_SPL_BUILD */
65 #define UBOOT_UPDATE \
69 "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
70 "setexpr blkcnt ${blkcnt} / 0x200\0" \
71 "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
72 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
73 "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
74 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
76 #define MEM_LAYOUT_ENV_SETTINGS \
77 "bootm_size=0x20000000\0" \
78 "fdt_addr_r=0x12100000\0" \
79 "kernel_addr_r=0x11000000\0" \
80 "pxefile_addr_r=0x17100000\0" \
81 "ramdisk_addr_r=0x12200000\0" \
82 "scriptaddr=0x17000000\0"
84 #define CONFIG_EXTRA_ENV_SETTINGS \
86 "boot_file=zImage\0" \
87 "boot_script_dhcp=boot.scr\0" \
89 "defargs=enable_wait_mode=off vmalloc=400M\0" \
92 MEM_LAYOUT_ENV_SETTINGS \
94 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
95 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
96 "flash_eth.img && source ${loadaddr}\0" \
97 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
98 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
99 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
100 " ${loadaddr} flash_blk.img && " \
101 "source ${loadaddr}\0" \
102 "setup=setenv setupargs fec_mac=${ethaddr} " \
103 "consoleblank=0 no_console_suspend=1 console=tty1 " \
104 "console=${console},${baudrate}n8\0 " \
105 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
106 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
107 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
108 "source ${loadaddr}\0" \
110 "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
111 "vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
113 /* Miscellaneous configurable options */
115 /* Physical Memory Map */
116 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
118 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
119 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
120 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
122 #endif /* __CONFIG_H */