include/configs/apalis-tk1.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2017 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis TK1 modules.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/sizes.h>
  12
  13 #include "tegra124-common.h"
  14
  15 /* Board-specific serial config */
  16 #define CONFIG_TEGRA_ENABLE_UARTA
  17 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTA_BASE
  18
  19 #define FDT_MODULE                      "apalis-v1.2"
  20 #define FDT_MODULE_V1_0                 "apalis"
  21
  22 /* PCI host support */
  23 #undef CONFIG_PCI_SCAN_SHOW
  24
  25 /*
  26  * Custom Distro Boot configuration:
  27  * 1. 8bit SD port (MMC1)
  28  * 2. 4bit SD port (MMC2)
  29  * 3. eMMC (MMC0)
  30  */
  31 #define BOOT_TARGET_DEVICES(func) \
  32         func(MMC, mmc, 1) \
  33         func(MMC, mmc, 2) \
  34         func(MMC, mmc, 0) \
  35         func(USB, usb, 0) \
  36         func(PXE, pxe, na) \
  37         func(DHCP, dhcp, na)
  38
  39 #undef CONFIG_IPADDR
  40 #define CONFIG_IPADDR           192.168.10.2
  41 #define CONFIG_NETMASK          255.255.255.0
  42 #undef CONFIG_SERVERIP
  43 #define CONFIG_SERVERIP         192.168.10.1
  44
  45 #define DFU_ALT_EMMC_INFO       "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
  46                                 "boot part 0 1 mmcpart 0; " \
  47                                 "rootfs part 0 2 mmcpart 0; " \
  48                                 "zImage fat 0 1 mmcpart 0; " \
  49                                 "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
  50
  51 #define UBOOT_UPDATE \
  52         "uboot_hwpart=1\0" \
  53         "uboot_blk=0\0" \
  54         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  55                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  56         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  57                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
  58
  59 #define BOARD_EXTRA_ENV_SETTINGS \
  60         "boot_file=zImage\0" \
  61         "boot_script_dhcp=boot.scr\0" \
  62         "console=ttyS0\0" \
  63         "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
  64                 "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
  65                 "user_debug=30 pcie_aspm=off\0" \
  66         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
  67         "fdt_board=eval\0" \
  68         "fdt_fixup=;\0" \
  69         "fdt_module=" FDT_MODULE "\0" \
  70         UBOOT_UPDATE \
  71         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
  72                 "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
  73                 "flash_eth.img && source ${loadaddr}\0" \
  74         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
  75                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
  76                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
  77                 "${loadaddr} flash_blk.img && " \
  78                 "source ${loadaddr}\0" \
  79         "setup=setenv setupargs igb_mac=${ethaddr} " \
  80                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
  81                 "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
  82                 "${memargs}\0" \
  83         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
  84         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
  85                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
  86                 "source ${loadaddr}\0" \
  87         "vidargs=fbcon=map:1\0"
  88
  89 #include "tegra-common-post.h"
  90
  91 #endif /* __CONFIG_H */