include/configs/apalis-tk1.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2017 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis TK1 modules.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/sizes.h>
  12
  13 #include "tegra124-common.h"
  14
  15 #define CONFIG_ARCH_MISC_INIT
  16
  17 /* Board-specific serial config */
  18 #define CONFIG_TEGRA_ENABLE_UARTA
  19 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTA_BASE
  20
  21 #define FDT_MODULE                      "apalis-v1.2"
  22 #define FDT_MODULE_V1_0                 "apalis"
  23
  24 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
  25 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
  26                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
  27 #define CONFIG_SYS_MMC_ENV_DEV          0
  28 #define CONFIG_SYS_MMC_ENV_PART         1
  29
  30 /* PCI host support */
  31 #undef CONFIG_PCI_SCAN_SHOW
  32
  33 /* PCI networking support */
  34 #define CONFIG_E1000_NO_NVM
  35
  36 /* General networking support */
  37 #define CONFIG_TFTP_TSIZE
  38
  39 #undef CONFIG_IPADDR
  40 #define CONFIG_IPADDR           192.168.10.2
  41 #define CONFIG_NETMASK          255.255.255.0
  42 #undef CONFIG_SERVERIP
  43 #define CONFIG_SERVERIP         192.168.10.1
  44
  45 #define DFU_ALT_EMMC_INFO       "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
  46                                 "boot part 0 1 mmcpart 0; " \
  47                                 "rootfs part 0 2 mmcpart 0; " \
  48                                 "zImage fat 0 1 mmcpart 0; " \
  49                                 "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
  50
  51 #define EMMC_BOOTCMD \
  52         "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
  53                 "ro rootfstype=ext4 rootwait\0" \
  54         "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
  55                 "setenv bootargs ${defargs} ${emmcargs} " \
  56                 "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
  57                 "run emmcdtbload; " \
  58                 "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
  59                 "${boot_file} && run fdt_fixup && " \
  60                 "bootz ${kernel_addr_r} - ${dtbparam}\0" \
  61         "emmcbootpart=1\0" \
  62         "emmcdev=0\0" \
  63         "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
  64                 "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
  65                 "setenv dtbparam ${fdt_addr_r}\0" \
  66         "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
  67         "emmcrootpart=2\0"
  68
  69 #define NFS_BOOTCMD \
  70         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
  71         "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
  72                 "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
  73                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
  74                 "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
  75         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
  76                 "${soc}-${fdt_module}-${fdt_board}.dtb " \
  77                 "&& setenv dtbparam ${fdt_addr_r}\0"
  78
  79 #define SD_BOOTCMD \
  80         "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
  81         "rootfstype=ext4 rootwait\0" \
  82         "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
  83                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
  84                 "${vidargs}; echo Booting from SD card in 8bit slot...; " \
  85                 "run sddtbload; load mmc ${sddev}:${sdbootpart} " \
  86                 "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
  87                 "bootz ${kernel_addr_r} - ${dtbparam}\0" \
  88         "sdbootpart=1\0" \
  89         "sddev=1\0" \
  90         "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
  91                 "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
  92                 "&& setenv dtbparam ${fdt_addr_r}\0" \
  93         "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
  94         "sdrootpart=2\0"
  95
  96 #define BOARD_EXTRA_ENV_SETTINGS \
  97         "boot_file=zImage\0" \
  98         "console=ttyS0\0" \
  99         "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
 100                 "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
 101                 "user_debug=30 pcie_aspm=off\0" \
 102         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 103         EMMC_BOOTCMD \
 104         "fdt_board=eval\0" \
 105         "fdt_fixup=;\0" \
 106         "fdt_module=" FDT_MODULE "\0" \
 107         NFS_BOOTCMD \
 108         SD_BOOTCMD \
 109         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 110                 "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 111                 "flash_eth.img && source ${loadaddr}\0" \
 112         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
 113                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
 114                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
 115                 "${loadaddr} flash_blk.img && " \
 116                 "source ${loadaddr}\0" \
 117         "setup=setenv setupargs igb_mac=${ethaddr} " \
 118                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 119                 "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
 120                 "${memargs}\0" \
 121         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 122         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 123                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 124                 "source ${loadaddr}\0" \
 125         "vidargs=fbcon=map:1\0"
 126
 127 /* Increase console I/O buffer size */
 128 #undef CONFIG_SYS_CBSIZE
 129 #define CONFIG_SYS_CBSIZE               1024
 130
 131 /* Increase arguments buffer size */
 132 #undef CONFIG_SYS_BARGSIZE
 133 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 134
 135 /* Increase maximum number of arguments */
 136 #undef CONFIG_SYS_MAXARGS
 137 #define CONFIG_SYS_MAXARGS              32
 138
 139 #define CONFIG_CMD_TIME
 140
 141 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 142
 143 #include "tegra-common-usb-gadget.h"
 144 #include "tegra-common-post.h"
 145
 146 /* Reserve top 1M for secure RAM */
 147 #define CONFIG_ARMV7_SECURE_BASE                0xfff00000
 148 #define CONFIG_ARMV7_SECURE_RESERVE_SIZE        0x00100000
 149
 150 #endif /* __CONFIG_H */