include/configs/apalis-tk1.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2017 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis TK1 modules.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/sizes.h>
  12
  13 #include "tegra124-common.h"
  14
  15 #define CONFIG_ARCH_MISC_INIT
  16
  17 /* Board-specific serial config */
  18 #define CONFIG_TEGRA_ENABLE_UARTA
  19 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTA_BASE
  20
  21 #define FDT_MODULE                      "apalis-v1.2"
  22 #define FDT_MODULE_V1_0                 "apalis"
  23
  24 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
  25 #define CONFIG_SYS_MMC_ENV_DEV          0
  26 #define CONFIG_SYS_MMC_ENV_PART         1
  27
  28 /* PCI host support */
  29 #undef CONFIG_PCI_SCAN_SHOW
  30
  31 /* PCI networking support */
  32 #define CONFIG_E1000_NO_NVM
  33
  34 /* General networking support */
  35 #define CONFIG_TFTP_TSIZE
  36
  37 #undef CONFIG_IPADDR
  38 #define CONFIG_IPADDR           192.168.10.2
  39 #define CONFIG_NETMASK          255.255.255.0
  40 #undef CONFIG_SERVERIP
  41 #define CONFIG_SERVERIP         192.168.10.1
  42
  43 #define DFU_ALT_EMMC_INFO       "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
  44                                 "boot part 0 1 mmcpart 0; " \
  45                                 "rootfs part 0 2 mmcpart 0; " \
  46                                 "zImage fat 0 1 mmcpart 0; " \
  47                                 "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
  48
  49 #define UBOOT_UPDATE \
  50         "uboot_hwpart=1\0" \
  51         "uboot_blk=0\0" \
  52         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  53                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  54         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  55                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
  56
  57 #define EMMC_BOOTCMD \
  58         "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
  59                 "ro rootfstype=ext4 rootwait\0" \
  60         "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
  61                 "setenv bootargs ${defargs} ${emmcargs} " \
  62                 "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
  63                 "run emmcdtbload; " \
  64                 "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
  65                 "${boot_file} && run fdt_fixup && " \
  66                 "bootz ${kernel_addr_r} - ${dtbparam}\0" \
  67         "emmcbootpart=1\0" \
  68         "emmcdev=0\0" \
  69         "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
  70                 "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
  71                 "setenv dtbparam ${fdt_addr_r}\0" \
  72         "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
  73         "emmcrootpart=2\0"
  74
  75 #define NFS_BOOTCMD \
  76         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
  77         "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
  78                 "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
  79                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
  80                 "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
  81         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
  82                 "${soc}-${fdt_module}-${fdt_board}.dtb " \
  83                 "&& setenv dtbparam ${fdt_addr_r}\0"
  84
  85 #define SD_BOOTCMD \
  86         "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
  87         "rootfstype=ext4 rootwait\0" \
  88         "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
  89                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
  90                 "${vidargs}; echo Booting from SD card in 8bit slot...; " \
  91                 "run sddtbload; load mmc ${sddev}:${sdbootpart} " \
  92                 "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
  93                 "bootz ${kernel_addr_r} - ${dtbparam}\0" \
  94         "sdbootpart=1\0" \
  95         "sddev=1\0" \
  96         "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
  97                 "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
  98                 "&& setenv dtbparam ${fdt_addr_r}\0" \
  99         "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
 100         "sdrootpart=2\0"
 101
 102 #define BOARD_EXTRA_ENV_SETTINGS \
 103         "boot_file=zImage\0" \
 104         "console=ttyS0\0" \
 105         "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
 106                 "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
 107                 "user_debug=30 pcie_aspm=off\0" \
 108         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 109         EMMC_BOOTCMD \
 110         "fdt_board=eval\0" \
 111         "fdt_fixup=;\0" \
 112         "fdt_module=" FDT_MODULE "\0" \
 113         NFS_BOOTCMD \
 114         SD_BOOTCMD \
 115         UBOOT_UPDATE \
 116         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 117                 "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 118                 "flash_eth.img && source ${loadaddr}\0" \
 119         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
 120                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
 121                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
 122                 "${loadaddr} flash_blk.img && " \
 123                 "source ${loadaddr}\0" \
 124         "setup=setenv setupargs igb_mac=${ethaddr} " \
 125                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 126                 "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
 127                 "${memargs}\0" \
 128         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 129         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 130                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 131                 "source ${loadaddr}\0" \
 132         "vidargs=fbcon=map:1\0"
 133
 134 /* Increase console I/O buffer size */
 135 #undef CONFIG_SYS_CBSIZE
 136 #define CONFIG_SYS_CBSIZE               1024
 137
 138 /* Increase arguments buffer size */
 139 #undef CONFIG_SYS_BARGSIZE
 140 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 141
 142 /* Increase maximum number of arguments */
 143 #undef CONFIG_SYS_MAXARGS
 144 #define CONFIG_SYS_MAXARGS              32
 145
 146 #define CONFIG_CMD_TIME
 147
 148 #include "tegra-common-usb-gadget.h"
 149 #include "tegra-common-post.h"
 150
 151 /* Reserve top 1M for secure RAM */
 152 #define CONFIG_ARMV7_SECURE_BASE                0xfff00000
 153 #define CONFIG_ARMV7_SECURE_RESERVE_SIZE        0x00100000
 154
 155 #endif /* __CONFIG_H */