include/configs/apalis-tk1.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2017 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis TK1 modules.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/sizes.h>
  12
  13 #include "tegra124-common.h"
  14
  15 /* Board-specific serial config */
  16 #define CFG_SYS_NS16550_COM1            NV_PA_APB_UARTA_BASE
  17
  18 #define FDT_MODULE                      "apalis-v1.2"
  19 #define FDT_MODULE_V1_0                 "apalis"
  20
  21 /*
  22  * Custom Distro Boot configuration:
  23  * 1. 8bit SD port (MMC1)
  24  * 2. 4bit SD port (MMC2)
  25  * 3. eMMC (MMC0)
  26  */
  27 #define BOOT_TARGET_DEVICES(func) \
  28         func(MMC, mmc, 1) \
  29         func(MMC, mmc, 2) \
  30         func(MMC, mmc, 0) \
  31         func(USB, usb, 0) \
  32         func(PXE, pxe, na) \
  33         func(DHCP, dhcp, na)
  34
  35 #define DFU_ALT_EMMC_INFO       "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
  36                                 "boot part 0 1 mmcpart 0; " \
  37                                 "rootfs part 0 2 mmcpart 0; " \
  38                                 "zImage fat 0 1 mmcpart 0; " \
  39                                 "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
  40
  41 #define UBOOT_UPDATE \
  42         "uboot_hwpart=1\0" \
  43         "uboot_blk=0\0" \
  44         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  45                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  46         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  47                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
  48
  49 #define BOARD_EXTRA_ENV_SETTINGS \
  50         "boot_file=zImage\0" \
  51         "boot_script_dhcp=boot.scr\0" \
  52         "console=ttyS0\0" \
  53         "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
  54                 "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
  55                 "user_debug=30 pcie_aspm=off\0" \
  56         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
  57         "fdt_board=eval\0" \
  58         "fdt_fixup=;\0" \
  59         "fdt_module=" FDT_MODULE "\0" \
  60         UBOOT_UPDATE \
  61         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
  62                 "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
  63                 "flash_eth.img && source ${loadaddr}\0" \
  64         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
  65                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
  66                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
  67                 "${loadaddr} flash_blk.img && " \
  68                 "source ${loadaddr}\0" \
  69         "setup=setenv setupargs igb_mac=${ethaddr} " \
  70                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
  71                 "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
  72                 "${memargs}\0" \
  73         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
  74         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
  75                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
  76                 "source ${loadaddr}\0" \
  77         "vidargs=fbcon=map:1\0"
  78
  79 #include "tegra-common-post.h"
  80
  81 #endif /* __CONFIG_H */