1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Configuration header file for K3 AM654 EVM
5 * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
6 * Lokesh Vutla <lokeshvutla@ti.com>
9 #ifndef __CONFIG_AM654_EVM_H
10 #define __CONFIG_AM654_EVM_H
12 #include <linux/sizes.h>
13 #include <environment/ti/mmc.h>
14 #include <environment/ti/k3_rproc.h>
15 #include <environment/ti/k3_dfu.h>
17 /* DDR Configuration */
18 #define CONFIG_SYS_SDRAM_BASE1 0x880000000
20 /* SPL Loader Configuration */
21 #ifdef CONFIG_TARGET_AM654_A53_EVM
22 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M)
25 * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
26 * possible (to allow the build to go through), as this directly affects
27 * our memory footprint. The less we use for BSS the more we have available
28 * for everything else.
30 #define CONFIG_SPL_BSS_MAX_SIZE 0xc00
32 * Link BSS to be within SPL in a dedicated region located near the top of
33 * the MCU SRAM, this way making it available also before relocation. Note
34 * that we are not using the actual top of the MCU SRAM as there is a memory
35 * location filled in by the boot ROM that we want to read out without any
36 * interference from the C context.
38 #define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
39 CONFIG_SPL_BSS_MAX_SIZE)
40 /* Set the stack right below the SPL BSS section */
41 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR
42 /* Configure R5 SPL post-relocation malloc pool in DDR */
43 #define CONFIG_SYS_SPL_MALLOC_START 0x84000000
44 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
47 #ifdef CONFIG_SYS_K3_SPL_ATF
48 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
51 #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
53 #define CONFIG_SYS_BOOTM_LEN SZ_64M
55 #define PARTS_DEFAULT \
56 /* Linux partitions */ \
57 "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
59 /* U-Boot general configuration */
60 #define EXTRA_ENV_AM65X_BOARD_SETTINGS \
62 "setenv name_fdt k3-am654-base-board.dtb;" \
63 "setenv fdtfile ${name_fdt}\0" \
65 "console=ttyS2,115200n8\0" \
66 "stdin=serial,usbkbd\0" \
67 "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \
69 "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
71 /* U-Boot MMC-specific configuration */
72 #define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
78 "init_mmc=run args_all args_mmc\0" \
79 "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
81 "fdt address ${fdtaddr};" \
82 "fdt resize 0x100000;" \
83 "for overlay in $name_overlays;" \
85 "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay};" \
86 "fdt apply ${dtboaddr};" \
88 "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
89 "${bootdir}/${name_kern}\0" \
90 "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \
91 "${bootdir}/${name_fit}\0" \
92 "partitions=" PARTS_DEFAULT
97 #define DEFAULT_RPROCS "" \
98 "0 /lib/firmware/am65x-mcu-r5f0_0-fw " \
99 "1 /lib/firmware/am65x-mcu-r5f0_1-fw "
101 #ifdef CONFIG_TARGET_AM654_A53_EVM
102 #define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD \
103 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
104 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
106 #define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD
109 #define EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI \
110 "init_ubi=run args_all args_ubi; sf probe; " \
111 "ubi part ospi.rootfs; ubifsmount ubi:rootfs;\0" \
112 "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0" \
113 "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0" \
114 "args_ubi=setenv bootargs console=${console} ${optargs} " \
115 "rootfstype=ubifs root=ubi0:rootfs rw ubi.mtd=ospi.rootfs\0"
117 #define EXTRA_ENV_DFUARGS \
123 #ifdef CONFIG_TARGET_AM654_A53_EVM
124 #define BOOT_TARGET_DEVICES(func) \
128 #include <config_distro_bootcmd.h>
133 /* Incorporate settings into the U-Boot environment */
134 #define CONFIG_EXTRA_ENV_SETTINGS \
135 DEFAULT_LINUX_BOOT_ENV \
136 DEFAULT_MMC_TI_ARGS \
137 DEFAULT_FIT_TI_ARGS \
138 EXTRA_ENV_AM65X_BOARD_SETTINGS \
139 EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
140 EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD \
141 EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI \
142 EXTRA_ENV_RPROC_SETTINGS \
146 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
148 /* Now for the remaining common defines */
149 #include <configs/ti_armv7_common.h>
151 #endif /* __CONFIG_AM654_EVM_H */