3 * Texas Instruments Incorporated.
4 * Felipe Balbi <balbi@ti.com>
6 * Configuration settings for the TI Beagle x15 board.
7 * See ti_omap5_common.h for omap5 common settings.
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_AM57XX_EVM_H
13 #define __CONFIG_AM57XX_EVM_H
15 #include <environment/ti/dfu.h>
16 #include <linux/sizes.h>
18 #define CONFIG_IODELAY_RECALIBRATION
20 #define CONFIG_NR_DRAM_BANKS 2
22 /* MMC ENV related defines */
23 #define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */
24 #define CONFIG_SYS_MMC_ENV_PART 0
25 #define CONFIG_ENV_SIZE SZ_128K
26 #define CONFIG_ENV_OFFSET 0x260000
27 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
28 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
30 #define CONSOLEDEV "ttyO2"
31 #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
32 #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
33 #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
35 #define CONFIG_ENV_EEPROM_IS_ON_I2C
36 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
37 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
39 #define CONFIG_SYS_OMAP_ABE_SYSCK
41 /* Define the default GPT table for eMMC */
42 #define PARTS_DEFAULT \
43 /* Linux partitions */ \
44 "uuid_disk=${uuid_gpt_disk};" \
45 "name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
46 "name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
47 /* Android partitions */ \
48 "partitions_android=" \
49 "uuid_disk=${uuid_gpt_disk};" \
50 "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
51 "name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
52 "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
53 "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
54 "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
55 "name=efs,size=16M,uuid=${uuid_gpt_efs};" \
56 "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
57 "name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
58 "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
59 "name=system,size=768M,uuid=${uuid_gpt_system};" \
60 "name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
61 "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
62 "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
63 "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
64 "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
67 "dfu_bufsiz=0x10000\0" \
72 #include <configs/ti_omap5_common.h>
74 /* Enhance our eMMC support / experience. */
75 #define CONFIG_HSMMC2_8BIT
78 #define CONFIG_BOOTP_DNS2
79 #define CONFIG_BOOTP_SEND_HOSTNAME
80 #define CONFIG_NET_RETRY_COUNT 10
81 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
82 #define CONFIG_MII /* Required in net/eth.c */
83 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
85 #define CONFIG_SUPPORT_EMMC_BOOT
88 #define CONFIG_USB_XHCI_OMAP
90 #define CONFIG_OMAP_USB3PHY1_HOST
93 #define CONFIG_SCSI_AHCI_PLAT
94 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
95 #define CONFIG_SYS_SCSI_MAX_LUN 1
96 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
97 CONFIG_SYS_SCSI_MAX_LUN)
100 * Default to using SPI for environment, etc.
101 * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
102 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
103 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
104 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
105 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
106 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
107 * 0x9E0000 - 0x2000000 : USERLAND
109 #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
110 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
111 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
114 #define CONFIG_TI_EDMA3
115 #define CONFIG_SPL_SPI_LOAD
116 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
119 #define CONFIG_TI_SPI_MMAP
120 #define CONFIG_SF_DEFAULT_SPEED 76800000
121 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
122 #define CONFIG_QSPI_QUAD_SUPPORT
124 #endif /* __CONFIG_AM57XX_EVM_H */