include/configs/am57xx_evm.h

   1 /*
   2  * (C) Copyright 2014
   3  * Texas Instruments Incorporated.
   4  * Felipe Balbi <balbi@ti.com>
   5  *
   6  * Configuration settings for the TI Beagle x15 board.
   7  * See ti_omap5_common.h for omap5 common settings.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_AM57XX_EVM_H
  13 #define __CONFIG_AM57XX_EVM_H
  14
  15 #include <environment/ti/dfu.h>
  16
  17 #define CONFIG_DRA7XX
  18
  19 #ifdef CONFIG_SPL_BUILD
  20 #define CONFIG_IODELAY_RECALIBRATION
  21 #endif
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24
  25 #define CONFIG_NR_DRAM_BANKS            2
  26
  27 #define CONFIG_ENV_SIZE                 (64 << 10)
  28 #define CONFIG_ENV_IS_IN_FAT
  29 #define FAT_ENV_INTERFACE               "mmc"
  30 #define FAT_ENV_DEVICE_AND_PART         "0:1"
  31 #define FAT_ENV_FILE                    "uboot.env"
  32
  33 #define CONSOLEDEV                      "ttyO2"
  34 #define CONFIG_SYS_NS16550_COM1         UART1_BASE      /* Base EVM has UART0 */
  35 #define CONFIG_SYS_NS16550_COM2         UART2_BASE      /* UART2 */
  36 #define CONFIG_SYS_NS16550_COM3         UART3_BASE      /* UART3 */
  37 #define CONFIG_BAUDRATE                 115200
  38
  39 #define CONFIG_SYS_OMAP_ABE_SYSCK
  40
  41 /* Define the default GPT table for eMMC */
  42 #define PARTS_DEFAULT \
  43         /* Linux partitions */ \
  44         "uuid_disk=${uuid_gpt_disk};" \
  45         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  46         /* Android partitions */ \
  47         "partitions_android=" \
  48         "uuid_disk=${uuid_gpt_disk};" \
  49         "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
  50         "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
  51         "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
  52         "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
  53         "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
  54         "name=efs,size=16M,uuid=${uuid_gpt_efs};" \
  55         "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
  56         "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
  57         "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
  58         "name=system,size=768M,uuid=${uuid_gpt_system};" \
  59         "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
  60         "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
  61         "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
  62         "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
  63
  64 #define DFUARGS \
  65         "dfu_bufsiz=0x10000\0" \
  66         DFU_ALT_INFO_MMC \
  67         DFU_ALT_INFO_EMMC \
  68         DFU_ALT_INFO_RAM \
  69
  70 #include <configs/ti_omap5_common.h>
  71
  72 /* Enhance our eMMC support / experience. */
  73 #define CONFIG_CMD_GPT
  74 #define CONFIG_EFI_PARTITION
  75 #define CONFIG_RANDOM_UUID
  76 #define CONFIG_HSMMC2_8BIT
  77
  78 /* CPSW Ethernet */
  79 #define CONFIG_BOOTP_DNS                /* Configurable parts of CMD_DHCP */
  80 #define CONFIG_BOOTP_DNS2
  81 #define CONFIG_BOOTP_SEND_HOSTNAME
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_SUBNETMASK
  84 #define CONFIG_NET_RETRY_COUNT          10
  85 #define CONFIG_DRIVER_TI_CPSW           /* Driver for IP block */
  86 #define CONFIG_MII                      /* Required in net/eth.c */
  87 #define CONFIG_PHY_GIGE                 /* per-board part of CPSW */
  88 #define CONFIG_PHYLIB
  89 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs longer aneg time at 1G */
  90
  91 #define CONFIG_SUPPORT_EMMC_BOOT
  92
  93 /* USB xHCI HOST */
  94 #define CONFIG_USB_XHCI_OMAP
  95 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
  96
  97 #define CONFIG_OMAP_USB_PHY
  98 #define CONFIG_OMAP_USB3PHY1_HOST
  99
 100 /* SATA */
 101 #define CONFIG_SCSI
 102 #define CONFIG_LIBATA
 103 #define CONFIG_SCSI_AHCI
 104 #define CONFIG_SCSI_AHCI_PLAT
 105 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 106 #define CONFIG_SYS_SCSI_MAX_LUN         1
 107 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 108                                                 CONFIG_SYS_SCSI_MAX_LUN)
 109
 110 /* EEPROM */
 111 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50
 112 #define CONFIG_EEPROM_BUS_ADDRESS 0
 113
 114 /*
 115  * Default to using SPI for environment, etc.
 116  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
 117  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
 118  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
 119  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
 120  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
 121  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
 122  * 0x9E0000 - 0x2000000 : USERLAND
 123  */
 124 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
 125 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
 126 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 127
 128 #ifdef CONFIG_SPL_BUILD
 129 #undef CONFIG_DM_SPI
 130 #undef CONFIG_DM_SPI_FLASH
 131 #endif
 132
 133 /* SPI SPL */
 134 #define CONFIG_TI_EDMA3
 135 #define CONFIG_SPL_SPI_LOAD
 136 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 137
 138 /* SPI */
 139 #undef  CONFIG_OMAP3_SPI
 140 #define CONFIG_TI_SPI_MMAP
 141 #define CONFIG_SF_DEFAULT_SPEED                76800000
 142 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 143 #define CONFIG_QSPI_QUAD_SUPPORT
 144
 145 #endif /* __CONFIG_AM57XX_EVM_H */