1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * am3517_evm.h - Default configuration for AM3517 EVM board.
5 * Author: Vaibhav Hiremath <hvaibhav@ti.com>
7 * Based on omap3_evm_config.h
9 * Copyright (C) 2010 Texas Instruments Incorporated
16 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
17 * 64 bytes before this address should be set aside for u-boot.img's
18 * header. That is 0x800FFFC0--0x80100000 should not be used for any
22 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
23 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
25 #include <configs/ti_omap3_common.h>
26 #undef CONFIG_SDRC /* Disable SDRC since we have EMIF4 */
28 #define CONFIG_MISC_INIT_R
29 #define CONFIG_REVISION_TAG
31 /* Hardware drivers */
33 /* allow to overwrite serial and ethaddr */
34 #define CONFIG_ENV_OVERWRITE
38 * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
39 * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
42 #ifdef CONFIG_USB_MUSB_AM35X
44 #ifdef CONFIG_USB_MUSB_HOST
46 #ifdef CONFIG_USB_KEYBOARD
47 #define CONFIG_PREBOOT "usb start"
48 #endif /* CONFIG_USB_KEYBOARD */
50 #endif /* CONFIG_USB_MUSB_HOST */
52 #endif /* CONFIG_USB_MUSB_AM35X */
57 #define CONFIG_DRIVER_TI_EMAC
58 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
60 #define CONFIG_BOOTP_DEFAULT
61 #define CONFIG_BOOTP_DNS2
62 #define CONFIG_BOOTP_SEND_HOSTNAME
63 #define CONFIG_NET_RETRY_COUNT 10
65 /* Board NAND Info. */
67 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
68 #define CONFIG_SYS_NAND_PAGE_COUNT 64
69 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
70 #define CONFIG_SYS_NAND_OOBSIZE 64
71 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
72 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
73 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \
74 11, 12, 13, 14, 16, 17, 18, 19, 20, \
75 21, 22, 23, 24, 25, 26, 27, 28, 30, \
76 31, 32, 33, 34, 35, 36, 37, 38, 39, \
77 40, 41, 42, 44, 45, 46, 47, 48, 49, \
78 50, 51, 52, 53, 54, 55, 56 }
80 #define CONFIG_SYS_NAND_ECCSIZE 512
81 #define CONFIG_SYS_NAND_ECCBYTES 13
82 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
83 #define CONFIG_SYS_NAND_MAX_OOBFREE 2
84 #define CONFIG_SYS_NAND_MAX_ECCPOS 56
85 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
86 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
87 /* NAND block size is 128 KiB. Synchronize these values with
88 * corresponding Device Tree entries in Linux:
89 * MLO(SPL) 4 * NAND_BLOCK_SIZE = 512 KiB @ 0x000000
90 * U-Boot 15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
91 * U-Boot environment 2 * NAND_BLOCK_SIZE = 256 KiB @ 0x260000
92 * Kernel 64 * NAND_BLOCK_SIZE = 8 MiB @ 0x2A0000
93 * DTB 4 * NAND_BLOCK_SIZE = 512 KiB @ 0xAA0000
94 * RootFS Remaining Flash Space @ 0xB20000
96 #endif /* CONFIG_NAND */
98 /* Environment information */
100 #define CONFIG_BOOTFILE "uImage"
102 #define CONFIG_EXTRA_ENV_SETTINGS \
103 "loadaddr=0x82000000\0" \
104 "console=ttyO2,115200n8\0" \
105 "fdtfile=am3517-evm.dtb\0" \
106 "fdtaddr=0x82C00000\0" \
108 "bootenv=uEnv.txt\0" \
111 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
112 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
115 "mmcroot=/dev/mmcblk0p2 rw\0" \
116 "mmcrootfstype=ext4 rootwait fixrtc\0" \
117 "mmcargs=setenv bootargs console=${console} " \
121 "rootfstype=${mmcrootfstype} " \
123 "nandargs=setenv bootargs console=${console} " \
126 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
127 "rootfstype=ubifs rootwait " \
129 "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
130 "importbootenv=echo Importing environment from mmc ...; " \
131 "env import -t ${loadaddr} ${filesize}\0" \
132 "bootscript=echo Running bootscript from mmc ...; " \
133 "source ${loadaddr}\0" \
134 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
135 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
136 "mmcboot=echo Booting from mmc ...; " \
138 "bootz ${loadaddr} - ${fdtaddr}\0" \
139 "nandboot=echo Booting from nand ...; " \
141 "nand read ${loadaddr} 2a0000 800000; " \
142 "nand read ${fdtaddr} aa0000 80000; " \
143 "bootm ${loadaddr} - ${fdtaddr}\0" \
145 #define CONFIG_BOOTCOMMAND \
146 "mmc dev ${mmcdev}; if mmc rescan; then " \
147 "echo SD/MMC found on device $mmcdev; " \
148 "if run loadbootenv; then " \
149 "run importbootenv; " \
151 "echo Checking if uenvcmd is set ...; " \
152 "if test -n $uenvcmd; then " \
153 "echo Running uenvcmd ...; " \
156 "echo Running default loadimage ...; " \
157 "setenv bootfile zImage; " \
158 "if run loadimage; then " \
162 "else run nandboot; fi"
164 /* Miscellaneous configurable options */
166 /* We set the max number of command args high to avoid HUSH bugs. */
167 #define CONFIG_SYS_MAXARGS 64
169 /* Print Buffer Size */
170 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
171 + sizeof(CONFIG_SYS_PROMPT) + 16)
172 /* Boot Argument Buffer Size */
173 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
175 /* memtest works on */
176 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
177 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
178 0x01F00000) /* 31MB */
180 /* Physical Memory Map */
181 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
182 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
183 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
185 /* FLASH and environment organization */
187 /* **** PISMO SUPPORT *** */
188 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
190 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
191 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
193 #if defined(CONFIG_NAND)
194 #define CONFIG_SYS_FLASH_BASE NAND_BASE
197 /* Monitor at start of flash */
198 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
200 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
201 #define CONFIG_ENV_SIZE CONFIG_SYS_ENV_SECT_SIZE
202 #define CONFIG_ENV_OFFSET 0x260000
203 #define CONFIG_ENV_ADDR 0x260000
205 /* Defines for SPL */
206 #undef CONFIG_SPL_TEXT_BASE
207 #define CONFIG_SPL_TEXT_BASE 0x40200000
209 #undef CONFIG_SPL_BSS_START_ADDR
210 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
211 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
213 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
214 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
216 #define CONFIG_SPL_NAND_BASE
217 #define CONFIG_SPL_NAND_DRIVERS
218 #define CONFIG_SPL_NAND_ECC
220 #endif /* __CONFIG_H */