include/configs/am3517_evm.h

   1 /*
   2  * am3517_evm.h - Default configuration for AM3517 EVM board.
   3  *
   4  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   5  *
   6  * Based on omap3_evm_config.h
   7  *
   8  * Copyright (C) 2010 Texas Instruments Incorporated
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /* High Level Configuration Options */
  17
  18 #define CONFIG_OMAP
  19 #define CONFIG_OMAP_COMMON
  20
  21 #define CONFIG_SYS_NO_FLASH
  22
  23 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  24
  25 /* Common ARM Erratas */
  26 #define CONFIG_ARM_ERRATA_454179
  27 #define CONFIG_ARM_ERRATA_430973
  28 #define CONFIG_ARM_ERRATA_621766
  29
  30 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  31
  32 /*
  33  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  34  * 64 bytes before this address should be set aside for u-boot.img's
  35  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  36  * other needs.
  37  */
  38 #define CONFIG_SYS_TEXT_BASE            0x80100000
  39 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  40 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  41
  42 #include <asm/arch/cpu.h>               /* get chip and board defs */
  43 #include <asm/arch/omap.h>
  44
  45 #define CONFIG_MISC_INIT_R
  46 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  47 #define CONFIG_SETUP_MEMORY_TAGS
  48 #define CONFIG_INITRD_TAG
  49 #define CONFIG_REVISION_TAG
  50
  51 /* Clock Defines */
  52 #define V_OSCK                  26000000        /* Clock output from T2 */
  53 #define V_SCLK                  (V_OSCK >> 1)
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (16 << 20)
  57
  58 /* Hardware drivers */
  59
  60 /* OMAP GPIO configuration */
  61 #define CONFIG_OMAP_GPIO
  62
  63 /* NS16550 Configuration */
  64 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  65 #define CONFIG_SYS_NS16550_SERIAL
  66 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  67 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  68
  69 /* select serial console configuration */
  70 #define CONFIG_CONS_INDEX               3
  71 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  72 #define CONFIG_SERIAL3                  3       /* UART3 on AM3517 EVM */
  73
  74 /* allow to overwrite serial and ethaddr */
  75 #define CONFIG_ENV_OVERWRITE
  76 #define CONFIG_BAUDRATE                 115200
  77 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  78                                         115200}
  79
  80 /* SD/MMC */
  81 #define CONFIG_MMC
  82 #define CONFIG_GENERIC_MMC
  83 #define CONFIG_OMAP_HSMMC
  84 #define CONFIG_DOS_PARTITION
  85
  86 /*
  87  * USB configuration
  88  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  89  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  90  */
  91 #define CONFIG_USB_MUSB_AM35X
  92 #define CONFIG_USB_MUSB_PIO_ONLY
  93
  94 #ifdef CONFIG_USB_MUSB_AM35X
  95
  96 #ifdef CONFIG_USB_MUSB_HOST
  97
  98 #define CONGIG_CMD_STORAGE
  99
 100 #ifdef CONFIG_USB_KEYBOARD
 101 #define CONFIG_SYS_USB_EVENT_POLL
 102 #define CONFIG_PREBOOT "usb start"
 103 #endif /* CONFIG_USB_KEYBOARD */
 104
 105 #endif /* CONFIG_USB_MUSB_HOST */
 106
 107 #ifdef CONFIG_USB_MUSB_GADGET
 108 #define CONFIG_USB_ETHER
 109 #define CONFIG_USB_ETH_RNDIS
 110 #endif /* CONFIG_USB_MUSB_GADGET */
 111
 112 #endif /* CONFIG_USB_MUSB_AM35X */
 113
 114 /* commands to include */
 115 #define CONFIG_CMD_NAND
 116 #define CONFIG_CMD_PART
 117 #define CONFIG_CMD_MTDPARTS
 118
 119 /* I2C */
 120 #define CONFIG_SYS_I2C
 121 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 122 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 123 #define CONFIG_SYS_I2C_OMAP34XX
 124
 125 /* Ethernet */
 126 #define CONFIG_DRIVER_TI_EMAC
 127 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 128 #define CONFIG_MII
 129 #define CONFIG_BOOTP_DEFAULT
 130 #define CONFIG_BOOTP_DNS
 131 #define CONFIG_BOOTP_DNS2
 132 #define CONFIG_BOOTP_SEND_HOSTNAME
 133 #define CONFIG_NET_RETRY_COUNT          10
 134
 135 /* Board NAND Info. */
 136 #ifdef CONFIG_NAND
 137 #define CONFIG_NAND_OMAP_GPMC
 138 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 139 #define CONFIG_BCH
 140 #define CONFIG_CMD_UBIFS                /* Read-only UBI volume operations */
 141 #define CONFIG_RBTREE                   /* required by CONFIG_CMD_UBI */
 142 #define CONFIG_LZO                      /* required by CONFIG_CMD_UBIFS */
 143 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 144                                                         /* to access nand */
 145 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 146                                                         /* to access */
 147                                                         /* nand at CS0 */
 148 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 149                                                         /* NAND devices */
 150 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 151 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 152 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 153 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 154 #define CONFIG_SYS_NAND_OOBSIZE         64
 155 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 156 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 157 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
 158                                          11, 12, 13, 14, 16, 17, 18, 19, 20, \
 159                                          21, 22, 23, 24, 25, 26, 27, 28, 30, \
 160                                          31, 32, 33, 34, 35, 36, 37, 38, 39, \
 161                                          40, 41, 42, 44, 45, 46, 47, 48, 49, \
 162                                          50, 51, 52, 53, 54, 55, 56 }
 163
 164 #define CONFIG_SYS_NAND_ECCSIZE         512
 165 #define CONFIG_SYS_NAND_ECCBYTES        13
 166 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 167 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 168 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 169 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 170 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 171 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 172 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 173 /* NAND block size is 128 KiB.  Synchronize these values with
 174  * corresponding Device Tree entries in Linux:
 175  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
 176  *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
 177  *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
 178  *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
 179  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
 180  *  RootFS              Remaining Flash Space           @ 0xB20000
 181  */
 182 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
 183 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"       \
 184         "512k(MLO),"                                    \
 185         "1920k(u-boot),"                                \
 186         "256k(u-boot-env),"                             \
 187         "8m(kernel),"                                   \
 188         "512k(dtb),"                                    \
 189         "-(rootfs)"
 190 #else
 191 #define MTDIDS_DEFAULT
 192 #define MTDPARTS_DEFAULT
 193 #endif /* CONFIG_NAND */
 194
 195 /* Environment information */
 196
 197 #define CONFIG_BOOTFILE         "uImage"
 198
 199 #define CONFIG_EXTRA_ENV_SETTINGS \
 200         "loadaddr=0x82000000\0" \
 201         "console=ttyO2,115200n8\0" \
 202         "fdtfile=am3517-evm.dtb\0" \
 203         "fdtaddr=0x82C00000\0" \
 204         "vram=16M\0" \
 205         "bootenv=uEnv.txt\0" \
 206         "cmdline=\0" \
 207         "optargs=\0" \
 208         "mtdids=" MTDIDS_DEFAULT "\0" \
 209         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 210         "mmcdev=0\0" \
 211         "mmcpart=1\0" \
 212         "mmcroot=/dev/mmcblk0p2 rw\0" \
 213         "mmcrootfstype=ext4 rootwait fixrtc\0" \
 214         "mmcargs=setenv bootargs console=${console} " \
 215                 "${mtdparts} " \
 216                 "${optargs} " \
 217                 "root=${mmcroot} " \
 218                 "rootfstype=${mmcrootfstype} " \
 219                 "${cmdline}\0" \
 220         "nandargs=setenv bootargs console=${console} " \
 221                 "${mtdparts} " \
 222                 "${optargs} " \
 223                 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
 224                 "rootfstype=ubifs rootwait " \
 225                 "${cmdline}\0" \
 226         "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 227         "importbootenv=echo Importing environment from mmc ...; " \
 228                 "env import -t ${loadaddr} ${filesize}\0" \
 229         "bootscript=echo Running bootscript from mmc ...; " \
 230                 "source ${loadaddr}\0" \
 231         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
 232         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 233         "mmcboot=echo Booting from mmc ...; " \
 234                 "run mmcargs; " \
 235                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 236         "nandboot=echo Booting from nand ...; " \
 237                 "run nandargs; " \
 238                 "nand read ${loadaddr} 2a0000 800000; " \
 239                 "nand read ${fdtaddr} aa0000 80000; " \
 240                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 241
 242 #define CONFIG_BOOTCOMMAND \
 243         "mmc dev ${mmcdev}; if mmc rescan; then " \
 244                 "echo SD/MMC found on device $mmcdev; " \
 245                 "if run loadbootenv; then " \
 246                         "run importbootenv; " \
 247                 "fi; " \
 248                 "echo Checking if uenvcmd is set ...; " \
 249                 "if test -n $uenvcmd; then " \
 250                         "echo Running uenvcmd ...; " \
 251                         "run uenvcmd; " \
 252                 "fi; " \
 253                 "echo Running default loadimage ...; " \
 254                 "setenv bootfile zImage; " \
 255                 "if run loadimage; then " \
 256                         "run loadfdt; " \
 257                         "run mmcboot; " \
 258                 "fi; " \
 259         "else run nandboot; fi"
 260
 261 /* Miscellaneous configurable options */
 262 #define CONFIG_AUTO_COMPLETE
 263 #define CONFIG_CMDLINE_EDITING
 264 #define CONFIG_SYS_LONGHELP
 265 #define CONFIG_PARTITION_UUIDS
 266
 267 /* We set the max number of command args high to avoid HUSH bugs. */
 268 #define CONFIG_SYS_MAXARGS              64
 269
 270 /* Console I/O Buffer Size */
 271 #define CONFIG_SYS_CBSIZE               512
 272 /* Print Buffer Size */
 273 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 274                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 275 /* Boot Argument Buffer Size */
 276 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 277
 278 /* memtest works on */
 279 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 280 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 281                                         0x01F00000) /* 31MB */
 282
 283 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 284                                                                 /* address */
 285
 286 /*
 287  * AM3517 has 12 GP timers, they can be driven by the system clock
 288  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 289  * This rate is divided by a local divisor.
 290  */
 291 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 292 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 293
 294 /* Physical Memory Map */
 295 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 296 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
 297 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
 298 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 299 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 300 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 301 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 302                                          CONFIG_SYS_INIT_RAM_SIZE - \
 303                                          GENERATED_GBL_DATA_SIZE)
 304
 305 /* FLASH and environment organization */
 306
 307 /* **** PISMO SUPPORT *** */
 308 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 309                                                 /* on one chip */
 310 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 311 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 312
 313 #if defined(CONFIG_NAND)
 314 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 315 #endif
 316
 317 /* Monitor at start of flash */
 318 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 319
 320 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 321 #define CONFIG_ENV_SIZE                 CONFIG_SYS_ENV_SECT_SIZE
 322 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 323 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 324 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 325 #define CONFIG_ENV_IS_IN_NAND
 326
 327 /* Defines for SPL */
 328 #define CONFIG_SPL_FRAMEWORK
 329 #define CONFIG_SPL_BOARD_INIT
 330 #define CONFIG_SPL_NAND_SIMPLE
 331 #define CONFIG_SPL_TEXT_BASE            0x40200000
 332 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 333                                          CONFIG_SPL_TEXT_BASE)
 334
 335 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 336 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 337
 338 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 339 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 340
 341 #define CONFIG_SPL_NAND_BASE
 342 #define CONFIG_SPL_NAND_DRIVERS
 343 #define CONFIG_SPL_NAND_ECC
 344 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 345
 346 #endif /* __CONFIG_H */