include/configs/am3517_evm.h

   1 /*
   2  * am3517_evm.h - Default configuration for AM3517 EVM board.
   3  *
   4  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   5  *
   6  * Based on omap3_evm_config.h
   7  *
   8  * Copyright (C) 2010 Texas Instruments Incorporated
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /* High Level Configuration Options */
  17
  18 #define CONFIG_OMAP
  19
  20 #define CONFIG_SYS_NO_FLASH
  21
  22 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  23
  24 /* Common ARM Erratas */
  25 #define CONFIG_ARM_ERRATA_454179
  26 #define CONFIG_ARM_ERRATA_430973
  27 #define CONFIG_ARM_ERRATA_621766
  28
  29 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  30
  31 /*
  32  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  33  * 64 bytes before this address should be set aside for u-boot.img's
  34  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  35  * other needs.
  36  */
  37 #define CONFIG_SYS_TEXT_BASE            0x80100000
  38 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  39 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  40
  41 #include <asm/arch/cpu.h>               /* get chip and board defs */
  42 #include <asm/arch/omap.h>
  43
  44 #define CONFIG_MISC_INIT_R
  45 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  46 #define CONFIG_SETUP_MEMORY_TAGS
  47 #define CONFIG_INITRD_TAG
  48 #define CONFIG_REVISION_TAG
  49
  50 /* Clock Defines */
  51 #define V_OSCK                  26000000        /* Clock output from T2 */
  52 #define V_SCLK                  (V_OSCK >> 1)
  53
  54 /* Size of malloc() pool */
  55 #define CONFIG_SYS_MALLOC_LEN           (16 << 20)
  56
  57 /* Hardware drivers */
  58
  59 /* OMAP GPIO configuration */
  60 #define CONFIG_OMAP_GPIO
  61
  62 /* NS16550 Configuration */
  63 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  64 #define CONFIG_SYS_NS16550_SERIAL
  65 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  66 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  67
  68 /* select serial console configuration */
  69 #define CONFIG_CONS_INDEX               3
  70 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  71 #define CONFIG_SERIAL3                  3       /* UART3 on AM3517 EVM */
  72
  73 /* allow to overwrite serial and ethaddr */
  74 #define CONFIG_ENV_OVERWRITE
  75 #define CONFIG_BAUDRATE                 115200
  76 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  77                                         115200}
  78
  79 /*
  80  * USB configuration
  81  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  82  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  83  */
  84 #define CONFIG_USB_MUSB_AM35X
  85 #define CONFIG_USB_MUSB_PIO_ONLY
  86
  87 #ifdef CONFIG_USB_MUSB_AM35X
  88
  89 #ifdef CONFIG_USB_MUSB_HOST
  90
  91 #define CONGIG_CMD_STORAGE
  92
  93 #ifdef CONFIG_USB_KEYBOARD
  94 #define CONFIG_SYS_USB_EVENT_POLL
  95 #define CONFIG_PREBOOT "usb start"
  96 #endif /* CONFIG_USB_KEYBOARD */
  97
  98 #endif /* CONFIG_USB_MUSB_HOST */
  99
 100 #ifdef CONFIG_USB_MUSB_GADGET
 101 #define CONFIG_USB_ETHER
 102 #define CONFIG_USB_ETH_RNDIS
 103 #endif /* CONFIG_USB_MUSB_GADGET */
 104
 105 #endif /* CONFIG_USB_MUSB_AM35X */
 106
 107 /* commands to include */
 108 #define CONFIG_CMD_NAND
 109 #define CONFIG_CMD_MTDPARTS
 110
 111 /* I2C */
 112 #define CONFIG_SYS_I2C
 113 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 114 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 115 #define CONFIG_SYS_I2C_OMAP34XX
 116
 117 /* Ethernet */
 118 #define CONFIG_DRIVER_TI_EMAC
 119 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 120 #define CONFIG_MII
 121 #define CONFIG_BOOTP_DEFAULT
 122 #define CONFIG_BOOTP_DNS
 123 #define CONFIG_BOOTP_DNS2
 124 #define CONFIG_BOOTP_SEND_HOSTNAME
 125 #define CONFIG_NET_RETRY_COUNT          10
 126
 127 /* Board NAND Info. */
 128 #ifdef CONFIG_NAND
 129 #define CONFIG_NAND_OMAP_GPMC
 130 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 131 #define CONFIG_BCH
 132 #define CONFIG_CMD_UBIFS                /* Read-only UBI volume operations */
 133 #define CONFIG_RBTREE                   /* required by CONFIG_CMD_UBI */
 134 #define CONFIG_LZO                      /* required by CONFIG_CMD_UBIFS */
 135 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 136                                                         /* to access nand */
 137 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 138                                                         /* to access */
 139                                                         /* nand at CS0 */
 140 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 141                                                         /* NAND devices */
 142 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 143 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 144 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 145 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 146 #define CONFIG_SYS_NAND_OOBSIZE         64
 147 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 148 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 149 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
 150                                          11, 12, 13, 14, 16, 17, 18, 19, 20, \
 151                                          21, 22, 23, 24, 25, 26, 27, 28, 30, \
 152                                          31, 32, 33, 34, 35, 36, 37, 38, 39, \
 153                                          40, 41, 42, 44, 45, 46, 47, 48, 49, \
 154                                          50, 51, 52, 53, 54, 55, 56 }
 155
 156 #define CONFIG_SYS_NAND_ECCSIZE         512
 157 #define CONFIG_SYS_NAND_ECCBYTES        13
 158 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 159 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 160 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 161 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 162 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 163 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 164 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 165 /* NAND block size is 128 KiB.  Synchronize these values with
 166  * corresponding Device Tree entries in Linux:
 167  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
 168  *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
 169  *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
 170  *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
 171  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
 172  *  RootFS              Remaining Flash Space           @ 0xB20000
 173  */
 174 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
 175 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"       \
 176         "512k(MLO),"                                    \
 177         "1920k(u-boot),"                                \
 178         "256k(u-boot-env),"                             \
 179         "8m(kernel),"                                   \
 180         "512k(dtb),"                                    \
 181         "-(rootfs)"
 182 #else
 183 #define MTDIDS_DEFAULT
 184 #define MTDPARTS_DEFAULT
 185 #endif /* CONFIG_NAND */
 186
 187 /* Environment information */
 188
 189 #define CONFIG_BOOTFILE         "uImage"
 190
 191 #define CONFIG_EXTRA_ENV_SETTINGS \
 192         "loadaddr=0x82000000\0" \
 193         "console=ttyO2,115200n8\0" \
 194         "fdtfile=am3517-evm.dtb\0" \
 195         "fdtaddr=0x82C00000\0" \
 196         "vram=16M\0" \
 197         "bootenv=uEnv.txt\0" \
 198         "cmdline=\0" \
 199         "optargs=\0" \
 200         "mtdids=" MTDIDS_DEFAULT "\0" \
 201         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 202         "mmcdev=0\0" \
 203         "mmcpart=1\0" \
 204         "mmcroot=/dev/mmcblk0p2 rw\0" \
 205         "mmcrootfstype=ext4 rootwait fixrtc\0" \
 206         "mmcargs=setenv bootargs console=${console} " \
 207                 "${mtdparts} " \
 208                 "${optargs} " \
 209                 "root=${mmcroot} " \
 210                 "rootfstype=${mmcrootfstype} " \
 211                 "${cmdline}\0" \
 212         "nandargs=setenv bootargs console=${console} " \
 213                 "${mtdparts} " \
 214                 "${optargs} " \
 215                 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
 216                 "rootfstype=ubifs rootwait " \
 217                 "${cmdline}\0" \
 218         "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 219         "importbootenv=echo Importing environment from mmc ...; " \
 220                 "env import -t ${loadaddr} ${filesize}\0" \
 221         "bootscript=echo Running bootscript from mmc ...; " \
 222                 "source ${loadaddr}\0" \
 223         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
 224         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 225         "mmcboot=echo Booting from mmc ...; " \
 226                 "run mmcargs; " \
 227                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 228         "nandboot=echo Booting from nand ...; " \
 229                 "run nandargs; " \
 230                 "nand read ${loadaddr} 2a0000 800000; " \
 231                 "nand read ${fdtaddr} aa0000 80000; " \
 232                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 233
 234 #define CONFIG_BOOTCOMMAND \
 235         "mmc dev ${mmcdev}; if mmc rescan; then " \
 236                 "echo SD/MMC found on device $mmcdev; " \
 237                 "if run loadbootenv; then " \
 238                         "run importbootenv; " \
 239                 "fi; " \
 240                 "echo Checking if uenvcmd is set ...; " \
 241                 "if test -n $uenvcmd; then " \
 242                         "echo Running uenvcmd ...; " \
 243                         "run uenvcmd; " \
 244                 "fi; " \
 245                 "echo Running default loadimage ...; " \
 246                 "setenv bootfile zImage; " \
 247                 "if run loadimage; then " \
 248                         "run loadfdt; " \
 249                         "run mmcboot; " \
 250                 "fi; " \
 251         "else run nandboot; fi"
 252
 253 /* Miscellaneous configurable options */
 254 #define CONFIG_AUTO_COMPLETE
 255 #define CONFIG_CMDLINE_EDITING
 256 #define CONFIG_SYS_LONGHELP
 257
 258 /* We set the max number of command args high to avoid HUSH bugs. */
 259 #define CONFIG_SYS_MAXARGS              64
 260
 261 /* Console I/O Buffer Size */
 262 #define CONFIG_SYS_CBSIZE               512
 263 /* Print Buffer Size */
 264 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 265                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 266 /* Boot Argument Buffer Size */
 267 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 268
 269 /* memtest works on */
 270 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 271 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 272                                         0x01F00000) /* 31MB */
 273
 274 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 275                                                                 /* address */
 276
 277 /*
 278  * AM3517 has 12 GP timers, they can be driven by the system clock
 279  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 280  * This rate is divided by a local divisor.
 281  */
 282 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 283 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 284
 285 /* Physical Memory Map */
 286 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 287 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
 288 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
 289 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 290 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 291 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 292 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 293                                          CONFIG_SYS_INIT_RAM_SIZE - \
 294                                          GENERATED_GBL_DATA_SIZE)
 295
 296 /* FLASH and environment organization */
 297
 298 /* **** PISMO SUPPORT *** */
 299 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 300                                                 /* on one chip */
 301 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 302 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 303
 304 #if defined(CONFIG_NAND)
 305 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 306 #endif
 307
 308 /* Monitor at start of flash */
 309 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 310
 311 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 312 #define CONFIG_ENV_SIZE                 CONFIG_SYS_ENV_SECT_SIZE
 313 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 314 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 315 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 316 #define CONFIG_ENV_IS_IN_NAND
 317
 318 /* Defines for SPL */
 319 #define CONFIG_SPL_FRAMEWORK
 320 #define CONFIG_SPL_BOARD_INIT
 321 #define CONFIG_SPL_NAND_SIMPLE
 322 #define CONFIG_SPL_TEXT_BASE            0x40200000
 323 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 324                                          CONFIG_SPL_TEXT_BASE)
 325
 326 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 327 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 328
 329 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 330 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 331
 332 #define CONFIG_SPL_NAND_BASE
 333 #define CONFIG_SPL_NAND_DRIVERS
 334 #define CONFIG_SPL_NAND_ECC
 335 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 336
 337 #endif /* __CONFIG_H */