include/configs/am3517_evm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * am3517_evm.h - Default configuration for AM3517 EVM board.
   4  *
   5  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   6  *
   7  * Based on omap3_evm_config.h
   8  *
   9  * Copyright (C) 2010 Texas Instruments Incorporated
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  17  * 64 bytes before this address should be set aside for u-boot.img's
  18  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  19  * other needs.
  20  */
  21
  22 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  23 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  24
  25 #include <configs/ti_omap3_common.h>
  26
  27 #undef CONFIG_DM_I2C_COMPAT
  28 #define CONFIG_REVISION_TAG
  29
  30 /* Hardware drivers */
  31
  32 /* allow to overwrite serial and ethaddr */
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 /*
  36  * USB configuration
  37  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  38  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  39  */
  40
  41 #ifdef CONFIG_USB_MUSB_AM35X
  42
  43 #ifdef CONFIG_USB_MUSB_HOST
  44
  45 #ifdef CONFIG_USB_KEYBOARD
  46 #define CONFIG_PREBOOT "usb start"
  47 #endif /* CONFIG_USB_KEYBOARD */
  48
  49 #endif /* CONFIG_USB_MUSB_HOST */
  50
  51 #endif /* CONFIG_USB_MUSB_AM35X */
  52
  53 /* I2C */
  54
  55 /* Ethernet */
  56 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
  57 #define CONFIG_BOOTP_DEFAULT
  58 #define CONFIG_BOOTP_DNS2
  59 #define CONFIG_BOOTP_SEND_HOSTNAME
  60 #define CONFIG_NET_RETRY_COUNT          10
  61
  62 /* Board NAND Info. */
  63 #ifdef CONFIG_NAND
  64 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  65 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  66 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  67 #define CONFIG_SYS_NAND_OOBSIZE         64
  68 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
  69 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  70 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
  71                                          11, 12, 13, 14, 16, 17, 18, 19, 20, \
  72                                          21, 22, 23, 24, 25, 26, 27, 28, 30, \
  73                                          31, 32, 33, 34, 35, 36, 37, 38, 39, \
  74                                          40, 41, 42, 44, 45, 46, 47, 48, 49, \
  75                                          50, 51, 52, 53, 54, 55, 56 }
  76
  77 #define CONFIG_SYS_NAND_ECCSIZE         512
  78 #define CONFIG_SYS_NAND_ECCBYTES        13
  79 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
  80 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  81 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  82 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  83 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
  84 /* NAND block size is 128 KiB.  Synchronize these values with
  85  * corresponding Device Tree entries in Linux:
  86  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
  87  *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
  88  *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
  89  *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
  90  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
  91  *  RootFS              Remaining Flash Space           @ 0xB20000
  92  */
  93 #endif /* CONFIG_NAND */
  94
  95 /* Environment information */
  96
  97 #define CONFIG_BOOTFILE         "uImage"
  98
  99 #define CONFIG_EXTRA_ENV_SETTINGS \
 100         "loadaddr=0x82000000\0" \
 101         "console=ttyO2,115200n8\0" \
 102         "fdtfile=am3517-evm.dtb\0" \
 103         "fdtaddr=0x82C00000\0" \
 104         "vram=16M\0" \
 105         "bootenv=uEnv.txt\0" \
 106         "cmdline=\0" \
 107         "optargs=\0" \
 108         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 109         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 110         "mmcdev=0\0" \
 111         "mmcpart=1\0" \
 112         "mmcroot=/dev/mmcblk0p2 rw\0" \
 113         "mmcrootfstype=ext4 rootwait fixrtc\0" \
 114         "mmcargs=setenv bootargs console=${console} " \
 115                 "${mtdparts} " \
 116                 "${optargs} " \
 117                 "root=${mmcroot} " \
 118                 "rootfstype=${mmcrootfstype} " \
 119                 "${cmdline}\0" \
 120         "nandargs=setenv bootargs console=${console} " \
 121                 "${mtdparts} " \
 122                 "${optargs} " \
 123                 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
 124                 "rootfstype=ubifs rootwait " \
 125                 "${cmdline}\0" \
 126         "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 127         "importbootenv=echo Importing environment from mmc ...; " \
 128                 "env import -t ${loadaddr} ${filesize}\0" \
 129         "bootscript=echo Running bootscript from mmc ...; " \
 130                 "source ${loadaddr}\0" \
 131         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
 132         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 133         "mmcboot=echo Booting from mmc ...; " \
 134                 "run mmcargs; " \
 135                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 136         "nandboot=echo Booting from nand ...; " \
 137                 "run nandargs; " \
 138                 "nand read ${loadaddr} 2a0000 800000; " \
 139                 "nand read ${fdtaddr} aa0000 80000; " \
 140                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 141
 142 #define CONFIG_BOOTCOMMAND \
 143         "mmc dev ${mmcdev}; if mmc rescan; then " \
 144                 "echo SD/MMC found on device $mmcdev; " \
 145                 "if run loadbootenv; then " \
 146                         "run importbootenv; " \
 147                 "fi; " \
 148                 "echo Checking if uenvcmd is set ...; " \
 149                 "if test -n $uenvcmd; then " \
 150                         "echo Running uenvcmd ...; " \
 151                         "run uenvcmd; " \
 152                 "fi; " \
 153                 "echo Running default loadimage ...; " \
 154                 "setenv bootfile zImage; " \
 155                 "if run loadimage; then " \
 156                         "run loadfdt; " \
 157                         "run mmcboot; " \
 158                 "fi; " \
 159         "else run nandboot; fi"
 160
 161 /* Miscellaneous configurable options */
 162
 163 /* We set the max number of command args high to avoid HUSH bugs. */
 164 #define CONFIG_SYS_MAXARGS              64
 165
 166 /* Print Buffer Size */
 167 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 168                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 169 /* Boot Argument Buffer Size */
 170 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 171
 172 /* memtest works on */
 173 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 174 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 175                                         0x01F00000) /* 31MB */
 176
 177 /* Physical Memory Map */
 178 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
 179 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 180 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 181
 182 /* FLASH and environment organization */
 183
 184 /* **** PISMO SUPPORT *** */
 185 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 186                                                 /* on one chip */
 187 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 188 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 189
 190 #if defined(CONFIG_NAND)
 191 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 192 #endif
 193
 194 /* Monitor at start of flash */
 195 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 196
 197 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 198 #define CONFIG_ENV_SIZE                 CONFIG_SYS_ENV_SECT_SIZE
 199 #define CONFIG_ENV_OFFSET               0x260000
 200 #define CONFIG_ENV_ADDR                 0x260000
 201
 202 /* Defines for SPL */
 203 #undef CONFIG_SPL_TEXT_BASE
 204 #define CONFIG_SPL_TEXT_BASE            0x40200000
 205
 206 #undef CONFIG_SPL_BSS_START_ADDR
 207 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 208 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 209
 210 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 211 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 212
 213 #define CONFIG_SPL_NAND_BASE
 214 #define CONFIG_SPL_NAND_DRIVERS
 215 #define CONFIG_SPL_NAND_ECC
 216
 217 #endif /* __CONFIG_H */