Merge branch 'master' of git://git.denx.de/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / am3517_crane.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
4  *
5  * Author: Srinath.R <srinath@mistralsolutions.com>
6  *
7  * Based on include/configs/am3517evm.h
8  *
9  * Copyright (C) 2011 Mistral Solutions pvt Ltd
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*
16  * High Level Configuration Options
17  */
18
19 #include <asm/arch/cpu.h>               /* get chip and board defs */
20 #include <asm/arch/omap.h>
21
22 /* Clock Defines */
23 #define V_OSCK                  26000000        /* Clock output from T2 */
24 #define V_SCLK                  (V_OSCK >> 1)
25
26 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
27 #define CONFIG_SETUP_MEMORY_TAGS        1
28 #define CONFIG_INITRD_TAG               1
29 #define CONFIG_REVISION_TAG             1
30
31 /*
32  * Size of malloc() pool
33  */
34 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
36                                                 /* initial data */
37 /*
38  * DDR related
39  */
40 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
41
42 /*
43  * Hardware drivers
44  */
45
46 /*
47  * NS16550 Configuration
48  */
49 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
50
51 #define CONFIG_SYS_NS16550_SERIAL
52 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
53 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
54
55 /*
56  * select serial console configuration
57  */
58 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
59
60 /* allow to overwrite serial and ethaddr */
61 #define CONFIG_ENV_OVERWRITE
62 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
63                                         115200}
64
65 /*
66  * USB configuration
67  * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
68  * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
69  */
70
71 #ifdef CONFIG_USB_AM35X
72
73 #ifdef CONFIG_USB_MUSB_HCD
74
75 #ifdef CONFIG_USB_KEYBOARD
76 #define CONFIG_PREBOOT "usb start"
77 #endif /* CONFIG_USB_KEYBOARD */
78
79 #endif /* CONFIG_USB_MUSB_HCD */
80
81 #ifdef CONFIG_USB_MUSB_UDC
82 /* USB device configuration */
83 #define CONFIG_USB_DEVICE               1
84 #define CONFIG_USB_TTY                  1
85 /* Change these to suit your needs */
86 #define CONFIG_USBD_VENDORID            0x0451
87 #define CONFIG_USBD_PRODUCTID           0x5678
88 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
89 #define CONFIG_USBD_PRODUCT_NAME        "AM3517CRANE"
90 #endif /* CONFIG_USB_MUSB_UDC */
91
92 #endif /* CONFIG_USB_AM35X */
93
94 #define CONFIG_SYS_I2C
95
96 /*
97  * Board NAND Info.
98  */
99 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
100                                                         /* to access */
101                                                         /* nand at CS0 */
102
103 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
104                                                         /* NAND devices */
105
106 #define CONFIG_JFFS2_NAND
107 /* nand device jffs2 lives on */
108 #define CONFIG_JFFS2_DEV                "nand0"
109 /* start of jffs2 partition */
110 #define CONFIG_JFFS2_PART_OFFSET        0x680000
111 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
112
113 /* Environment information */
114
115 #define CONFIG_BOOTFILE         "uImage"
116
117 #define CONFIG_EXTRA_ENV_SETTINGS \
118         "loadaddr=0x82000000\0" \
119         "console=ttyS2,115200n8\0" \
120         "mmcdev=0\0" \
121         "mmcargs=setenv bootargs console=${console} " \
122                 "root=/dev/mmcblk0p2 rw " \
123                 "rootfstype=ext3 rootwait\0" \
124         "nandargs=setenv bootargs console=${console} " \
125                 "root=/dev/mtdblock4 rw " \
126                 "rootfstype=jffs2\0" \
127         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
128         "bootscript=echo Running bootscript from mmc ...; " \
129                 "source ${loadaddr}\0" \
130         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
131         "mmcboot=echo Booting from mmc ...; " \
132                 "run mmcargs; " \
133                 "bootm ${loadaddr}\0" \
134         "nandboot=echo Booting from nand ...; " \
135                 "run nandargs; " \
136                 "nand read ${loadaddr} 280000 400000; " \
137                 "bootm ${loadaddr}\0" \
138
139 #define CONFIG_BOOTCOMMAND \
140         "mmc dev ${mmcdev}; if mmc rescan; then " \
141                 "if run loadbootscript; then " \
142                         "run bootscript; " \
143                 "else " \
144                         "if run loaduimage; then " \
145                                 "run mmcboot; " \
146                         "else run nandboot; " \
147                         "fi; " \
148                 "fi; " \
149         "else run nandboot; fi"
150
151 /*
152  * Miscellaneous configurable options
153  */
154 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
155 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
156                                                 /* args */
157 /* memtest works on */
158 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
159 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
160                                         0x01F00000) /* 31MB */
161
162 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
163                                                                 /* address */
164
165 /*
166  * AM3517 has 12 GP timers, they can be driven by the system clock
167  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
168  * This rate is divided by a local divisor.
169  */
170 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
171 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
172
173 /*-----------------------------------------------------------------------
174  * Physical Memory Map
175  */
176 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
177 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
178
179 /*-----------------------------------------------------------------------
180  * FLASH and environment organization
181  */
182
183 /* **** PISMO SUPPORT *** */
184 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
185                                                 /* on one chip */
186 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
187 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
188
189 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
190
191 /* Monitor at start of flash */
192 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
193
194 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB sector */
195 #define CONFIG_ENV_OFFSET               0x260000
196 #define CONFIG_ENV_ADDR                 0x260000
197
198 /*-----------------------------------------------------------------------
199  * CFI FLASH driver setup
200  */
201 /* timeout values are in ticks */
202 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
203 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
204
205 /* Flash banks JFFS2 should use */
206 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
207                                         CONFIG_SYS_MAX_NAND_DEVICE)
208 #define CONFIG_SYS_JFFS2_MEM_NAND
209 /* use flash_info[2] */
210 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
211 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
212
213 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
214 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
215 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
216 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
217                                          CONFIG_SYS_INIT_RAM_SIZE - \
218                                          GENERATED_GBL_DATA_SIZE)
219
220 /* Defines for SPL */
221 #define CONFIG_SPL_TEXT_BASE            0x40200800
222 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
223                                          CONFIG_SPL_TEXT_BASE)
224
225 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
226 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
227
228 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
229 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
230
231 #define CONFIG_SPL_NAND_BASE
232 #define CONFIG_SPL_NAND_DRIVERS
233 #define CONFIG_SPL_NAND_ECC
234
235 /* NAND boot config */
236 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
237 #define CONFIG_SYS_NAND_PAGE_COUNT      64
238 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
239 #define CONFIG_SYS_NAND_OOBSIZE         64
240 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
241 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
242 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
243                                                 10, 11, 12, 13}
244 #define CONFIG_SYS_NAND_ECCSIZE         512
245 #define CONFIG_SYS_NAND_ECCBYTES        3
246 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
247 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
248 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
249
250 /*
251  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
252  * 64 bytes before this address should be set aside for u-boot.img's
253  * header. That is 0x800FFFC0--0x80100000 should not be used for any
254  * other needs.
255  */
256 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
257 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
258
259 #endif /* __CONFIG_H */