include/configs/am3517_crane.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
   4  *
   5  * Author: Srinath.R <srinath@mistralsolutions.com>
   6  *
   7  * Based on include/configs/am3517evm.h
   8  *
   9  * Copyright (C) 2011 Mistral Solutions pvt Ltd
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  */
  18
  19 #include <asm/arch/cpu.h>               /* get chip and board defs */
  20 #include <asm/arch/omap.h>
  21
  22 /* Clock Defines */
  23 #define V_OSCK                  26000000        /* Clock output from T2 */
  24 #define V_SCLK                  (V_OSCK >> 1)
  25
  26 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS        1
  28 #define CONFIG_INITRD_TAG               1
  29 #define CONFIG_REVISION_TAG             1
  30
  31 /*
  32  * Size of malloc() pool
  33  */
  34 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  36                                                 /* initial data */
  37 /*
  38  * DDR related
  39  */
  40 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  41
  42 /*
  43  * Hardware drivers
  44  */
  45
  46 /*
  47  * NS16550 Configuration
  48  */
  49 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  50
  51 #define CONFIG_SYS_NS16550_SERIAL
  52 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  53 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  54
  55 /*
  56  * select serial console configuration
  57  */
  58 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  59
  60 /* allow to overwrite serial and ethaddr */
  61 #define CONFIG_ENV_OVERWRITE
  62 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  63                                         115200}
  64
  65 /*
  66  * USB configuration
  67  * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
  68  * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  69  */
  70
  71 #ifdef CONFIG_USB_AM35X
  72
  73 #ifdef CONFIG_USB_MUSB_HCD
  74
  75 #ifdef CONFIG_USB_KEYBOARD
  76 #define CONFIG_PREBOOT "usb start"
  77 #endif /* CONFIG_USB_KEYBOARD */
  78
  79 #endif /* CONFIG_USB_MUSB_HCD */
  80
  81 #ifdef CONFIG_USB_MUSB_UDC
  82 /* USB device configuration */
  83 #define CONFIG_USB_DEVICE               1
  84 #define CONFIG_USB_TTY                  1
  85 /* Change these to suit your needs */
  86 #define CONFIG_USBD_VENDORID            0x0451
  87 #define CONFIG_USBD_PRODUCTID           0x5678
  88 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  89 #define CONFIG_USBD_PRODUCT_NAME        "AM3517CRANE"
  90 #endif /* CONFIG_USB_MUSB_UDC */
  91
  92 #endif /* CONFIG_USB_AM35X */
  93
  94 #define CONFIG_SYS_I2C
  95
  96 /*
  97  * Board NAND Info.
  98  */
  99 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 100                                                         /* to access */
 101                                                         /* nand at CS0 */
 102
 103 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 104                                                         /* NAND devices */
 105
 106 #define CONFIG_JFFS2_NAND
 107 /* nand device jffs2 lives on */
 108 #define CONFIG_JFFS2_DEV                "nand0"
 109 /* start of jffs2 partition */
 110 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 111 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
 112
 113 /* Environment information */
 114
 115 #define CONFIG_BOOTFILE         "uImage"
 116
 117 #define CONFIG_EXTRA_ENV_SETTINGS \
 118         "loadaddr=0x82000000\0" \
 119         "console=ttyS2,115200n8\0" \
 120         "mmcdev=0\0" \
 121         "mmcargs=setenv bootargs console=${console} " \
 122                 "root=/dev/mmcblk0p2 rw " \
 123                 "rootfstype=ext3 rootwait\0" \
 124         "nandargs=setenv bootargs console=${console} " \
 125                 "root=/dev/mtdblock4 rw " \
 126                 "rootfstype=jffs2\0" \
 127         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 128         "bootscript=echo Running bootscript from mmc ...; " \
 129                 "source ${loadaddr}\0" \
 130         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 131         "mmcboot=echo Booting from mmc ...; " \
 132                 "run mmcargs; " \
 133                 "bootm ${loadaddr}\0" \
 134         "nandboot=echo Booting from nand ...; " \
 135                 "run nandargs; " \
 136                 "nand read ${loadaddr} 280000 400000; " \
 137                 "bootm ${loadaddr}\0" \
 138
 139 #define CONFIG_BOOTCOMMAND \
 140         "mmc dev ${mmcdev}; if mmc rescan; then " \
 141                 "if run loadbootscript; then " \
 142                         "run bootscript; " \
 143                 "else " \
 144                         "if run loaduimage; then " \
 145                                 "run mmcboot; " \
 146                         "else run nandboot; " \
 147                         "fi; " \
 148                 "fi; " \
 149         "else run nandboot; fi"
 150
 151 /*
 152  * Miscellaneous configurable options
 153  */
 154 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 155 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
 156                                                 /* args */
 157 /* memtest works on */
 158 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 159 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 160                                         0x01F00000) /* 31MB */
 161
 162 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 163                                                                 /* address */
 164
 165 /*
 166  * AM3517 has 12 GP timers, they can be driven by the system clock
 167  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 168  * This rate is divided by a local divisor.
 169  */
 170 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 171 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 172
 173 /*-----------------------------------------------------------------------
 174  * Physical Memory Map
 175  */
 176 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 177 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 178
 179 /*-----------------------------------------------------------------------
 180  * FLASH and environment organization
 181  */
 182
 183 /* **** PISMO SUPPORT *** */
 184 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 185                                                 /* on one chip */
 186 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 187 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 188
 189 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 190
 191 /* Monitor at start of flash */
 192 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 193
 194 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB sector */
 195 #define CONFIG_ENV_OFFSET               0x260000
 196 #define CONFIG_ENV_ADDR                 0x260000
 197
 198 /*-----------------------------------------------------------------------
 199  * CFI FLASH driver setup
 200  */
 201 /* timeout values are in ticks */
 202 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
 203 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
 204
 205 /* Flash banks JFFS2 should use */
 206 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 207                                         CONFIG_SYS_MAX_NAND_DEVICE)
 208 #define CONFIG_SYS_JFFS2_MEM_NAND
 209 /* use flash_info[2] */
 210 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 211 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 212
 213 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 214 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 215 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 216 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 217                                          CONFIG_SYS_INIT_RAM_SIZE - \
 218                                          GENERATED_GBL_DATA_SIZE)
 219
 220 /* Defines for SPL */
 221 #define CONFIG_SPL_TEXT_BASE            0x40200800
 222 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 223                                          CONFIG_SPL_TEXT_BASE)
 224
 225 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 226 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 227
 228 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 229 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 230
 231 #define CONFIG_SPL_NAND_BASE
 232 #define CONFIG_SPL_NAND_DRIVERS
 233 #define CONFIG_SPL_NAND_ECC
 234
 235 /* NAND boot config */
 236 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 237 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 238 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 239 #define CONFIG_SYS_NAND_OOBSIZE         64
 240 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 241 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 242 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 243                                                 10, 11, 12, 13}
 244 #define CONFIG_SYS_NAND_ECCSIZE         512
 245 #define CONFIG_SYS_NAND_ECCBYTES        3
 246 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 247 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 248 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 249
 250 /*
 251  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 252  * 64 bytes before this address should be set aside for u-boot.img's
 253  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 254  * other needs.
 255  */
 256 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 257 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 258
 259 #endif /* __CONFIG_H */