include/configs/am335x_shc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2016
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  */
  11
  12 #ifndef __CONFIG_AM335X_SHC_H
  13 #define __CONFIG_AM335X_SHC_H
  14
  15 #include <configs/ti_am335x_common.h>
  16
  17 /* settings we don;t want on this board */
  18
  19 #define CONFIG_SYS_BOOTM_LEN            (16 << 20)
  20
  21 /* Clock Defines */
  22 #define V_OSCK                          24000000  /* Clock output from T2 */
  23 #define V_SCLK                          (V_OSCK)
  24
  25 #define CONFIG_HSMMC2_8BIT
  26
  27 #ifndef CONFIG_SHC_ICT
  28 /*
  29  * In builds other than ICT, reset to retry after timeout
  30  * Define a timeout after which a stopped bootloader continues autoboot
  31  * (only works with CONFIG_RESET_TO_RETRY)
  32  */
  33 # define CONFIG_BOOT_RETRY_TIME 30
  34 # define CONFIG_RESET_TO_RETRY
  35 #endif
  36
  37 #ifndef CONFIG_SPL_BUILD
  38 #define CONFIG_EXTRA_ENV_SETTINGS \
  39         "loadaddr=0x80200000\0" \
  40         "kloadaddr=0x84000000\0" \
  41         "fdtaddr=0x85000000\0" \
  42         "fdt_high=0xffffffff\0" \
  43         "rdaddr=0x81000000\0" \
  44         "bootfile=uImage\0" \
  45         "fdtfile=am335x-shc.dtb\0" \
  46         "verify=no\0" \
  47         "serverip=10.55.152.184\0" \
  48         "rootpath=/srv/nfs/shc-rootfs\0" \
  49         "console=ttyO0,115200n8\0" \
  50         "optargs=quiet\0" \
  51         "mmcdev=1\0" \
  52         "harakiri=0\0" \
  53         "mmcpart=2\0" \
  54         "active_root=root1\0" \
  55         "inactive_root=root2\0" \
  56         "mmcrootfstype=ext4 rootwait\0" \
  57         "nfsopts=nolock\0" \
  58         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
  59                 "::off\0" \
  60         "ip_method=none\0" \
  61         "bootargs_defaults=setenv bootargs " \
  62                 "console=${console} " \
  63                 "${optargs}\0" \
  64         "mmcargs=run bootargs_defaults;" \
  65                 "setenv bootargs ${bootargs} " \
  66                 "root=${mmcroot} " \
  67                 "rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
  68         "netargs=setenv bootargs console=${console} " \
  69                 "${optargs} " \
  70                 "root=/dev/nfs " \
  71                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
  72                 "ip=dhcp\0" \
  73         "bootenv=uEnv.txt\0" \
  74         "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
  75                         "echo Loaded environment from ${bootenv}; " \
  76                         "run importbootenv; " \
  77                 "fi;\0" \
  78         "importbootenv=echo Importing environment variables from uEnv.txt ...; " \
  79                 "env import -t $loadaddr $filesize\0" \
  80         "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
  81         "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
  82         "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
  83         "netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
  84         "netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
  85         "mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
  86                 "run mmcargs; " \
  87                 "if run loadfdt; then " \
  88                         "echo device tree detected; " \
  89                         "bootm ${kloadaddr} - ${fdtaddr}; " \
  90                 "else " \
  91                         "bootm ${kloadaddr}; " \
  92                 "fi; \0" \
  93         "netboot=echo Booting from network ...; " \
  94                 "setenv autoload no; " \
  95                 "dhcp; " \
  96                 "run netloaduimage; " \
  97                 "run netargs; " \
  98                 "echo NFS path: ${serverip}:${rootpath};" \
  99                 "if run netloadfdt; then " \
 100                         "echo device tree detected; " \
 101                         "bootm ${loadaddr} - ${fdtaddr}; " \
 102                 "else " \
 103                         "bootm ${loadaddr}; " \
 104                 "fi; \0" \
 105         "emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
 106         "mmcpart_gp=mmcpart gp 1 40; \0" \
 107         "mmcpart_enhance=mmcpart enhance 0 64; \0" \
 108         "mmcpart_rel_write=mmcpart rel_write 1f; \0" \
 109         "mmcpart_commit=mmcpart commit 1; \0" \
 110         "mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
 111         "led_success=gpio set 22; \0" \
 112         "fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
 113         "uenv_exec=if test -n $uenvcmd; then " \
 114                         "echo Running uenvcmd ...; " \
 115                         "run uenvcmd; " \
 116                 "fi;\0" \
 117         "sd_setup=echo SD/MMC-Card detected on device 0; " \
 118                 "setenv mmcdevice SD; " \
 119                 "setenv mmcdev 0; " \
 120                 "setenv mmcpart 2; " \
 121                 "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
 122         "emmc_setup=echo eMMC detected on device 1; " \
 123                 "setenv mmcdevice eMMC; " \
 124                 "setenv mmcdev 1; " \
 125                 "run emmc_erase; " \
 126                 "if test ${active_root} = root2; then " \
 127                         "echo Active root is partition 6 (root2); " \
 128                         "setenv mmcpart 6; " \
 129                 "else " \
 130                         "echo Active root is partition 5 (root1); " \
 131                         "setenv mmcpart 5; " \
 132                 "fi; " \
 133                 "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
 134 #endif /* #ifndef CONFIG_SPL_BUILD */
 135
 136 #if defined CONFIG_SHC_NETBOOT
 137 /* Network Boot */
 138
 139 #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
 140 /* SD-Card Boot */
 141
 142 #elif defined CONFIG_SHC_ICT
 143 /* ICT adapter boots only u-boot and does HW partitioning */
 144
 145 #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
 146 /* Regular Boot from internal eMMC */
 147
 148 #endif /* Regular Boot */
 149
 150 /* NS16550 Configuration */
 151 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* UART0 */
 152 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 153 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 154 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 155 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 156 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 157
 158 /* PMIC support */
 159 #define CONFIG_POWER_TPS65217
 160
 161 /* SPL */
 162
 163 /*
 164  * Disable MMC DM for SPL build and can be re-enabled after adding
 165  * DM support in SPL
 166  */
 167 #ifdef CONFIG_SPL_BUILD
 168 #undef CONFIG_DM_MMC
 169 #undef CONFIG_TIMER
 170 #endif
 171
 172 #define CONFIG_NET_RETRY_COUNT         10
 173 #endif  /* ! __CONFIG_AM335X_SHC_H */