include/configs/advantech_dms-ba16.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Timesys Corporation
   4  * Copyright (C) 2016 Advantech Corporation
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  */
   7
   8 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
   9 #define __ADVANTECH_DMSBA16_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/mach-imx/gpio.h>
  13
  14 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
  15
  16 #define CONFIG_MXC_UART_BASE    UART4_BASE
  17 #define CONSOLE_DEV     "ttymxc3"
  18 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
  19
  20 #define CONFIG_BOOT_DIR ""
  21 #define CONFIG_LOADCMD "fatload"
  22 #define CONFIG_RFSPART "2"
  23
  24 #include "mx6_common.h"
  25 #include <linux/sizes.h>
  26
  27 #define CONFIG_CMDLINE_TAG
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30 #define CONFIG_REVISION_TAG
  31 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  32
  33 /* SATA Configs */
  34 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  35 #define CONFIG_DWC_AHSATA_PORT_ID       0
  36 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  37 #define CONFIG_LBA48
  38
  39 /* MMC Configs */
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  41
  42 /* USB Configs */
  43 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  44 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  45 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  46 #define CONFIG_MXC_USB_FLAGS    0
  47
  48 #define CONFIG_USBD_HS
  49
  50 /* Networking Configs */
  51 #define CONFIG_FEC_MXC
  52 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  53 #define CONFIG_FEC_XCV_TYPE             RGMII
  54 #define CONFIG_ETHPRIME         "FEC"
  55 #define CONFIG_FEC_MXC_PHYADDR          4
  56
  57 /* Serial Flash */
  58
  59 /* allow to overwrite serial and ethaddr */
  60 #define CONFIG_ENV_OVERWRITE
  61
  62 #define CONFIG_LOADADDR 0x12000000
  63
  64 #define CONFIG_EXTRA_ENV_SETTINGS \
  65         "script=boot.scr\0" \
  66         "image=" CONFIG_BOOT_DIR "/uImage\0" \
  67         "uboot=u-boot.imx\0" \
  68         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
  69         "fdt_addr=0x18000000\0" \
  70         "boot_fdt=yes\0" \
  71         "ip_dyn=yes\0" \
  72         "console=" CONSOLE_DEV "\0" \
  73         "fdt_high=0xffffffff\0"   \
  74         "initrd_high=0xffffffff\0" \
  75         "sddev=0\0" \
  76         "emmcdev=1\0" \
  77         "partnum=1\0" \
  78         "loadcmd=" CONFIG_LOADCMD "\0" \
  79         "rfspart=" CONFIG_RFSPART "\0" \
  80         "update_sd_firmware=" \
  81                 "if test ${ip_dyn} = yes; then " \
  82                         "setenv get_cmd dhcp; " \
  83                 "else " \
  84                         "setenv get_cmd tftp; " \
  85                 "fi; " \
  86                 "if mmc dev ${mmcdev}; then "   \
  87                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  88                                 "setexpr fw_sz ${filesize} / 0x200; " \
  89                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  90                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  91                         "fi; "  \
  92                 "fi\0" \
  93         "update_sf_uboot=" \
  94                 "if tftp $loadaddr $uboot; then " \
  95                         "sf probe; " \
  96                         "sf erase 0 0xC0000; " \
  97                         "sf write $loadaddr 0x400 $filesize; " \
  98                         "echo 'U-Boot upgraded. Please reset'; " \
  99                 "fi\0" \
 100         "setargs=setenv bootargs console=${console},${baudrate} " \
 101                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
 102         "loadbootscript=" \
 103                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 104         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 105                 " source\0" \
 106         "loadimage=" \
 107                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 108         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 109         "tryboot=" \
 110                 "if run loadbootscript; then " \
 111                         "run bootscript; " \
 112                 "else " \
 113                         "if run loadimage; then " \
 114                                 "run doboot; " \
 115                         "fi; " \
 116                 "fi;\0" \
 117         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 118                 "run setargs; " \
 119                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 120                         "if run loadfdt; then " \
 121                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 122                         "else " \
 123                                 "if test ${boot_fdt} = try; then " \
 124                                         "bootm; " \
 125                                 "else " \
 126                                         "echo WARN: Cannot load the DT; " \
 127                                 "fi; " \
 128                         "fi; " \
 129                 "else " \
 130                         "bootm; " \
 131                 "fi;\0" \
 132         "netargs=setenv bootargs console=${console},${baudrate} " \
 133                 "root=/dev/nfs " \
 134                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 135         "netboot=echo Booting from net ...; " \
 136                 "run netargs; " \
 137                 "if test ${ip_dyn} = yes; then " \
 138                         "setenv get_cmd dhcp; " \
 139                 "else " \
 140                         "setenv get_cmd tftp; " \
 141                 "fi; " \
 142                 "${get_cmd} ${image}; " \
 143                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 144                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 145                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 146                         "else " \
 147                                 "if test ${boot_fdt} = try; then " \
 148                                         "bootm; " \
 149                                 "else " \
 150                                         "echo WARN: Cannot load the DT; " \
 151                                 "fi; " \
 152                         "fi; " \
 153                 "else " \
 154                         "bootm; " \
 155                 "fi;\0" \
 156
 157 #define CONFIG_BOOTCOMMAND \
 158         "usb start; " \
 159         "setenv dev usb; " \
 160         "setenv devnum 0; " \
 161         "setenv rootdev sda${rfspart}; " \
 162         "run tryboot; " \
 163         \
 164         "setenv dev mmc; " \
 165         "setenv rootdev mmcblk0p${rfspart}; " \
 166         \
 167         "setenv devnum ${sddev}; " \
 168         "if mmc dev ${devnum}; then " \
 169                 "run tryboot; " \
 170         "fi; " \
 171         \
 172         "setenv devnum ${emmcdev}; " \
 173         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
 174         "if mmc dev ${devnum}; then " \
 175                 "run tryboot; " \
 176         "fi; " \
 177         \
 178         "bmode usb; " \
 179
 180 #define CONFIG_ARP_TIMEOUT     200UL
 181
 182 /* Miscellaneous configurable options */
 183
 184 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 185
 186 /* Physical Memory Map */
 187 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 188
 189 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 190 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 191 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 192
 193 #define CONFIG_SYS_INIT_SP_OFFSET \
 194         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 195 #define CONFIG_SYS_INIT_SP_ADDR \
 196         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 197
 198 /* FLASH and environment organization */
 199
 200 #define CONFIG_SYS_FSL_USDHC_NUM        3
 201
 202 /* Framebuffer */
 203 #define CONFIG_VIDEO_BMP_RLE8
 204 #define CONFIG_SPLASH_SCREEN
 205 #define CONFIG_SPLASH_SCREEN_ALIGN
 206 #define CONFIG_BMP_16BPP
 207 #define CONFIG_VIDEO_LOGO
 208 #define CONFIG_VIDEO_BMP_LOGO
 209 #define CONFIG_IMX_HDMI
 210 #define CONFIG_IMX_VIDEO_SKIP
 211
 212 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 213
 214 #ifdef CONFIG_CMD_PCI
 215 #define CONFIG_PCI_SCAN_SHOW
 216 #define CONFIG_PCIE_IMX
 217 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 218 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 219 #endif
 220
 221 /* I2C Configs */
 222 #define CONFIG_SYS_I2C
 223 #define CONFIG_SYS_I2C_MXC
 224 #define CONFIG_SYS_I2C_SPEED            100000
 225 #define CONFIG_SYS_I2C_MXC_I2C1
 226 #define CONFIG_SYS_I2C_MXC_I2C2
 227 #define CONFIG_SYS_I2C_MXC_I2C3
 228
 229 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */