pci: Move CONFIG_PCI_PNP to Kconfig
[platform/kernel/u-boot.git] / include / configs / advantech_dms-ba16.h
1 /*
2  * Copyright (C) 2016 Timesys Corporation
3  * Copyright (C) 2016 Advantech Corporation
4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
10 #define __ADVANTECH_DMSBA16_CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13 #include <asm/imx-common/gpio.h>
14
15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
16 #define CONFIG_DEFAULT_FDT_FILE "imx6q-dms-ba16.dtb"
17
18 #define CONFIG_MXC_UART_BASE    UART4_BASE
19 #define CONSOLE_DEV     "ttymxc3"
20 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
21
22 #define CONFIG_BOOT_DIR ""
23 #define CONFIG_LOADCMD "fatload"
24 #define CONFIG_RFSPART "2"
25
26 #define CONFIG_SUPPORT_EMMC_BOOT
27
28 #include "mx6_common.h"
29 #include <linux/sizes.h>
30
31 #define CONFIG_CMDLINE_TAG
32 #define CONFIG_SETUP_MEMORY_TAGS
33 #define CONFIG_INITRD_TAG
34 #define CONFIG_REVISION_TAG
35 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
36
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_BOARD_LATE_INIT
39
40 #define CONFIG_MXC_GPIO
41 #define CONFIG_MXC_UART
42
43 #define CONFIG_CMD_FUSE
44 #define CONFIG_MXC_OCOTP
45
46 /* SATA Configs */
47 #define CONFIG_CMD_SATA
48 #define CONFIG_DWC_AHSATA
49 #define CONFIG_SYS_SATA_MAX_DEVICE      1
50 #define CONFIG_DWC_AHSATA_PORT_ID       0
51 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
52 #define CONFIG_LBA48
53 #define CONFIG_LIBATA
54
55 /* MMC Configs */
56 #define CONFIG_FSL_ESDHC
57 #define CONFIG_FSL_USDHC
58 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
59 #define CONFIG_MMC
60 #define CONFIG_GENERIC_MMC
61 #define CONFIG_BOUNCE_BUFFER
62 #define CONFIG_DOS_PARTITION
63
64 /* USB Configs */
65 #define CONFIG_USB_EHCI
66 #define CONFIG_USB_EHCI_MX6
67 #define CONFIG_USB_STORAGE
68 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
70 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
71 #define CONFIG_MXC_USB_FLAGS    0
72 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
73
74 #define CONFIG_USBD_HS
75 #define CONFIG_USB_FUNCTION_MASS_STORAGE
76 #define CONFIG_USB_GADGET_VBUS_DRAW 2
77
78 /* Networking Configs */
79 #define CONFIG_FEC_MXC
80 #define CONFIG_MII
81 #define IMX_FEC_BASE                    ENET_BASE_ADDR
82 #define CONFIG_FEC_XCV_TYPE             RGMII
83 #define CONFIG_ETHPRIME         "FEC"
84 #define CONFIG_FEC_MXC_PHYADDR          4
85 #define CONFIG_PHYLIB
86 #define CONFIG_PHY_ATHEROS
87
88 /* Serial Flash */
89 #ifdef CONFIG_CMD_SF
90 #define CONFIG_MXC_SPI
91 #define CONFIG_SF_DEFAULT_BUS           0
92 #define CONFIG_SF_DEFAULT_CS            0
93 #define CONFIG_SF_DEFAULT_SPEED 20000000
94 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
95 #endif
96
97 /* allow to overwrite serial and ethaddr */
98 #define CONFIG_ENV_OVERWRITE
99 #define CONFIG_CONS_INDEX       1
100 #define CONFIG_BAUDRATE 115200
101
102 /* Command definition */
103 #define CONFIG_CMD_BMODE
104
105 #define CONFIG_LOADADDR 0x12000000
106 #define CONFIG_SYS_TEXT_BASE    0x17800000
107
108 #define CONFIG_EXTRA_ENV_SETTINGS \
109         "script=boot.scr\0" \
110         "image=" CONFIG_BOOT_DIR "/uImage\0" \
111         "uboot=u-boot.imx\0" \
112         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
113         "fdt_addr=0x18000000\0" \
114         "boot_fdt=yes\0" \
115         "ip_dyn=yes\0" \
116         "console=" CONSOLE_DEV "\0" \
117         "fdt_high=0xffffffff\0"   \
118         "initrd_high=0xffffffff\0" \
119         "sddev=0\0" \
120         "emmcdev=1\0" \
121         "partnum=1\0" \
122         "loadcmd=" CONFIG_LOADCMD "\0" \
123         "rfspart=" CONFIG_RFSPART "\0" \
124         "update_sd_firmware=" \
125                 "if test ${ip_dyn} = yes; then " \
126                         "setenv get_cmd dhcp; " \
127                 "else " \
128                         "setenv get_cmd tftp; " \
129                 "fi; " \
130                 "if mmc dev ${mmcdev}; then "   \
131                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
132                                 "setexpr fw_sz ${filesize} / 0x200; " \
133                                 "setexpr fw_sz ${fw_sz} + 1; "  \
134                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
135                         "fi; "  \
136                 "fi\0" \
137         "update_sf_uboot=" \
138                 "if tftp $loadaddr $uboot; then " \
139                         "sf probe; " \
140                         "sf erase 0 0xC0000; " \
141                         "sf write $loadaddr 0x400 $filesize; " \
142                         "echo 'U-Boot upgraded. Please reset'; " \
143                 "fi\0" \
144         "setargs=setenv bootargs console=${console},${baudrate} " \
145                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
146         "loadbootscript=" \
147                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
148         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
149                 " source\0" \
150         "loadimage=" \
151                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
152         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
153         "tryboot=" \
154                 "if run loadbootscript; then " \
155                         "run bootscript; " \
156                 "else " \
157                         "if run loadimage; then " \
158                                 "run doboot; " \
159                         "fi; " \
160                 "fi;\0" \
161         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
162                 "run setargs; " \
163                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
164                         "if run loadfdt; then " \
165                                 "bootm ${loadaddr} - ${fdt_addr}; " \
166                         "else " \
167                                 "if test ${boot_fdt} = try; then " \
168                                         "bootm; " \
169                                 "else " \
170                                         "echo WARN: Cannot load the DT; " \
171                                 "fi; " \
172                         "fi; " \
173                 "else " \
174                         "bootm; " \
175                 "fi;\0" \
176         "netargs=setenv bootargs console=${console},${baudrate} " \
177                 "root=/dev/nfs " \
178                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
179         "netboot=echo Booting from net ...; " \
180                 "run netargs; " \
181                 "if test ${ip_dyn} = yes; then " \
182                         "setenv get_cmd dhcp; " \
183                 "else " \
184                         "setenv get_cmd tftp; " \
185                 "fi; " \
186                 "${get_cmd} ${image}; " \
187                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
188                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
189                                 "bootm ${loadaddr} - ${fdt_addr}; " \
190                         "else " \
191                                 "if test ${boot_fdt} = try; then " \
192                                         "bootm; " \
193                                 "else " \
194                                         "echo WARN: Cannot load the DT; " \
195                                 "fi; " \
196                         "fi; " \
197                 "else " \
198                         "bootm; " \
199                 "fi;\0" \
200
201 #define CONFIG_BOOTCOMMAND \
202         "usb start; " \
203         "setenv dev usb; " \
204         "setenv devnum 0; " \
205         "setenv rootdev sda${rfspart}; " \
206         "run tryboot; " \
207         \
208         "setenv dev mmc; " \
209         "setenv rootdev mmcblk0p${rfspart}; " \
210         \
211         "setenv devnum ${sddev}; " \
212         "if mmc dev ${devnum}; then " \
213                 "run tryboot; " \
214         "fi; " \
215         \
216         "setenv devnum ${emmcdev}; " \
217         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
218         "if mmc dev ${devnum}; then " \
219                 "run tryboot; " \
220         "fi; " \
221         \
222         "bmode usb; " \
223
224 #define CONFIG_ARP_TIMEOUT     200UL
225
226 /* Miscellaneous configurable options */
227 #define CONFIG_SYS_LONGHELP
228 #define CONFIG_AUTO_COMPLETE
229
230 /* Print Buffer Size */
231 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
232 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
233
234 #define CONFIG_SYS_MEMTEST_START       0x10000000
235 #define CONFIG_SYS_MEMTEST_END         0x10010000
236 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
237
238 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
239
240 #define CONFIG_CMDLINE_EDITING
241 #define CONFIG_STACKSIZE               (128 * 1024)
242
243 /* Physical Memory Map */
244 #define CONFIG_NR_DRAM_BANKS           1
245 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
246
247 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
248 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
249 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
250
251 #define CONFIG_SYS_INIT_SP_OFFSET \
252         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
253 #define CONFIG_SYS_INIT_SP_ADDR \
254         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
255
256 /* FLASH and environment organization */
257 #define CONFIG_SYS_NO_FLASH
258
259 #define CONFIG_ENV_IS_IN_SPI_FLASH
260 #define CONFIG_ENV_SIZE                 (8 * 1024)
261 #define CONFIG_ENV_OFFSET               (768 * 1024)
262 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
263 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
264 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
265 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
266 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
267
268 #ifndef CONFIG_SYS_DCACHE_OFF
269 #endif
270
271 #define CONFIG_SYS_FSL_USDHC_NUM        3
272
273 /* Framebuffer */
274 #define CONFIG_VIDEO_IPUV3
275 #define CONFIG_VIDEO_BMP_RLE8
276 #define CONFIG_SPLASH_SCREEN
277 #define CONFIG_SPLASH_SCREEN_ALIGN
278 #define CONFIG_BMP_16BPP
279 #define CONFIG_VIDEO_LOGO
280 #define CONFIG_VIDEO_BMP_LOGO
281 #define CONFIG_IPUV3_CLK                260000000
282 #define CONFIG_IMX_HDMI
283 #define CONFIG_IMX_VIDEO_SKIP
284
285 #define CONFIG_PWM_IMX
286 #define CONFIG_IMX6_PWM_PER_CLK         66000000
287
288 #undef CONFIG_CMD_PCI
289 #ifdef CONFIG_CMD_PCI
290 #define CONFIG_PCI_SCAN_SHOW
291 #define CONFIG_PCIE_IMX
292 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
293 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
294 #endif
295
296 /* I2C Configs */
297 #define CONFIG_SYS_I2C
298 #define CONFIG_SYS_I2C_MXC
299 #define CONFIG_SYS_I2C_SPEED            100000
300 #define CONFIG_SYS_I2C_MXC_I2C1
301 #define CONFIG_SYS_I2C_MXC_I2C2
302 #define CONFIG_SYS_I2C_MXC_I2C3
303
304 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */