include/configs/advantech_dms-ba16.h

   1 /*
   2  * Copyright (C) 2016 Timesys Corporation
   3  * Copyright (C) 2016 Advantech Corporation
   4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
  10 #define __ADVANTECH_DMSBA16_CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14
  15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
  16 #define CONFIG_DEFAULT_FDT_FILE "imx6q-dms-ba16.dtb"
  17
  18 #define CONFIG_MXC_UART_BASE    UART4_BASE
  19 #define CONFIG_CONSOLE_DEV      "ttymxc3"
  20 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
  21
  22 #define CONFIG_BOOT_DIR ""
  23 #define CONFIG_LOADCMD "fatload"
  24 #define CONFIG_RFSPART "2"
  25
  26 #define CONFIG_SUPPORT_EMMC_BOOT
  27
  28 #include "mx6_common.h"
  29 #include <linux/sizes.h>
  30
  31 #define CONFIG_DISPLAY_BOARDINFO
  32
  33 #define CONFIG_CMDLINE_TAG
  34 #define CONFIG_SETUP_MEMORY_TAGS
  35 #define CONFIG_INITRD_TAG
  36 #define CONFIG_REVISION_TAG
  37 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40 #define CONFIG_BOARD_LATE_INIT
  41
  42 #define CONFIG_MXC_GPIO
  43 #define CONFIG_MXC_UART
  44
  45 #define CONFIG_CMD_FUSE
  46 #define CONFIG_MXC_OCOTP
  47
  48 /* SATA Configs */
  49 #define CONFIG_CMD_SATA
  50 #define CONFIG_DWC_AHSATA
  51 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  52 #define CONFIG_DWC_AHSATA_PORT_ID       0
  53 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  54 #define CONFIG_LBA48
  55 #define CONFIG_LIBATA
  56
  57 /* MMC Configs */
  58 #define CONFIG_FSL_ESDHC
  59 #define CONFIG_FSL_USDHC
  60 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  61 #define CONFIG_MMC
  62 #define CONFIG_GENERIC_MMC
  63 #define CONFIG_BOUNCE_BUFFER
  64 #define CONFIG_DOS_PARTITION
  65
  66 /* USB Configs */
  67 #define CONFIG_USB_EHCI
  68 #define CONFIG_USB_EHCI_MX6
  69 #define CONFIG_USB_STORAGE
  70 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  71 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  72 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  73 #define CONFIG_MXC_USB_FLAGS    0
  74 #define CONFIG_USB_KEYBOARD
  75 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  76
  77 #define CONFIG_USBD_HS
  78 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  79 #define CONFIG_USB_GADGET_VBUS_DRAW 2
  80
  81 /* Networking Configs */
  82 #define CONFIG_FEC_MXC
  83 #define CONFIG_MII
  84 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  85 #define CONFIG_FEC_XCV_TYPE             RGMII
  86 #define CONFIG_ETHPRIME         "FEC"
  87 #define CONFIG_FEC_MXC_PHYADDR          4
  88 #define CONFIG_PHYLIB
  89 #define CONFIG_PHY_ATHEROS
  90
  91 /* Serial Flash */
  92 #ifdef CONFIG_CMD_SF
  93 #define CONFIG_MXC_SPI
  94 #define CONFIG_SF_DEFAULT_BUS           0
  95 #define CONFIG_SF_DEFAULT_CS            0
  96 #define CONFIG_SF_DEFAULT_SPEED 20000000
  97 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  98 #endif
  99
 100 /* allow to overwrite serial and ethaddr */
 101 #define CONFIG_ENV_OVERWRITE
 102 #define CONFIG_CONS_INDEX       1
 103 #define CONFIG_BAUDRATE 115200
 104
 105 /* Command definition */
 106 #define CONFIG_CMD_BMODE
 107
 108 #define CONFIG_LOADADDR 0x12000000
 109 #define CONFIG_SYS_TEXT_BASE    0x17800000
 110
 111 #define CONFIG_EXTRA_ENV_SETTINGS \
 112         "script=boot.scr\0" \
 113         "image=" CONFIG_BOOT_DIR "/uImage\0" \
 114         "uboot=u-boot.imx\0" \
 115         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
 116         "fdt_addr=0x18000000\0" \
 117         "boot_fdt=yes\0" \
 118         "ip_dyn=yes\0" \
 119         "console=" CONFIG_CONSOLE_DEV "\0" \
 120         "fdt_high=0xffffffff\0"   \
 121         "initrd_high=0xffffffff\0" \
 122         "sddev=0\0" \
 123         "emmcdev=1\0" \
 124         "partnum=1\0" \
 125         "loadcmd=" CONFIG_LOADCMD "\0" \
 126         "rfspart=" CONFIG_RFSPART "\0" \
 127         "update_sd_firmware=" \
 128                 "if test ${ip_dyn} = yes; then " \
 129                         "setenv get_cmd dhcp; " \
 130                 "else " \
 131                         "setenv get_cmd tftp; " \
 132                 "fi; " \
 133                 "if mmc dev ${mmcdev}; then "   \
 134                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 135                                 "setexpr fw_sz ${filesize} / 0x200; " \
 136                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 137                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 138                         "fi; "  \
 139                 "fi\0" \
 140         "update_sf_uboot=" \
 141                 "if tftp $loadaddr $uboot; then " \
 142                         "sf probe; " \
 143                         "sf erase 0 0xC0000; " \
 144                         "sf write $loadaddr 0x400 $filesize; " \
 145                         "echo 'U-Boot upgraded. Please reset'; " \
 146                 "fi\0" \
 147         "setargs=setenv bootargs console=${console},${baudrate} " \
 148                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
 149         "loadbootscript=" \
 150                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 151         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 152                 " source\0" \
 153         "loadimage=" \
 154                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 155         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 156         "tryboot=" \
 157                 "if run loadbootscript; then " \
 158                         "run bootscript; " \
 159                 "else " \
 160                         "if run loadimage; then " \
 161                                 "run doboot; " \
 162                         "fi; " \
 163                 "fi;\0" \
 164         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 165                 "run setargs; " \
 166                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 167                         "if run loadfdt; then " \
 168                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 169                         "else " \
 170                                 "if test ${boot_fdt} = try; then " \
 171                                         "bootm; " \
 172                                 "else " \
 173                                         "echo WARN: Cannot load the DT; " \
 174                                 "fi; " \
 175                         "fi; " \
 176                 "else " \
 177                         "bootm; " \
 178                 "fi;\0" \
 179         "netargs=setenv bootargs console=${console},${baudrate} " \
 180                 "root=/dev/nfs " \
 181                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 182         "netboot=echo Booting from net ...; " \
 183                 "run netargs; " \
 184                 "if test ${ip_dyn} = yes; then " \
 185                         "setenv get_cmd dhcp; " \
 186                 "else " \
 187                         "setenv get_cmd tftp; " \
 188                 "fi; " \
 189                 "${get_cmd} ${image}; " \
 190                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 191                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 192                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 193                         "else " \
 194                                 "if test ${boot_fdt} = try; then " \
 195                                         "bootm; " \
 196                                 "else " \
 197                                         "echo WARN: Cannot load the DT; " \
 198                                 "fi; " \
 199                         "fi; " \
 200                 "else " \
 201                         "bootm; " \
 202                 "fi;\0" \
 203
 204 #define CONFIG_BOOTCOMMAND \
 205         "usb start; " \
 206         "setenv dev usb; " \
 207         "setenv devnum 0; " \
 208         "setenv rootdev sda${rfspart}; " \
 209         "run tryboot; " \
 210         \
 211         "setenv dev mmc; " \
 212         "setenv rootdev mmcblk0p${rfspart}; " \
 213         \
 214         "setenv devnum ${sddev}; " \
 215         "if mmc dev ${devnum}; then " \
 216                 "run tryboot; " \
 217         "fi; " \
 218         \
 219         "setenv devnum ${emmcdev}; " \
 220         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
 221         "if mmc dev ${devnum}; then " \
 222                 "run tryboot; " \
 223         "fi; " \
 224         \
 225         "bmode usb; " \
 226
 227 #define CONFIG_ARP_TIMEOUT     200UL
 228
 229 /* Miscellaneous configurable options */
 230 #define CONFIG_SYS_LONGHELP
 231 #define CONFIG_AUTO_COMPLETE
 232
 233 /* Print Buffer Size */
 234 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 235 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 236
 237 #define CONFIG_SYS_MEMTEST_START       0x10000000
 238 #define CONFIG_SYS_MEMTEST_END         0x10010000
 239 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 240
 241 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 242
 243 #define CONFIG_CMDLINE_EDITING
 244 #define CONFIG_STACKSIZE               (128 * 1024)
 245
 246 /* Physical Memory Map */
 247 #define CONFIG_NR_DRAM_BANKS           1
 248 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 249
 250 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 251 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 252 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 253
 254 #define CONFIG_SYS_INIT_SP_OFFSET \
 255         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 256 #define CONFIG_SYS_INIT_SP_ADDR \
 257         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 258
 259 /* FLASH and environment organization */
 260 #define CONFIG_SYS_NO_FLASH
 261
 262 #define CONFIG_ENV_IS_IN_SPI_FLASH
 263 #define CONFIG_ENV_SIZE                 (8 * 1024)
 264 #define CONFIG_ENV_OFFSET               (768 * 1024)
 265 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 266 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 267 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 268 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 269 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 270
 271 #ifndef CONFIG_SYS_DCACHE_OFF
 272 #endif
 273
 274 #define CONFIG_SYS_FSL_USDHC_NUM        3
 275
 276 /* Framebuffer */
 277 #define CONFIG_VIDEO
 278 #define CONFIG_VIDEO_IPUV3
 279 #define CONFIG_CFB_CONSOLE
 280 #define CONFIG_VGA_AS_SINGLE_DEVICE
 281 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 282 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 283 #define CONFIG_VIDEO_BMP_RLE8
 284 #define CONFIG_SPLASH_SCREEN
 285 #define CONFIG_SPLASH_SCREEN_ALIGN
 286 #define CONFIG_BMP_16BPP
 287 #define CONFIG_VIDEO_LOGO
 288 #define CONFIG_VIDEO_BMP_LOGO
 289 #define CONFIG_IPUV3_CLK                260000000
 290 #define CONFIG_IMX_HDMI
 291 #define CONFIG_IMX_VIDEO_SKIP
 292
 293 #define CONFIG_PWM_IMX
 294 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 295
 296 #undef CONFIG_CMD_PCI
 297 #ifdef CONFIG_CMD_PCI
 298 #define CONFIG_PCI
 299 #define CONFIG_PCI_PNP
 300 #define CONFIG_PCI_SCAN_SHOW
 301 #define CONFIG_PCIE_IMX
 302 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 303 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 304 #endif
 305
 306 /* I2C Configs */
 307 #define CONFIG_SYS_I2C
 308 #define CONFIG_SYS_I2C_MXC
 309 #define CONFIG_SYS_I2C_SPEED            100000
 310 #define CONFIG_SYS_I2C_MXC_I2C1
 311 #define CONFIG_SYS_I2C_MXC_I2C2
 312 #define CONFIG_SYS_I2C_MXC_I2C3
 313
 314 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */