bf87b2bc96804218df91aa1fedcbd2d326b5aec9
[platform/kernel/u-boot.git] / include / configs / advantech_dms-ba16.h
1 /*
2  * Copyright (C) 2016 Timesys Corporation
3  * Copyright (C) 2016 Advantech Corporation
4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
10 #define __ADVANTECH_DMSBA16_CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13 #include <asm/imx-common/gpio.h>
14
15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
16
17 #define CONFIG_MXC_UART_BASE    UART4_BASE
18 #define CONSOLE_DEV     "ttymxc3"
19 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
20
21 #define CONFIG_BOOT_DIR ""
22 #define CONFIG_LOADCMD "fatload"
23 #define CONFIG_RFSPART "2"
24
25 #define CONFIG_SUPPORT_EMMC_BOOT
26
27 #include "mx6_common.h"
28 #include <linux/sizes.h>
29
30 #define CONFIG_CMDLINE_TAG
31 #define CONFIG_SETUP_MEMORY_TAGS
32 #define CONFIG_INITRD_TAG
33 #define CONFIG_REVISION_TAG
34 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
35
36 #define CONFIG_BOARD_EARLY_INIT_F
37
38 #define CONFIG_MXC_GPIO
39 #define CONFIG_MXC_UART
40
41 #define CONFIG_CMD_FUSE
42 #define CONFIG_MXC_OCOTP
43
44 /* SATA Configs */
45 #define CONFIG_CMD_SATA
46 #define CONFIG_DWC_AHSATA
47 #define CONFIG_SYS_SATA_MAX_DEVICE      1
48 #define CONFIG_DWC_AHSATA_PORT_ID       0
49 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
50 #define CONFIG_LBA48
51 #define CONFIG_LIBATA
52
53 /* MMC Configs */
54 #define CONFIG_FSL_ESDHC
55 #define CONFIG_FSL_USDHC
56 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
57 #define CONFIG_GENERIC_MMC
58 #define CONFIG_BOUNCE_BUFFER
59 #define CONFIG_DOS_PARTITION
60
61 /* USB Configs */
62 #define CONFIG_USB_EHCI
63 #define CONFIG_USB_EHCI_MX6
64 #define CONFIG_USB_STORAGE
65 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
66 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
67 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
68 #define CONFIG_MXC_USB_FLAGS    0
69 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
70
71 #define CONFIG_USBD_HS
72 #define CONFIG_USB_FUNCTION_MASS_STORAGE
73 #define CONFIG_USB_GADGET_VBUS_DRAW 2
74
75 /* Networking Configs */
76 #define CONFIG_FEC_MXC
77 #define CONFIG_MII
78 #define IMX_FEC_BASE                    ENET_BASE_ADDR
79 #define CONFIG_FEC_XCV_TYPE             RGMII
80 #define CONFIG_ETHPRIME         "FEC"
81 #define CONFIG_FEC_MXC_PHYADDR          4
82 #define CONFIG_PHYLIB
83 #define CONFIG_PHY_ATHEROS
84
85 /* Serial Flash */
86 #ifdef CONFIG_CMD_SF
87 #define CONFIG_MXC_SPI
88 #define CONFIG_SF_DEFAULT_BUS           0
89 #define CONFIG_SF_DEFAULT_CS            0
90 #define CONFIG_SF_DEFAULT_SPEED 20000000
91 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
92 #endif
93
94 /* allow to overwrite serial and ethaddr */
95 #define CONFIG_ENV_OVERWRITE
96 #define CONFIG_CONS_INDEX       1
97 #define CONFIG_BAUDRATE 115200
98
99 /* Command definition */
100 #define CONFIG_CMD_BMODE
101
102 #define CONFIG_LOADADDR 0x12000000
103 #define CONFIG_SYS_TEXT_BASE    0x17800000
104
105 #define CONFIG_EXTRA_ENV_SETTINGS \
106         "script=boot.scr\0" \
107         "image=" CONFIG_BOOT_DIR "/uImage\0" \
108         "uboot=u-boot.imx\0" \
109         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
110         "fdt_addr=0x18000000\0" \
111         "boot_fdt=yes\0" \
112         "ip_dyn=yes\0" \
113         "console=" CONSOLE_DEV "\0" \
114         "fdt_high=0xffffffff\0"   \
115         "initrd_high=0xffffffff\0" \
116         "sddev=0\0" \
117         "emmcdev=1\0" \
118         "partnum=1\0" \
119         "loadcmd=" CONFIG_LOADCMD "\0" \
120         "rfspart=" CONFIG_RFSPART "\0" \
121         "update_sd_firmware=" \
122                 "if test ${ip_dyn} = yes; then " \
123                         "setenv get_cmd dhcp; " \
124                 "else " \
125                         "setenv get_cmd tftp; " \
126                 "fi; " \
127                 "if mmc dev ${mmcdev}; then "   \
128                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
129                                 "setexpr fw_sz ${filesize} / 0x200; " \
130                                 "setexpr fw_sz ${fw_sz} + 1; "  \
131                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
132                         "fi; "  \
133                 "fi\0" \
134         "update_sf_uboot=" \
135                 "if tftp $loadaddr $uboot; then " \
136                         "sf probe; " \
137                         "sf erase 0 0xC0000; " \
138                         "sf write $loadaddr 0x400 $filesize; " \
139                         "echo 'U-Boot upgraded. Please reset'; " \
140                 "fi\0" \
141         "setargs=setenv bootargs console=${console},${baudrate} " \
142                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
143         "loadbootscript=" \
144                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
145         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
146                 " source\0" \
147         "loadimage=" \
148                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
149         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
150         "tryboot=" \
151                 "if run loadbootscript; then " \
152                         "run bootscript; " \
153                 "else " \
154                         "if run loadimage; then " \
155                                 "run doboot; " \
156                         "fi; " \
157                 "fi;\0" \
158         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
159                 "run setargs; " \
160                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
161                         "if run loadfdt; then " \
162                                 "bootm ${loadaddr} - ${fdt_addr}; " \
163                         "else " \
164                                 "if test ${boot_fdt} = try; then " \
165                                         "bootm; " \
166                                 "else " \
167                                         "echo WARN: Cannot load the DT; " \
168                                 "fi; " \
169                         "fi; " \
170                 "else " \
171                         "bootm; " \
172                 "fi;\0" \
173         "netargs=setenv bootargs console=${console},${baudrate} " \
174                 "root=/dev/nfs " \
175                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
176         "netboot=echo Booting from net ...; " \
177                 "run netargs; " \
178                 "if test ${ip_dyn} = yes; then " \
179                         "setenv get_cmd dhcp; " \
180                 "else " \
181                         "setenv get_cmd tftp; " \
182                 "fi; " \
183                 "${get_cmd} ${image}; " \
184                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
185                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
186                                 "bootm ${loadaddr} - ${fdt_addr}; " \
187                         "else " \
188                                 "if test ${boot_fdt} = try; then " \
189                                         "bootm; " \
190                                 "else " \
191                                         "echo WARN: Cannot load the DT; " \
192                                 "fi; " \
193                         "fi; " \
194                 "else " \
195                         "bootm; " \
196                 "fi;\0" \
197
198 #define CONFIG_BOOTCOMMAND \
199         "usb start; " \
200         "setenv dev usb; " \
201         "setenv devnum 0; " \
202         "setenv rootdev sda${rfspart}; " \
203         "run tryboot; " \
204         \
205         "setenv dev mmc; " \
206         "setenv rootdev mmcblk0p${rfspart}; " \
207         \
208         "setenv devnum ${sddev}; " \
209         "if mmc dev ${devnum}; then " \
210                 "run tryboot; " \
211         "fi; " \
212         \
213         "setenv devnum ${emmcdev}; " \
214         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
215         "if mmc dev ${devnum}; then " \
216                 "run tryboot; " \
217         "fi; " \
218         \
219         "bmode usb; " \
220
221 #define CONFIG_ARP_TIMEOUT     200UL
222
223 /* Miscellaneous configurable options */
224 #define CONFIG_SYS_LONGHELP
225 #define CONFIG_AUTO_COMPLETE
226
227 /* Print Buffer Size */
228 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
229 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
230
231 #define CONFIG_SYS_MEMTEST_START       0x10000000
232 #define CONFIG_SYS_MEMTEST_END         0x10010000
233 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
234
235 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
236
237 #define CONFIG_CMDLINE_EDITING
238 #define CONFIG_STACKSIZE               (128 * 1024)
239
240 /* Physical Memory Map */
241 #define CONFIG_NR_DRAM_BANKS           1
242 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
243
244 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
245 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
246 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
247
248 #define CONFIG_SYS_INIT_SP_OFFSET \
249         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
250 #define CONFIG_SYS_INIT_SP_ADDR \
251         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
252
253 /* FLASH and environment organization */
254 #define CONFIG_SYS_NO_FLASH
255
256 #define CONFIG_ENV_IS_IN_SPI_FLASH
257 #define CONFIG_ENV_SIZE                 (8 * 1024)
258 #define CONFIG_ENV_OFFSET               (768 * 1024)
259 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
260 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
261 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
262 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
263 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
264
265 #ifndef CONFIG_SYS_DCACHE_OFF
266 #endif
267
268 #define CONFIG_SYS_FSL_USDHC_NUM        3
269
270 /* Framebuffer */
271 #define CONFIG_VIDEO_IPUV3
272 #define CONFIG_VIDEO_BMP_RLE8
273 #define CONFIG_SPLASH_SCREEN
274 #define CONFIG_SPLASH_SCREEN_ALIGN
275 #define CONFIG_BMP_16BPP
276 #define CONFIG_VIDEO_LOGO
277 #define CONFIG_VIDEO_BMP_LOGO
278 #define CONFIG_IPUV3_CLK                260000000
279 #define CONFIG_IMX_HDMI
280 #define CONFIG_IMX_VIDEO_SKIP
281
282 #define CONFIG_PWM_IMX
283 #define CONFIG_IMX6_PWM_PER_CLK         66000000
284
285 #undef CONFIG_CMD_PCI
286 #ifdef CONFIG_CMD_PCI
287 #define CONFIG_PCI_SCAN_SHOW
288 #define CONFIG_PCIE_IMX
289 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
290 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
291 #endif
292
293 /* I2C Configs */
294 #define CONFIG_SYS_I2C
295 #define CONFIG_SYS_I2C_MXC
296 #define CONFIG_SYS_I2C_SPEED            100000
297 #define CONFIG_SYS_I2C_MXC_I2C1
298 #define CONFIG_SYS_I2C_MXC_I2C2
299 #define CONFIG_SYS_I2C_MXC_I2C3
300
301 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */