1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2016 Timesys Corporation
4 * Copyright (C) 2016 Advantech Corporation
5 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
9 #define __ADVANTECH_DMSBA16_CONFIG_H
11 #include <asm/arch/imx-regs.h>
12 #include <asm/mach-imx/gpio.h>
14 #define CONFIG_BOARD_NAME "Advantech DMS-BA16"
16 #define CONFIG_MXC_UART_BASE UART4_BASE
17 #define CONSOLE_DEV "ttymxc3"
18 #define CONFIG_EXTRA_BOOTARGS "panic=10"
20 #define CONFIG_BOOT_DIR ""
21 #define CONFIG_LOADCMD "fatload"
22 #define CONFIG_RFSPART "2"
24 #include "mx6_common.h"
25 #include <linux/sizes.h>
27 #define CONFIG_CMDLINE_TAG
28 #define CONFIG_SETUP_MEMORY_TAGS
29 #define CONFIG_INITRD_TAG
30 #define CONFIG_REVISION_TAG
31 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
33 #define CONFIG_MXC_UART
36 #define CONFIG_SYS_SATA_MAX_DEVICE 1
37 #define CONFIG_DWC_AHSATA_PORT_ID 0
38 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
42 #define CONFIG_FSL_USDHC
43 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
46 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
48 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
49 #define CONFIG_MXC_USB_FLAGS 0
51 #define CONFIG_USBD_HS
53 /* Networking Configs */
54 #define CONFIG_FEC_MXC
55 #define IMX_FEC_BASE ENET_BASE_ADDR
56 #define CONFIG_FEC_XCV_TYPE RGMII
57 #define CONFIG_ETHPRIME "FEC"
58 #define CONFIG_FEC_MXC_PHYADDR 4
59 #define CONFIG_PHY_ATHEROS
63 /* allow to overwrite serial and ethaddr */
64 #define CONFIG_ENV_OVERWRITE
66 #define CONFIG_LOADADDR 0x12000000
68 #define CONFIG_EXTRA_ENV_SETTINGS \
70 "image=" CONFIG_BOOT_DIR "/uImage\0" \
71 "uboot=u-boot.imx\0" \
72 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
73 "fdt_addr=0x18000000\0" \
76 "console=" CONSOLE_DEV "\0" \
77 "fdt_high=0xffffffff\0" \
78 "initrd_high=0xffffffff\0" \
82 "loadcmd=" CONFIG_LOADCMD "\0" \
83 "rfspart=" CONFIG_RFSPART "\0" \
84 "update_sd_firmware=" \
85 "if test ${ip_dyn} = yes; then " \
86 "setenv get_cmd dhcp; " \
88 "setenv get_cmd tftp; " \
90 "if mmc dev ${mmcdev}; then " \
91 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
92 "setexpr fw_sz ${filesize} / 0x200; " \
93 "setexpr fw_sz ${fw_sz} + 1; " \
94 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
98 "if tftp $loadaddr $uboot; then " \
100 "sf erase 0 0xC0000; " \
101 "sf write $loadaddr 0x400 $filesize; " \
102 "echo 'U-Boot upgraded. Please reset'; " \
104 "setargs=setenv bootargs console=${console},${baudrate} " \
105 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
107 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
108 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
111 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
112 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
114 "if run loadbootscript; then " \
117 "if run loadimage; then " \
121 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
123 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
124 "if run loadfdt; then " \
125 "bootm ${loadaddr} - ${fdt_addr}; " \
127 "if test ${boot_fdt} = try; then " \
130 "echo WARN: Cannot load the DT; " \
136 "netargs=setenv bootargs console=${console},${baudrate} " \
138 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
139 "netboot=echo Booting from net ...; " \
141 "if test ${ip_dyn} = yes; then " \
142 "setenv get_cmd dhcp; " \
144 "setenv get_cmd tftp; " \
146 "${get_cmd} ${image}; " \
147 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
148 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
149 "bootm ${loadaddr} - ${fdt_addr}; " \
151 "if test ${boot_fdt} = try; then " \
154 "echo WARN: Cannot load the DT; " \
161 #define CONFIG_BOOTCOMMAND \
164 "setenv devnum 0; " \
165 "setenv rootdev sda${rfspart}; " \
169 "setenv rootdev mmcblk0p${rfspart}; " \
171 "setenv devnum ${sddev}; " \
172 "if mmc dev ${devnum}; then " \
176 "setenv devnum ${emmcdev}; " \
177 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
178 "if mmc dev ${devnum}; then " \
184 #define CONFIG_ARP_TIMEOUT 200UL
186 /* Miscellaneous configurable options */
188 #define CONFIG_SYS_MEMTEST_START 0x10000000
189 #define CONFIG_SYS_MEMTEST_END 0x10010000
190 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
192 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
194 /* Physical Memory Map */
195 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
197 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
198 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
199 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
201 #define CONFIG_SYS_INIT_SP_OFFSET \
202 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
203 #define CONFIG_SYS_INIT_SP_ADDR \
204 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
206 /* FLASH and environment organization */
208 #define CONFIG_ENV_SIZE (8 * 1024)
209 #define CONFIG_ENV_OFFSET (768 * 1024)
210 #define CONFIG_ENV_SECT_SIZE (64 * 1024)
212 #define CONFIG_SYS_FSL_USDHC_NUM 3
216 #define CONFIG_VIDEO_BMP_RLE8
217 #define CONFIG_SPLASH_SCREEN
218 #define CONFIG_SPLASH_SCREEN_ALIGN
219 #define CONFIG_BMP_16BPP
220 #define CONFIG_VIDEO_LOGO
221 #define CONFIG_VIDEO_BMP_LOGO
222 #define CONFIG_IMX_HDMI
223 #define CONFIG_IMX_VIDEO_SKIP
226 #define CONFIG_PWM_IMX
227 #define CONFIG_IMX6_PWM_PER_CLK 66000000
229 #ifdef CONFIG_CMD_PCI
230 #define CONFIG_PCI_SCAN_SHOW
231 #define CONFIG_PCIE_IMX
232 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
233 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
237 #define CONFIG_SYS_I2C
238 #define CONFIG_SYS_I2C_MXC
239 #define CONFIG_SYS_I2C_SPEED 100000
240 #define CONFIG_SYS_I2C_MXC_I2C1
241 #define CONFIG_SYS_I2C_MXC_I2C2
242 #define CONFIG_SYS_I2C_MXC_I2C3
244 #endif /* __ADVANTECH_DMSBA16_CONFIG_H */