include/configs/advantech_dms-ba16.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Timesys Corporation
   4  * Copyright (C) 2016 Advantech Corporation
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  */
   7
   8 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
   9 #define __ADVANTECH_DMSBA16_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/mach-imx/gpio.h>
  13
  14 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
  15
  16 #define CONFIG_MXC_UART_BASE    UART4_BASE
  17 #define CONSOLE_DEV     "ttymxc3"
  18 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
  19
  20 #define CONFIG_BOOT_DIR ""
  21 #define CONFIG_LOADCMD "fatload"
  22 #define CONFIG_RFSPART "2"
  23
  24 #define CONFIG_SUPPORT_EMMC_BOOT
  25
  26 #include "mx6_common.h"
  27 #include <linux/sizes.h>
  28
  29 #define CONFIG_CMDLINE_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32 #define CONFIG_REVISION_TAG
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 #define CONFIG_MXC_UART
  36
  37 #define CONFIG_MXC_OCOTP
  38
  39 /* SATA Configs */
  40 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  41 #define CONFIG_DWC_AHSATA_PORT_ID       0
  42 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  43 #define CONFIG_LBA48
  44
  45 /* MMC Configs */
  46 #define CONFIG_FSL_USDHC
  47 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  48
  49 /* USB Configs */
  50 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  52 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  53 #define CONFIG_MXC_USB_FLAGS    0
  54
  55 #define CONFIG_USBD_HS
  56
  57 /* Networking Configs */
  58 #define CONFIG_FEC_MXC
  59 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  60 #define CONFIG_FEC_XCV_TYPE             RGMII
  61 #define CONFIG_ETHPRIME         "FEC"
  62 #define CONFIG_FEC_MXC_PHYADDR          4
  63 #define CONFIG_PHY_ATHEROS
  64
  65 /* Serial Flash */
  66 #ifdef CONFIG_CMD_SF
  67 #define CONFIG_SF_DEFAULT_BUS           0
  68 #define CONFIG_SF_DEFAULT_CS            0
  69 #define CONFIG_SF_DEFAULT_SPEED 20000000
  70 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  71 #endif
  72
  73 /* allow to overwrite serial and ethaddr */
  74 #define CONFIG_ENV_OVERWRITE
  75
  76 #define CONFIG_LOADADDR 0x12000000
  77
  78 #define CONFIG_EXTRA_ENV_SETTINGS \
  79         "script=boot.scr\0" \
  80         "image=" CONFIG_BOOT_DIR "/uImage\0" \
  81         "uboot=u-boot.imx\0" \
  82         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
  83         "fdt_addr=0x18000000\0" \
  84         "boot_fdt=yes\0" \
  85         "ip_dyn=yes\0" \
  86         "console=" CONSOLE_DEV "\0" \
  87         "fdt_high=0xffffffff\0"   \
  88         "initrd_high=0xffffffff\0" \
  89         "sddev=0\0" \
  90         "emmcdev=1\0" \
  91         "partnum=1\0" \
  92         "loadcmd=" CONFIG_LOADCMD "\0" \
  93         "rfspart=" CONFIG_RFSPART "\0" \
  94         "update_sd_firmware=" \
  95                 "if test ${ip_dyn} = yes; then " \
  96                         "setenv get_cmd dhcp; " \
  97                 "else " \
  98                         "setenv get_cmd tftp; " \
  99                 "fi; " \
 100                 "if mmc dev ${mmcdev}; then "   \
 101                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 102                                 "setexpr fw_sz ${filesize} / 0x200; " \
 103                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 104                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 105                         "fi; "  \
 106                 "fi\0" \
 107         "update_sf_uboot=" \
 108                 "if tftp $loadaddr $uboot; then " \
 109                         "sf probe; " \
 110                         "sf erase 0 0xC0000; " \
 111                         "sf write $loadaddr 0x400 $filesize; " \
 112                         "echo 'U-Boot upgraded. Please reset'; " \
 113                 "fi\0" \
 114         "setargs=setenv bootargs console=${console},${baudrate} " \
 115                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
 116         "loadbootscript=" \
 117                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 118         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 119                 " source\0" \
 120         "loadimage=" \
 121                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 122         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 123         "tryboot=" \
 124                 "if run loadbootscript; then " \
 125                         "run bootscript; " \
 126                 "else " \
 127                         "if run loadimage; then " \
 128                                 "run doboot; " \
 129                         "fi; " \
 130                 "fi;\0" \
 131         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 132                 "run setargs; " \
 133                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 134                         "if run loadfdt; then " \
 135                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 136                         "else " \
 137                                 "if test ${boot_fdt} = try; then " \
 138                                         "bootm; " \
 139                                 "else " \
 140                                         "echo WARN: Cannot load the DT; " \
 141                                 "fi; " \
 142                         "fi; " \
 143                 "else " \
 144                         "bootm; " \
 145                 "fi;\0" \
 146         "netargs=setenv bootargs console=${console},${baudrate} " \
 147                 "root=/dev/nfs " \
 148                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 149         "netboot=echo Booting from net ...; " \
 150                 "run netargs; " \
 151                 "if test ${ip_dyn} = yes; then " \
 152                         "setenv get_cmd dhcp; " \
 153                 "else " \
 154                         "setenv get_cmd tftp; " \
 155                 "fi; " \
 156                 "${get_cmd} ${image}; " \
 157                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 158                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 159                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 160                         "else " \
 161                                 "if test ${boot_fdt} = try; then " \
 162                                         "bootm; " \
 163                                 "else " \
 164                                         "echo WARN: Cannot load the DT; " \
 165                                 "fi; " \
 166                         "fi; " \
 167                 "else " \
 168                         "bootm; " \
 169                 "fi;\0" \
 170
 171 #define CONFIG_BOOTCOMMAND \
 172         "usb start; " \
 173         "setenv dev usb; " \
 174         "setenv devnum 0; " \
 175         "setenv rootdev sda${rfspart}; " \
 176         "run tryboot; " \
 177         \
 178         "setenv dev mmc; " \
 179         "setenv rootdev mmcblk0p${rfspart}; " \
 180         \
 181         "setenv devnum ${sddev}; " \
 182         "if mmc dev ${devnum}; then " \
 183                 "run tryboot; " \
 184         "fi; " \
 185         \
 186         "setenv devnum ${emmcdev}; " \
 187         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
 188         "if mmc dev ${devnum}; then " \
 189                 "run tryboot; " \
 190         "fi; " \
 191         \
 192         "bmode usb; " \
 193
 194 #define CONFIG_ARP_TIMEOUT     200UL
 195
 196 /* Miscellaneous configurable options */
 197
 198 #define CONFIG_SYS_MEMTEST_START       0x10000000
 199 #define CONFIG_SYS_MEMTEST_END         0x10010000
 200 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 201
 202 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 203
 204 /* Physical Memory Map */
 205 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 206
 207 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 208 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 209 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 210
 211 #define CONFIG_SYS_INIT_SP_OFFSET \
 212         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 213 #define CONFIG_SYS_INIT_SP_ADDR \
 214         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 215
 216 /* FLASH and environment organization */
 217
 218 #define CONFIG_ENV_SIZE                 (8 * 1024)
 219 #define CONFIG_ENV_OFFSET               (768 * 1024)
 220 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 221 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 222 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 223 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 224 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 225
 226 #define CONFIG_SYS_FSL_USDHC_NUM        3
 227
 228 /* Framebuffer */
 229 #ifdef CONFIG_VIDEO
 230 #define CONFIG_VIDEO_IPUV3
 231 #define CONFIG_VIDEO_BMP_RLE8
 232 #define CONFIG_SPLASH_SCREEN
 233 #define CONFIG_SPLASH_SCREEN_ALIGN
 234 #define CONFIG_BMP_16BPP
 235 #define CONFIG_VIDEO_LOGO
 236 #define CONFIG_VIDEO_BMP_LOGO
 237 #define CONFIG_IMX_HDMI
 238 #define CONFIG_IMX_VIDEO_SKIP
 239 #endif
 240
 241 #define CONFIG_PWM_IMX
 242 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 243
 244 #ifdef CONFIG_CMD_PCI
 245 #define CONFIG_PCI_SCAN_SHOW
 246 #define CONFIG_PCIE_IMX
 247 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 248 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 249 #endif
 250
 251 /* I2C Configs */
 252 #define CONFIG_SYS_I2C
 253 #define CONFIG_SYS_I2C_MXC
 254 #define CONFIG_SYS_I2C_SPEED            100000
 255 #define CONFIG_SYS_I2C_MXC_I2C1
 256 #define CONFIG_SYS_I2C_MXC_I2C2
 257 #define CONFIG_SYS_I2C_MXC_I2C3
 258
 259 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */