include/configs/adp-ae3xx.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Andes Technology Corporation
   4  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   5  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch-ae3xx/ae3xx.h>
  12
  13 /*
  14  * CPU and Board Configuration Options
  15  */
  16 #define CONFIG_USE_INTERRUPT
  17
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19
  20 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
  21
  22 #define CONFIG_ARCH_MAP_SYSMEM
  23
  24 #define CONFIG_BOOTP_SEND_HOSTNAME
  25 #define CONFIG_BOOTP_SERVERIP
  26
  27 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  28 #ifdef CONFIG_OF_CONTROL
  29 #undef CONFIG_OF_SEPARATE
  30 #define CONFIG_OF_EMBED
  31 #endif
  32 #endif
  33
  34 /*
  35  * Timer
  36  */
  37 #define CONFIG_SYS_CLK_FREQ     39062500
  38 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  39
  40 /*
  41  * Use Externel CLOCK or PCLK
  42  */
  43 #undef CONFIG_FTRTC010_EXTCLK
  44
  45 #ifndef CONFIG_FTRTC010_EXTCLK
  46 #define CONFIG_FTRTC010_PCLK
  47 #endif
  48
  49 #ifdef CONFIG_FTRTC010_EXTCLK
  50 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  51 #else
  52 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  53 #endif
  54
  55 #define TIMER_LOAD_VAL  0xffffffff
  56
  57 /*
  58  * Real Time Clock
  59  */
  60 #define CONFIG_RTC_FTRTC010
  61
  62 /*
  63  * Real Time Clock Divider
  64  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  65  */
  66 #define OSC_5MHZ                        (5*1000000)
  67 #define OSC_CLK                         (4*OSC_5MHZ)
  68 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  69
  70 /*
  71  * Serial console configuration
  72  */
  73
  74 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  75 #define CONFIG_SYS_NS16550_SERIAL
  76 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  77 #ifndef CONFIG_DM_SERIAL
  78 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  79 #endif
  80 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  81
  82 /*
  83  * Miscellaneous configurable options
  84  */
  85
  86 /*
  87  * Size of malloc() pool
  88  */
  89 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
  90 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
  91
  92 /*
  93  * Physical Memory Map
  94  */
  95 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
  96
  97 #define PHYS_SDRAM_1 \
  98         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
  99
 100 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 101
 102 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
 103 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
 104
 105 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 106
 107 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 108                                         GENERATED_GBL_DATA_SIZE)
 109
 110 /*
 111  * Load address and memory test area should agree with
 112  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
 113  */
 114 #define CONFIG_SYS_LOAD_ADDR            0x300000
 115
 116 /* memtest works on 63 MB in DRAM */
 117 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 118 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 119
 120 /*
 121  * Static memory controller configuration
 122  */
 123 #define CONFIG_FTSMC020
 124
 125 #ifdef CONFIG_FTSMC020
 126 #include <faraday/ftsmc020.h>
 127
 128 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 129         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 130         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 131 }
 132
 133 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 134 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 135                                          FTSMC020_BANK_SIZE_32M |       \
 136                                          FTSMC020_BANK_MBW_32)
 137
 138 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 139                                          FTSMC020_TPR_AST(1)    |       \
 140                                          FTSMC020_TPR_CTW(1)    |       \
 141                                          FTSMC020_TPR_ATI(1)    |       \
 142                                          FTSMC020_TPR_AT2(1)    |       \
 143                                          FTSMC020_TPR_WTC(1)    |       \
 144                                          FTSMC020_TPR_AHT(1)    |       \
 145                                          FTSMC020_TPR_TRNA(1))
 146 #endif
 147
 148 /*
 149  * FLASH on ADP_AG101P is connected to BANK0
 150  * Just disalbe the other BANK to avoid detection error.
 151  */
 152 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 153                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 154                                  FTSMC020_BANK_SIZE_32M           |     \
 155                                  FTSMC020_BANK_MBW_32)
 156
 157 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 158                                  FTSMC020_TPR_CTW(3)   |        \
 159                                  FTSMC020_TPR_ATI(0xf) |        \
 160                                  FTSMC020_TPR_AT2(3)   |        \
 161                                  FTSMC020_TPR_WTC(3)   |        \
 162                                  FTSMC020_TPR_AHT(3)   |        \
 163                                  FTSMC020_TPR_TRNA(0xf))
 164
 165 #define FTSMC020_BANK1_CONFIG   (0x00)
 166 #define FTSMC020_BANK1_TIMING   (0x00)
 167 #endif /* CONFIG_FTSMC020 */
 168
 169 /*
 170  * FLASH and environment organization
 171  */
 172 /* use CFI framework */
 173 #define CONFIG_SYS_FLASH_CFI
 174 #define CONFIG_FLASH_CFI_DRIVER
 175
 176 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 177 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 178 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 179
 180 /* support JEDEC */
 181 #ifdef CONFIG_CFI_FLASH
 182 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
 183 #endif
 184
 185 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 186 #define PHYS_FLASH_1                    0x88000000      /* BANK 0 */
 187 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 188 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 189 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 190
 191 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 192 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 193
 194 /* max number of memory banks */
 195 /*
 196  * There are 4 banks supported for this Controller,
 197  * but we have only 1 bank connected to flash on board
 198  */
 199 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 200 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 201 #endif
 202 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 203
 204 /* max number of sectors on one chip */
 205 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
 206 #define CONFIG_SYS_MAX_FLASH_SECT       512
 207
 208 /* environments */
 209 #define CONFIG_ENV_SPI_BUS              0
 210 #define CONFIG_ENV_SPI_CS               0
 211 #define CONFIG_ENV_SPI_MAX_HZ           50000000
 212 #define CONFIG_ENV_SPI_MODE             0
 213 #define CONFIG_ENV_SECT_SIZE            0x1000
 214 #define CONFIG_ENV_OFFSET               0x140000
 215 #define CONFIG_ENV_SIZE                 8192
 216 #define CONFIG_ENV_OVERWRITE
 217
 218
 219 /* SPI FLASH */
 220 #define CONFIG_SF_DEFAULT_BUS           0
 221 #define CONFIG_SF_DEFAULT_CS            0
 222 #define CONFIG_SF_DEFAULT_SPEED         1000000
 223 #define CONFIG_SF_DEFAULT_MODE          0
 224
 225 /*
 226  * For booting Linux, the board info and command line data
 227  * have to be in the first 16 MB of memory, since this is
 228  * the maximum mapped by the Linux kernel during initialization.
 229  */
 230
 231 /* Initial Memory map for Linux*/
 232 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 233 /* Increase max gunzip size */
 234 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 235
 236 #endif  /* __CONFIG_H */