powerpc/T104xD4RDB: Add T104xD4RDB boards support
[platform/kernel/u-boot.git] / include / configs / acadia.h
1 /*
2  * (C) Copyright 2007
3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /************************************************************************
9  * acadia.h - configuration for AMCC Acadia (405EZ)
10  ***********************************************************************/
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*-----------------------------------------------------------------------
16  * High Level Configuration Options
17  *----------------------------------------------------------------------*/
18 #define CONFIG_ACADIA           1               /* Board is Acadia      */
19 #define CONFIG_405EZ            1               /* Specifc 405EZ support*/
20
21 #ifndef CONFIG_SYS_TEXT_BASE
22 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
23 #endif
24
25 /*
26  * Include common defines/options for all AMCC eval boards
27  */
28 #define CONFIG_HOSTNAME         acadia
29 #include "amcc-common.h"
30
31 /* Detect Acadia PLL input clock automatically via CPLD bit             */
32 #define CONFIG_SYS_CLK_FREQ    ((in8(CONFIG_SYS_CPLD_BASE + 0) == 0x0c) ? \
33                                 66666666 : 33333000)
34
35 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
36 #define CONFIG_MISC_INIT_F      1               /* Call misc_init_f     */
37
38 #define CONFIG_NO_SERIAL_EEPROM
39 /*#undef CONFIG_NO_SERIAL_EEPROM*/
40
41 #ifdef CONFIG_NO_SERIAL_EEPROM
42 /*----------------------------------------------------------------------------
43  * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
44  * assuming a 66MHz input clock to the 405EZ.
45  *---------------------------------------------------------------------------*/
46 /* #define PLLMR0_100_100_12 */
47 #define PLLMR0_200_133_66
48 /* #define PLLMR0_266_160_80 */
49 /* #define PLLMR0_333_166_83 */
50 #endif
51
52 /*-----------------------------------------------------------------------
53  * Base addresses -- Note these are effective addresses where the
54  * actual resources get mapped (not physical addresses)
55  *----------------------------------------------------------------------*/
56 #define CONFIG_SYS_FLASH_BASE           0xfe000000
57 #define CONFIG_SYS_CPLD_BASE            0x80000000
58 #define CONFIG_SYS_NAND_ADDR            0xd0000000
59 #define CONFIG_SYS_USB_HOST             0xef603000      /* USB OHCI 1.1 controller      */
60
61 /*-----------------------------------------------------------------------
62  * Initial RAM & stack pointer
63  *----------------------------------------------------------------------*/
64 #define CONFIG_SYS_TEMP_STACK_OCM       1               /* OCM as init ram      */
65
66 /* On Chip Memory location */
67 #define CONFIG_SYS_OCM_DATA_ADDR        0xf8000000
68 #define CONFIG_SYS_OCM_DATA_SIZE        0x4000                  /* 16K of onchip SRAM           */
69 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR        /* inside of SRAM               */
70 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE        /* Size of used area in RAM     */
71
72 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
73 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
74
75 /*-----------------------------------------------------------------------
76  * Serial Port
77  *----------------------------------------------------------------------*/
78 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
79 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK                     /* external serial clock */
80 #define CONFIG_SYS_BASE_BAUD            691200
81
82 /*-----------------------------------------------------------------------
83  * Environment
84  *----------------------------------------------------------------------*/
85 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
86
87 /*-----------------------------------------------------------------------
88  * FLASH related
89  *----------------------------------------------------------------------*/
90 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
91 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
92
93 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
94 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
95 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
96
97 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
98 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
99
100 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
101 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
102
103 #ifdef CONFIG_ENV_IS_IN_FLASH
104 #define CONFIG_ENV_SECT_SIZE    0x40000 /* size of one complete sector  */
105 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
106 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
107
108 /* Address and size of Redundant Environment Sector     */
109 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
110 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
111 #endif
112
113 /*-----------------------------------------------------------------------
114  * RAM (CRAM)
115  *----------------------------------------------------------------------*/
116 #define CONFIG_SYS_MBYTES_RAM           64              /* 64MB                 */
117
118 /*-----------------------------------------------------------------------
119  * I2C
120  *----------------------------------------------------------------------*/
121 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
122
123 #define CONFIG_SYS_I2C_MULTI_EEPROMS
124 #define CONFIG_SYS_I2C_EEPROM_ADDR      (0xa8>>1)
125 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
126 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
127 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
128
129 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
130 #define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
131 #define CONFIG_DTT_AD7414       1               /* use AD7414           */
132 #define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
133 #define CONFIG_SYS_DTT_MAX_TEMP 70
134 #define CONFIG_SYS_DTT_LOW_TEMP -30
135 #define CONFIG_SYS_DTT_HYSTERESIS       3
136
137 /*-----------------------------------------------------------------------
138  * Ethernet
139  *----------------------------------------------------------------------*/
140 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
141 #define CONFIG_HAS_ETH0         1
142
143 /*
144  * Default environment variables
145  */
146 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
147         CONFIG_AMCC_DEF_ENV                                             \
148         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
149         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
150         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
151         "kernel_addr=fff10000\0"                                        \
152         "ramdisk_addr=fff20000\0"                                       \
153         "kozio=bootm ffc60000\0"                                        \
154         ""
155
156 #define CONFIG_USB_OHCI
157 #define CONFIG_USB_STORAGE
158
159 /* Partitions */
160 #define CONFIG_MAC_PARTITION
161 #define CONFIG_DOS_PARTITION
162 #define CONFIG_ISO_PARTITION
163
164 #define CONFIG_SUPPORT_VFAT
165
166 /*
167  * Commands additional to the ones defined in amcc-common.h
168  */
169 #define CONFIG_CMD_DTT
170 #define CONFIG_CMD_NAND
171 #define CONFIG_CMD_USB
172
173 /*-----------------------------------------------------------------------
174  * NAND FLASH
175  *----------------------------------------------------------------------*/
176 #define CONFIG_SYS_MAX_NAND_DEVICE      1
177 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
178 #define CONFIG_SYS_NAND_SELECT_DEVICE  1        /* nand driver supports mutipl. chips   */
179
180 /*-----------------------------------------------------------------------
181  * External Bus Controller (EBC) Setup
182  *----------------------------------------------------------------------*/
183 #define CONFIG_SYS_NAND_CS              3
184 /* Memory Bank 0 (Flash) initialization                                         */
185 #define CONFIG_SYS_EBC_PB0AP            0x03337200
186 #define CONFIG_SYS_EBC_PB0CR            0xfe0bc000
187
188 /* Memory Bank 3 (NAND-FLASH) initialization                                    */
189 #define CONFIG_SYS_EBC_PB3AP            0x018003c0
190 #define CONFIG_SYS_EBC_PB3CR            (CONFIG_SYS_NAND_ADDR | 0x1c000)
191
192 /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
193 /* Memory Bank 1 (CRAM) initialization                                          */
194 #define CONFIG_SYS_EBC_PB1AP            0x030400c0
195 #define CONFIG_SYS_EBC_PB1CR            0x000bc000
196
197 /* Memory Bank 2 (CRAM) initialization                                          */
198 #define CONFIG_SYS_EBC_PB2AP            0x030400c0
199 #define CONFIG_SYS_EBC_PB2CR            0x020bc000
200
201 /* Memory Bank 4 (CPLD) initialization                                          */
202 #define CONFIG_SYS_EBC_PB4AP            0x04006000
203 #define CONFIG_SYS_EBC_PB4CR            (CONFIG_SYS_CPLD_BASE | 0x18000)
204
205 #define CONFIG_SYS_EBC_CFG              0xf8400000
206
207 /*-----------------------------------------------------------------------
208  * GPIO Setup
209  *----------------------------------------------------------------------*/
210 #define CONFIG_SYS_GPIO_CRAM_CLK        8
211 #define CONFIG_SYS_GPIO_CRAM_WAIT       9               /* GPIO-In              */
212 #define CONFIG_SYS_GPIO_CRAM_ADV        10
213 #define CONFIG_SYS_GPIO_CRAM_CRE        (32 + 21)       /* GPIO-Out             */
214
215 /*-----------------------------------------------------------------------
216  * Definitions for GPIO_0 setup (PPC405EZ specific)
217  *
218  * GPIO0[0-2]   - External Bus Controller CS_4 - CS_6 Outputs
219  * GPIO0[3]     - NAND FLASH Controller CE3 (NFCE3) Output
220  * GPIO0[4]     - External Bus Controller Hold Input
221  * GPIO0[5]     - External Bus Controller Priority Input
222  * GPIO0[6]     - External Bus Controller HLDA Output
223  * GPIO0[7]     - External Bus Controller Bus Request Output
224  * GPIO0[8]     - CRAM Clk Output
225  * GPIO0[9]     - External Bus Controller Ready Input
226  * GPIO0[10]    - CRAM Adv Output
227  * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled
228  * GPIO0[25]    - External DMA Request Input
229  * GPIO0[26]    - External DMA EOT I/O
230  * GPIO0[25]    - External DMA Ack_n Output
231  * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
232  * GPIO0[28-30] - Trace Outputs / PWM Inputs
233  * GPIO0[31]    - PWM_8 I/O
234  */
235 #define CONFIG_SYS_GPIO0_TCR            0xC0A00000
236 #define CONFIG_SYS_GPIO0_OSRL           0x50004400
237 #define CONFIG_SYS_GPIO0_OSRH           0x02000055
238 #define CONFIG_SYS_GPIO0_ISR1L          0x00001000
239 #define CONFIG_SYS_GPIO0_ISR1H          0x00000055
240 #define CONFIG_SYS_GPIO0_TSRL           0x02000000
241 #define CONFIG_SYS_GPIO0_TSRH           0x00000055
242
243 /*-----------------------------------------------------------------------
244  * Definitions for GPIO_1 setup (PPC405EZ specific)
245  *
246  * GPIO1[0-6]   - PWM_9 to PWM_15 I/O
247  * GPIO1[7]     - PWM_DIV_CLK (Out) / IRQ4 Input
248  * GPIO1[8]     - TS5 Output / DAC_IP_TRIG Input
249  * GPIO1[9]     - TS6 Output / ADC_IP_TRIG Input
250  * GPIO1[10-12] - UART0 Control Inputs
251  * GPIO1[13]    - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
252  * GPIO1[14]    - UART0_RTS_N Output/SPI_SS_2_N Output
253  * GPIO1[15]    - SPI_SS_3_N Output/UART0_RI_N Input
254  * GPIO1[16]    - SPI_SS_1_N Output
255  * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
256  */
257 #define CONFIG_SYS_GPIO1_TCR            0xFFFF8414
258 #define CONFIG_SYS_GPIO1_OSRL           0x40000110
259 #define CONFIG_SYS_GPIO1_OSRH           0x55455555
260 #define CONFIG_SYS_GPIO1_ISR1L          0x15555445
261 #define CONFIG_SYS_GPIO1_ISR1H          0x00000000
262 #define CONFIG_SYS_GPIO1_TSRL           0x00000000
263 #define CONFIG_SYS_GPIO1_TSRH           0x00000000
264
265 #endif  /* __CONFIG_H */