include/configs/XPEDITE5200.h

   1 /*
   2  * Copyright 2008 Extreme Engineering Solutions, Inc.
   3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * xpedite5200 board configuration file
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33 #define CONFIG_BOOKE            1       /* BOOKE */
  34 #define CONFIG_E500             1       /* BOOKE e500 family */
  35 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  36 #define CONFIG_MPC8548          1
  37 #define CONFIG_XPEDITE5200      1
  38 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  39 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  40 #define CONFIG_RELOC_FIXUP_WORKS        /* Fully relocate to SDRAM */
  41
  42 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  43 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
  44 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  45 #define CONFIG_PCI1             1       /* PCI controller 1 */
  46 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  47 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  48 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  49
  50 /*
  51  * DDR config
  52  */
  53 #define CONFIG_FSL_DDR2
  54 #undef CONFIG_FSL_DDR_INTERACTIVE
  55 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  56 #define CONFIG_DDR_SPD
  57 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  58 #define SPD_EEPROM_ADDRESS              0x54
  59 #define CONFIG_NUM_DDR_CONTROLLERS      1
  60 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  61 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  62 #define CONFIG_DDR_ECC
  63 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  64 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  65 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  66 #define CONFIG_VERY_BIG_RAM
  67
  68 #define CONFIG_SYS_CLK_FREQ     66666666
  69
  70 /*
  71  * These can be toggled for performance analysis, otherwise use default.
  72  */
  73 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  74 #define CONFIG_BTB                      /* toggle branch predition */
  75 #define CONFIG_ENABLE_36BIT_PHYS        1
  76
  77 /*
  78  * Base addresses -- Note these are effective addresses where the
  79  * actual resources get mapped (not physical addresses)
  80  */
  81 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  82 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  83 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
  84 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  85 #define CONFIG_SYS_PCI1_ADDR    (CONFIG_SYS_CCSRBAR + 0x8000)
  86
  87 /*
  88  * Diagnostics
  89  */
  90 #define CONFIG_SYS_ALT_MEMTEST
  91 #define CONFIG_SYS_MEMTEST_START        0x10000000
  92 #define CONFIG_SYS_MEMTEST_END          0x20000000
  93
  94 /*
  95  * Memory map
  96  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  97  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  98  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  99  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
 100  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
 101  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
 102  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
 103  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
 104  */
 105
 106 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_4 | LCRR_EADC_3)
 107
 108 /*
 109  * NAND flash configuration
 110  */
 111 #define CONFIG_SYS_NAND_BASE            0xef800000
 112 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
 113 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 114 #define CONFIG_NAND_ACTL
 115 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
 116 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
 117 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
 118 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 119
 120 /*
 121  * NOR flash configuration
 122  */
 123 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 124 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 125 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 126 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 127 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 128 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 129 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 130 #define CONFIG_FLASH_CFI_DRIVER
 131 #define CONFIG_SYS_FLASH_CFI
 132 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 133                                                   {0xfbf40000, 0xc0000} }
 134 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 135
 136 /*
 137  * Chip select configuration
 138  */
 139 /* NOR Flash 0 on CS0 */
 140 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 141                                  BR_PS_16               | \
 142                                  BR_V)
 143 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 144                                  OR_GPCM_ACS_DIV4       | \
 145                                  OR_GPCM_SCY_8)
 146
 147 /* NOR Flash 1 on CS1 */
 148 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 149                                  BR_PS_16               | \
 150                                  BR_V)
 151 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 152
 153 /* NAND flash on CS2 */
 154 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 155                                  BR_PS_8                | \
 156                                  BR_V)
 157
 158 /* NAND flash on CS2 */
 159 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 160                                  OR_GPCM_BCTLD          | \
 161                                  OR_GPCM_CSNT           | \
 162                                  OR_GPCM_ACS_DIV4       | \
 163                                  OR_GPCM_SCY_4          | \
 164                                  OR_GPCM_TRLX           | \
 165                                  OR_GPCM_EHTR)
 166
 167 /* NAND flash on CS3 */
 168 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 169                                  BR_PS_8                | \
 170                                  BR_V)
 171 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 172
 173 /*
 174  * Use L1 as initial stack
 175  */
 176 #define CONFIG_SYS_INIT_RAM_LOCK        1
 177 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 178 #define CONFIG_SYS_INIT_RAM_END         0x4000
 179
 180 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 181 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 182 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 183
 184 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 185 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 186
 187 /*
 188  * Serial Port
 189  */
 190 #define CONFIG_CONS_INDEX               1
 191 #define CONFIG_SYS_NS16550
 192 #define CONFIG_SYS_NS16550_SERIAL
 193 #define CONFIG_SYS_NS16550_REG_SIZE     1
 194 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 195 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 196 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 197 #define CONFIG_SYS_BAUDRATE_TABLE       \
 198         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 199 #define CONFIG_BAUDRATE                 115200
 200 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 201 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 202
 203 /*
 204  * Use the HUSH parser
 205  */
 206 #define CONFIG_SYS_HUSH_PARSER
 207 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 208
 209 /*
 210  * Pass open firmware flat tree
 211  */
 212 #define CONFIG_OF_LIBFDT                1
 213 #define CONFIG_OF_BOARD_SETUP           1
 214 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 215
 216 #define CONFIG_SYS_64BIT_VSPRINTF       1
 217 #define CONFIG_SYS_64BIT_STRTOUL        1
 218
 219 /*
 220  * I2C
 221  */
 222 #define CONFIG_FSL_I2C                          /* Use FSL common I2C driver */
 223 #define CONFIG_HARD_I2C                         /* I2C with hardware support */
 224 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 225 #define CONFIG_SYS_I2C_SLAVE            0x7F
 226 #define CONFIG_SYS_I2C_OFFSET           0x3000
 227 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 228 #define CONFIG_I2C_MULTI_BUS
 229 #define CONFIG_I2C_CMD_TREE
 230
 231 /* I2C EEPROM */
 232 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 233 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 235 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 236
 237 /* I2C RTC */
 238 #define CONFIG_RTC_M41T11                       1
 239 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 240 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 241
 242 /* GPIO */
 243 #define CONFIG_PCA953X
 244 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 245 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 246 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 247
 248 /* PCA957 @ 0x18 */
 249 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 250 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 251 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 252 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 253 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 254 #define CONFIG_SYS_PCA953X_FLASH_WP             0x20
 255 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 256 #define CONFIG_SYS_PCA953X_EREADY               0x80
 257
 258 /* PCA957 @ 0x19 */
 259 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 260 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 261 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 262 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 263 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 264 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 265 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 266 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 267
 268 /*
 269  * General PCI
 270  * Memory space is mapped 1-1, but I/O space must start from 0.
 271  */
 272 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 273 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 274 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 275 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 276 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 277 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 278
 279 /*
 280  * Networking options
 281  */
 282 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 283 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 284 #define CONFIG_NET_MULTI        1
 285 #define CONFIG_MII              1       /* MII PHY management */
 286 #define CONFIG_ETHPRIME         "eTSEC1"
 287
 288 #define CONFIG_TSEC1            1
 289 #define CONFIG_TSEC1_NAME       "eTSEC1"
 290 #define TSEC1_FLAGS             TSEC_GIGABIT
 291 #define TSEC1_PHY_ADDR          1
 292 #define TSEC1_PHYIDX            0
 293 #define CONFIG_HAS_ETH0
 294
 295 #define CONFIG_TSEC2            1
 296 #define CONFIG_TSEC2_NAME       "eTSEC2"
 297 #define TSEC2_FLAGS             TSEC_GIGABIT
 298 #define TSEC2_PHY_ADDR          2
 299 #define TSEC2_PHYIDX            0
 300 #define CONFIG_HAS_ETH1
 301
 302 #define CONFIG_TSEC3    1
 303 #define CONFIG_TSEC3_NAME       "eTSEC3"
 304 #define TSEC3_FLAGS             TSEC_GIGABIT
 305 #define TSEC3_PHY_ADDR          3
 306 #define TSEC3_PHYIDX            0
 307 #define CONFIG_HAS_ETH2
 308
 309 #define CONFIG_TSEC4    1
 310 #define CONFIG_TSEC4_NAME       "eTSEC4"
 311 #define TSEC4_FLAGS             TSEC_GIGABIT
 312 #define TSEC4_PHY_ADDR          4
 313 #define TSEC4_PHYIDX            0
 314 #define CONFIG_HAS_ETH3
 315
 316 /*
 317  * BOOTP options
 318  */
 319 #define CONFIG_BOOTP_BOOTFILESIZE
 320 #define CONFIG_BOOTP_BOOTPATH
 321 #define CONFIG_BOOTP_GATEWAY
 322
 323 /*
 324  * Command configuration.
 325  */
 326 #include <config_cmd_default.h>
 327
 328 #define CONFIG_CMD_ASKENV
 329 #define CONFIG_CMD_DATE
 330 #define CONFIG_CMD_DHCP
 331 #define CONFIG_CMD_EEPROM
 332 #define CONFIG_CMD_ELF
 333 #define CONFIG_CMD_SAVEENV
 334 #define CONFIG_CMD_FLASH
 335 #define CONFIG_CMD_I2C
 336 #define CONFIG_CMD_JFFS2
 337 #define CONFIG_CMD_MII
 338 #define CONFIG_CMD_NAND
 339 #define CONFIG_CMD_NET
 340 #define CONFIG_CMD_PCA953X
 341 #define CONFIG_CMD_PCA953X_INFO
 342 #define CONFIG_CMD_PCI
 343 #define CONFIG_CMD_PING
 344 #define CONFIG_CMD_SNTP
 345
 346 /*
 347  * Miscellaneous configurable options
 348  */
 349 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 350 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 351 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 352 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 353 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 354 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 355 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 356 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 357 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
 358 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 359 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
 360 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 361 #define CONFIG_PREBOOT                          /* enable preboot variable */
 362 #define CONFIG_FIT              1
 363 #define CONFIG_FIT_VERBOSE      1
 364 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 365 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 366
 367 /*
 368  * For booting Linux, the board info and command line data
 369  * have to be in the first 16 MB of memory, since this is
 370  * the maximum mapped by the Linux kernel during initialization.
 371  */
 372 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 373
 374 /*
 375  * Boot Flags
 376  */
 377 #define BOOTFLAG_COLD           0x01            /* Normal Power-On: Boot from FLASH */
 378 #define BOOTFLAG_WARM           0x02            /* Software reboot */
 379
 380 /*
 381  * Environment Configuration
 382  */
 383 #define CONFIG_ENV_IS_IN_FLASH  1
 384 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 385 #define CONFIG_ENV_SIZE         0x8000
 386 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 387
 388 /*
 389  * Flash memory map:
 390  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 391  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 392  * fff00000 - fff3ffff     Pri FDT (256KB)
 393  * fef00000 - ffefffff     Pri OS image (16MB)
 394  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 395  *
 396  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 397  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 398  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 399  * faf00000 - fbefffff     Sec OS image (16MB)
 400  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 401  */
 402 #define CONFIG_UBOOT1_ENV_ADDR  MK_STR(0xfff80000)
 403 #define CONFIG_UBOOT2_ENV_ADDR  MK_STR(0xfbf80000)
 404 #define CONFIG_FDT1_ENV_ADDR    MK_STR(0xfff00000)
 405 #define CONFIG_FDT2_ENV_ADDR    MK_STR(0xfbf00000)
 406 #define CONFIG_OS1_ENV_ADDR     MK_STR(0xfef00000)
 407 #define CONFIG_OS2_ENV_ADDR     MK_STR(0xfaf00000)
 408
 409 #define CONFIG_PROG_UBOOT1                                              \
 410         "$download_cmd $loadaddr $ubootfile; "                          \
 411         "if test $? -eq 0; then "                                       \
 412                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 413                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 414                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 415                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 416                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 417                 "if test $? -ne 0; then "                               \
 418                         "echo PROGRAM FAILED; "                         \
 419                 "else; "                                                \
 420                         "echo PROGRAM SUCCEEDED; "                      \
 421                 "fi; "                                                  \
 422         "else; "                                                        \
 423                 "echo DOWNLOAD FAILED; "                                \
 424         "fi;"
 425
 426 #define CONFIG_PROG_UBOOT2                                              \
 427         "$download_cmd $loadaddr $ubootfile; "                          \
 428         "if test $? -eq 0; then "                                       \
 429                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 430                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 431                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 432                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 433                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 434                 "if test $? -ne 0; then "                               \
 435                         "echo PROGRAM FAILED; "                         \
 436                 "else; "                                                \
 437                         "echo PROGRAM SUCCEEDED; "                      \
 438                 "fi; "                                                  \
 439         "else; "                                                        \
 440                 "echo DOWNLOAD FAILED; "                                \
 441         "fi;"
 442
 443 #define CONFIG_BOOT_OS_NET                                              \
 444         "$download_cmd $osaddr $osfile; "                               \
 445         "if test $? -eq 0; then "                                       \
 446                 "if test -n $fdtaddr; then "                            \
 447                         "$download_cmd $fdtaddr $fdtfile; "             \
 448                         "if test $? -eq 0; then "                       \
 449                                 "bootm $osaddr - $fdtaddr; "            \
 450                         "else; "                                        \
 451                                 "echo FDT DOWNLOAD FAILED; "            \
 452                         "fi; "                                          \
 453                 "else; "                                                \
 454                         "bootm $osaddr; "                               \
 455                 "fi; "                                                  \
 456         "else; "                                                        \
 457                 "echo OS DOWNLOAD FAILED; "                             \
 458         "fi;"
 459
 460 #define CONFIG_PROG_OS1                                                 \
 461         "$download_cmd $osaddr $osfile; "                               \
 462         "if test $? -eq 0; then "                                       \
 463                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 464                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 465                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 466                 "if test $? -ne 0; then "                               \
 467                         "echo OS PROGRAM FAILED; "                      \
 468                 "else; "                                                \
 469                         "echo OS PROGRAM SUCCEEDED; "                   \
 470                 "fi; "                                                  \
 471         "else; "                                                        \
 472                 "echo OS DOWNLOAD FAILED; "                             \
 473         "fi;"
 474
 475 #define CONFIG_PROG_OS2                                                 \
 476         "$download_cmd $osaddr $osfile; "                               \
 477         "if test $? -eq 0; then "                                       \
 478                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 479                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 480                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 481                 "if test $? -ne 0; then "                               \
 482                         "echo OS PROGRAM FAILED; "                      \
 483                 "else; "                                                \
 484                         "echo OS PROGRAM SUCCEEDED; "                   \
 485                 "fi; "                                                  \
 486         "else; "                                                        \
 487                 "echo OS DOWNLOAD FAILED; "                             \
 488         "fi;"
 489
 490 #define CONFIG_PROG_FDT1                                                \
 491         "$download_cmd $fdtaddr $fdtfile; "                             \
 492         "if test $? -eq 0; then "                                       \
 493                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 494                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 495                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 496                 "if test $? -ne 0; then "                               \
 497                         "echo FDT PROGRAM FAILED; "                     \
 498                 "else; "                                                \
 499                         "echo FDT PROGRAM SUCCEEDED; "                  \
 500                 "fi; "                                                  \
 501         "else; "                                                        \
 502                 "echo FDT DOWNLOAD FAILED; "                            \
 503         "fi;"
 504
 505 #define CONFIG_PROG_FDT2                                                \
 506         "$download_cmd $fdtaddr $fdtfile; "                             \
 507         "if test $? -eq 0; then "                                       \
 508                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 509                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 510                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 511                 "if test $? -ne 0; then "                               \
 512                         "echo FDT PROGRAM FAILED; "                     \
 513                 "else; "                                                \
 514                         "echo FDT PROGRAM SUCCEEDED; "                  \
 515                 "fi; "                                                  \
 516         "else; "                                                        \
 517                 "echo FDT DOWNLOAD FAILED; "                            \
 518         "fi;"
 519
 520 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 521         "autoload=yes\0"                                                \
 522         "download_cmd=tftp\0"                                           \
 523         "console_args=console=ttyS0,115200\0"                           \
 524         "root_args=root=/dev/nfs rw\0"                                  \
 525         "misc_args=ip=on\0"                                             \
 526         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 527         "bootfile=/home/user/file\0"                                    \
 528         "osfile=/home/user/uImage-XPedite5200\0"                        \
 529         "fdtfile=/home/user/xpedite5200.dtb\0"                          \
 530         "ubootfile=/home/user/u-boot.bin\0"                             \
 531         "fdtaddr=c00000\0"                                              \
 532         "osaddr=0x1000000\0"                                            \
 533         "loadaddr=0x1000000\0"                                          \
 534         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 535         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 536         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 537         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 538         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 539         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 540         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 541         "bootcmd_flash1=run set_bootargs; "                             \
 542                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 543         "bootcmd_flash2=run set_bootargs; "                             \
 544                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 545         "bootcmd=run bootcmd_flash1\0"
 546 #endif  /* __CONFIG_H */