include/configs/XPEDITE5170.h

   1 /*
   2  * Copyright 2009 Extreme Engineering Solutions, Inc.
   3  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * xpedite5170 board configuration file
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33 #define CONFIG_MPC86xx          1       /* MPC86xx */
  34 #define CONFIG_MPC8641          1       /* MPC8641 specific */
  35 #define CONFIG_XPEDITE5140      1       /* MPC8641HPCN board specific */
  36 #define CONFIG_SYS_BOARD_NAME   "XPedite5170"
  37 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  38 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  39 #define CONFIG_BAT_RW           1       /* Use common BAT rw code */
  40 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  41 #define CONFIG_ALTIVEC          1
  42
  43 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  44 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
  45 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  46 #define CONFIG_PCIE1            1       /* PCIE controler 1 */
  47 #define CONFIG_PCIE2            1       /* PCIE controler 2 */
  48 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  49 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  50 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  51
  52 /*
  53  * DDR config
  54  */
  55 #define CONFIG_FSL_DDR2
  56 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  57 #define CONFIG_DDR_SPD
  58 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  59 #define SPD_EEPROM_ADDRESS1             0x54    /* Both channels use the */
  60 #define SPD_EEPROM_ADDRESS2             0x54    /* same SPD data         */
  61 #define SPD_EEPROM_OFFSET               0x200   /* OFFSET of SPD in EEPROM */
  62 #define CONFIG_NUM_DDR_CONTROLLERS      2
  63 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  64 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  65 #define CONFIG_DDR_ECC
  66 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  67 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  68 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  69 #define CONFIG_VERY_BIG_RAM
  70 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
  71
  72 /*
  73  * virtual address to be used for temporary mappings.  There
  74  * should be 128k free at this VA.
  75  */
  76 #define CONFIG_SYS_SCRATCH_VA   0xe0000000
  77
  78 #ifndef __ASSEMBLY__
  79 extern unsigned long get_board_sys_clk(unsigned long dummy);
  80 #endif
  81
  82 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC86xx */
  83
  84 /*
  85  * L2CR setup
  86  */
  87 #define CONFIG_SYS_L2
  88 #define L2_INIT         0
  89 #define L2_ENABLE       (L2CR_L2E)
  90
  91 /*
  92  * Base addresses -- Note these are effective addresses where the
  93  * actual resources get mapped (not physical addresses)
  94  */
  95 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  96 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  97 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR
  98 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  99 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
 100 #define CONFIG_SYS_IMMR                 CONFIG_SYS_CCSRBAR
 101
 102 /*
 103  * Diagnostics
 104  */
 105 #define CONFIG_SYS_ALT_MEMTEST
 106 #define CONFIG_SYS_MEMTEST_START        0x10000000
 107 #define CONFIG_SYS_MEMTEST_END          0x20000000
 108
 109 /*
 110  * Memory map
 111  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 112  * 0x8000_0000  0xbfff_ffff     PCIe1 Mem               1G non-cacheable
 113  * 0xc000_0000  0xcfff_ffff     PCIe2 Mem               256M non-cacheable
 114  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
 115  * 0xe800_0000  0xe87f_ffff     PCIe1 IO                8M non-cacheable
 116  * 0xe880_0000  0xe8ff_ffff     PCIe2 IO                8M non-cacheable
 117  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
 118  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
 119  * 0xf000_0000  0xf7ff_ffff     NOR Flash 2             128M non-cacheable
 120  * 0xf800_0000  0xffff_ffff     NOR Flash 1             128M non-cacheable
 121  */
 122
 123 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_4 | LCRR_EADC_3)
 124
 125 /*
 126  * NAND flash configuration
 127  */
 128 #define CONFIG_SYS_NAND_BASE            0xef800000
 129 #define CONFIG_SYS_NAND_BASE2           0xef840000      /* Unused at this time */
 130 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2}
 131 #define CONFIG_SYS_MAX_NAND_DEVICE      2
 132 #define CONFIG_NAND_ACTL
 133 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 14)       /* C_LA14 */
 134 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 15)       /* C_LA15 */
 135 #define CONFIG_SYS_NAND_ACTL_NCE        0               /* NCE not controlled by ADDR */
 136 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 137 #define CONFIG_SYS_NAND_QUIET_TEST
 138 #define CONFIG_JFFS2_NAND
 139
 140 /*
 141  * NOR flash configuration
 142  */
 143 #define CONFIG_SYS_FLASH_BASE           0xf8000000
 144 #define CONFIG_SYS_FLASH_BASE2          0xf0000000
 145 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 146 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 147 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 148 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 149 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 150 #define CONFIG_FLASH_CFI_DRIVER
 151 #define CONFIG_SYS_FLASH_CFI
 152 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 153 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff00000, 0xc0000}, \
 154                                                   {0xf7f00000, 0xc0000} }
 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 156 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 157
 158 /*
 159  * Chip select configuration
 160  */
 161 /* NOR Flash 0 on CS0 */
 162 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  |\
 163                                  BR_PS_16               |\
 164                                  BR_V)
 165 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_128MB            |\
 166                                  OR_GPCM_CSNT           |\
 167                                  OR_GPCM_XACS           |\
 168                                  OR_GPCM_ACS_DIV2       |\
 169                                  OR_GPCM_SCY_8          |\
 170                                  OR_GPCM_TRLX           |\
 171                                  OR_GPCM_EHTR           |\
 172                                  OR_GPCM_EAD)
 173
 174 /* NOR Flash 1 on CS1 */
 175 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 |\
 176                                  BR_PS_16               |\
 177                                  BR_V)
 178 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 179
 180 /* NAND flash on CS2 */
 181 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   |\
 182                                  BR_PS_8                |\
 183                                  BR_V)
 184 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            |\
 185                                  OR_GPCM_BCTLD          |\
 186                                  OR_GPCM_CSNT           |\
 187                                  OR_GPCM_ACS_DIV4       |\
 188                                  OR_GPCM_SCY_4          |\
 189                                  OR_GPCM_TRLX           |\
 190                                  OR_GPCM_EHTR)
 191
 192 /* Optional NAND flash on CS3 */
 193 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  |\
 194                                  BR_PS_8                |\
 195                                  BR_V)
 196 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 197
 198 /*
 199  * Use L1 as initial stack
 200  */
 201 #define CONFIG_SYS_INIT_RAM_LOCK        1
 202 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 203 #define CONFIG_SYS_INIT_RAM_END         0x00004000
 204
 205 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* num bytes initial data */
 206 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 207 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 208
 209 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 210 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 211
 212 /*
 213  * Serial Port
 214  */
 215 #define CONFIG_CONS_INDEX               1
 216 #define CONFIG_SYS_NS16550
 217 #define CONFIG_SYS_NS16550_SERIAL
 218 #define CONFIG_SYS_NS16550_REG_SIZE     1
 219 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 220 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 221 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 222 #define CONFIG_SYS_BAUDRATE_TABLE       \
 223         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 224 #define CONFIG_BAUDRATE                 115200
 225 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 226 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 227
 228 /*
 229  * Use the HUSH parser
 230  */
 231 #define CONFIG_SYS_HUSH_PARSER
 232 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 233
 234 /*
 235  * Pass open firmware flat tree
 236  */
 237 #define CONFIG_OF_LIBFDT                1
 238 #define CONFIG_OF_BOARD_SETUP           1
 239 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 240
 241 /*
 242  * I2C
 243  */
 244 #define CONFIG_FSL_I2C                          /* Use FSL common I2C driver */
 245 #define CONFIG_HARD_I2C                         /* I2C with hardware support */
 246 #define CONFIG_SYS_I2C_SPEED            100000  /* M41T00 only supports 100 KHz */
 247 #define CONFIG_SYS_I2C_SLAVE            0x7F
 248 #define CONFIG_SYS_I2C_OFFSET           0x3000
 249 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 250 #define CONFIG_I2C_MULTI_BUS
 251
 252 /* PEX8518 slave I2C interface */
 253 #define CONFIG_SYS_I2C_PEX8518_ADDR     0x70
 254
 255 /* I2C DS1631 temperature sensor */
 256 #define CONFIG_SYS_I2C_DS1621_ADDR      0x48
 257 #define CONFIG_DTT_DS1621
 258 #define CONFIG_DTT_SENSORS              { 0 }
 259
 260 /* I2C EEPROM - AT24C128B */
 261 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x54
 262 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 263 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 264 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 265
 266 /* I2C RTC */
 267 #define CONFIG_RTC_M41T11               1
 268 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 269 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 270
 271 /* GPIO/EEPROM/SRAM */
 272 #define CONFIG_DS4510
 273 #define CONFIG_SYS_I2C_DS4510_ADDR      0x51
 274
 275 /* GPIO */
 276 #define CONFIG_PCA953X
 277 #define CONFIG_SYS_I2C_PCA953X_ADDR0    0x18
 278 #define CONFIG_SYS_I2C_PCA953X_ADDR1    0x1c
 279 #define CONFIG_SYS_I2C_PCA953X_ADDR2    0x1e
 280 #define CONFIG_SYS_I2C_PCA953X_ADDR3    0x1f
 281 #define CONFIG_SYS_I2C_PCA953X_ADDR     CONFIG_SYS_I2C_PCA953X_ADDR0
 282
 283 /*
 284  * PU = pulled high, PD = pulled low
 285  * I = input, O = output, IO = input/output
 286  */
 287 /* PCA9557 @ 0x18*/
 288 #define CONFIG_SYS_PCA953X_C0_SER0_EN           0x01 /* PU; UART0 enable (1: enabled) */
 289 #define CONFIG_SYS_PCA953X_C0_SER0_MODE         0x02 /* PU; UART0 serial mode select */
 290 #define CONFIG_SYS_PCA953X_C0_SER1_EN           0x04 /* PU; UART1 enable (1: enabled) */
 291 #define CONFIG_SYS_PCA953X_C0_SER1_MODE         0x08 /* PU; UART1 serial mode select */
 292 #define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS     0x10 /* PU; Boot flash CS select */
 293 #define CONFIG_SYS_PCA953X_NVM_WP               0x20 /* PU; Set to 0 to enable NVM writing */
 294
 295 /* PCA9557 @ 0x1c*/
 296 #define CONFIG_SYS_PCA953X_XMC0_ROOT0           0x01 /* PU; Low if XMC is RC */
 297 #define CONFIG_SYS_PCA953X_PLUG_GPIO0           0x02 /* Samtec connector GPIO */
 298 #define CONFIG_SYS_PCA953X_XMC0_WAKE            0x04 /* PU; XMC wake */
 299 #define CONFIG_SYS_PCA953X_XMC0_BIST            0x08 /* PU; XMC built in self test */
 300 #define CONFIG_SYS_PCA953X_XMC_PRESENT          0x10 /* PU; Low if XMC module installed */
 301 #define CONFIG_SYS_PCA953X_PMC_PRESENT          0x20 /* PU; Low if PMC module installed */
 302 #define CONFIG_SYS_PCA953X_PMC0_MONARCH         0x40 /* PMC monarch mode enable */
 303 #define CONFIG_SYS_PCA953X_PMC0_EREADY          0x80 /* PU; PMC PCI eready */
 304
 305 /* PCA9557 @ 0x1e*/
 306 #define CONFIG_SYS_PCA953X_P0_GA0               0x01 /* PU; VPX Geographical address */
 307 #define CONFIG_SYS_PCA953X_P0_GA1               0x02 /* PU; VPX Geographical address */
 308 #define CONFIG_SYS_PCA953X_P0_GA2               0x04 /* PU; VPX Geographical address */
 309 #define CONFIG_SYS_PCA953X_P0_GA3               0x08 /* PU; VPX Geographical address */
 310 #define CONFIG_SYS_PCA953X_P0_GA4               0x10 /* PU; VPX Geographical address */
 311 #define CONFIG_SYS_PCA953X_P0_GAP               0x20 /* PU; VPX Geographical address parity */
 312 #define CONFIG_SYS_PCA953X_P1_SYSEN             0x80 /* PU; VPX P1 SYSCON */
 313
 314 /* PCA9557 @ 0x1f */
 315 #define CONFIG_SYS_PCA953X_VPX_GPIO0            0x01 /* PU; VPX P15 GPIO */
 316 #define CONFIG_SYS_PCA953X_VPX_GPIO1            0x02 /* PU; VPX P15 GPIO */
 317 #define CONFIG_SYS_PCA953X_VPX_GPIO2            0x04 /* PU; VPX P15 GPIO */
 318 #define CONFIG_SYS_PCA953X_VPX_GPIO3            0x08 /* PU; VPX P15 GPIO */
 319
 320 /*
 321  * General PCI
 322  * Memory space is mapped 1-1, but I/O space must start from 0.
 323  */
 324 /* PCIE1 - PEX8518 */
 325 #define CONFIG_SYS_PCIE1_MEM_BASE       0x80000000
 326 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BASE
 327 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x40000000      /* 1G */
 328 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 329 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe8000000
 330 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 331
 332 /* PCIE2 - VPX P1 */
 333 #define CONFIG_SYS_PCIE2_MEM_BASE       0xc0000000
 334 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BASE
 335 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 336 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 337 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe8800000
 338 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000      /* 8M */
 339
 340 /*
 341  * Networking options
 342  */
 343 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 344 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 345 #define CONFIG_NET_MULTI        1
 346 #define CONFIG_MII              1       /* MII PHY management */
 347 #define CONFIG_ETHPRIME         "eTSEC1"
 348
 349 #define CONFIG_TSEC1            1
 350 #define CONFIG_TSEC1_NAME       "eTSEC1"
 351 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 352 #define TSEC1_PHY_ADDR          1
 353 #define TSEC1_PHYIDX            0
 354 #define CONFIG_HAS_ETH0
 355
 356 #define CONFIG_TSEC2            1
 357 #define CONFIG_TSEC2_NAME       "eTSEC2"
 358 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 359 #define TSEC2_PHY_ADDR          2
 360 #define TSEC2_PHYIDX            0
 361 #define CONFIG_HAS_ETH1
 362
 363 /*
 364  * BAT mappings
 365  */
 366 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 367 #define CONFIG_SYS_CCSR_DEFAULT_DBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 368                                          BATL_PP_RW                     |\
 369                                          BATL_CACHEINHIBIT              |\
 370                                          BATL_GUARDEDSTORAGE)
 371 #define CONFIG_SYS_CCSR_DEFAULT_DBATU   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 372                                          BATU_BL_1M                     |\
 373                                          BATU_VS                        |\
 374                                          BATU_VP)
 375 #define CONFIG_SYS_CCSR_DEFAULT_IBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 376                                          BATL_PP_RW                     |\
 377                                          BATL_CACHEINHIBIT)
 378 #define CONFIG_SYS_CCSR_DEFAULT_IBATU   CONFIG_SYS_CCSR_DEFAULT_DBATU
 379 #endif
 380
 381 /*
 382  * BAT0         2G      Cacheable, non-guarded
 383  * 0x0000_0000  2G      DDR
 384  */
 385 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 386 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 387 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 388 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 389
 390 /*
 391  * BAT1         1G      Cache-inhibited, guarded
 392  * 0x8000_0000  1G      PCI-Express 1 Memory
 393  */
 394 #define CONFIG_SYS_DBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 395                                  BATL_PP_RW                     |\
 396                                  BATL_CACHEINHIBIT              |\
 397                                  BATL_GUARDEDSTORAGE)
 398 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 399                                  BATU_BL_1G                     |\
 400                                  BATU_VS                        |\
 401                                  BATU_VP)
 402 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 403                                  BATL_PP_RW                     |\
 404                                  BATL_CACHEINHIBIT)
 405 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 406
 407 /*
 408  * BAT2         512M    Cache-inhibited, guarded
 409  * 0xc000_0000  512M    PCI-Express 2 Memory
 410  */
 411 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 412                                  BATL_PP_RW                     |\
 413                                  BATL_CACHEINHIBIT              |\
 414                                  BATL_GUARDEDSTORAGE)
 415 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 416                                  BATU_BL_512M                   |\
 417                                  BATU_VS                        |\
 418                                  BATU_VP)
 419 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 420                                  BATL_PP_RW                     |\
 421                                  BATL_CACHEINHIBIT)
 422 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 423
 424 /*
 425  * BAT3         1M      Cache-inhibited, guarded
 426  * 0xe000_0000  1M      CCSR
 427  */
 428 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR             |\
 429                                  BATL_PP_RW                     |\
 430                                  BATL_CACHEINHIBIT              |\
 431                                  BATL_GUARDEDSTORAGE)
 432 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR             |\
 433                                  BATU_BL_1M                     |\
 434                                  BATU_VS                        |\
 435                                  BATU_VP)
 436 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR             |\
 437                                  BATL_PP_RW                     |\
 438                                  BATL_CACHEINHIBIT)
 439 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 440
 441 /*
 442  * BAT4         32M     Cache-inhibited, guarded
 443  * 0xe200_0000  16M     PCI-Express 1 I/O
 444  * 0xe300_0000  16M     PCI-Express 2 I/0
 445  */
 446 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 447                                  BATL_PP_RW                     |\
 448                                  BATL_CACHEINHIBIT              |\
 449                                  BATL_GUARDEDSTORAGE)
 450 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 451                                  BATU_BL_32M                    |\
 452                                  BATU_VS                        |\
 453                                  BATU_VP)
 454 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 455                                  BATL_PP_RW                     |\
 456                                  BATL_CACHEINHIBIT)
 457 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 458
 459 /*
 460  * BAT5         128K    Cacheable, non-guarded
 461  * 0xe400_1000  128K    Init RAM for stack in the CPU DCache (no backing memory)
 462  */
 463 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR       |\
 464                                  BATL_PP_RW                     |\
 465                                  BATL_MEMCOHERENCE)
 466 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR       |\
 467                                  BATU_BL_128K                   |\
 468                                  BATU_VS                        |\
 469                                  BATU_VP)
 470 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 471 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 472
 473 /*
 474  * BAT6         256M    Cache-inhibited, guarded
 475  * 0xf000_0000  256M    FLASH
 476  */
 477 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_FLASH_BASE2         |\
 478                                  BATL_PP_RW                     |\
 479                                  BATL_CACHEINHIBIT              |\
 480                                  BATL_GUARDEDSTORAGE)
 481 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE          |\
 482                                  BATU_BL_256M                   |\
 483                                  BATU_VS                        |\
 484                                  BATU_VP)
 485 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_FLASH_BASE          |\
 486                                  BATL_PP_RW                     |\
 487                                  BATL_MEMCOHERENCE)
 488 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 489
 490 /* Map the last 1M of flash where we're running from reset */
 491 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 492                                  BATL_PP_RW                     |\
 493                                  BATL_CACHEINHIBIT              |\
 494                                  BATL_GUARDEDSTORAGE)
 495 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE                   |\
 496                                  BATU_BL_1M                     |\
 497                                  BATU_VS                        |\
 498                                  BATU_VP)
 499 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 500                                  BATL_PP_RW                     |\
 501                                  BATL_MEMCOHERENCE)
 502 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 503
 504 /*
 505  * BAT7         64M     Cache-inhibited, guarded
 506  * 0xe800_0000  64K     NAND FLASH
 507  * 0xe804_0000  128K    DUART Registers
 508  */
 509 #define CONFIG_SYS_DBAT7L       (CONFIG_SYS_NAND_BASE           |\
 510                                  BATL_PP_RW                     |\
 511                                  BATL_CACHEINHIBIT              |\
 512                                  BATL_GUARDEDSTORAGE)
 513 #define CONFIG_SYS_DBAT7U       (CONFIG_SYS_NAND_BASE           |\
 514                                  BATU_BL_512K                   |\
 515                                  BATU_VS                        |\
 516                                  BATU_VP)
 517 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_NAND_BASE           |\
 518                                  BATL_PP_RW                     |\
 519                                  BATL_CACHEINHIBIT)
 520 #define CONFIG_SYS_IBAT7U       CONFIG_SYS_DBAT7U
 521
 522 /*
 523  * Command configuration.
 524  */
 525 #include <config_cmd_default.h>
 526
 527 #define CONFIG_CMD_ASKENV
 528 #define CONFIG_CMD_DATE
 529 #define CONFIG_CMD_DHCP
 530 #define CONFIG_CMD_DS4510
 531 #define CONFIG_CMD_DS4510_INFO
 532 #define CONFIG_CMD_DTT
 533 #define CONFIG_CMD_EEPROM
 534 #define CONFIG_CMD_ELF
 535 #define CONFIG_CMD_SAVEENV
 536 #define CONFIG_CMD_FLASH
 537 #define CONFIG_CMD_I2C
 538 #define CONFIG_CMD_IRQ
 539 #define CONFIG_CMD_JFFS2
 540 #define CONFIG_CMD_MII
 541 #define CONFIG_CMD_NAND
 542 #define CONFIG_CMD_NET
 543 #define CONFIG_CMD_PCA953X
 544 #define CONFIG_CMD_PCA953X_INFO
 545 #define CONFIG_CMD_PCI
 546 #define CONFIG_CMD_PING
 547 #define CONFIG_CMD_REGINFO
 548 #define CONFIG_CMD_SNTP
 549
 550 /*
 551  * Miscellaneous configurable options
 552  */
 553 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 554 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 555 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 556 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 557 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 558 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 559 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 560 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 561 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
 562 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 563 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
 564 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 565 #define CONFIG_PREBOOT                          /* enable preboot variable */
 566 #define CONFIG_FIT              1
 567 #define CONFIG_FIT_VERBOSE      1
 568 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 569
 570 /*
 571  * For booting Linux, the board info and command line data
 572  * have to be in the first 16 MB of memory, since this is
 573  * the maximum mapped by the Linux kernel during initialization.
 574  */
 575 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 576 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 577
 578 /*
 579  * Boot Flags
 580  */
 581 #define BOOTFLAG_COLD           0x01            /* Normal Power-On: Boot from FLASH */
 582 #define BOOTFLAG_WARM           0x02            /* Software reboot */
 583
 584 /*
 585  * Environment Configuration
 586  */
 587 #define CONFIG_ENV_IS_IN_FLASH  1
 588 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 589 #define CONFIG_ENV_SIZE         0x8000
 590 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 591
 592 /*
 593  * Flash memory map:
 594  * fffc0000 - ffffffff  Pri FDT (256KB)
 595  * fff80000 - fffbffff  Pri U-Boot Environment (256 KB)
 596  * fff00000 - fff7ffff  Pri U-Boot (512 KB)
 597  * fef00000 - ffefffff  Pri OS image (16MB)
 598  * f8000000 - feefffff  Pri OS Use/Filesystem (111MB)
 599  *
 600  * f7fc0000 - f7ffffff  Sec FDT (256KB)
 601  * f7f80000 - f7fbffff  Sec U-Boot Environment (256 KB)
 602  * f7f00000 - f7f7ffff  Sec U-Boot (512 KB)
 603  * f6f00000 - f7efffff  Sec OS image (16MB)
 604  * f0000000 - f6efffff  Sec OS Use/Filesystem (111MB)
 605  */
 606 #define CONFIG_UBOOT1_ENV_ADDR  MK_STR(0xfff00000)
 607 #define CONFIG_UBOOT2_ENV_ADDR  MK_STR(0xf7f00000)
 608 #define CONFIG_FDT1_ENV_ADDR    MK_STR(0xfffc0000)
 609 #define CONFIG_FDT2_ENV_ADDR    MK_STR(0xf7fc0000)
 610 #define CONFIG_OS1_ENV_ADDR     MK_STR(0xfef00000)
 611 #define CONFIG_OS2_ENV_ADDR     MK_STR(0xf6f00000)
 612
 613 #define CONFIG_PROG_UBOOT1                                              \
 614         "$download_cmd $loadaddr $ubootfile; "                          \
 615         "if test $? -eq 0; then "                                       \
 616                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 617                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 618                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 619                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 620                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 621                 "if test $? -ne 0; then "                               \
 622                         "echo PROGRAM FAILED; "                         \
 623                 "else; "                                                \
 624                         "echo PROGRAM SUCCEEDED; "                      \
 625                 "fi; "                                                  \
 626         "else; "                                                        \
 627                 "echo DOWNLOAD FAILED; "                                \
 628         "fi;"
 629
 630 #define CONFIG_PROG_UBOOT2                                              \
 631         "$download_cmd $loadaddr $ubootfile; "                          \
 632         "if test $? -eq 0; then "                                       \
 633                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 634                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 635                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 636                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 637                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 638                 "if test $? -ne 0; then "                               \
 639                         "echo PROGRAM FAILED; "                         \
 640                 "else; "                                                \
 641                         "echo PROGRAM SUCCEEDED; "                      \
 642                 "fi; "                                                  \
 643         "else; "                                                        \
 644                 "echo DOWNLOAD FAILED; "                                \
 645         "fi;"
 646
 647 #define CONFIG_BOOT_OS_NET                                              \
 648         "$download_cmd $osaddr $osfile; "                               \
 649         "if test $? -eq 0; then "                                       \
 650                 "if test -n $fdtaddr; then "                            \
 651                         "$download_cmd $fdtaddr $fdtfile; "             \
 652                         "if test $? -eq 0; then "                       \
 653                                 "bootm $osaddr - $fdtaddr; "            \
 654                         "else; "                                        \
 655                                 "echo FDT DOWNLOAD FAILED; "            \
 656                         "fi; "                                          \
 657                 "else; "                                                \
 658                         "bootm $osaddr; "                               \
 659                 "fi; "                                                  \
 660         "else; "                                                        \
 661                 "echo OS DOWNLOAD FAILED; "                             \
 662         "fi;"
 663
 664 #define CONFIG_PROG_OS1                                                 \
 665         "$download_cmd $osaddr $osfile; "                               \
 666         "if test $? -eq 0; then "                                       \
 667                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 668                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 669                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 670                 "if test $? -ne 0; then "                               \
 671                         "echo OS PROGRAM FAILED; "                      \
 672                 "else; "                                                \
 673                         "echo OS PROGRAM SUCCEEDED; "                   \
 674                 "fi; "                                                  \
 675         "else; "                                                        \
 676                 "echo OS DOWNLOAD FAILED; "                             \
 677         "fi;"
 678
 679 #define CONFIG_PROG_OS2                                                 \
 680         "$download_cmd $osaddr $osfile; "                               \
 681         "if test $? -eq 0; then "                                       \
 682                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 683                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 684                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 685                 "if test $? -ne 0; then "                               \
 686                         "echo OS PROGRAM FAILED; "                      \
 687                 "else; "                                                \
 688                         "echo OS PROGRAM SUCCEEDED; "                   \
 689                 "fi; "                                                  \
 690         "else; "                                                        \
 691                 "echo OS DOWNLOAD FAILED; "                             \
 692         "fi;"
 693
 694 #define CONFIG_PROG_FDT1                                                \
 695         "$download_cmd $fdtaddr $fdtfile; "                             \
 696         "if test $? -eq 0; then "                                       \
 697                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 698                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 699                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 700                 "if test $? -ne 0; then "                               \
 701                         "echo FDT PROGRAM FAILED; "                     \
 702                 "else; "                                                \
 703                         "echo FDT PROGRAM SUCCEEDED; "                  \
 704                 "fi; "                                                  \
 705         "else; "                                                        \
 706                 "echo FDT DOWNLOAD FAILED; "                            \
 707         "fi;"
 708
 709 #define CONFIG_PROG_FDT2                                                \
 710         "$download_cmd $fdtaddr $fdtfile; "                             \
 711         "if test $? -eq 0; then "                                       \
 712                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 713                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 714                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 715                 "if test $? -ne 0; then "                               \
 716                         "echo FDT PROGRAM FAILED; "                     \
 717                 "else; "                                                \
 718                         "echo FDT PROGRAM SUCCEEDED; "                  \
 719                 "fi; "                                                  \
 720         "else; "                                                        \
 721                 "echo FDT DOWNLOAD FAILED; "                            \
 722         "fi;"
 723
 724 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 725         "autoload=yes\0"                                                \
 726         "download_cmd=tftp\0"                                           \
 727         "console_args=console=ttyS0,115200\0"                           \
 728         "root_args=root=/dev/nfs rw\0"                                  \
 729         "misc_args=ip=on\0"                                             \
 730         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 731         "bootfile=/home/user/file\0"                                    \
 732         "osfile=/home/user/uImage-XPedite5170\0"                        \
 733         "fdtfile=/home/user/xpedite5170.dtb\0"                          \
 734         "ubootfile=/home/user/u-boot.bin\0"                             \
 735         "fdtaddr=c00000\0"                                              \
 736         "osaddr=0x1000000\0"                                            \
 737         "loadaddr=0x1000000\0"                                          \
 738         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 739         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 740         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 741         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 742         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 743         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 744         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 745         "bootcmd_flash1=run set_bootargs; "                             \
 746                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 747         "bootcmd_flash2=run set_bootargs; "                             \
 748                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 749         "bootcmd=run bootcmd_flash1\0"
 750 #endif  /* __CONFIG_H */