include/configs/UCP1020.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2019 Arcturus Networks, Inc.
   4  *           https://www.arcturusnetworks.com/products/ucp1020/
   5  * based on include/configs/p1_p2_rdb_pc.h
   6  * original copyright follows:
   7  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   8  */
   9
  10 /*
  11  * QorIQ uCP1020-xx boards configuration file
  12  */
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <linux/stringify.h>
  17
  18 /*** Arcturus FirmWare Environment */
  19
  20 #define MAX_SERIAL_SIZE 15
  21 #define MAX_HWADDR_SIZE 17
  22
  23 #define MAX_FWENV_ADDR  4
  24
  25 #define FWENV_MMC       1
  26 #define FWENV_SPI_FLASH 2
  27 #define FWENV_NOR_FLASH 3
  28 /*
  29  #define FWENV_TYPE    FWENV_MMC
  30  #define FWENV_TYPE    FWENV_SPI_FLASH
  31 */
  32 #define FWENV_TYPE      FWENV_NOR_FLASH
  33
  34 #if (FWENV_TYPE == FWENV_MMC)
  35 #define FWENV_ADDR1 -1
  36 #define FWENV_ADDR2 -1
  37 #define FWENV_ADDR3 -1
  38 #define FWENV_ADDR4 -1
  39 #define EMPY_CHAR 0
  40 #endif
  41
  42 #if (FWENV_TYPE == FWENV_SPI_FLASH)
  43 #ifndef CONFIG_SF_DEFAULT_SPEED
  44 #define CONFIG_SF_DEFAULT_SPEED 1000000
  45 #endif
  46 #ifndef CONFIG_SF_DEFAULT_MODE
  47 #define CONFIG_SF_DEFAULT_MODE  SPI_MODE0
  48 #endif
  49 #ifndef CONFIG_SF_DEFAULT_CS
  50 #define CONFIG_SF_DEFAULT_CS    0
  51 #endif
  52 #ifndef CONFIG_SF_DEFAULT_BUS
  53 #define CONFIG_SF_DEFAULT_BUS   0
  54 #endif
  55 #define FWENV_ADDR1 (0x200 - sizeof(smac))
  56 #define FWENV_ADDR2 (0x400 - sizeof(smac))
  57 #define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
  58 #define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
  59 #define EMPY_CHAR 0xff
  60 #endif
  61
  62 #if (FWENV_TYPE == FWENV_NOR_FLASH)
  63 #define FWENV_ADDR1 0xEC080000
  64 #define FWENV_ADDR2 -1
  65 #define FWENV_ADDR3 -1
  66 #define FWENV_ADDR4 -1
  67 #define EMPY_CHAR 0xff
  68 #endif
  69 /***********************************/
  70
  71 #define CONFIG_PCIE1    /* PCIE controller 1 (slot 1) */
  72 #define CONFIG_PCIE2    /* PCIE controller 2 (slot 2) */
  73 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
  74 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  75 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
  76
  77 #if defined(CONFIG_TARTGET_UCP1020T1)
  78
  79 #define CONFIG_UCP1020_REV_1_3
  80
  81 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
  82
  83 #define CONFIG_TSEC1
  84 #define CONFIG_TSEC3
  85 #define CONFIG_HAS_ETH0
  86 #define CONFIG_HAS_ETH1
  87 #define CONFIG_ETHADDR          00:19:D3:FF:FF:FF
  88 #define CONFIG_ETH1ADDR         00:19:D3:FF:FF:FE
  89 #define CONFIG_ETH2ADDR         00:19:D3:FF:FF:FD
  90 #define CONFIG_IPADDR           10.80.41.229
  91 #define CONFIG_SERVERIP         10.80.41.227
  92 #define CONFIG_NETMASK          255.255.252.0
  93 #define CONFIG_ETHPRIME         "eTSEC3"
  94
  95 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  96
  97 #endif
  98
  99 #if defined(CONFIG_TARGET_UCP1020)
 100
 101 #define CONFIG_UCP1020
 102 #define CONFIG_UCP1020_REV_1_3
 103
 104 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
 105
 106 #define CONFIG_TSEC1
 107 #define CONFIG_TSEC3
 108 #define CONFIG_HAS_ETH0
 109 #define CONFIG_HAS_ETH1
 110 #define CONFIG_HAS_ETH2
 111 #define CONFIG_ETHADDR          00:06:3B:FF:FF:FF
 112 #define CONFIG_ETH1ADDR         00:06:3B:FF:FF:FE
 113 #define CONFIG_ETH2ADDR         00:06:3B:FF:FF:FD
 114 #define CONFIG_IPADDR           192.168.1.81
 115 #define CONFIG_IPADDR1          192.168.1.82
 116 #define CONFIG_IPADDR2          192.168.1.83
 117 #define CONFIG_SERVERIP         192.168.1.80
 118 #define CONFIG_GATEWAYIP        102.168.1.1
 119 #define CONFIG_NETMASK          255.255.255.0
 120 #define CONFIG_ETHPRIME         "eTSEC1"
 121
 122 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 123
 124 #endif
 125
 126 #ifdef CONFIG_SDCARD
 127 #define CONFIG_RAMBOOT_SDCARD
 128 #define CONFIG_SYS_RAMBOOT
 129 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
 130 #endif
 131
 132 #ifdef CONFIG_SPIFLASH
 133 #define CONFIG_RAMBOOT_SPIFLASH
 134 #define CONFIG_SYS_RAMBOOT
 135 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
 136 #endif
 137
 138 #define CONFIG_SYS_TEXT_BASE_NOR        0xeff80000
 139
 140 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 141 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 142 #endif
 143
 144 #ifndef CONFIG_SYS_MONITOR_BASE
 145 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 146 #endif
 147
 148 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 149 #define CONFIG_LBA48
 150
 151 #define CONFIG_SYS_CLK_FREQ     66666666
 152
 153 #define CONFIG_HWCONFIG
 154
 155 /*
 156  * These can be toggled for performance analysis, otherwise use default.
 157  */
 158 #define CONFIG_L2_CACHE
 159 #define CONFIG_BTB
 160
 161 #define CONFIG_ENABLE_36BIT_PHYS
 162
 163 #define CONFIG_SYS_CCSRBAR              0xffe00000
 164 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 165
 166 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 167        SPL code*/
 168 #ifdef CONFIG_SPL_BUILD
 169 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 170 #endif
 171
 172 /* DDR Setup */
 173 #define CONFIG_SYS_SPD_BUS_NUM 1
 174
 175 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_512M
 176 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 177 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 178 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 179 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 180
 181 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 182
 183 /* Default settings for DDR3 */
 184 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 185 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 186 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 187 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 188 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 189 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 190
 191 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 192 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 193 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 194 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 195
 196 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 197 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 198 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 199 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 200 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 201 #define CONFIG_SYS_DDR_CONTROL          0xE70C0000      /* Type = DDR3 & ECC */
 202 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 203 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 204 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 205
 206 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 207 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 208 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 209 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 210 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 211 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 212 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 213 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 214
 215 /*
 216  * Memory map
 217  *
 218  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 219  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1G non-cacheable(PCIe * 2)
 220  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 221  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 256K cacheable
 222  *   (early boot only)
 223  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 224  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 225  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 226  */
 227
 228 /*
 229  * Local Bus Definitions
 230  */
 231 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 232 #define CONFIG_SYS_FLASH_BASE           0xec000000
 233
 234 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 235
 236 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 237         | BR_PS_16 | BR_V)
 238
 239 #define CONFIG_FLASH_OR_PRELIM          0xfc000ff7
 240
 241 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 242 #define CONFIG_SYS_FLASH_QUIET_TEST
 243 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 244
 245 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 246
 247 #undef CONFIG_SYS_FLASH_CHECKSUM
 248 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 249 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 250
 251 #define CONFIG_SYS_FLASH_EMPTY_INFO
 252
 253 #define CONFIG_SYS_INIT_RAM_LOCK
 254 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 255 /* Initial L1 address */
 256 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 257 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 258 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 259 /* Size of used area in RAM */
 260 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 261
 262 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 263                                         GENERATED_GBL_DATA_SIZE)
 264 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 265
 266 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)/* Reserve 256 kB for Mon */
 267 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 268
 269 #define CONFIG_SYS_PMC_BASE     0xff980000
 270 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 271 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 272                                         BR_PS_8 | BR_V)
 273 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 274                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 275                                  OR_GPCM_EAD)
 276
 277 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 278 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 279 #ifdef CONFIG_NAND_FSL_ELBC
 280 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 281 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 282 #endif
 283
 284 /* Serial Port - controlled on board with jumper J8
 285  * open - index 2
 286  * shorted - index 1
 287  */
 288 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 289 #define CONFIG_SYS_NS16550_SERIAL
 290 #define CONFIG_SYS_NS16550_REG_SIZE     1
 291 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 292 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 293 #define CONFIG_NS16550_MIN_FUNCTIONS
 294 #endif
 295
 296 #define CONFIG_SYS_BAUDRATE_TABLE       \
 297         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 298
 299 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 300 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 301
 302 /* I2C */
 303 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 304 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 305
 306 #define CONFIG_RTC_DS1337
 307 #define CONFIG_RTC_DS1337_NOOSC
 308 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 309 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 310 #define CONFIG_SYS_I2C_NCT72_ADDR       0x4C
 311 #define CONFIG_SYS_I2C_IDT6V49205B      0x69
 312
 313 #if defined(CONFIG_PCI)
 314 /*
 315  * General PCI
 316  * Memory space is mapped 1-1, but I/O space must start from 0.
 317  */
 318
 319 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 320 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT CON9"
 321 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 322 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 323 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 324 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 325 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 326 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 327 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 328 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 329
 330 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 331 #define CONFIG_SYS_PCIE1_NAME           "PCIe SLOT CON10"
 332 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 333 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 334 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 335 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 336 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 337 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 338 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 339 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 340
 341 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 342 #endif /* CONFIG_PCI */
 343
 344 /*
 345  * Environment
 346  */
 347 #if !defined(CONFIG_ENV_FIT_UCBOOT) && defined(CONFIG_RAMBOOT_SDCARD)
 348 #define CONFIG_FSL_FIXED_MMC_LOCATION
 349 #endif
 350
 351 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 352 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 353
 354 /*
 355  * USB
 356  */
 357 #define CONFIG_HAS_FSL_DR_USB
 358
 359 #if defined(CONFIG_HAS_FSL_DR_USB)
 360 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 361
 362 #ifdef CONFIG_USB_EHCI_HCD
 363 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 364 #define CONFIG_USB_EHCI_FSL
 365 #endif
 366 #endif
 367
 368 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 369
 370 #ifdef CONFIG_MMC
 371 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 372 #endif
 373
 374 /* Misc Extra Settings */
 375 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 376
 377 /*
 378  * Miscellaneous configurable options
 379  */
 380 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 381 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms tick */
 382
 383 /*
 384  * For booting Linux, the board info and command line data
 385  * have to be in the first 64 MB of memory, since this is
 386  * the maximum mapped by the Linux kernel during initialization.
 387  */
 388 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 389 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 390
 391 #if defined(CONFIG_CMD_KGDB)
 392 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 393 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 394 #endif
 395
 396 /*
 397  * Environment Configuration
 398  */
 399
 400 #if defined(CONFIG_TSEC_ENET)
 401
 402 #if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
 403 #else
 404 #error "UCP1020 module revision is not defined !!!"
 405 #endif
 406
 407 #define CONFIG_BOOTP_SERVERIP
 408
 409 #define CONFIG_TSEC1_NAME       "eTSEC1"
 410 #define CONFIG_TSEC2_NAME       "eTSEC2"
 411 #define CONFIG_TSEC3_NAME       "eTSEC3"
 412
 413 #define TSEC1_PHY_ADDR  4
 414 #define TSEC2_PHY_ADDR  0
 415 #define TSEC2_PHY_ADDR_SGMII    0x00
 416 #define TSEC3_PHY_ADDR  6
 417
 418 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 419 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 420 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 421
 422 #define TSEC1_PHYIDX    0
 423 #define TSEC2_PHYIDX    0
 424 #define TSEC3_PHYIDX    0
 425
 426 #endif
 427
 428 #define CONFIG_HOSTNAME         "UCP1020"
 429 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 430 #define CONFIG_BOOTFILE         "uImage"
 431 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 432
 433 /* default location for tftp and bootm */
 434 #define CONFIG_LOADADDR         1000000
 435
 436 #if defined(CONFIG_DONGLE)
 437
 438 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 439 "bootcmd=run prog_spi_mbrbootcramfs\0"                                  \
 440 "bootfile=uImage\0"                                                     \
 441 "consoledev=ttyS0\0"                                                    \
 442 "cramfsfile=image.cramfs\0"                                             \
 443 "dtbaddr=0x00c00000\0"                                                  \
 444 "dtbfile=image.dtb\0"                                                   \
 445 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 446 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 447 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 448 "fileaddr=0x01000000\0"                                                 \
 449 "filesize=0x00080000\0"                                                 \
 450 "flashmbr=sf probe 0; "                                                 \
 451         "tftp $loadaddr $mbr; "                                         \
 452         "sf erase $mbr_offset +$filesize; "                             \
 453         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 454 "flashrecovery=tftp $recoveryaddr $cramfsfile; "                        \
 455         "protect off $nor_recoveryaddr +$filesize; "                    \
 456         "erase $nor_recoveryaddr +$filesize; "                          \
 457         "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
 458         "protect on $nor_recoveryaddr +$filesize\0 "                    \
 459 "flashuboot=tftp $ubootaddr $ubootfile; "                               \
 460         "protect off $nor_ubootaddr +$filesize; "                       \
 461         "erase $nor_ubootaddr +$filesize; "                             \
 462         "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
 463         "protect on $nor_ubootaddr +$filesize\0 "                       \
 464 "flashworking=tftp $workingaddr $cramfsfile; "                          \
 465         "protect off $nor_workingaddr +$filesize; "                     \
 466         "erase $nor_workingaddr +$filesize; "                           \
 467         "cp.b $workingaddr $nor_workingaddr $filesize; "                \
 468         "protect on $nor_workingaddr +$filesize\0 "                     \
 469 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 470 "kerneladdr=0x01100000\0"                                               \
 471 "kernelfile=uImage\0"                                                   \
 472 "loadaddr=0x01000000\0"                                                 \
 473 "mbr=uCP1020d.mbr\0"                                                    \
 474 "mbr_offset=0x00000000\0"                                               \
 475 "mmbr=uCP1020Quiet.mbr\0"                                               \
 476 "mmcpart=0:2\0"                                                         \
 477 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                       \
 478         "mmc erase 1 1; "                                               \
 479         "mmc write $loadaddr 1 1\0"                                     \
 480 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "                \
 481         "mmc erase 0x40 0x400; "                                        \
 482         "mmc write $loadaddr 0x40 0x400\0"                              \
 483 "netdev=eth0\0"                                                         \
 484 "nor_recoveryaddr=0xEC0A0000\0"                                         \
 485 "nor_ubootaddr=0xEFF80000\0"                                            \
 486 "nor_workingaddr=0xECFA0000\0"                                          \
 487 "norbootrecovery=setenv bootargs $recoverybootargs"                     \
 488         " console=$consoledev,$baudrate $othbootargs; "                 \
 489         "run norloadrecovery; "                                         \
 490         "bootm $kerneladdr - $dtbaddr\0"                                \
 491 "norbootworking=setenv bootargs $workingbootargs"                       \
 492         " console=$consoledev,$baudrate $othbootargs; "                 \
 493         "run norloadworking; "                                          \
 494         "bootm $kerneladdr - $dtbaddr\0"                                \
 495 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                     \
 496         "setenv cramfsaddr $nor_recoveryaddr; "                         \
 497         "cramfsload $dtbaddr $dtbfile; "                                \
 498         "cramfsload $kerneladdr $kernelfile\0"                          \
 499 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                      \
 500         "setenv cramfsaddr $nor_workingaddr; "                          \
 501         "cramfsload $dtbaddr $dtbfile; "                                \
 502         "cramfsload $kerneladdr $kernelfile\0"                          \
 503 "prog_spi_mbr=run spi__mbr\0"                                           \
 504 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"       \
 505 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
 506         "run spi__cramfs\0"                                             \
 507 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 508         " console=$consoledev,$baudrate $othbootargs; "                 \
 509         "tftp $rootfsaddr $rootfsfile; "                                \
 510         "tftp $loadaddr $kernelfile; "                                  \
 511         "tftp $dtbaddr $dtbfile; "                                      \
 512         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 513 "ramdisk_size=120000\0"                                                 \
 514 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 515 "recoveryaddr=0x02F00000\0"                                             \
 516 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"           \
 517 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 518         "mw.l 0xffe0f008 0x00400000\0"                                  \
 519 "rootfsaddr=0x02F00000\0"                                               \
 520 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 521 "rootpath=/opt/nfsroot\0"                                               \
 522 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "                \
 523         "protect off 0xeC000000 +$filesize; "                           \
 524         "erase 0xEC000000 +$filesize; "                                 \
 525         "cp.b $loadaddr 0xEC000000 $filesize; "                         \
 526         "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
 527         "protect on 0xeC000000 +$filesize\0"                            \
 528 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "                \
 529         "protect off 0xeFF80000 +$filesize; "                           \
 530         "erase 0xEFF80000 +$filesize; "                                 \
 531         "cp.b $loadaddr 0xEFF80000 $filesize; "                         \
 532         "cmp.b $loadaddr 0xEFF80000 $filesize; "                        \
 533         "protect on 0xeFF80000 +$filesize\0"                            \
 534 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "                   \
 535         "sf probe 0; sf erase 0x8000 +$filesize; "                      \
 536         "sf write $loadaddr 0x8000 $filesize\0"                         \
 537 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "             \
 538         "protect off 0xec0a0000 +$filesize; "                           \
 539         "erase 0xeC0A0000 +$filesize; "                                 \
 540         "cp.b $loadaddr 0xeC0A0000 $filesize; "                         \
 541         "protect on 0xec0a0000 +$filesize\0"                            \
 542 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                       \
 543         "sf probe 1; sf erase 0 +$filesize; "                           \
 544         "sf write $loadaddr 0 $filesize\0"                              \
 545 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                       \
 546         "sf probe 0; sf erase 0 +$filesize; "                           \
 547         "sf write $loadaddr 0 $filesize\0"                              \
 548 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 549         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 550         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 551         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 552         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 553         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 554 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 555 "ubootaddr=0x01000000\0"                                                \
 556 "ubootfile=u-boot.bin\0"                                                \
 557 "ubootd=u-boot4dongle.bin\0"                                            \
 558 "upgrade=run flashworking\0"                                            \
 559 "usb_phy_type=ulpi\0 "                                                  \
 560 "workingaddr=0x02F00000\0"                                              \
 561 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
 562
 563 #else
 564
 565 #if defined(CONFIG_UCP1020T1)
 566
 567 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 568 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0"  \
 569 "bootfile=uImage\0"                                                     \
 570 "consoledev=ttyS0\0"                                                    \
 571 "cramfsfile=image.cramfs\0"                                             \
 572 "dtbaddr=0x00c00000\0"                                                  \
 573 "dtbfile=image.dtb\0"                                                   \
 574 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 575 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 576 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 577 "fileaddr=0x01000000\0"                                                 \
 578 "filesize=0x00080000\0"                                                 \
 579 "flashmbr=sf probe 0; "                                                 \
 580         "tftp $loadaddr $mbr; "                                         \
 581         "sf erase $mbr_offset +$filesize; "                             \
 582         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 583 "flashrecovery=tftp $recoveryaddr $cramfsfile; "                        \
 584         "protect off $nor_recoveryaddr +$filesize; "                    \
 585         "erase $nor_recoveryaddr +$filesize; "                          \
 586         "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
 587         "protect on $nor_recoveryaddr +$filesize\0 "                    \
 588 "flashuboot=tftp $ubootaddr $ubootfile; "                               \
 589         "protect off $nor_ubootaddr +$filesize; "                       \
 590         "erase $nor_ubootaddr +$filesize; "                             \
 591         "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
 592         "protect on $nor_ubootaddr +$filesize\0 "                       \
 593 "flashworking=tftp $workingaddr $cramfsfile; "                          \
 594         "protect off $nor_workingaddr +$filesize; "                     \
 595         "erase $nor_workingaddr +$filesize; "                           \
 596         "cp.b $workingaddr $nor_workingaddr $filesize; "                \
 597         "protect on $nor_workingaddr +$filesize\0 "                     \
 598 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 599 "kerneladdr=0x01100000\0"                                               \
 600 "kernelfile=uImage\0"                                                   \
 601 "loadaddr=0x01000000\0"                                                 \
 602 "mbr=uCP1020.mbr\0"                                                     \
 603 "mbr_offset=0x00000000\0"                                               \
 604 "netdev=eth0\0"                                                         \
 605 "nor_recoveryaddr=0xEC0A0000\0"                                         \
 606 "nor_ubootaddr=0xEFF80000\0"                                            \
 607 "nor_workingaddr=0xECFA0000\0"                                          \
 608 "norbootrecovery=setenv bootargs $recoverybootargs"                     \
 609         " console=$consoledev,$baudrate $othbootargs; "                 \
 610         "run norloadrecovery; "                                         \
 611         "bootm $kerneladdr - $dtbaddr\0"                                \
 612 "norbootworking=setenv bootargs $workingbootargs"                       \
 613         " console=$consoledev,$baudrate $othbootargs; "                 \
 614         "run norloadworking; "                                          \
 615         "bootm $kerneladdr - $dtbaddr\0"                                \
 616 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                     \
 617         "setenv cramfsaddr $nor_recoveryaddr; "                         \
 618         "cramfsload $dtbaddr $dtbfile; "                                \
 619         "cramfsload $kerneladdr $kernelfile\0"                          \
 620 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                      \
 621         "setenv cramfsaddr $nor_workingaddr; "                          \
 622         "cramfsload $dtbaddr $dtbfile; "                                \
 623         "cramfsload $kerneladdr $kernelfile\0"                          \
 624 "othbootargs=quiet\0"                                                   \
 625 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 626         " console=$consoledev,$baudrate $othbootargs; "                 \
 627         "tftp $rootfsaddr $rootfsfile; "                                \
 628         "tftp $loadaddr $kernelfile; "                                  \
 629         "tftp $dtbaddr $dtbfile; "                                      \
 630         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 631 "ramdisk_size=120000\0"                                                 \
 632 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 633 "recoveryaddr=0x02F00000\0"                                             \
 634 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"           \
 635 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 636         "mw.l 0xffe0f008 0x00400000\0"                                  \
 637 "rootfsaddr=0x02F00000\0"                                               \
 638 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 639 "rootpath=/opt/nfsroot\0"                                               \
 640 "silent=1\0"                                                            \
 641 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 642         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 643         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 644         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 645         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 646         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 647 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 648 "ubootaddr=0x01000000\0"                                                \
 649 "ubootfile=u-boot.bin\0"                                                \
 650 "upgrade=run flashworking\0"                                            \
 651 "workingaddr=0x02F00000\0"                                              \
 652 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
 653
 654 #else /* For Arcturus Modules */
 655
 656 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 657 "bootcmd=run norkernel\0"                                               \
 658 "bootfile=uImage\0"                                                     \
 659 "consoledev=ttyS0\0"                                                    \
 660 "dtbaddr=0x00c00000\0"                                                  \
 661 "dtbfile=image.dtb\0"                                                   \
 662 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 663 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 664 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 665 "fileaddr=0x01000000\0"                                                 \
 666 "filesize=0x00080000\0"                                                 \
 667 "flashmbr=sf probe 0; "                                                 \
 668         "tftp $loadaddr $mbr; "                                         \
 669         "sf erase $mbr_offset +$filesize; "                             \
 670         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 671 "flashuboot=tftp $loadaddr $ubootfile; "                                \
 672         "protect off $nor_ubootaddr0 +$filesize; "                      \
 673         "erase $nor_ubootaddr0 +$filesize; "                            \
 674         "cp.b $loadaddr $nor_ubootaddr0 $filesize; "                    \
 675         "protect on $nor_ubootaddr0 +$filesize; "                       \
 676         "protect off $nor_ubootaddr1 +$filesize; "                      \
 677         "erase $nor_ubootaddr1 +$filesize; "                            \
 678         "cp.b $loadaddr $nor_ubootaddr1 $filesize; "                    \
 679         "protect on $nor_ubootaddr1 +$filesize\0 "                      \
 680 "format0=protect off $part0base +$part0size; "                          \
 681         "erase $part0base +$part0size\0"                                \
 682 "format1=protect off $part1base +$part1size; "                          \
 683         "erase $part1base +$part1size\0"                                \
 684 "format2=protect off $part2base +$part2size; "                          \
 685         "erase $part2base +$part2size\0"                                \
 686 "format3=protect off $part3base +$part3size; "                          \
 687         "erase $part3base +$part3size\0"                                \
 688 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 689 "kerneladdr=0x01100000\0"                                               \
 690 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"                 \
 691 "kernelfile=uImage\0"                                                   \
 692 "loadaddr=0x01000000\0"                                                 \
 693 "mbr=uCP1020.mbr\0"                                                     \
 694 "mbr_offset=0x00000000\0"                                               \
 695 "netdev=eth0\0"                                                         \
 696 "nor_ubootaddr0=0xEC000000\0"                                           \
 697 "nor_ubootaddr1=0xEFF80000\0"                                           \
 698 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
 699         "run norkernelload; "                                           \
 700         "bootm $kerneladdr - $dtbaddr\0"                                \
 701 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "                       \
 702         "setenv cramfsaddr $part0base; "                                \
 703         "cramfsload $dtbaddr $dtbfile; "                                \
 704         "cramfsload $kerneladdr $kernelfile\0"                          \
 705 "part0base=0xEC100000\0"                                                \
 706 "part0size=0x00700000\0"                                                \
 707 "part1base=0xEC800000\0"                                                \
 708 "part1size=0x02000000\0"                                                \
 709 "part2base=0xEE800000\0"                                                \
 710 "part2size=0x00800000\0"                                                \
 711 "part3base=0xEF000000\0"                                                \
 712 "part3size=0x00F80000\0"                                                \
 713 "partENVbase=0xEC080000\0"                                              \
 714 "partENVsize=0x00080000\0"                                              \
 715 "program0=tftp part0-000000.bin; "                                      \
 716         "protect off $part0base +$filesize; "                           \
 717         "erase $part0base +$filesize; "                                 \
 718         "cp.b $loadaddr $part0base $filesize; "                         \
 719         "echo Verifying...; "                                           \
 720         "cmp.b $loadaddr $part0base $filesize\0"                        \
 721 "program1=tftp part1-000000.bin; "                                      \
 722         "protect off $part1base +$filesize; "                           \
 723         "erase $part1base +$filesize; "                                 \
 724         "cp.b $loadaddr $part1base $filesize; "                         \
 725         "echo Verifying...; "                                           \
 726         "cmp.b $loadaddr $part1base $filesize\0"                        \
 727 "program2=tftp part2-000000.bin; "                                      \
 728         "protect off $part2base +$filesize; "                           \
 729         "erase $part2base +$filesize; "                                 \
 730         "cp.b $loadaddr $part2base $filesize; "                         \
 731         "echo Verifying...; "                                           \
 732         "cmp.b $loadaddr $part2base $filesize\0"                        \
 733 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 734         "  console=$consoledev,$baudrate $othbootargs; "                \
 735         "tftp $rootfsaddr $rootfsfile; "                                \
 736         "tftp $loadaddr $kernelfile; "                                  \
 737         "tftp $dtbaddr $dtbfile; "                                      \
 738         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 739 "ramdisk_size=120000\0"                                                 \
 740 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 741 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 742         "mw.l 0xffe0f008 0x00400000\0"                                  \
 743 "rootfsaddr=0x02F00000\0"                                               \
 744 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 745 "rootpath=/opt/nfsroot\0"                                               \
 746 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                       \
 747         "sf probe 0; sf erase 0 +$filesize; "                           \
 748         "sf write $loadaddr 0 $filesize\0"                              \
 749 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "                 \
 750         "protect off 0xeC000000 +$filesize; "                           \
 751         "erase 0xEC000000 +$filesize; "                                 \
 752         "cp.b $loadaddr 0xEC000000 $filesize; "                         \
 753         "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
 754         "protect on 0xeC000000 +$filesize\0"                            \
 755 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 756         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 757         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 758         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 759         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 760         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 761 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 762 "ubootfile=u-boot.bin\0"                                                \
 763 "upgrade=run flashuboot\0"                                              \
 764 "usb_phy_type=ulpi\0 "                                                  \
 765 "boot_nfs= "                                                            \
 766         "setenv bootargs root=/dev/nfs rw "                             \
 767         "nfsroot=$serverip:$rootpath "                                  \
 768         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 769         "console=$consoledev,$baudrate $othbootargs;"                   \
 770         "tftp $loadaddr $bootfile;"                                     \
 771         "tftp $fdtaddr $fdtfile;"                                       \
 772         "bootm $loadaddr - $fdtaddr\0"                                  \
 773 "boot_hd = "                                                            \
 774         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "              \
 775         "console=$consoledev,$baudrate $othbootargs;"                   \
 776         "usb start;"                                                    \
 777         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"                   \
 778         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"                     \
 779         "bootm $loadaddr - $fdtaddr\0"                                  \
 780 "boot_usb_fat = "                                                       \
 781         "setenv bootargs root=/dev/ram rw "                             \
 782         "console=$consoledev,$baudrate $othbootargs "                   \
 783         "ramdisk_size=$ramdisk_size;"                                   \
 784         "usb start;"                                                    \
 785         "fatload usb 0:2 $loadaddr $bootfile;"                          \
 786         "fatload usb 0:2 $fdtaddr $fdtfile;"                            \
 787         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"                    \
 788         "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
 789 "boot_usb_ext2 = "                                                      \
 790         "setenv bootargs root=/dev/ram rw "                             \
 791         "console=$consoledev,$baudrate $othbootargs "                   \
 792         "ramdisk_size=$ramdisk_size;"                                   \
 793         "usb start;"                                                    \
 794         "ext2load usb 0:4 $loadaddr $bootfile;"                         \
 795         "ext2load usb 0:4 $fdtaddr $fdtfile;"                           \
 796         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"                   \
 797         "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
 798 "boot_nor = "                                                           \
 799         "setenv bootargs root=/dev/$jffs2nor rw "                       \
 800         "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
 801         "bootm $norbootaddr - $norfdtaddr\0 "                           \
 802 "boot_ram = "                                                           \
 803         "setenv bootargs root=/dev/ram rw "                             \
 804         "console=$consoledev,$baudrate $othbootargs "                   \
 805         "ramdisk_size=$ramdisk_size;"                                   \
 806         "tftp $ramdiskaddr $ramdiskfile;"                               \
 807         "tftp $loadaddr $bootfile;"                                     \
 808         "tftp $fdtaddr $fdtfile;"                                       \
 809         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
 810
 811 #endif
 812 #endif
 813
 814 #endif /* __CONFIG_H */