14e6c0f11f62a42f79c1f7a31000775b679ff3e7
[platform/kernel/u-boot.git] / include / configs / TQM834x.h
1 /*
2  * (C) Copyright 2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * TQM8349 board configuration file
26  */
27
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30
31 /*
32  * High Level Configuration Options
33  */
34 #define CONFIG_E300             1       /* E300 Family */
35 #define CONFIG_MPC83xx          1       /* MPC83xx family */
36 #define CONFIG_MPC834X          1       /* MPC834X specific */
37 #define CONFIG_MPC8349          1       /* MPC8349 specific */
38 #define CONFIG_TQM834X          1       /* TQM834X board specific */
39
40 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
41 #define CONFIG_SYS_IMMR         0xff400000
42
43 /* System clock. Primary input clock when in PCI host mode */
44 #define CONFIG_83XX_CLKIN       66666000        /* 66,666 MHz */
45
46 /*
47  * Local Bus LCRR
48  *    LCRR:  DLL bypass, Clock divider is 8
49  *
50  *    for CSB = 266 MHz it gives LCB clock frequency = 33 MHz
51  *
52  * External Local Bus rate is
53  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
54  */
55 #define CONFIG_SYS_LCRR         (LCRR_DBYP | LCRR_CLKDIV_8)
56
57 /* board pre init: do not call, nothing to do */
58 #undef CONFIG_BOARD_EARLY_INIT_F
59
60 /* detect the number of flash banks */
61 #define CONFIG_BOARD_EARLY_INIT_R
62
63 /*
64  * DDR Setup
65  */
66 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is system memory*/
67 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
68 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
69 #define DDR_CASLAT_25                           /* CASLAT set to 2.5 */
70 #undef CONFIG_DDR_ECC                           /* only for ECC DDR module */
71 #undef CONFIG_SPD_EEPROM                        /* do not use SPD EEPROM for DDR setup */
72
73 #undef CONFIG_SYS_DRAM_TEST                             /* memory test, takes time */
74 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
75 #define CONFIG_SYS_MEMTEST_END          0x00100000
76
77 /*
78  * FLASH on the Local Bus
79  */
80 #define CONFIG_SYS_FLASH_CFI                            /* use the Common Flash Interface */
81 #define CONFIG_FLASH_CFI_DRIVER                         /* use the CFI driver */
82 #undef CONFIG_SYS_FLASH_CHECKSUM
83 #define CONFIG_SYS_FLASH_BASE           0x80000000      /* start of FLASH   */
84 #define CONFIG_SYS_FLASH_SIZE           8               /* FLASH size in MB */
85 #define CONFIG_SYS_FLASH_EMPTY_INFO                     /* print 'E' for empty sectors */
86 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
87
88 /*
89  * FLASH bank number detection
90  */
91
92 /*
93  * When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash
94  * banks has to be determined at runtime and stored in a gloabl variable
95  * tqm834x_num_flash_banks. The value of CONFIG_SYS_MAX_FLASH_BANKS_DETECT is only
96  * used instead of CONFIG_SYS_MAX_FLASH_BANKS to allocate the array flash_info, and
97  * should be made sufficiently large to accomodate the number of banks that
98  * might actually be detected.  Since most (all?) Flash related functions use
99  * CONFIG_SYS_MAX_FLASH_BANKS as the number of actual banks on the board, it is
100  * defined as tqm834x_num_flash_banks.
101  */
102 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       2
103 #ifndef __ASSEMBLY__
104 extern int tqm834x_num_flash_banks;
105 #endif
106 #define CONFIG_SYS_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
107
108 #define CONFIG_SYS_MAX_FLASH_SECT               512     /* max sectors per device */
109
110 /* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */
111 #define CONFIG_SYS_BR0_PRELIM           ((CONFIG_SYS_FLASH_BASE & BR_BA) | \
112                                         BR_MS_GPCM | BR_PS_32 | BR_V)
113
114 /* FLASH timing (0x0000_0c54) */
115 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \
116                                         OR_GPCM_SCY_5 | OR_GPCM_TRLX)
117
118 #define CONFIG_SYS_PRELIM_OR_AM 0xc0000000      /* OR addr mask: 1 GiB */
119
120 #define CONFIG_SYS_OR0_PRELIM           (CONFIG_SYS_PRELIM_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
121
122 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001D      /* 1 GiB window size (2^(size + 1)) */
123
124 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE   /* Window base at flash base */
125
126 /* disable remaining mappings */
127 #define CONFIG_SYS_BR1_PRELIM           0x00000000
128 #define CONFIG_SYS_OR1_PRELIM           0x00000000
129 #define CONFIG_SYS_LBLAWBAR1_PRELIM     0x00000000
130 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x00000000
131
132 #define CONFIG_SYS_BR2_PRELIM           0x00000000
133 #define CONFIG_SYS_OR2_PRELIM           0x00000000
134 #define CONFIG_SYS_LBLAWBAR2_PRELIM     0x00000000
135 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x00000000
136
137 #define CONFIG_SYS_BR3_PRELIM           0x00000000
138 #define CONFIG_SYS_OR3_PRELIM           0x00000000
139 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0x00000000
140 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x00000000
141
142 /*
143  * Monitor config
144  */
145 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
146
147 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
148 # define CONFIG_SYS_RAMBOOT
149 #else
150 # undef  CONFIG_SYS_RAMBOOT
151 #endif
152
153 #define CONFIG_SYS_INIT_RAM_LOCK        1
154 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000      /* Initial RAM address */
155 #define CONFIG_SYS_INIT_RAM_END 0x1000          /* End of used area in RAM*/
156
157 #define CONFIG_SYS_GBL_DATA_SIZE        0x100           /* num bytes initial data */
158 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
159 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
160
161 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kB = 3 sect. for Mon */
162 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024) /* Reserve 512 kB for malloc */
163
164 /*
165  * Serial Port
166  */
167 #define CONFIG_CONS_INDEX       1
168 #undef CONFIG_SERIAL_SOFTWARE_FIFO
169 #define CONFIG_SYS_NS16550
170 #define CONFIG_SYS_NS16550_SERIAL
171 #define CONFIG_SYS_NS16550_REG_SIZE     1
172 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
173
174 #define CONFIG_SYS_BAUDRATE_TABLE  \
175         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
176
177 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
178 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
179
180 /*
181  * I2C
182  */
183 #define CONFIG_HARD_I2C                         /* I2C with hardware support    */
184 #undef CONFIG_SOFT_I2C                          /* I2C bit-banged               */
185 #define CONFIG_FSL_I2C
186 #define CONFIG_SYS_I2C_SPEED                    400000  /* I2C speed: 400KHz            */
187 #define CONFIG_SYS_I2C_SLAVE                    0x7F    /* slave address                */
188 #define CONFIG_SYS_I2C_OFFSET                   0x3000
189
190 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
191 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x                     */
192 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2       /* 16 bit                       */
193 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* 32 bytes per write           */
194 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   12      /* 10ms +/- 20%                 */
195 #define CONFIG_SYS_I2C_MULTI_EEPROMS            1       /* more than one eeprom         */
196
197 /* I2C RTC */
198 #define CONFIG_RTC_DS1337                       /* use ds1337 rtc via i2c       */
199 #define CONFIG_SYS_I2C_RTC_ADDR         0x68    /* at address 0x68              */
200
201 /* I2C SYSMON (LM75) */
202 #define CONFIG_DTT_LM75                 1       /* ON Semi's LM75               */
203 #define CONFIG_DTT_SENSORS              {0}     /* Sensor addresses             */
204 #define CONFIG_SYS_DTT_MAX_TEMP         70
205 #define CONFIG_SYS_DTT_LOW_TEMP         -30
206 #define CONFIG_SYS_DTT_HYSTERESIS               3
207
208 /*
209  * TSEC
210  */
211 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
212 #define CONFIG_MII
213
214 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
215 #define CONFIG_SYS_TSEC1                (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
216 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
217 #define CONFIG_SYS_TSEC2                (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
218
219 #if defined(CONFIG_TSEC_ENET)
220
221 #ifndef CONFIG_NET_MULTI
222 #define CONFIG_NET_MULTI
223 #endif
224
225 #define CONFIG_TSEC1            1
226 #define CONFIG_TSEC1_NAME       "TSEC0"
227 #define CONFIG_TSEC2            1
228 #define CONFIG_TSEC2_NAME       "TSEC1"
229 #define TSEC1_PHY_ADDR                  2
230 #define TSEC2_PHY_ADDR                  1
231 #define TSEC1_PHYIDX                    0
232 #define TSEC2_PHYIDX                    0
233 #define TSEC1_FLAGS             TSEC_GIGABIT
234 #define TSEC2_FLAGS             TSEC_GIGABIT
235
236 /* Options are: TSEC[0-1] */
237 #define CONFIG_ETHPRIME                 "TSEC0"
238
239 #endif  /* CONFIG_TSEC_ENET */
240
241 /*
242  * General PCI
243  * Addresses are mapped 1-1.
244  */
245 #define CONFIG_PCI
246
247 #if defined(CONFIG_PCI)
248
249 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
250 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
251
252 /* PCI1 host bridge */
253 #define CONFIG_SYS_PCI1_MEM_BASE       0xc0000000
254 #define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
255 #define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
256 #define CONFIG_SYS_PCI1_IO_BASE        0xe2000000
257 #define CONFIG_SYS_PCI1_IO_PHYS        CONFIG_SYS_PCI1_IO_BASE
258 #define CONFIG_SYS_PCI1_IO_SIZE        0x1000000       /* 16M */
259
260 #undef CONFIG_EEPRO100
261 #define CONFIG_EEPRO100
262 #undef CONFIG_TULIP
263
264 #if !defined(CONFIG_PCI_PNP)
265         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BASE
266         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_MEM_BASE
267         #define PCI_IDSEL_NUMBER        0x1c    /* slot0 (IDSEL) = 28 */
268 #endif
269
270 #define CONFIG_SYS_PCI_SUBSYS_VENDORID          0x1957  /* Freescale */
271
272 #endif  /* CONFIG_PCI */
273
274 /*
275  * Environment
276  */
277 #define CONFIG_ENV_IS_IN_FLASH          1
278 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
279 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) for env */
280 #define CONFIG_ENV_SIZE                 0x8000  /*  32K max size */
281 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
282 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
283
284 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
285 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
286
287 /*
288  * BOOTP options
289  */
290 #define CONFIG_BOOTP_BOOTFILESIZE
291 #define CONFIG_BOOTP_BOOTPATH
292 #define CONFIG_BOOTP_GATEWAY
293 #define CONFIG_BOOTP_HOSTNAME
294
295
296 /*
297  * Command line configuration.
298  */
299 #include <config_cmd_default.h>
300
301 #define CONFIG_CMD_ASKENV
302 #define CONFIG_CMD_DATE
303 #define CONFIG_CMD_DHCP
304 #define CONFIG_CMD_DTT
305 #define CONFIG_CMD_EEPROM
306 #define CONFIG_CMD_I2C
307 #define CONFIG_CMD_NFS
308 #define CONFIG_CMD_JFFS2
309 #define CONFIG_CMD_MII
310 #define CONFIG_CMD_PING
311 #define CONFIG_CMD_REGINFO
312 #define CONFIG_CMD_SNTP
313
314 #if defined(CONFIG_PCI)
315     #define CONFIG_CMD_PCI
316 #endif
317
318 #if defined(CONFIG_SYS_RAMBOOT)
319     #undef CONFIG_CMD_SAVEENV
320     #undef CONFIG_CMD_LOADS
321 #endif
322
323 /*
324  * Miscellaneous configurable options
325  */
326 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
327 #define CONFIG_SYS_LOAD_ADDR            0x2000000       /* default load address */
328 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt */
329
330 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
331 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser          */
332 #ifdef  CONFIG_SYS_HUSH_PARSER
333 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
334 #endif
335
336 #if defined(CONFIG_CMD_KGDB)
337         #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
338 #else
339         #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
340 #endif
341
342 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
343 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
344 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
345 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1ms ticks */
346
347 #undef CONFIG_WATCHDOG                          /* watchdog disabled */
348
349 /* pass open firmware flat tree */
350 #define CONFIG_OF_LIBFDT        1
351 #define CONFIG_OF_BOARD_SETUP   1
352 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
353
354 /*
355  * For booting Linux, the board info and command line data
356  * have to be in the first 8 MB of memory, since this is
357  * the maximum mapped by the Linux kernel during initialization.
358  */
359 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
360
361 #define CONFIG_SYS_HRCW_LOW (\
362         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
363         HRCWL_DDR_TO_SCB_CLK_1X1 |\
364         HRCWL_CSB_TO_CLKIN_4X1 |\
365         HRCWL_VCO_1X2 |\
366         HRCWL_CORE_TO_CSB_2X1)
367
368 #if defined(PCI_64BIT)
369 #define CONFIG_SYS_HRCW_HIGH (\
370         HRCWH_PCI_HOST |\
371         HRCWH_64_BIT_PCI |\
372         HRCWH_PCI1_ARBITER_ENABLE |\
373         HRCWH_PCI2_ARBITER_DISABLE |\
374         HRCWH_CORE_ENABLE |\
375         HRCWH_FROM_0X00000100 |\
376         HRCWH_BOOTSEQ_DISABLE |\
377         HRCWH_SW_WATCHDOG_DISABLE |\
378         HRCWH_ROM_LOC_LOCAL_16BIT |\
379         HRCWH_TSEC1M_IN_GMII |\
380         HRCWH_TSEC2M_IN_GMII )
381 #else
382 #define CONFIG_SYS_HRCW_HIGH (\
383         HRCWH_PCI_HOST |\
384         HRCWH_32_BIT_PCI |\
385         HRCWH_PCI1_ARBITER_ENABLE |\
386         HRCWH_PCI2_ARBITER_DISABLE |\
387         HRCWH_CORE_ENABLE |\
388         HRCWH_FROM_0X00000100 |\
389         HRCWH_BOOTSEQ_DISABLE |\
390         HRCWH_SW_WATCHDOG_DISABLE |\
391         HRCWH_ROM_LOC_LOCAL_16BIT |\
392         HRCWH_TSEC1M_IN_GMII |\
393         HRCWH_TSEC2M_IN_GMII )
394 #endif
395
396 /* System IO Config */
397 #define CONFIG_SYS_SICRH        0
398 #define CONFIG_SYS_SICRL        SICRL_LDP_A
399
400 /* i-cache and d-cache disabled */
401 #define CONFIG_SYS_HID0_INIT    0x000000000
402 #define CONFIG_SYS_HID0_FINAL   CONFIG_SYS_HID0_INIT
403 #define CONFIG_SYS_HID2 HID2_HBE
404
405 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
406
407 /* DDR 0 - 512M */
408 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
409 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
410 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
411 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
412
413 /* stack in DCACHE @ 512M (no backing mem) */
414 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
415 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
416
417 /* PCI */
418 #ifdef CONFIG_PCI
419 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
420 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
421 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
422 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
423 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
424 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
425 #else
426 #define CONFIG_SYS_IBAT3L       (0)
427 #define CONFIG_SYS_IBAT3U       (0)
428 #define CONFIG_SYS_IBAT4L       (0)
429 #define CONFIG_SYS_IBAT4U       (0)
430 #define CONFIG_SYS_IBAT5L       (0)
431 #define CONFIG_SYS_IBAT5U       (0)
432 #endif
433
434 /* IMMRBAR */
435 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
436 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
437
438 /* FLASH */
439 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
440 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
441
442 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
443 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
444 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
445 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
446 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
447 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
448 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
449 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
450 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
451 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
452 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
453 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
454 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
455 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
456 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
457 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
458
459 /*
460  * Internal Definitions
461  *
462  * Boot Flags
463  */
464 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
465 #define BOOTFLAG_WARM           0x02    /* Software reboot */
466
467 #if defined(CONFIG_CMD_KGDB)
468 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
469 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
470 #endif
471
472 /*
473  * Environment Configuration
474  */
475
476 #define CONFIG_LOADADDR         400000  /* default location for tftp and bootm */
477
478 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
479 #undef  CONFIG_BOOTARGS                 /* the boot command will set bootargs */
480
481 #define CONFIG_BAUDRATE         115200
482
483 #define CONFIG_PREBOOT  "echo;" \
484         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
485         "echo"
486
487 #undef  CONFIG_BOOTARGS
488
489 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
490         "netdev=eth0\0"                                                 \
491         "hostname=tqm834x\0"                                            \
492         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
493                 "nfsroot=${serverip}:${rootpath}\0"                     \
494         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
495         "addip=setenv bootargs ${bootargs} "                            \
496                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
497                 ":${hostname}:${netdev}:off panic=1\0"                  \
498         "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
499         "flash_nfs_old=run nfsargs addip addcons;"                      \
500                 "bootm ${kernel_addr}\0"                                \
501         "flash_nfs=run nfsargs addip addcons;"                          \
502                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
503         "flash_self_old=run ramargs addip addcons;"                     \
504                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
505         "flash_self=run ramargs addip addcons;"                         \
506                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
507         "net_nfs_old=tftp 400000 ${bootfile};"                          \
508                 "run nfsargs addip addcons;bootm\0"                     \
509         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
510                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
511                 "run nfsargs addip addcons; "                           \
512                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
513         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
514         "bootfile=tqm834x/uImage\0"                                     \
515         "fdtfile=tqm834x/tqm834x.dtb\0"                                 \
516         "kernel_addr_r=400000\0"                                        \
517         "fdt_addr_r=600000\0"                                           \
518         "ramdisk_addr_r=800000\0"                                       \
519         "kernel_addr=800C0000\0"                                        \
520         "fdt_addr=800A0000\0"                                           \
521         "ramdisk_addr=80300000\0"                                       \
522         "u-boot=tqm834x/u-boot.bin\0"                                   \
523         "load=tftp 200000 ${u-boot}\0"                                  \
524         "update=protect off 80000000 +${filesize};"                     \
525                 "era 80000000 +${filesize};"                            \
526                 "cp.b 200000 80000000 ${filesize}\0"                    \
527         "upd=run load update\0"                                         \
528         ""
529
530 #define CONFIG_BOOTCOMMAND      "run flash_self"
531
532 /*
533  * JFFS2 partitions
534  */
535 /* mtdparts command line support */
536 #define CONFIG_CMD_MTDPARTS
537 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
538 #define CONFIG_FLASH_CFI_MTD
539 #define MTDIDS_DEFAULT          "nor0=TQM834x-0"
540
541 /* default mtd partition table */
542 #define MTDPARTS_DEFAULT        "mtdparts=TQM834x-0:256k(u-boot),256k(env),"\
543                                                 "1m(kernel),2m(initrd),"\
544                                                 "-(user);"\
545
546 #endif  /* __CONFIG_H */