include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_PCIE4
  16
  17 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20 #ifndef CONFIG_SDCARD
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #else
  24 #define RESET_VECTOR_OFFSET             0x27FFC
  25 #define BOOT_PAGE_OFFSET                0x27000
  26
  27 #ifdef  CONFIG_SDCARD
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  29 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  30 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  31 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  32 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  33 #endif
  34
  35 #endif
  36 #endif /* CONFIG_RAMBOOT_PBL */
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  40
  41 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  42 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  43 #endif
  44
  45 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  46 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  47 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  48 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  49 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  50
  51 /*
  52  * These can be toggled for performance analysis, otherwise use default.
  53  */
  54 #define CONFIG_SYS_CACHE_STASHING
  55 #ifdef CONFIG_DDR_ECC
  56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  57 #endif
  58
  59 /*
  60  *  Config the L3 Cache as L3 SRAM
  61  */
  62 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  63 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  64 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  65
  66 #define CONFIG_SYS_DCSRBAR              0xf0000000
  67 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  68
  69 /*
  70  * DDR Setup
  71  */
  72 #define CONFIG_VERY_BIG_RAM
  73 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  74 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  75
  76 /*
  77  * IFC Definitions
  78  */
  79 #define CONFIG_SYS_FLASH_BASE   0xe0000000
  80 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
  81
  82 #define CONFIG_HWCONFIG
  83
  84 /* define to use L1 as initial stack */
  85 #define CONFIG_L1_INIT_RAM
  86 #define CONFIG_SYS_INIT_RAM_LOCK
  87 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
  88 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
  89 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
  90 /* The assembler doesn't like typecast */
  91 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  92         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  93           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  94 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
  95
  96 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  97
  98 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
  99
 100 /* Serial Port - controlled on board with jumper J8
 101  * open - index 2
 102  * shorted - index 1
 103  */
 104 #define CONFIG_SYS_NS16550_SERIAL
 105 #define CONFIG_SYS_NS16550_REG_SIZE     1
 106 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 107
 108 #define CONFIG_SYS_BAUDRATE_TABLE       \
 109         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 110
 111 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 112 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 113 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 114 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 115
 116 /* I2C */
 117
 118 /*
 119  * General PCI
 120  * Memory space is mapped 1-1, but I/O space must start from 0.
 121  */
 122
 123 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 124 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 125 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 126 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 127 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 128
 129 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 130 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 131 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 132 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 133 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 134
 135 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 136 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 137 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 138 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 139 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 140
 141 /* controller 4, Base address 203000 */
 142 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 143 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 144 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 145
 146 #ifdef CONFIG_PCI
 147 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 148 #endif  /* CONFIG_PCI */
 149
 150 /*
 151  * Environment
 152  */
 153 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 154 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 155
 156 /*
 157  * Miscellaneous configurable options
 158  */
 159
 160 /*
 161  * For booting Linux, the board info and command line data
 162  * have to be in the first 64 MB of memory, since this is
 163  * the maximum mapped by the Linux kernel during initialization.
 164  */
 165 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 166 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 167
 168 /*
 169  * Environment Configuration
 170  */
 171 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 172 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 173
 174 #define HVBOOT                                  \
 175         "setenv bootargs config-addr=0x60000000; "      \
 176         "bootm 0x01000000 - 0x00f00000"
 177
 178 /*
 179  * DDR Setup
 180  */
 181 #define CONFIG_SYS_SPD_BUS_NUM  0
 182 #define SPD_EEPROM_ADDRESS1     0x52
 183 #define SPD_EEPROM_ADDRESS2     0x54
 184 #define SPD_EEPROM_ADDRESS3     0x56
 185 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 186 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 187
 188 /*
 189  * IFC Definitions
 190  */
 191 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 192 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 193                                 + 0x8000000) | \
 194                                 CSPR_PORT_SIZE_16 | \
 195                                 CSPR_MSEL_NOR | \
 196                                 CSPR_V)
 197 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 198 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 199                                 CSPR_PORT_SIZE_16 | \
 200                                 CSPR_MSEL_NOR | \
 201                                 CSPR_V)
 202 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 203 /* NOR Flash Timing Params */
 204 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 205
 206 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 207                                 FTIM0_NOR_TEADC(0x5) | \
 208                                 FTIM0_NOR_TEAHC(0x5))
 209 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 210                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 211                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 212 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 213                                 FTIM2_NOR_TCH(0x4) | \
 214                                 FTIM2_NOR_TWPH(0x0E) | \
 215                                 FTIM2_NOR_TWP(0x1c))
 216 #define CONFIG_SYS_NOR_FTIM3    0x0
 217
 218 #define CONFIG_SYS_FLASH_QUIET_TEST
 219 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 220
 221 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 222 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 223 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 224
 225 #define CONFIG_SYS_FLASH_EMPTY_INFO
 226 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 227                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 228
 229 /* NAND Flash on IFC */
 230 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 231 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 232 #define CONFIG_SYS_NAND_BASE            0xff800000
 233 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 234
 235 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 236 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 237                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 238                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 239                                 | CSPR_V)
 240 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 241
 242 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 243                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 244                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 245                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 246                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 247                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 248                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 249
 250 /* ONFI NAND Flash mode0 Timing Params */
 251 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 252                                         FTIM0_NAND_TWP(0x18)   | \
 253                                         FTIM0_NAND_TWCHT(0x07) | \
 254                                         FTIM0_NAND_TWH(0x0a))
 255 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 256                                         FTIM1_NAND_TWBE(0x39)  | \
 257                                         FTIM1_NAND_TRR(0x0e)   | \
 258                                         FTIM1_NAND_TRP(0x18))
 259 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 260                                         FTIM2_NAND_TREH(0x0a) | \
 261                                         FTIM2_NAND_TWHRE(0x1e))
 262 #define CONFIG_SYS_NAND_FTIM3           0x0
 263
 264 #define CONFIG_SYS_NAND_DDR_LAW         11
 265 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 266 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 267
 268 #if defined(CONFIG_MTD_RAW_NAND)
 269 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 270 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 271 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 272 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 273 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 274 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 275 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 276 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 277 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 278 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 279 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 280 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 281 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 282 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 283 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 284 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 285 #else
 286 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 287 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 288 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 289 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 290 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 291 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 292 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 293 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 294 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 295 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 296 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 297 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 298 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 299 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 300 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 301 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 302 #endif
 303 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 304 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 305 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 306 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 307 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 308 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 309 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 310 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 311
 312 /* CPLD on IFC */
 313 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 314 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 315 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 316 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 317                                 | CSPR_PORT_SIZE_8 \
 318                                 | CSPR_MSEL_GPCM \
 319                                 | CSPR_V)
 320
 321 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 322 #define CONFIG_SYS_CSOR3        0x0
 323
 324 /* CPLD Timing parameters for IFC CS3 */
 325 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 326                                         FTIM0_GPCM_TEADC(0x0e) | \
 327                                         FTIM0_GPCM_TEAHC(0x0e))
 328 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 329                                         FTIM1_GPCM_TRAD(0x1f))
 330 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 331                                         FTIM2_GPCM_TCH(0x8) | \
 332                                         FTIM2_GPCM_TWP(0x1f))
 333 #define CONFIG_SYS_CS3_FTIM3            0x0
 334
 335 #if defined(CONFIG_RAMBOOT_PBL)
 336 #define CONFIG_SYS_RAMBOOT
 337 #endif
 338
 339 /* I2C */
 340 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 341 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 342
 343 #define I2C_MUX_CH_DEFAULT      0x8
 344 #define I2C_MUX_CH_VOL_MONITOR  0xa
 345 #define I2C_MUX_CH_VSC3316_FS   0xc
 346 #define I2C_MUX_CH_VSC3316_BS   0xd
 347
 348 /* Voltage monitor on channel 2*/
 349 #define I2C_VOL_MONITOR_ADDR            0x40
 350 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 351 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 352 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 353
 354 /* The lowest and highest voltage allowed for T4240RDB */
 355 #define VDD_MV_MIN                      819
 356 #define VDD_MV_MAX                      1212
 357
 358 /*
 359  * eSPI - Enhanced SPI
 360  */
 361
 362 /* Qman/Bman */
 363 #ifndef CONFIG_NOBQFMAN
 364 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 365 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 366 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 367 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 368 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 369 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 370 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 371 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 372 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 373                                         CONFIG_SYS_BMAN_CENA_SIZE)
 374 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 375 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 376 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 377 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 378 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 379 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 380 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 381 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 382 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 383 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 384 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 385                                         CONFIG_SYS_QMAN_CENA_SIZE)
 386 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 387 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 388
 389 #define CONFIG_SYS_DPAA_FMAN
 390 #define CONFIG_SYS_DPAA_PME
 391 #define CONFIG_SYS_PMAN
 392 #define CONFIG_SYS_DPAA_DCE
 393 #define CONFIG_SYS_DPAA_RMAN
 394 #define CONFIG_SYS_INTERLAKEN
 395
 396 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 397 #endif /* CONFIG_NOBQFMAN */
 398
 399 #ifdef CONFIG_SYS_DPAA_FMAN
 400 #define SGMII_PHY_ADDR1 0x0
 401 #define SGMII_PHY_ADDR2 0x1
 402 #define SGMII_PHY_ADDR3 0x2
 403 #define SGMII_PHY_ADDR4 0x3
 404 #define SGMII_PHY_ADDR5 0x4
 405 #define SGMII_PHY_ADDR6 0x5
 406 #define SGMII_PHY_ADDR7 0x6
 407 #define SGMII_PHY_ADDR8 0x7
 408 #define FM1_10GEC1_PHY_ADDR     0x10
 409 #define FM1_10GEC2_PHY_ADDR     0x11
 410 #define FM2_10GEC1_PHY_ADDR     0x12
 411 #define FM2_10GEC2_PHY_ADDR     0x13
 412 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 413 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 414 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 415 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 416 #endif
 417
 418 /*
 419 * USB
 420 */
 421
 422 #ifdef CONFIG_MMC
 423 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 424 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 425 #endif
 426
 427
 428 #define __USB_PHY_TYPE  utmi
 429
 430 /*
 431  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 432  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 433  * interleaving. It can be cacheline, page, bank, superbank.
 434  * See doc/README.fsl-ddr for details.
 435  */
 436 #ifdef CONFIG_ARCH_T4240
 437 #define CTRL_INTLV_PREFERED 3way_4KB
 438 #else
 439 #define CTRL_INTLV_PREFERED cacheline
 440 #endif
 441
 442 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 443         "hwconfig=fsl_ddr:"                                     \
 444         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 445         "bank_intlv=auto;"                                      \
 446         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 447         "netdev=eth0\0"                                         \
 448         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 449         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 450         "tftpflash=tftpboot $loadaddr $uboot && "               \
 451         "protect off $ubootaddr +$filesize && "                 \
 452         "erase $ubootaddr +$filesize && "                       \
 453         "cp.b $loadaddr $ubootaddr $filesize && "               \
 454         "protect on $ubootaddr +$filesize && "                  \
 455         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 456         "consoledev=ttyS0\0"                                    \
 457         "ramdiskaddr=2000000\0"                                 \
 458         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 459         "fdtaddr=1e00000\0"                                     \
 460         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 461         "bdev=sda3\0"
 462
 463 #define HVBOOT                                  \
 464         "setenv bootargs config-addr=0x60000000; "      \
 465         "bootm 0x01000000 - 0x00f00000"
 466
 467 #include <asm/fsl_secure_boot.h>
 468
 469 #endif  /* __CONFIG_H */