include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifndef CONFIG_SDCARD
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #else
  22 #define RESET_VECTOR_OFFSET             0x27FFC
  23 #define BOOT_PAGE_OFFSET                0x27000
  24
  25 #ifdef  CONFIG_SDCARD
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  27 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  28 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  29 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  30 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  31 #endif
  32
  33 #endif
  34 #endif /* CONFIG_RAMBOOT_PBL */
  35
  36 /* High Level Configuration Options */
  37
  38 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  39 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  40 #endif
  41
  42 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  43
  44 /*
  45  * These can be toggled for performance analysis, otherwise use default.
  46  */
  47 #ifdef CONFIG_DDR_ECC
  48 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  49 #endif
  50
  51 /*
  52  *  Config the L3 Cache as L3 SRAM
  53  */
  54 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  55 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  56
  57 #define CONFIG_SYS_DCSRBAR              0xf0000000
  58 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  59
  60 /*
  61  * DDR Setup
  62  */
  63 #define CONFIG_VERY_BIG_RAM
  64 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  65 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  66
  67 /*
  68  * IFC Definitions
  69  */
  70 #define CONFIG_SYS_FLASH_BASE   0xe0000000
  71 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
  72
  73 #define CONFIG_HWCONFIG
  74
  75 /* define to use L1 as initial stack */
  76 #define CONFIG_L1_INIT_RAM
  77 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
  78 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
  79 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
  80 /* The assembler doesn't like typecast */
  81 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  82         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  83           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  84 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
  85
  86 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  87
  88 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
  89
  90 /* Serial Port - controlled on board with jumper J8
  91  * open - index 2
  92  * shorted - index 1
  93  */
  94 #define CONFIG_SYS_NS16550_SERIAL
  95 #define CONFIG_SYS_NS16550_REG_SIZE     1
  96 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
  97
  98 #define CONFIG_SYS_BAUDRATE_TABLE       \
  99         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 100
 101 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 102 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 103 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 104 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 105
 106 /* I2C */
 107
 108 /*
 109  * General PCI
 110  * Memory space is mapped 1-1, but I/O space must start from 0.
 111  */
 112
 113 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 114 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 115 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 116 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 117 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 118
 119 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 120 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 121 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 122 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 123 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 124
 125 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 126 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 127 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 128 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 129 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 130
 131 /* controller 4, Base address 203000 */
 132 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 133 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 134 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 135
 136 /*
 137  * Environment
 138  */
 139 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 140 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 141
 142 /*
 143  * Miscellaneous configurable options
 144  */
 145
 146 /*
 147  * For booting Linux, the board info and command line data
 148  * have to be in the first 64 MB of memory, since this is
 149  * the maximum mapped by the Linux kernel during initialization.
 150  */
 151 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 152
 153 /*
 154  * Environment Configuration
 155  */
 156 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 157 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 158
 159 #define HVBOOT                                  \
 160         "setenv bootargs config-addr=0x60000000; "      \
 161         "bootm 0x01000000 - 0x00f00000"
 162
 163 /*
 164  * DDR Setup
 165  */
 166 #define SPD_EEPROM_ADDRESS1     0x52
 167 #define SPD_EEPROM_ADDRESS2     0x54
 168 #define SPD_EEPROM_ADDRESS3     0x56
 169 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 170 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 171
 172 /*
 173  * IFC Definitions
 174  */
 175 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 176 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 177                                 + 0x8000000) | \
 178                                 CSPR_PORT_SIZE_16 | \
 179                                 CSPR_MSEL_NOR | \
 180                                 CSPR_V)
 181 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 182 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 183                                 CSPR_PORT_SIZE_16 | \
 184                                 CSPR_MSEL_NOR | \
 185                                 CSPR_V)
 186 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 187 /* NOR Flash Timing Params */
 188 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 189
 190 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 191                                 FTIM0_NOR_TEADC(0x5) | \
 192                                 FTIM0_NOR_TEAHC(0x5))
 193 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 194                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 195                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 196 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 197                                 FTIM2_NOR_TCH(0x4) | \
 198                                 FTIM2_NOR_TWPH(0x0E) | \
 199                                 FTIM2_NOR_TWP(0x1c))
 200 #define CONFIG_SYS_NOR_FTIM3    0x0
 201
 202 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 203
 204 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 205                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 206
 207 /* NAND Flash on IFC */
 208 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 209 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 210 #define CONFIG_SYS_NAND_BASE            0xff800000
 211 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 212
 213 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 214 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 215                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 216                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 217                                 | CSPR_V)
 218 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 219
 220 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 221                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 222                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 223                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 224                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 225                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 226                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 227
 228 /* ONFI NAND Flash mode0 Timing Params */
 229 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 230                                         FTIM0_NAND_TWP(0x18)   | \
 231                                         FTIM0_NAND_TWCHT(0x07) | \
 232                                         FTIM0_NAND_TWH(0x0a))
 233 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 234                                         FTIM1_NAND_TWBE(0x39)  | \
 235                                         FTIM1_NAND_TRR(0x0e)   | \
 236                                         FTIM1_NAND_TRP(0x18))
 237 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 238                                         FTIM2_NAND_TREH(0x0a) | \
 239                                         FTIM2_NAND_TWHRE(0x1e))
 240 #define CONFIG_SYS_NAND_FTIM3           0x0
 241
 242 #define CONFIG_SYS_NAND_DDR_LAW         11
 243 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 244 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 245
 246 #if defined(CONFIG_MTD_RAW_NAND)
 247 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 248 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 249 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 250 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 251 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 252 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 253 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 254 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 255 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 256 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 257 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 258 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 259 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 260 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 261 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 262 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 263 #else
 264 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 265 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 266 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 267 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 268 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 269 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 270 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 271 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 272 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 273 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 274 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 275 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 276 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 277 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 278 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 279 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 280 #endif
 281 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 282 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 283 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 284 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 285 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 286 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 287 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 288 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 289
 290 /* CPLD on IFC */
 291 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 292 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 293 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 294 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 295                                 | CSPR_PORT_SIZE_8 \
 296                                 | CSPR_MSEL_GPCM \
 297                                 | CSPR_V)
 298
 299 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 300 #define CONFIG_SYS_CSOR3        0x0
 301
 302 /* CPLD Timing parameters for IFC CS3 */
 303 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 304                                         FTIM0_GPCM_TEADC(0x0e) | \
 305                                         FTIM0_GPCM_TEAHC(0x0e))
 306 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 307                                         FTIM1_GPCM_TRAD(0x1f))
 308 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 309                                         FTIM2_GPCM_TCH(0x8) | \
 310                                         FTIM2_GPCM_TWP(0x1f))
 311 #define CONFIG_SYS_CS3_FTIM3            0x0
 312
 313 /* I2C */
 314 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 315 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 316
 317 #define I2C_MUX_CH_DEFAULT      0x8
 318 #define I2C_MUX_CH_VOL_MONITOR  0xa
 319 #define I2C_MUX_CH_VSC3316_FS   0xc
 320 #define I2C_MUX_CH_VSC3316_BS   0xd
 321
 322 /* Voltage monitor on channel 2*/
 323 #define I2C_VOL_MONITOR_ADDR            0x40
 324 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 325 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 326 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 327
 328 /* The lowest and highest voltage allowed for T4240RDB */
 329 #define VDD_MV_MIN                      819
 330 #define VDD_MV_MAX                      1212
 331
 332 /*
 333  * eSPI - Enhanced SPI
 334  */
 335
 336 /* Qman/Bman */
 337 #ifndef CONFIG_NOBQFMAN
 338 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 339 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 340 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 341 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 342 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 343 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 344 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 345 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 346 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 347                                         CONFIG_SYS_BMAN_CENA_SIZE)
 348 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 349 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 350 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 351 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 352 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 353 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 354 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 355 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 356 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 357 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 358 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 359                                         CONFIG_SYS_QMAN_CENA_SIZE)
 360 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 361 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 362
 363 #define CONFIG_SYS_DPAA_FMAN
 364 #define CONFIG_SYS_DPAA_PME
 365 #define CONFIG_SYS_PMAN
 366 #define CONFIG_SYS_DPAA_DCE
 367 #define CONFIG_SYS_DPAA_RMAN
 368 #endif /* CONFIG_NOBQFMAN */
 369
 370 #ifdef CONFIG_SYS_DPAA_FMAN
 371 #define SGMII_PHY_ADDR1 0x0
 372 #define SGMII_PHY_ADDR2 0x1
 373 #define SGMII_PHY_ADDR3 0x2
 374 #define SGMII_PHY_ADDR4 0x3
 375 #define SGMII_PHY_ADDR5 0x4
 376 #define SGMII_PHY_ADDR6 0x5
 377 #define SGMII_PHY_ADDR7 0x6
 378 #define SGMII_PHY_ADDR8 0x7
 379 #define FM1_10GEC1_PHY_ADDR     0x10
 380 #define FM1_10GEC2_PHY_ADDR     0x11
 381 #define FM2_10GEC1_PHY_ADDR     0x12
 382 #define FM2_10GEC2_PHY_ADDR     0x13
 383 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 384 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 385 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 386 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 387 #endif
 388
 389 /*
 390 * USB
 391 */
 392
 393 #ifdef CONFIG_MMC
 394 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 395 #endif
 396
 397
 398 #define __USB_PHY_TYPE  utmi
 399
 400 /*
 401  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 402  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 403  * interleaving. It can be cacheline, page, bank, superbank.
 404  * See doc/README.fsl-ddr for details.
 405  */
 406 #ifdef CONFIG_ARCH_T4240
 407 #define CTRL_INTLV_PREFERED 3way_4KB
 408 #else
 409 #define CTRL_INTLV_PREFERED cacheline
 410 #endif
 411
 412 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 413         "hwconfig=fsl_ddr:"                                     \
 414         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 415         "bank_intlv=auto;"                                      \
 416         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 417         "netdev=eth0\0"                                         \
 418         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 419         "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
 420         "tftpflash=tftpboot $loadaddr $uboot && "               \
 421         "protect off $ubootaddr +$filesize && "                 \
 422         "erase $ubootaddr +$filesize && "                       \
 423         "cp.b $loadaddr $ubootaddr $filesize && "               \
 424         "protect on $ubootaddr +$filesize && "                  \
 425         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 426         "consoledev=ttyS0\0"                                    \
 427         "ramdiskaddr=2000000\0"                                 \
 428         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 429         "fdtaddr=1e00000\0"                                     \
 430         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 431         "bdev=sda3\0"
 432
 433 #define HVBOOT                                  \
 434         "setenv bootargs config-addr=0x60000000; "      \
 435         "bootm 0x01000000 - 0x00f00000"
 436
 437 #include <asm/fsl_secure_boot.h>
 438
 439 #endif  /* __CONFIG_H */