ata: Migrate CONFIG_LIBATA to Kconfig
[platform/kernel/u-boot.git] / include / configs / T4240RDB.h
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * T4240 RDB board configuration file
9  */
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_FSL_SATA_V2
14 #define CONFIG_PCIE4
15
16 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
17
18 #ifdef CONFIG_RAMBOOT_PBL
19 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
20 #ifndef CONFIG_SDCARD
21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
23 #else
24 #define CONFIG_SPL_FLUSH_IMAGE
25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
26 #define CONFIG_SYS_TEXT_BASE            0x00201000
27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
28 #define CONFIG_SPL_PAD_TO               0x40000
29 #define CONFIG_SPL_MAX_SIZE             0x28000
30 #define RESET_VECTOR_OFFSET             0x27FFC
31 #define BOOT_PAGE_OFFSET                0x27000
32
33 #ifdef  CONFIG_SDCARD
34 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
35 #define CONFIG_SPL_MMC_MINIMAL
36 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
37 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
38 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
39 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
40 #ifndef CONFIG_SPL_BUILD
41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
42 #endif
43 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
44 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
45 #define CONFIG_SPL_MMC_BOOT
46 #endif
47
48 #ifdef CONFIG_SPL_BUILD
49 #define CONFIG_SPL_SKIP_RELOCATE
50 #define CONFIG_SPL_COMMON_INIT_DDR
51 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
52 #endif
53
54 #endif
55 #endif /* CONFIG_RAMBOOT_PBL */
56
57 #define CONFIG_DDR_ECC
58
59 /* High Level Configuration Options */
60 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
61 #define CONFIG_MP                       /* support multiple processors */
62
63 #ifndef CONFIG_SYS_TEXT_BASE
64 #define CONFIG_SYS_TEXT_BASE    0xeff40000
65 #endif
66
67 #ifndef CONFIG_RESET_VECTOR_ADDRESS
68 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
69 #endif
70
71 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
72 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
73 #define CONFIG_PCIE1                    /* PCIE controller 1 */
74 #define CONFIG_PCIE2                    /* PCIE controller 2 */
75 #define CONFIG_PCIE3                    /* PCIE controller 3 */
76 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
77 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
78
79 #define CONFIG_ENV_OVERWRITE
80
81 /*
82  * These can be toggled for performance analysis, otherwise use default.
83  */
84 #define CONFIG_SYS_CACHE_STASHING
85 #define CONFIG_BTB                      /* toggle branch predition */
86 #ifdef CONFIG_DDR_ECC
87 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
88 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
89 #endif
90
91 #define CONFIG_ENABLE_36BIT_PHYS
92
93 #define CONFIG_ADDR_MAP
94 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
95
96 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
97 #define CONFIG_SYS_MEMTEST_END          0x00400000
98 #define CONFIG_SYS_ALT_MEMTEST
99 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
100
101 /*
102  *  Config the L3 Cache as L3 SRAM
103  */
104 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
105 #define CONFIG_SYS_L3_SIZE              (512 << 10)
106 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
107 #ifdef CONFIG_RAMBOOT_PBL
108 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
109 #endif
110 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
111 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
112 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
113 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
114
115 #define CONFIG_SYS_DCSRBAR              0xf0000000
116 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
117
118 /*
119  * DDR Setup
120  */
121 #define CONFIG_VERY_BIG_RAM
122 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
123 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
124
125 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
126 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
127 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
128
129 #define CONFIG_DDR_SPD
130
131 /*
132  * IFC Definitions
133  */
134 #define CONFIG_SYS_FLASH_BASE   0xe0000000
135 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
136
137 #ifdef CONFIG_SPL_BUILD
138 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
139 #else
140 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
141 #endif
142
143 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
144 #define CONFIG_MISC_INIT_R
145
146 #define CONFIG_HWCONFIG
147
148 /* define to use L1 as initial stack */
149 #define CONFIG_L1_INIT_RAM
150 #define CONFIG_SYS_INIT_RAM_LOCK
151 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
152 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
153 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
154 /* The assembler doesn't like typecast */
155 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
156         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
157           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
158 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
159
160 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
161                                         GENERATED_GBL_DATA_SIZE)
162 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
163
164 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
165 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
166
167 /* Serial Port - controlled on board with jumper J8
168  * open - index 2
169  * shorted - index 1
170  */
171 #define CONFIG_CONS_INDEX       1
172 #define CONFIG_SYS_NS16550_SERIAL
173 #define CONFIG_SYS_NS16550_REG_SIZE     1
174 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
175
176 #define CONFIG_SYS_BAUDRATE_TABLE       \
177         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
178
179 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
180 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
181 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
182 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
183
184 /* I2C */
185 #define CONFIG_SYS_I2C
186 #define CONFIG_SYS_I2C_FSL
187 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
188 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
189 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
190 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
191
192 /*
193  * General PCI
194  * Memory space is mapped 1-1, but I/O space must start from 0.
195  */
196
197 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
198 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
199 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
200 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
201 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
202 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
203 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
204 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
205 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
206
207 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
208 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
209 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
210 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
211 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
212 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
213 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
214 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
215 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
216
217 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
218 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
219 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
220 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
221 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
222 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
223 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
224 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
225 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
226
227 /* controller 4, Base address 203000 */
228 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
229 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
230 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
231 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
232 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
233 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
234
235 #ifdef CONFIG_PCI
236 #define CONFIG_PCI_INDIRECT_BRIDGE
237
238 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
239 #endif  /* CONFIG_PCI */
240
241 /* SATA */
242 #ifdef CONFIG_FSL_SATA_V2
243 #define CONFIG_SYS_SATA_MAX_DEVICE      2
244 #define CONFIG_SATA1
245 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
246 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
247 #define CONFIG_SATA2
248 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
249 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
250
251 #define CONFIG_LBA48
252 #endif
253
254 #ifdef CONFIG_FMAN_ENET
255 #define CONFIG_MII              /* MII PHY management */
256 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
257 #endif
258
259 /*
260  * Environment
261  */
262 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
263 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
264
265 /*
266  * Command line configuration.
267  */
268
269 /*
270  * Miscellaneous configurable options
271  */
272 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
273 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
274 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
275 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
276
277 /*
278  * For booting Linux, the board info and command line data
279  * have to be in the first 64 MB of memory, since this is
280  * the maximum mapped by the Linux kernel during initialization.
281  */
282 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
283 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
284
285 #ifdef CONFIG_CMD_KGDB
286 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
287 #endif
288
289 /*
290  * Environment Configuration
291  */
292 #define CONFIG_ROOTPATH         "/opt/nfsroot"
293 #define CONFIG_BOOTFILE         "uImage"
294 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
295
296 /* default location for tftp and bootm */
297 #define CONFIG_LOADADDR         1000000
298
299 #define CONFIG_HVBOOT                                   \
300         "setenv bootargs config-addr=0x60000000; "      \
301         "bootm 0x01000000 - 0x00f00000"
302
303 #ifndef CONFIG_MTD_NOR_FLASH
304 #else
305 #define CONFIG_FLASH_CFI_DRIVER
306 #define CONFIG_SYS_FLASH_CFI
307 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
308 #endif
309
310 #if defined(CONFIG_SPIFLASH)
311 #define CONFIG_SYS_EXTRA_ENV_RELOC
312 #define CONFIG_ENV_SPI_BUS              0
313 #define CONFIG_ENV_SPI_CS               0
314 #define CONFIG_ENV_SPI_MAX_HZ           10000000
315 #define CONFIG_ENV_SPI_MODE             0
316 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
317 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
318 #define CONFIG_ENV_SECT_SIZE            0x10000
319 #elif defined(CONFIG_SDCARD)
320 #define CONFIG_SYS_EXTRA_ENV_RELOC
321 #define CONFIG_SYS_MMC_ENV_DEV          0
322 #define CONFIG_ENV_SIZE                 0x2000
323 #define CONFIG_ENV_OFFSET               (512 * 0x800)
324 #elif defined(CONFIG_NAND)
325 #define CONFIG_SYS_EXTRA_ENV_RELOC
326 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
327 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
328 #elif defined(CONFIG_ENV_IS_NOWHERE)
329 #define CONFIG_ENV_SIZE         0x2000
330 #else
331 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
332 #define CONFIG_ENV_SIZE         0x2000
333 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
334 #endif
335
336 #define CONFIG_SYS_CLK_FREQ     66666666
337 #define CONFIG_DDR_CLK_FREQ     133333333
338
339 #ifndef __ASSEMBLY__
340 unsigned long get_board_sys_clk(void);
341 unsigned long get_board_ddr_clk(void);
342 #endif
343
344 /*
345  * DDR Setup
346  */
347 #define CONFIG_SYS_SPD_BUS_NUM  0
348 #define SPD_EEPROM_ADDRESS1     0x52
349 #define SPD_EEPROM_ADDRESS2     0x54
350 #define SPD_EEPROM_ADDRESS3     0x56
351 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
352 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
353
354 /*
355  * IFC Definitions
356  */
357 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
358 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
359                                 + 0x8000000) | \
360                                 CSPR_PORT_SIZE_16 | \
361                                 CSPR_MSEL_NOR | \
362                                 CSPR_V)
363 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
364 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
365                                 CSPR_PORT_SIZE_16 | \
366                                 CSPR_MSEL_NOR | \
367                                 CSPR_V)
368 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
369 /* NOR Flash Timing Params */
370 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
371
372 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
373                                 FTIM0_NOR_TEADC(0x5) | \
374                                 FTIM0_NOR_TEAHC(0x5))
375 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
376                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
377                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
378 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
379                                 FTIM2_NOR_TCH(0x4) | \
380                                 FTIM2_NOR_TWPH(0x0E) | \
381                                 FTIM2_NOR_TWP(0x1c))
382 #define CONFIG_SYS_NOR_FTIM3    0x0
383
384 #define CONFIG_SYS_FLASH_QUIET_TEST
385 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
386
387 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
388 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
389 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
390 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
391
392 #define CONFIG_SYS_FLASH_EMPTY_INFO
393 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
394                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
395
396 /* NAND Flash on IFC */
397 #define CONFIG_NAND_FSL_IFC
398 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
399 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
400 #define CONFIG_SYS_NAND_BASE            0xff800000
401 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
402
403 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
404 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
405                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
406                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
407                                 | CSPR_V)
408 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
409
410 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
411                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
412                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
413                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
414                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
415                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
416                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
417
418 #define CONFIG_SYS_NAND_ONFI_DETECTION
419
420 /* ONFI NAND Flash mode0 Timing Params */
421 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
422                                         FTIM0_NAND_TWP(0x18)   | \
423                                         FTIM0_NAND_TWCHT(0x07) | \
424                                         FTIM0_NAND_TWH(0x0a))
425 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
426                                         FTIM1_NAND_TWBE(0x39)  | \
427                                         FTIM1_NAND_TRR(0x0e)   | \
428                                         FTIM1_NAND_TRP(0x18))
429 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
430                                         FTIM2_NAND_TREH(0x0a) | \
431                                         FTIM2_NAND_TWHRE(0x1e))
432 #define CONFIG_SYS_NAND_FTIM3           0x0
433
434 #define CONFIG_SYS_NAND_DDR_LAW         11
435 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
436 #define CONFIG_SYS_MAX_NAND_DEVICE      1
437
438 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
439
440 #if defined(CONFIG_NAND)
441 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
442 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
443 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
444 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
445 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
446 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
447 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
448 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
449 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
450 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
451 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
452 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
453 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
454 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
455 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
456 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
457 #else
458 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
459 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
460 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
461 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
462 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
463 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
464 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
465 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
466 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
467 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
468 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
469 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
470 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
471 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
472 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
473 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
474 #endif
475 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
476 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
477 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
478 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
479 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
480 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
481 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
482 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
483
484 /* CPLD on IFC */
485 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
486 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
487 #define CONFIG_SYS_CSPR3_EXT    (0xf)
488 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
489                                 | CSPR_PORT_SIZE_8 \
490                                 | CSPR_MSEL_GPCM \
491                                 | CSPR_V)
492
493 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
494 #define CONFIG_SYS_CSOR3        0x0
495
496 /* CPLD Timing parameters for IFC CS3 */
497 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
498                                         FTIM0_GPCM_TEADC(0x0e) | \
499                                         FTIM0_GPCM_TEAHC(0x0e))
500 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
501                                         FTIM1_GPCM_TRAD(0x1f))
502 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
503                                         FTIM2_GPCM_TCH(0x8) | \
504                                         FTIM2_GPCM_TWP(0x1f))
505 #define CONFIG_SYS_CS3_FTIM3            0x0
506
507 #if defined(CONFIG_RAMBOOT_PBL)
508 #define CONFIG_SYS_RAMBOOT
509 #endif
510
511 /* I2C */
512 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
513 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
514 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
515 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
516
517 #define I2C_MUX_CH_DEFAULT      0x8
518 #define I2C_MUX_CH_VOL_MONITOR  0xa
519 #define I2C_MUX_CH_VSC3316_FS   0xc
520 #define I2C_MUX_CH_VSC3316_BS   0xd
521
522 /* Voltage monitor on channel 2*/
523 #define I2C_VOL_MONITOR_ADDR            0x40
524 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
525 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
526 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
527
528 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
529 #ifndef CONFIG_SPL_BUILD
530 #define CONFIG_VID
531 #endif
532 #define CONFIG_VOL_MONITOR_IR36021_SET
533 #define CONFIG_VOL_MONITOR_IR36021_READ
534 /* The lowest and highest voltage allowed for T4240RDB */
535 #define VDD_MV_MIN                      819
536 #define VDD_MV_MAX                      1212
537
538 /*
539  * eSPI - Enhanced SPI
540  */
541 #define CONFIG_SF_DEFAULT_SPEED         10000000
542 #define CONFIG_SF_DEFAULT_MODE          0
543
544 /* Qman/Bman */
545 #ifndef CONFIG_NOBQFMAN
546 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
547 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
548 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
549 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
550 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
551 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
552 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
553 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
554 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
555 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
556                                         CONFIG_SYS_BMAN_CENA_SIZE)
557 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
558 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
559 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
560 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
561 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
562 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
563 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
564 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
565 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
566 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
567 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
568                                         CONFIG_SYS_QMAN_CENA_SIZE)
569 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
570 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
571
572 #define CONFIG_SYS_DPAA_FMAN
573 #define CONFIG_SYS_DPAA_PME
574 #define CONFIG_SYS_PMAN
575 #define CONFIG_SYS_DPAA_DCE
576 #define CONFIG_SYS_DPAA_RMAN
577 #define CONFIG_SYS_INTERLAKEN
578
579 /* Default address of microcode for the Linux Fman driver */
580 #if defined(CONFIG_SPIFLASH)
581 /*
582  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
583  * env, so we got 0x110000.
584  */
585 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
586 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
587 #elif defined(CONFIG_SDCARD)
588 /*
589  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
590  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
591  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
592  */
593 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
594 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
595 #elif defined(CONFIG_NAND)
596 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
597 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
598 #else
599 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
600 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
601 #endif
602 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
603 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
604 #endif /* CONFIG_NOBQFMAN */
605
606 #ifdef CONFIG_SYS_DPAA_FMAN
607 #define CONFIG_FMAN_ENET
608 #define CONFIG_PHYLIB_10G
609 #define CONFIG_PHY_VITESSE
610 #define CONFIG_PHY_CORTINA
611 #define CONFIG_SYS_CORTINA_FW_IN_NOR
612 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
613 #define CONFIG_CORTINA_FW_LENGTH        0x40000
614 #define CONFIG_PHY_TERANETICS
615 #define SGMII_PHY_ADDR1 0x0
616 #define SGMII_PHY_ADDR2 0x1
617 #define SGMII_PHY_ADDR3 0x2
618 #define SGMII_PHY_ADDR4 0x3
619 #define SGMII_PHY_ADDR5 0x4
620 #define SGMII_PHY_ADDR6 0x5
621 #define SGMII_PHY_ADDR7 0x6
622 #define SGMII_PHY_ADDR8 0x7
623 #define FM1_10GEC1_PHY_ADDR     0x10
624 #define FM1_10GEC2_PHY_ADDR     0x11
625 #define FM2_10GEC1_PHY_ADDR     0x12
626 #define FM2_10GEC2_PHY_ADDR     0x13
627 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
628 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
629 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
630 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
631 #endif
632
633 /* SATA */
634 #ifdef CONFIG_FSL_SATA_V2
635 #define CONFIG_SYS_SATA_MAX_DEVICE      2
636 #define CONFIG_SATA1
637 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
638 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
639 #define CONFIG_SATA2
640 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
641 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
642
643 #define CONFIG_LBA48
644 #endif
645
646 #ifdef CONFIG_FMAN_ENET
647 #define CONFIG_MII              /* MII PHY management */
648 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
649 #endif
650
651 /*
652 * USB
653 */
654 #define CONFIG_USB_EHCI_FSL
655 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
656 #define CONFIG_HAS_FSL_DR_USB
657
658 #ifdef CONFIG_MMC
659 #define CONFIG_FSL_ESDHC
660 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
661 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
662 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
663 #endif
664
665
666 #define __USB_PHY_TYPE  utmi
667
668 /*
669  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
670  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
671  * interleaving. It can be cacheline, page, bank, superbank.
672  * See doc/README.fsl-ddr for details.
673  */
674 #ifdef CONFIG_ARCH_T4240
675 #define CTRL_INTLV_PREFERED 3way_4KB
676 #else
677 #define CTRL_INTLV_PREFERED cacheline
678 #endif
679
680 #define CONFIG_EXTRA_ENV_SETTINGS                               \
681         "hwconfig=fsl_ddr:"                                     \
682         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
683         "bank_intlv=auto;"                                      \
684         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
685         "netdev=eth0\0"                                         \
686         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
687         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
688         "tftpflash=tftpboot $loadaddr $uboot && "               \
689         "protect off $ubootaddr +$filesize && "                 \
690         "erase $ubootaddr +$filesize && "                       \
691         "cp.b $loadaddr $ubootaddr $filesize && "               \
692         "protect on $ubootaddr +$filesize && "                  \
693         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
694         "consoledev=ttyS0\0"                                    \
695         "ramdiskaddr=2000000\0"                                 \
696         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
697         "fdtaddr=1e00000\0"                                     \
698         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
699         "bdev=sda3\0"
700
701 #define CONFIG_HVBOOT                                   \
702         "setenv bootargs config-addr=0x60000000; "      \
703         "bootm 0x01000000 - 0x00f00000"
704
705 #define CONFIG_LINUX                                    \
706         "setenv bootargs root=/dev/ram rw "             \
707         "console=$consoledev,$baudrate $othbootargs;"   \
708         "setenv ramdiskaddr 0x02000000;"                \
709         "setenv fdtaddr 0x00c00000;"                    \
710         "setenv loadaddr 0x1000000;"                    \
711         "bootm $loadaddr $ramdiskaddr $fdtaddr"
712
713 #define CONFIG_HDBOOT                                   \
714         "setenv bootargs root=/dev/$bdev rw "           \
715         "console=$consoledev,$baudrate $othbootargs;"   \
716         "tftp $loadaddr $bootfile;"                     \
717         "tftp $fdtaddr $fdtfile;"                       \
718         "bootm $loadaddr - $fdtaddr"
719
720 #define CONFIG_NFSBOOTCOMMAND                   \
721         "setenv bootargs root=/dev/nfs rw "     \
722         "nfsroot=$serverip:$rootpath "          \
723         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
724         "console=$consoledev,$baudrate $othbootargs;"   \
725         "tftp $loadaddr $bootfile;"             \
726         "tftp $fdtaddr $fdtfile;"               \
727         "bootm $loadaddr - $fdtaddr"
728
729 #define CONFIG_RAMBOOTCOMMAND                           \
730         "setenv bootargs root=/dev/ram rw "             \
731         "console=$consoledev,$baudrate $othbootargs;"   \
732         "tftp $ramdiskaddr $ramdiskfile;"               \
733         "tftp $loadaddr $bootfile;"                     \
734         "tftp $fdtaddr $fdtfile;"                       \
735         "bootm $loadaddr $ramdiskaddr $fdtaddr"
736
737 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
738
739 #include <asm/fsl_secure_boot.h>
740
741 #endif  /* __CONFIG_H */