include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17
  18 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  22 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  23 #ifndef CONFIG_SDCARD
  24 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  26 #else
  27 #define CONFIG_SPL_FLUSH_IMAGE
  28 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  29 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  30 #define CONFIG_SYS_TEXT_BASE            0x00201000
  31 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  32 #define CONFIG_SPL_PAD_TO               0x40000
  33 #define CONFIG_SPL_MAX_SIZE             0x28000
  34 #define RESET_VECTOR_OFFSET             0x27FFC
  35 #define BOOT_PAGE_OFFSET                0x27000
  36
  37 #ifdef  CONFIG_SDCARD
  38 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  39 #define CONFIG_SPL_MMC_MINIMAL
  40 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  41 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  42 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  43 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  44 #ifndef CONFIG_SPL_BUILD
  45 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  46 #endif
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  48 #define CONFIG_SPL_MMC_BOOT
  49 #endif
  50
  51 #ifdef CONFIG_SPL_BUILD
  52 #define CONFIG_SPL_SKIP_RELOCATE
  53 #define CONFIG_SPL_COMMON_INIT_DDR
  54 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  55 #define CONFIG_SYS_NO_FLASH
  56 #endif
  57
  58 #endif
  59 #endif /* CONFIG_RAMBOOT_PBL */
  60
  61 #define CONFIG_DDR_ECC
  62
  63 #define CONFIG_CMD_REGINFO
  64
  65 /* High Level Configuration Options */
  66 #define CONFIG_BOOKE
  67 #define CONFIG_E500                     /* BOOKE e500 family */
  68 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  69 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  70 #define CONFIG_MP                       /* support multiple processors */
  71
  72 #ifndef CONFIG_SYS_TEXT_BASE
  73 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  74 #endif
  75
  76 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  77 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  78 #endif
  79
  80 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  81 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  82 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  83 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  84 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  85 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  86 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  87 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  88 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  89 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  90
  91 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  92
  93 #define CONFIG_ENV_OVERWRITE
  94
  95 /*
  96  * These can be toggled for performance analysis, otherwise use default.
  97  */
  98 #define CONFIG_SYS_CACHE_STASHING
  99 #define CONFIG_BTB                      /* toggle branch predition */
 100 #ifdef CONFIG_DDR_ECC
 101 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 102 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 103 #endif
 104
 105 #define CONFIG_ENABLE_36BIT_PHYS
 106
 107 #define CONFIG_ADDR_MAP
 108 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 109
 110 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 111 #define CONFIG_SYS_MEMTEST_END          0x00400000
 112 #define CONFIG_SYS_ALT_MEMTEST
 113 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 114
 115 /*
 116  *  Config the L3 Cache as L3 SRAM
 117  */
 118 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 119 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 120 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 121 #ifdef CONFIG_RAMBOOT_PBL
 122 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 123 #endif
 124 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 125 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 126 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 127 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 128
 129 #define CONFIG_SYS_DCSRBAR              0xf0000000
 130 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 131
 132 /*
 133  * DDR Setup
 134  */
 135 #define CONFIG_VERY_BIG_RAM
 136 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 137 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 138
 139 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 140 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 141 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 142 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 143
 144 #define CONFIG_DDR_SPD
 145 #define CONFIG_SYS_FSL_DDR3
 146
 147 /*
 148  * IFC Definitions
 149  */
 150 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 151 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 152
 153 #ifdef CONFIG_SPL_BUILD
 154 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 155 #else
 156 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 157 #endif
 158
 159 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 160 #define CONFIG_MISC_INIT_R
 161
 162 #define CONFIG_HWCONFIG
 163
 164 /* define to use L1 as initial stack */
 165 #define CONFIG_L1_INIT_RAM
 166 #define CONFIG_SYS_INIT_RAM_LOCK
 167 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 168 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 169 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 170 /* The assembler doesn't like typecast */
 171 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 172         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 173           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 174 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 175
 176 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 177                                         GENERATED_GBL_DATA_SIZE)
 178 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 179
 180 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 181 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 182
 183 /* Serial Port - controlled on board with jumper J8
 184  * open - index 2
 185  * shorted - index 1
 186  */
 187 #define CONFIG_CONS_INDEX       1
 188 #define CONFIG_SYS_NS16550_SERIAL
 189 #define CONFIG_SYS_NS16550_REG_SIZE     1
 190 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 191
 192 #define CONFIG_SYS_BAUDRATE_TABLE       \
 193         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 194
 195 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 196 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 197 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 198 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 199
 200 /* I2C */
 201 #define CONFIG_SYS_I2C
 202 #define CONFIG_SYS_I2C_FSL
 203 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 204 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 205 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 206 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 207
 208 /*
 209  * General PCI
 210  * Memory space is mapped 1-1, but I/O space must start from 0.
 211  */
 212
 213 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 214 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 215 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 216 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 217 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 218 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 219 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 220 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 221 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 222
 223 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 224 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 225 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 226 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 227 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 228 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 229 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 230 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 231 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 232
 233 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 234 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 235 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 236 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 237 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 238 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 239 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 240 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 241 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 242
 243 /* controller 4, Base address 203000 */
 244 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 245 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 246 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 247 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 248 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 249 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 250
 251 #ifdef CONFIG_PCI
 252 #define CONFIG_PCI_INDIRECT_BRIDGE
 253 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 254
 255 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 256 #define CONFIG_DOS_PARTITION
 257 #endif  /* CONFIG_PCI */
 258
 259 /* SATA */
 260 #ifdef CONFIG_FSL_SATA_V2
 261 #define CONFIG_LIBATA
 262 #define CONFIG_FSL_SATA
 263
 264 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 265 #define CONFIG_SATA1
 266 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 267 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 268 #define CONFIG_SATA2
 269 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 270 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 271
 272 #define CONFIG_LBA48
 273 #define CONFIG_CMD_SATA
 274 #define CONFIG_DOS_PARTITION
 275 #endif
 276
 277 #ifdef CONFIG_FMAN_ENET
 278 #define CONFIG_MII              /* MII PHY management */
 279 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 280 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 281 #endif
 282
 283 /*
 284  * Environment
 285  */
 286 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 287 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 288
 289 /*
 290  * Command line configuration.
 291  */
 292 #define CONFIG_CMD_ERRATA
 293 #define CONFIG_CMD_IRQ
 294
 295 #ifdef CONFIG_PCI
 296 #define CONFIG_CMD_PCI
 297 #endif
 298
 299 /*
 300  * Miscellaneous configurable options
 301  */
 302 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 303 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 304 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 305 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 306 #ifdef CONFIG_CMD_KGDB
 307 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 308 #else
 309 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 310 #endif
 311 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 312 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 313 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 314
 315 /*
 316  * For booting Linux, the board info and command line data
 317  * have to be in the first 64 MB of memory, since this is
 318  * the maximum mapped by the Linux kernel during initialization.
 319  */
 320 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 321 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 322
 323 #ifdef CONFIG_CMD_KGDB
 324 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 325 #endif
 326
 327 /*
 328  * Environment Configuration
 329  */
 330 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 331 #define CONFIG_BOOTFILE         "uImage"
 332 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 333
 334 /* default location for tftp and bootm */
 335 #define CONFIG_LOADADDR         1000000
 336
 337 #define CONFIG_BAUDRATE 115200
 338
 339 #define CONFIG_HVBOOT                                   \
 340         "setenv bootargs config-addr=0x60000000; "      \
 341         "bootm 0x01000000 - 0x00f00000"
 342
 343 #ifdef CONFIG_SYS_NO_FLASH
 344 #ifndef CONFIG_RAMBOOT_PBL
 345 #define CONFIG_ENV_IS_NOWHERE
 346 #endif
 347 #else
 348 #define CONFIG_FLASH_CFI_DRIVER
 349 #define CONFIG_SYS_FLASH_CFI
 350 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 351 #endif
 352
 353 #if defined(CONFIG_SPIFLASH)
 354 #define CONFIG_SYS_EXTRA_ENV_RELOC
 355 #define CONFIG_ENV_IS_IN_SPI_FLASH
 356 #define CONFIG_ENV_SPI_BUS              0
 357 #define CONFIG_ENV_SPI_CS               0
 358 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 359 #define CONFIG_ENV_SPI_MODE             0
 360 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 361 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 362 #define CONFIG_ENV_SECT_SIZE            0x10000
 363 #elif defined(CONFIG_SDCARD)
 364 #define CONFIG_SYS_EXTRA_ENV_RELOC
 365 #define CONFIG_ENV_IS_IN_MMC
 366 #define CONFIG_SYS_MMC_ENV_DEV          0
 367 #define CONFIG_ENV_SIZE                 0x2000
 368 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 369 #elif defined(CONFIG_NAND)
 370 #define CONFIG_SYS_EXTRA_ENV_RELOC
 371 #define CONFIG_ENV_IS_IN_NAND
 372 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 373 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 374 #elif defined(CONFIG_ENV_IS_NOWHERE)
 375 #define CONFIG_ENV_SIZE         0x2000
 376 #else
 377 #define CONFIG_ENV_IS_IN_FLASH
 378 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 379 #define CONFIG_ENV_SIZE         0x2000
 380 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 381 #endif
 382
 383 #define CONFIG_SYS_CLK_FREQ     66666666
 384 #define CONFIG_DDR_CLK_FREQ     133333333
 385
 386 #ifndef __ASSEMBLY__
 387 unsigned long get_board_sys_clk(void);
 388 unsigned long get_board_ddr_clk(void);
 389 #endif
 390
 391 /*
 392  * DDR Setup
 393  */
 394 #define CONFIG_SYS_SPD_BUS_NUM  0
 395 #define SPD_EEPROM_ADDRESS1     0x52
 396 #define SPD_EEPROM_ADDRESS2     0x54
 397 #define SPD_EEPROM_ADDRESS3     0x56
 398 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 399 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 400
 401 /*
 402  * IFC Definitions
 403  */
 404 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 405 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 406                                 + 0x8000000) | \
 407                                 CSPR_PORT_SIZE_16 | \
 408                                 CSPR_MSEL_NOR | \
 409                                 CSPR_V)
 410 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 411 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 412                                 CSPR_PORT_SIZE_16 | \
 413                                 CSPR_MSEL_NOR | \
 414                                 CSPR_V)
 415 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 416 /* NOR Flash Timing Params */
 417 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 418
 419 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 420                                 FTIM0_NOR_TEADC(0x5) | \
 421                                 FTIM0_NOR_TEAHC(0x5))
 422 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 423                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 424                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 425 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 426                                 FTIM2_NOR_TCH(0x4) | \
 427                                 FTIM2_NOR_TWPH(0x0E) | \
 428                                 FTIM2_NOR_TWP(0x1c))
 429 #define CONFIG_SYS_NOR_FTIM3    0x0
 430
 431 #define CONFIG_SYS_FLASH_QUIET_TEST
 432 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 433
 434 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 435 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 436 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 437 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 438
 439 #define CONFIG_SYS_FLASH_EMPTY_INFO
 440 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 441                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 442
 443 /* NAND Flash on IFC */
 444 #define CONFIG_NAND_FSL_IFC
 445 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 446 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 447 #define CONFIG_SYS_NAND_BASE            0xff800000
 448 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 449
 450 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 451 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 452                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 453                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 454                                 | CSPR_V)
 455 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 456
 457 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 458                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 459                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 460                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 461                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 462                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 463                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 464
 465 #define CONFIG_SYS_NAND_ONFI_DETECTION
 466
 467 /* ONFI NAND Flash mode0 Timing Params */
 468 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 469                                         FTIM0_NAND_TWP(0x18)   | \
 470                                         FTIM0_NAND_TWCHT(0x07) | \
 471                                         FTIM0_NAND_TWH(0x0a))
 472 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 473                                         FTIM1_NAND_TWBE(0x39)  | \
 474                                         FTIM1_NAND_TRR(0x0e)   | \
 475                                         FTIM1_NAND_TRP(0x18))
 476 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 477                                         FTIM2_NAND_TREH(0x0a) | \
 478                                         FTIM2_NAND_TWHRE(0x1e))
 479 #define CONFIG_SYS_NAND_FTIM3           0x0
 480
 481 #define CONFIG_SYS_NAND_DDR_LAW         11
 482 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 483 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 484 #define CONFIG_CMD_NAND
 485
 486 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 487
 488 #if defined(CONFIG_NAND)
 489 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 490 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 491 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 492 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 493 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 494 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 495 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 496 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 497 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 498 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 499 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 500 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 501 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 502 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 503 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 504 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 505 #else
 506 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 507 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 508 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 509 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 510 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 511 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 512 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 513 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 514 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 515 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 516 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 517 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 518 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 519 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 520 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 521 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 522 #endif
 523 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 524 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 525 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 526 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 527 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 528 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 529 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 530 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 531
 532 /* CPLD on IFC */
 533 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 534 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 535 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 536 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 537                                 | CSPR_PORT_SIZE_8 \
 538                                 | CSPR_MSEL_GPCM \
 539                                 | CSPR_V)
 540
 541 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 542 #define CONFIG_SYS_CSOR3        0x0
 543
 544 /* CPLD Timing parameters for IFC CS3 */
 545 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 546                                         FTIM0_GPCM_TEADC(0x0e) | \
 547                                         FTIM0_GPCM_TEAHC(0x0e))
 548 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 549                                         FTIM1_GPCM_TRAD(0x1f))
 550 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 551                                         FTIM2_GPCM_TCH(0x8) | \
 552                                         FTIM2_GPCM_TWP(0x1f))
 553 #define CONFIG_SYS_CS3_FTIM3            0x0
 554
 555 #if defined(CONFIG_RAMBOOT_PBL)
 556 #define CONFIG_SYS_RAMBOOT
 557 #endif
 558
 559 /* I2C */
 560 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 561 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 562 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 563 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 564
 565 #define I2C_MUX_CH_DEFAULT      0x8
 566 #define I2C_MUX_CH_VOL_MONITOR  0xa
 567 #define I2C_MUX_CH_VSC3316_FS   0xc
 568 #define I2C_MUX_CH_VSC3316_BS   0xd
 569
 570 /* Voltage monitor on channel 2*/
 571 #define I2C_VOL_MONITOR_ADDR            0x40
 572 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 573 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 574 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 575
 576 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 577 #ifndef CONFIG_SPL_BUILD
 578 #define CONFIG_VID
 579 #endif
 580 #define CONFIG_VOL_MONITOR_IR36021_SET
 581 #define CONFIG_VOL_MONITOR_IR36021_READ
 582 /* The lowest and highest voltage allowed for T4240RDB */
 583 #define VDD_MV_MIN                      819
 584 #define VDD_MV_MAX                      1212
 585
 586 /*
 587  * eSPI - Enhanced SPI
 588  */
 589 #define CONFIG_SF_DEFAULT_SPEED         10000000
 590 #define CONFIG_SF_DEFAULT_MODE          0
 591
 592 /* Qman/Bman */
 593 #ifndef CONFIG_NOBQFMAN
 594 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 595 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 596 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 597 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 598 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 599 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 600 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 601 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 602 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 603 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 604                                         CONFIG_SYS_BMAN_CENA_SIZE)
 605 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 606 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 607 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 608 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 609 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 610 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 611 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 612 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 613 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 614 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 615 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 616                                         CONFIG_SYS_QMAN_CENA_SIZE)
 617 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 618 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 619
 620 #define CONFIG_SYS_DPAA_FMAN
 621 #define CONFIG_SYS_DPAA_PME
 622 #define CONFIG_SYS_PMAN
 623 #define CONFIG_SYS_DPAA_DCE
 624 #define CONFIG_SYS_DPAA_RMAN
 625 #define CONFIG_SYS_INTERLAKEN
 626
 627 /* Default address of microcode for the Linux Fman driver */
 628 #if defined(CONFIG_SPIFLASH)
 629 /*
 630  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 631  * env, so we got 0x110000.
 632  */
 633 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 634 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 635 #elif defined(CONFIG_SDCARD)
 636 /*
 637  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 638  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 639  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 640  */
 641 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 642 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 643 #elif defined(CONFIG_NAND)
 644 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 645 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 646 #else
 647 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 648 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 649 #endif
 650 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 651 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 652 #endif /* CONFIG_NOBQFMAN */
 653
 654 #ifdef CONFIG_SYS_DPAA_FMAN
 655 #define CONFIG_FMAN_ENET
 656 #define CONFIG_PHYLIB_10G
 657 #define CONFIG_PHY_VITESSE
 658 #define CONFIG_PHY_CORTINA
 659 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 660 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 661 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 662 #define CONFIG_PHY_TERANETICS
 663 #define SGMII_PHY_ADDR1 0x0
 664 #define SGMII_PHY_ADDR2 0x1
 665 #define SGMII_PHY_ADDR3 0x2
 666 #define SGMII_PHY_ADDR4 0x3
 667 #define SGMII_PHY_ADDR5 0x4
 668 #define SGMII_PHY_ADDR6 0x5
 669 #define SGMII_PHY_ADDR7 0x6
 670 #define SGMII_PHY_ADDR8 0x7
 671 #define FM1_10GEC1_PHY_ADDR     0x10
 672 #define FM1_10GEC2_PHY_ADDR     0x11
 673 #define FM2_10GEC1_PHY_ADDR     0x12
 674 #define FM2_10GEC2_PHY_ADDR     0x13
 675 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 676 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 677 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 678 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 679 #endif
 680
 681 /* SATA */
 682 #ifdef CONFIG_FSL_SATA_V2
 683 #define CONFIG_LIBATA
 684 #define CONFIG_FSL_SATA
 685
 686 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 687 #define CONFIG_SATA1
 688 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 689 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 690 #define CONFIG_SATA2
 691 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 692 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 693
 694 #define CONFIG_LBA48
 695 #define CONFIG_CMD_SATA
 696 #define CONFIG_DOS_PARTITION
 697 #endif
 698
 699 #ifdef CONFIG_FMAN_ENET
 700 #define CONFIG_MII              /* MII PHY management */
 701 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 702 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 703 #endif
 704
 705 /*
 706 * USB
 707 */
 708 #define CONFIG_USB_EHCI
 709 #define CONFIG_USB_EHCI_FSL
 710 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 711 #define CONFIG_HAS_FSL_DR_USB
 712
 713 #define CONFIG_MMC
 714
 715 #ifdef CONFIG_MMC
 716 #define CONFIG_FSL_ESDHC
 717 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 718 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 719 #define CONFIG_GENERIC_MMC
 720 #define CONFIG_DOS_PARTITION
 721 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 722 #endif
 723
 724 /* Hash command with SHA acceleration supported in hardware */
 725 #ifdef CONFIG_FSL_CAAM
 726 #define CONFIG_CMD_HASH
 727 #define CONFIG_SHA_HW_ACCEL
 728 #endif
 729
 730
 731 #define __USB_PHY_TYPE  utmi
 732
 733 /*
 734  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 735  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 736  * interleaving. It can be cacheline, page, bank, superbank.
 737  * See doc/README.fsl-ddr for details.
 738  */
 739 #ifdef CONFIG_PPC_T4240
 740 #define CTRL_INTLV_PREFERED 3way_4KB
 741 #else
 742 #define CTRL_INTLV_PREFERED cacheline
 743 #endif
 744
 745 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 746         "hwconfig=fsl_ddr:"                                     \
 747         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 748         "bank_intlv=auto;"                                      \
 749         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 750         "netdev=eth0\0"                                         \
 751         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 752         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 753         "tftpflash=tftpboot $loadaddr $uboot && "               \
 754         "protect off $ubootaddr +$filesize && "                 \
 755         "erase $ubootaddr +$filesize && "                       \
 756         "cp.b $loadaddr $ubootaddr $filesize && "               \
 757         "protect on $ubootaddr +$filesize && "                  \
 758         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 759         "consoledev=ttyS0\0"                                    \
 760         "ramdiskaddr=2000000\0"                                 \
 761         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 762         "fdtaddr=1e00000\0"                                     \
 763         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 764         "bdev=sda3\0"
 765
 766 #define CONFIG_HVBOOT                                   \
 767         "setenv bootargs config-addr=0x60000000; "      \
 768         "bootm 0x01000000 - 0x00f00000"
 769
 770 #define CONFIG_LINUX                                    \
 771         "setenv bootargs root=/dev/ram rw "             \
 772         "console=$consoledev,$baudrate $othbootargs;"   \
 773         "setenv ramdiskaddr 0x02000000;"                \
 774         "setenv fdtaddr 0x00c00000;"                    \
 775         "setenv loadaddr 0x1000000;"                    \
 776         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 777
 778 #define CONFIG_HDBOOT                                   \
 779         "setenv bootargs root=/dev/$bdev rw "           \
 780         "console=$consoledev,$baudrate $othbootargs;"   \
 781         "tftp $loadaddr $bootfile;"                     \
 782         "tftp $fdtaddr $fdtfile;"                       \
 783         "bootm $loadaddr - $fdtaddr"
 784
 785 #define CONFIG_NFSBOOTCOMMAND                   \
 786         "setenv bootargs root=/dev/nfs rw "     \
 787         "nfsroot=$serverip:$rootpath "          \
 788         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 789         "console=$consoledev,$baudrate $othbootargs;"   \
 790         "tftp $loadaddr $bootfile;"             \
 791         "tftp $fdtaddr $fdtfile;"               \
 792         "bootm $loadaddr - $fdtaddr"
 793
 794 #define CONFIG_RAMBOOTCOMMAND                           \
 795         "setenv bootargs root=/dev/ram rw "             \
 796         "console=$consoledev,$baudrate $othbootargs;"   \
 797         "tftp $ramdiskaddr $ramdiskfile;"               \
 798         "tftp $loadaddr $bootfile;"                     \
 799         "tftp $fdtaddr $fdtfile;"                       \
 800         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 801
 802 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 803
 804 #include <asm/fsl_secure_boot.h>
 805
 806 #endif  /* __CONFIG_H */