include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  24 #ifndef CONFIG_SDCARD
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_SERIAL_SUPPORT
  30 #define CONFIG_SPL_FLUSH_IMAGE
  31 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  32 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  33 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  34 #define CONFIG_SPL_I2C_SUPPORT
  35 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  36 #define CONFIG_SYS_TEXT_BASE            0x00201000
  37 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  38 #define CONFIG_SPL_PAD_TO               0x40000
  39 #define CONFIG_SPL_MAX_SIZE             0x28000
  40 #define RESET_VECTOR_OFFSET             0x27FFC
  41 #define BOOT_PAGE_OFFSET                0x27000
  42
  43 #ifdef  CONFIG_SDCARD
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  45 #define CONFIG_SPL_MMC_SUPPORT
  46 #define CONFIG_SPL_MMC_MINIMAL
  47 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  48 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  49 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  50 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  51 #ifndef CONFIG_SPL_BUILD
  52 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  53 #endif
  54 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  55 #define CONFIG_SPL_MMC_BOOT
  56 #endif
  57
  58 #ifdef CONFIG_SPL_BUILD
  59 #define CONFIG_SPL_SKIP_RELOCATE
  60 #define CONFIG_SPL_COMMON_INIT_DDR
  61 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  62 #define CONFIG_SYS_NO_FLASH
  63 #endif
  64
  65 #endif
  66 #endif /* CONFIG_RAMBOOT_PBL */
  67
  68 #define CONFIG_DDR_ECC
  69
  70 #define CONFIG_CMD_REGINFO
  71
  72 /* High Level Configuration Options */
  73 #define CONFIG_BOOKE
  74 #define CONFIG_E500                     /* BOOKE e500 family */
  75 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  76 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  77 #define CONFIG_MP                       /* support multiple processors */
  78
  79 #ifndef CONFIG_SYS_TEXT_BASE
  80 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  81 #endif
  82
  83 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  84 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  85 #endif
  86
  87 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  88 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  89 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  90 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  91 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  92 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  93 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  94 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  95 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  96 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  97
  98 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  99
 100 #define CONFIG_ENV_OVERWRITE
 101
 102 /*
 103  * These can be toggled for performance analysis, otherwise use default.
 104  */
 105 #define CONFIG_SYS_CACHE_STASHING
 106 #define CONFIG_BTB                      /* toggle branch predition */
 107 #ifdef CONFIG_DDR_ECC
 108 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 109 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 110 #endif
 111
 112 #define CONFIG_ENABLE_36BIT_PHYS
 113
 114 #define CONFIG_ADDR_MAP
 115 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 116
 117 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 118 #define CONFIG_SYS_MEMTEST_END          0x00400000
 119 #define CONFIG_SYS_ALT_MEMTEST
 120 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 121
 122 /*
 123  *  Config the L3 Cache as L3 SRAM
 124  */
 125 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 126 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 127 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 128 #ifdef CONFIG_RAMBOOT_PBL
 129 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 130 #endif
 131 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 132 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 133 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 134 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 135
 136 #define CONFIG_SYS_DCSRBAR              0xf0000000
 137 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 138
 139 /*
 140  * DDR Setup
 141  */
 142 #define CONFIG_VERY_BIG_RAM
 143 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 144 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 145
 146 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 147 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 148 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 149 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 150
 151 #define CONFIG_DDR_SPD
 152 #define CONFIG_SYS_FSL_DDR3
 153
 154 /*
 155  * IFC Definitions
 156  */
 157 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 158 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 159
 160 #ifdef CONFIG_SPL_BUILD
 161 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 162 #else
 163 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 164 #endif
 165
 166 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 167 #define CONFIG_MISC_INIT_R
 168
 169 #define CONFIG_HWCONFIG
 170
 171 /* define to use L1 as initial stack */
 172 #define CONFIG_L1_INIT_RAM
 173 #define CONFIG_SYS_INIT_RAM_LOCK
 174 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 176 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 177 /* The assembler doesn't like typecast */
 178 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 179         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 180           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 181 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 182
 183 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 184                                         GENERATED_GBL_DATA_SIZE)
 185 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 186
 187 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 188 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 189
 190 /* Serial Port - controlled on board with jumper J8
 191  * open - index 2
 192  * shorted - index 1
 193  */
 194 #define CONFIG_CONS_INDEX       1
 195 #define CONFIG_SYS_NS16550_SERIAL
 196 #define CONFIG_SYS_NS16550_REG_SIZE     1
 197 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 198
 199 #define CONFIG_SYS_BAUDRATE_TABLE       \
 200         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 201
 202 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 203 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 204 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 205 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 206
 207 /* I2C */
 208 #define CONFIG_SYS_I2C
 209 #define CONFIG_SYS_I2C_FSL
 210 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 211 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 212 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 213 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 214
 215 /*
 216  * General PCI
 217  * Memory space is mapped 1-1, but I/O space must start from 0.
 218  */
 219
 220 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 221 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 222 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 223 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 224 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 225 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 226 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 227 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 228 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 229
 230 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 231 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 232 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 233 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 234 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 235 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 236 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 237 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 238 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 239
 240 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 241 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 242 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 243 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 244 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 245 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 246 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 247 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 248 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 249
 250 /* controller 4, Base address 203000 */
 251 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 252 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 253 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 254 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 255 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 256 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 257
 258 #ifdef CONFIG_PCI
 259 #define CONFIG_PCI_INDIRECT_BRIDGE
 260 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 261
 262 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 263 #define CONFIG_DOS_PARTITION
 264 #endif  /* CONFIG_PCI */
 265
 266 /* SATA */
 267 #ifdef CONFIG_FSL_SATA_V2
 268 #define CONFIG_LIBATA
 269 #define CONFIG_FSL_SATA
 270
 271 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 272 #define CONFIG_SATA1
 273 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 274 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 275 #define CONFIG_SATA2
 276 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 277 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 278
 279 #define CONFIG_LBA48
 280 #define CONFIG_CMD_SATA
 281 #define CONFIG_DOS_PARTITION
 282 #endif
 283
 284 #ifdef CONFIG_FMAN_ENET
 285 #define CONFIG_MII              /* MII PHY management */
 286 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 287 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 288 #endif
 289
 290 /*
 291  * Environment
 292  */
 293 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 294 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 295
 296 /*
 297  * Command line configuration.
 298  */
 299 #define CONFIG_CMD_ERRATA
 300 #define CONFIG_CMD_IRQ
 301
 302 #ifdef CONFIG_PCI
 303 #define CONFIG_CMD_PCI
 304 #endif
 305
 306 /*
 307  * Miscellaneous configurable options
 308  */
 309 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 310 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 311 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 312 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 313 #ifdef CONFIG_CMD_KGDB
 314 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 315 #else
 316 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 317 #endif
 318 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 319 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 320 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 321
 322 /*
 323  * For booting Linux, the board info and command line data
 324  * have to be in the first 64 MB of memory, since this is
 325  * the maximum mapped by the Linux kernel during initialization.
 326  */
 327 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 328 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 329
 330 #ifdef CONFIG_CMD_KGDB
 331 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 332 #endif
 333
 334 /*
 335  * Environment Configuration
 336  */
 337 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 338 #define CONFIG_BOOTFILE         "uImage"
 339 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 340
 341 /* default location for tftp and bootm */
 342 #define CONFIG_LOADADDR         1000000
 343
 344 #define CONFIG_BAUDRATE 115200
 345
 346 #define CONFIG_HVBOOT                                   \
 347         "setenv bootargs config-addr=0x60000000; "      \
 348         "bootm 0x01000000 - 0x00f00000"
 349
 350 #ifdef CONFIG_SYS_NO_FLASH
 351 #ifndef CONFIG_RAMBOOT_PBL
 352 #define CONFIG_ENV_IS_NOWHERE
 353 #endif
 354 #else
 355 #define CONFIG_FLASH_CFI_DRIVER
 356 #define CONFIG_SYS_FLASH_CFI
 357 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 358 #endif
 359
 360 #if defined(CONFIG_SPIFLASH)
 361 #define CONFIG_SYS_EXTRA_ENV_RELOC
 362 #define CONFIG_ENV_IS_IN_SPI_FLASH
 363 #define CONFIG_ENV_SPI_BUS              0
 364 #define CONFIG_ENV_SPI_CS               0
 365 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 366 #define CONFIG_ENV_SPI_MODE             0
 367 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 368 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 369 #define CONFIG_ENV_SECT_SIZE            0x10000
 370 #elif defined(CONFIG_SDCARD)
 371 #define CONFIG_SYS_EXTRA_ENV_RELOC
 372 #define CONFIG_ENV_IS_IN_MMC
 373 #define CONFIG_SYS_MMC_ENV_DEV          0
 374 #define CONFIG_ENV_SIZE                 0x2000
 375 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 376 #elif defined(CONFIG_NAND)
 377 #define CONFIG_SYS_EXTRA_ENV_RELOC
 378 #define CONFIG_ENV_IS_IN_NAND
 379 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 380 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 381 #elif defined(CONFIG_ENV_IS_NOWHERE)
 382 #define CONFIG_ENV_SIZE         0x2000
 383 #else
 384 #define CONFIG_ENV_IS_IN_FLASH
 385 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 386 #define CONFIG_ENV_SIZE         0x2000
 387 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 388 #endif
 389
 390 #define CONFIG_SYS_CLK_FREQ     66666666
 391 #define CONFIG_DDR_CLK_FREQ     133333333
 392
 393 #ifndef __ASSEMBLY__
 394 unsigned long get_board_sys_clk(void);
 395 unsigned long get_board_ddr_clk(void);
 396 #endif
 397
 398 /*
 399  * DDR Setup
 400  */
 401 #define CONFIG_SYS_SPD_BUS_NUM  0
 402 #define SPD_EEPROM_ADDRESS1     0x52
 403 #define SPD_EEPROM_ADDRESS2     0x54
 404 #define SPD_EEPROM_ADDRESS3     0x56
 405 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 406 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 407
 408 /*
 409  * IFC Definitions
 410  */
 411 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 412 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 413                                 + 0x8000000) | \
 414                                 CSPR_PORT_SIZE_16 | \
 415                                 CSPR_MSEL_NOR | \
 416                                 CSPR_V)
 417 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 418 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 419                                 CSPR_PORT_SIZE_16 | \
 420                                 CSPR_MSEL_NOR | \
 421                                 CSPR_V)
 422 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 423 /* NOR Flash Timing Params */
 424 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 425
 426 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 427                                 FTIM0_NOR_TEADC(0x5) | \
 428                                 FTIM0_NOR_TEAHC(0x5))
 429 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 430                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 431                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 432 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 433                                 FTIM2_NOR_TCH(0x4) | \
 434                                 FTIM2_NOR_TWPH(0x0E) | \
 435                                 FTIM2_NOR_TWP(0x1c))
 436 #define CONFIG_SYS_NOR_FTIM3    0x0
 437
 438 #define CONFIG_SYS_FLASH_QUIET_TEST
 439 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 440
 441 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 442 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 443 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 444 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 445
 446 #define CONFIG_SYS_FLASH_EMPTY_INFO
 447 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 448                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 449
 450 /* NAND Flash on IFC */
 451 #define CONFIG_NAND_FSL_IFC
 452 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 453 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 454 #define CONFIG_SYS_NAND_BASE            0xff800000
 455 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 456
 457 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 458 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 459                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 460                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 461                                 | CSPR_V)
 462 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 463
 464 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 465                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 466                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 467                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 468                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 469                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 470                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 471
 472 #define CONFIG_SYS_NAND_ONFI_DETECTION
 473
 474 /* ONFI NAND Flash mode0 Timing Params */
 475 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 476                                         FTIM0_NAND_TWP(0x18)   | \
 477                                         FTIM0_NAND_TWCHT(0x07) | \
 478                                         FTIM0_NAND_TWH(0x0a))
 479 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 480                                         FTIM1_NAND_TWBE(0x39)  | \
 481                                         FTIM1_NAND_TRR(0x0e)   | \
 482                                         FTIM1_NAND_TRP(0x18))
 483 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 484                                         FTIM2_NAND_TREH(0x0a) | \
 485                                         FTIM2_NAND_TWHRE(0x1e))
 486 #define CONFIG_SYS_NAND_FTIM3           0x0
 487
 488 #define CONFIG_SYS_NAND_DDR_LAW         11
 489 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 490 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 491 #define CONFIG_CMD_NAND
 492
 493 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 494
 495 #if defined(CONFIG_NAND)
 496 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 497 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 498 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 499 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 500 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 501 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 502 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 503 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 504 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 505 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 506 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 507 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 508 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 509 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 510 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 511 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 512 #else
 513 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 514 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 515 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 516 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 517 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 518 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 519 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 520 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 521 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 522 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 523 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 524 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 525 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 526 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 527 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 528 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 529 #endif
 530 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 531 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 532 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 533 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 534 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 535 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 536 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 537 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 538
 539 /* CPLD on IFC */
 540 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 541 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 542 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 543 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 544                                 | CSPR_PORT_SIZE_8 \
 545                                 | CSPR_MSEL_GPCM \
 546                                 | CSPR_V)
 547
 548 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 549 #define CONFIG_SYS_CSOR3        0x0
 550
 551 /* CPLD Timing parameters for IFC CS3 */
 552 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 553                                         FTIM0_GPCM_TEADC(0x0e) | \
 554                                         FTIM0_GPCM_TEAHC(0x0e))
 555 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 556                                         FTIM1_GPCM_TRAD(0x1f))
 557 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 558                                         FTIM2_GPCM_TCH(0x8) | \
 559                                         FTIM2_GPCM_TWP(0x1f))
 560 #define CONFIG_SYS_CS3_FTIM3            0x0
 561
 562 #if defined(CONFIG_RAMBOOT_PBL)
 563 #define CONFIG_SYS_RAMBOOT
 564 #endif
 565
 566 /* I2C */
 567 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 568 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 569 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 570 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 571
 572 #define I2C_MUX_CH_DEFAULT      0x8
 573 #define I2C_MUX_CH_VOL_MONITOR  0xa
 574 #define I2C_MUX_CH_VSC3316_FS   0xc
 575 #define I2C_MUX_CH_VSC3316_BS   0xd
 576
 577 /* Voltage monitor on channel 2*/
 578 #define I2C_VOL_MONITOR_ADDR            0x40
 579 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 580 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 581 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 582
 583 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 584 #ifndef CONFIG_SPL_BUILD
 585 #define CONFIG_VID
 586 #endif
 587 #define CONFIG_VOL_MONITOR_IR36021_SET
 588 #define CONFIG_VOL_MONITOR_IR36021_READ
 589 /* The lowest and highest voltage allowed for T4240RDB */
 590 #define VDD_MV_MIN                      819
 591 #define VDD_MV_MAX                      1212
 592
 593 /*
 594  * eSPI - Enhanced SPI
 595  */
 596 #define CONFIG_SF_DEFAULT_SPEED         10000000
 597 #define CONFIG_SF_DEFAULT_MODE          0
 598
 599 /* Qman/Bman */
 600 #ifndef CONFIG_NOBQFMAN
 601 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 602 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 603 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 604 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 605 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 606 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 607 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 608 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 609 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 610 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 611                                         CONFIG_SYS_BMAN_CENA_SIZE)
 612 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 613 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 614 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 615 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 616 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 617 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 618 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 619 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 620 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 621 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 622 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 623                                         CONFIG_SYS_QMAN_CENA_SIZE)
 624 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 626
 627 #define CONFIG_SYS_DPAA_FMAN
 628 #define CONFIG_SYS_DPAA_PME
 629 #define CONFIG_SYS_PMAN
 630 #define CONFIG_SYS_DPAA_DCE
 631 #define CONFIG_SYS_DPAA_RMAN
 632 #define CONFIG_SYS_INTERLAKEN
 633
 634 /* Default address of microcode for the Linux Fman driver */
 635 #if defined(CONFIG_SPIFLASH)
 636 /*
 637  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 638  * env, so we got 0x110000.
 639  */
 640 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 641 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 642 #elif defined(CONFIG_SDCARD)
 643 /*
 644  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 645  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 646  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 647  */
 648 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 649 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 650 #elif defined(CONFIG_NAND)
 651 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 652 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 653 #else
 654 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 655 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 656 #endif
 657 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 658 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 659 #endif /* CONFIG_NOBQFMAN */
 660
 661 #ifdef CONFIG_SYS_DPAA_FMAN
 662 #define CONFIG_FMAN_ENET
 663 #define CONFIG_PHYLIB_10G
 664 #define CONFIG_PHY_VITESSE
 665 #define CONFIG_PHY_CORTINA
 666 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 667 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 668 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 669 #define CONFIG_PHY_TERANETICS
 670 #define SGMII_PHY_ADDR1 0x0
 671 #define SGMII_PHY_ADDR2 0x1
 672 #define SGMII_PHY_ADDR3 0x2
 673 #define SGMII_PHY_ADDR4 0x3
 674 #define SGMII_PHY_ADDR5 0x4
 675 #define SGMII_PHY_ADDR6 0x5
 676 #define SGMII_PHY_ADDR7 0x6
 677 #define SGMII_PHY_ADDR8 0x7
 678 #define FM1_10GEC1_PHY_ADDR     0x10
 679 #define FM1_10GEC2_PHY_ADDR     0x11
 680 #define FM2_10GEC1_PHY_ADDR     0x12
 681 #define FM2_10GEC2_PHY_ADDR     0x13
 682 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 683 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 684 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 685 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 686 #endif
 687
 688 /* SATA */
 689 #ifdef CONFIG_FSL_SATA_V2
 690 #define CONFIG_LIBATA
 691 #define CONFIG_FSL_SATA
 692
 693 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 694 #define CONFIG_SATA1
 695 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 696 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 697 #define CONFIG_SATA2
 698 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 699 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 700
 701 #define CONFIG_LBA48
 702 #define CONFIG_CMD_SATA
 703 #define CONFIG_DOS_PARTITION
 704 #endif
 705
 706 #ifdef CONFIG_FMAN_ENET
 707 #define CONFIG_MII              /* MII PHY management */
 708 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 709 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 710 #endif
 711
 712 /*
 713 * USB
 714 */
 715 #define CONFIG_USB_EHCI
 716 #define CONFIG_USB_EHCI_FSL
 717 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 718 #define CONFIG_HAS_FSL_DR_USB
 719
 720 #define CONFIG_MMC
 721
 722 #ifdef CONFIG_MMC
 723 #define CONFIG_FSL_ESDHC
 724 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 725 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 726 #define CONFIG_GENERIC_MMC
 727 #define CONFIG_DOS_PARTITION
 728 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 729 #endif
 730
 731 /* Hash command with SHA acceleration supported in hardware */
 732 #ifdef CONFIG_FSL_CAAM
 733 #define CONFIG_CMD_HASH
 734 #define CONFIG_SHA_HW_ACCEL
 735 #endif
 736
 737
 738 #define __USB_PHY_TYPE  utmi
 739
 740 /*
 741  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 742  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 743  * interleaving. It can be cacheline, page, bank, superbank.
 744  * See doc/README.fsl-ddr for details.
 745  */
 746 #ifdef CONFIG_PPC_T4240
 747 #define CTRL_INTLV_PREFERED 3way_4KB
 748 #else
 749 #define CTRL_INTLV_PREFERED cacheline
 750 #endif
 751
 752 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 753         "hwconfig=fsl_ddr:"                                     \
 754         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 755         "bank_intlv=auto;"                                      \
 756         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 757         "netdev=eth0\0"                                         \
 758         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 759         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 760         "tftpflash=tftpboot $loadaddr $uboot && "               \
 761         "protect off $ubootaddr +$filesize && "                 \
 762         "erase $ubootaddr +$filesize && "                       \
 763         "cp.b $loadaddr $ubootaddr $filesize && "               \
 764         "protect on $ubootaddr +$filesize && "                  \
 765         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 766         "consoledev=ttyS0\0"                                    \
 767         "ramdiskaddr=2000000\0"                                 \
 768         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 769         "fdtaddr=1e00000\0"                                     \
 770         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 771         "bdev=sda3\0"
 772
 773 #define CONFIG_HVBOOT                                   \
 774         "setenv bootargs config-addr=0x60000000; "      \
 775         "bootm 0x01000000 - 0x00f00000"
 776
 777 #define CONFIG_LINUX                                    \
 778         "setenv bootargs root=/dev/ram rw "             \
 779         "console=$consoledev,$baudrate $othbootargs;"   \
 780         "setenv ramdiskaddr 0x02000000;"                \
 781         "setenv fdtaddr 0x00c00000;"                    \
 782         "setenv loadaddr 0x1000000;"                    \
 783         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 784
 785 #define CONFIG_HDBOOT                                   \
 786         "setenv bootargs root=/dev/$bdev rw "           \
 787         "console=$consoledev,$baudrate $othbootargs;"   \
 788         "tftp $loadaddr $bootfile;"                     \
 789         "tftp $fdtaddr $fdtfile;"                       \
 790         "bootm $loadaddr - $fdtaddr"
 791
 792 #define CONFIG_NFSBOOTCOMMAND                   \
 793         "setenv bootargs root=/dev/nfs rw "     \
 794         "nfsroot=$serverip:$rootpath "          \
 795         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 796         "console=$consoledev,$baudrate $othbootargs;"   \
 797         "tftp $loadaddr $bootfile;"             \
 798         "tftp $fdtaddr $fdtfile;"               \
 799         "bootm $loadaddr - $fdtaddr"
 800
 801 #define CONFIG_RAMBOOTCOMMAND                           \
 802         "setenv bootargs root=/dev/ram rw "             \
 803         "console=$consoledev,$baudrate $othbootargs;"   \
 804         "tftp $ramdiskaddr $ramdiskfile;"               \
 805         "tftp $loadaddr $bootfile;"                     \
 806         "tftp $fdtaddr $fdtfile;"                       \
 807         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 808
 809 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 810
 811 #include <asm/fsl_secure_boot.h>
 812
 813 #endif  /* __CONFIG_H */