config: remove unused CONFIG_SPL_RELOC_STACK_SIZE
[platform/kernel/u-boot.git] / include / configs / T4240RDB.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2014 Freescale Semiconductor, Inc.
4  */
5
6 /*
7  * T4240 RDB board configuration file
8  */
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_FSL_SATA_V2
13 #define CONFIG_PCIE4
14
15 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
16
17 #ifdef CONFIG_RAMBOOT_PBL
18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
19 #ifndef CONFIG_SDCARD
20 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
21 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
22 #else
23 #define CONFIG_SPL_FLUSH_IMAGE
24 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
25 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
26 #define CONFIG_SPL_PAD_TO               0x40000
27 #define CONFIG_SPL_MAX_SIZE             0x28000
28 #define RESET_VECTOR_OFFSET             0x27FFC
29 #define BOOT_PAGE_OFFSET                0x27000
30
31 #ifdef  CONFIG_SDCARD
32 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
33 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
34 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
35 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
36 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
37 #ifndef CONFIG_SPL_BUILD
38 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
39 #endif
40 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
41 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
42 #define CONFIG_SPL_MMC_BOOT
43 #endif
44
45 #ifdef CONFIG_SPL_BUILD
46 #define CONFIG_SPL_SKIP_RELOCATE
47 #define CONFIG_SPL_COMMON_INIT_DDR
48 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
49 #endif
50
51 #endif
52 #endif /* CONFIG_RAMBOOT_PBL */
53
54 #define CONFIG_DDR_ECC
55
56 /* High Level Configuration Options */
57 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
58
59 #ifndef CONFIG_RESET_VECTOR_ADDRESS
60 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
61 #endif
62
63 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
64 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
65 #define CONFIG_PCIE1                    /* PCIE controller 1 */
66 #define CONFIG_PCIE2                    /* PCIE controller 2 */
67 #define CONFIG_PCIE3                    /* PCIE controller 3 */
68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
70
71 #define CONFIG_ENV_OVERWRITE
72
73 /*
74  * These can be toggled for performance analysis, otherwise use default.
75  */
76 #define CONFIG_SYS_CACHE_STASHING
77 #define CONFIG_BTB                      /* toggle branch predition */
78 #ifdef CONFIG_DDR_ECC
79 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
80 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
81 #endif
82
83 #define CONFIG_ENABLE_36BIT_PHYS
84
85 #define CONFIG_ADDR_MAP
86 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
87
88 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
89 #define CONFIG_SYS_MEMTEST_END          0x00400000
90
91 /*
92  *  Config the L3 Cache as L3 SRAM
93  */
94 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
95 #define CONFIG_SYS_L3_SIZE              (512 << 10)
96 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
97 #ifdef CONFIG_RAMBOOT_PBL
98 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
99 #endif
100 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
101 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
102 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
103
104 #define CONFIG_SYS_DCSRBAR              0xf0000000
105 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
106
107 /*
108  * DDR Setup
109  */
110 #define CONFIG_VERY_BIG_RAM
111 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
112 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
113
114 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
115 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
116 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
117
118 #define CONFIG_DDR_SPD
119
120 /*
121  * IFC Definitions
122  */
123 #define CONFIG_SYS_FLASH_BASE   0xe0000000
124 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
125
126 #ifdef CONFIG_SPL_BUILD
127 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
128 #else
129 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
130 #endif
131
132 #define CONFIG_MISC_INIT_R
133
134 #define CONFIG_HWCONFIG
135
136 /* define to use L1 as initial stack */
137 #define CONFIG_L1_INIT_RAM
138 #define CONFIG_SYS_INIT_RAM_LOCK
139 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
140 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
141 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
142 /* The assembler doesn't like typecast */
143 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
144         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
145           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
146 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
147
148 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
149                                         GENERATED_GBL_DATA_SIZE)
150 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
151
152 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
153 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
154
155 /* Serial Port - controlled on board with jumper J8
156  * open - index 2
157  * shorted - index 1
158  */
159 #define CONFIG_SYS_NS16550_SERIAL
160 #define CONFIG_SYS_NS16550_REG_SIZE     1
161 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
162
163 #define CONFIG_SYS_BAUDRATE_TABLE       \
164         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
165
166 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
167 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
168 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
169 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
170
171 /* I2C */
172 #define CONFIG_SYS_I2C
173 #define CONFIG_SYS_I2C_FSL
174 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
175 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
176 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
177 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
178
179 /*
180  * General PCI
181  * Memory space is mapped 1-1, but I/O space must start from 0.
182  */
183
184 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
185 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
186 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
187 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
188 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
189 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
190 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
191 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
192 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
193
194 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
195 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
196 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
197 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
198 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
199 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
200 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
201 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
202 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
203
204 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
205 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
206 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
207 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
208 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
209 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
210 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
211 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
212 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
213
214 /* controller 4, Base address 203000 */
215 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
216 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
217 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
218 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
219 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
220 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
221
222 #ifdef CONFIG_PCI
223 #define CONFIG_PCI_INDIRECT_BRIDGE
224
225 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
226 #endif  /* CONFIG_PCI */
227
228 /* SATA */
229 #ifdef CONFIG_FSL_SATA_V2
230 #define CONFIG_SYS_SATA_MAX_DEVICE      2
231 #define CONFIG_SATA1
232 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
233 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
234 #define CONFIG_SATA2
235 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
236 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
237
238 #define CONFIG_LBA48
239 #endif
240
241 #ifdef CONFIG_FMAN_ENET
242 #define CONFIG_MII              /* MII PHY management */
243 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
244 #endif
245
246 /*
247  * Environment
248  */
249 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
250 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
251
252 /*
253  * Command line configuration.
254  */
255
256 /*
257  * Miscellaneous configurable options
258  */
259 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
260
261 /*
262  * For booting Linux, the board info and command line data
263  * have to be in the first 64 MB of memory, since this is
264  * the maximum mapped by the Linux kernel during initialization.
265  */
266 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
267 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
268
269 #ifdef CONFIG_CMD_KGDB
270 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
271 #endif
272
273 /*
274  * Environment Configuration
275  */
276 #define CONFIG_ROOTPATH         "/opt/nfsroot"
277 #define CONFIG_BOOTFILE         "uImage"
278 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
279
280 /* default location for tftp and bootm */
281 #define CONFIG_LOADADDR         1000000
282
283 #define CONFIG_HVBOOT                                   \
284         "setenv bootargs config-addr=0x60000000; "      \
285         "bootm 0x01000000 - 0x00f00000"
286
287 #ifndef CONFIG_MTD_NOR_FLASH
288 #else
289 #define CONFIG_FLASH_CFI_DRIVER
290 #define CONFIG_SYS_FLASH_CFI
291 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
292 #endif
293
294 #if defined(CONFIG_SPIFLASH)
295 #define CONFIG_SYS_EXTRA_ENV_RELOC
296 #define CONFIG_ENV_SPI_BUS              0
297 #define CONFIG_ENV_SPI_CS               0
298 #define CONFIG_ENV_SPI_MAX_HZ           10000000
299 #define CONFIG_ENV_SPI_MODE             0
300 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
301 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
302 #define CONFIG_ENV_SECT_SIZE            0x10000
303 #elif defined(CONFIG_SDCARD)
304 #define CONFIG_SYS_EXTRA_ENV_RELOC
305 #define CONFIG_SYS_MMC_ENV_DEV          0
306 #define CONFIG_ENV_SIZE                 0x2000
307 #define CONFIG_ENV_OFFSET               (512 * 0x800)
308 #elif defined(CONFIG_NAND)
309 #define CONFIG_SYS_EXTRA_ENV_RELOC
310 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
311 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
312 #elif defined(CONFIG_ENV_IS_NOWHERE)
313 #define CONFIG_ENV_SIZE         0x2000
314 #else
315 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
316 #define CONFIG_ENV_SIZE         0x2000
317 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
318 #endif
319
320 #define CONFIG_SYS_CLK_FREQ     66666666
321 #define CONFIG_DDR_CLK_FREQ     133333333
322
323 #ifndef __ASSEMBLY__
324 unsigned long get_board_sys_clk(void);
325 unsigned long get_board_ddr_clk(void);
326 #endif
327
328 /*
329  * DDR Setup
330  */
331 #define CONFIG_SYS_SPD_BUS_NUM  0
332 #define SPD_EEPROM_ADDRESS1     0x52
333 #define SPD_EEPROM_ADDRESS2     0x54
334 #define SPD_EEPROM_ADDRESS3     0x56
335 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
336 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
337
338 /*
339  * IFC Definitions
340  */
341 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
342 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
343                                 + 0x8000000) | \
344                                 CSPR_PORT_SIZE_16 | \
345                                 CSPR_MSEL_NOR | \
346                                 CSPR_V)
347 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
348 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
349                                 CSPR_PORT_SIZE_16 | \
350                                 CSPR_MSEL_NOR | \
351                                 CSPR_V)
352 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
353 /* NOR Flash Timing Params */
354 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
355
356 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
357                                 FTIM0_NOR_TEADC(0x5) | \
358                                 FTIM0_NOR_TEAHC(0x5))
359 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
360                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
361                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
362 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
363                                 FTIM2_NOR_TCH(0x4) | \
364                                 FTIM2_NOR_TWPH(0x0E) | \
365                                 FTIM2_NOR_TWP(0x1c))
366 #define CONFIG_SYS_NOR_FTIM3    0x0
367
368 #define CONFIG_SYS_FLASH_QUIET_TEST
369 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
370
371 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
372 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
373 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
374 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
375
376 #define CONFIG_SYS_FLASH_EMPTY_INFO
377 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
378                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
379
380 /* NAND Flash on IFC */
381 #define CONFIG_NAND_FSL_IFC
382 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
383 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
384 #define CONFIG_SYS_NAND_BASE            0xff800000
385 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
386
387 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
388 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
389                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
390                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
391                                 | CSPR_V)
392 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
393
394 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
395                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
396                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
397                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
398                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
399                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
400                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
401
402 #define CONFIG_SYS_NAND_ONFI_DETECTION
403
404 /* ONFI NAND Flash mode0 Timing Params */
405 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
406                                         FTIM0_NAND_TWP(0x18)   | \
407                                         FTIM0_NAND_TWCHT(0x07) | \
408                                         FTIM0_NAND_TWH(0x0a))
409 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
410                                         FTIM1_NAND_TWBE(0x39)  | \
411                                         FTIM1_NAND_TRR(0x0e)   | \
412                                         FTIM1_NAND_TRP(0x18))
413 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
414                                         FTIM2_NAND_TREH(0x0a) | \
415                                         FTIM2_NAND_TWHRE(0x1e))
416 #define CONFIG_SYS_NAND_FTIM3           0x0
417
418 #define CONFIG_SYS_NAND_DDR_LAW         11
419 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
420 #define CONFIG_SYS_MAX_NAND_DEVICE      1
421
422 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
423
424 #if defined(CONFIG_NAND)
425 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
426 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
427 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
428 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
429 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
430 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
431 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
432 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
433 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
434 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
435 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
436 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
437 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
438 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
439 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
440 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
441 #else
442 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
443 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
444 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
445 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
446 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
447 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
448 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
449 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
450 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
451 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
452 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
453 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
454 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
455 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
456 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
457 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
458 #endif
459 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
460 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
461 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
462 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
463 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
464 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
465 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
466 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
467
468 /* CPLD on IFC */
469 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
470 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
471 #define CONFIG_SYS_CSPR3_EXT    (0xf)
472 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
473                                 | CSPR_PORT_SIZE_8 \
474                                 | CSPR_MSEL_GPCM \
475                                 | CSPR_V)
476
477 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
478 #define CONFIG_SYS_CSOR3        0x0
479
480 /* CPLD Timing parameters for IFC CS3 */
481 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
482                                         FTIM0_GPCM_TEADC(0x0e) | \
483                                         FTIM0_GPCM_TEAHC(0x0e))
484 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
485                                         FTIM1_GPCM_TRAD(0x1f))
486 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
487                                         FTIM2_GPCM_TCH(0x8) | \
488                                         FTIM2_GPCM_TWP(0x1f))
489 #define CONFIG_SYS_CS3_FTIM3            0x0
490
491 #if defined(CONFIG_RAMBOOT_PBL)
492 #define CONFIG_SYS_RAMBOOT
493 #endif
494
495 /* I2C */
496 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
497 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
498 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
499 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
500
501 #define I2C_MUX_CH_DEFAULT      0x8
502 #define I2C_MUX_CH_VOL_MONITOR  0xa
503 #define I2C_MUX_CH_VSC3316_FS   0xc
504 #define I2C_MUX_CH_VSC3316_BS   0xd
505
506 /* Voltage monitor on channel 2*/
507 #define I2C_VOL_MONITOR_ADDR            0x40
508 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
509 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
510 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
511
512 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
513 #ifndef CONFIG_SPL_BUILD
514 #define CONFIG_VID
515 #endif
516 #define CONFIG_VOL_MONITOR_IR36021_SET
517 #define CONFIG_VOL_MONITOR_IR36021_READ
518 /* The lowest and highest voltage allowed for T4240RDB */
519 #define VDD_MV_MIN                      819
520 #define VDD_MV_MAX                      1212
521
522 /*
523  * eSPI - Enhanced SPI
524  */
525 #define CONFIG_SF_DEFAULT_SPEED         10000000
526 #define CONFIG_SF_DEFAULT_MODE          0
527
528 /* Qman/Bman */
529 #ifndef CONFIG_NOBQFMAN
530 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
531 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
532 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
533 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
534 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
535 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
536 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
537 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
538 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
539                                         CONFIG_SYS_BMAN_CENA_SIZE)
540 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
541 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
542 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
543 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
544 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
545 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
546 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
547 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
548 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
549 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
550 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
551                                         CONFIG_SYS_QMAN_CENA_SIZE)
552 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
553 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
554
555 #define CONFIG_SYS_DPAA_FMAN
556 #define CONFIG_SYS_DPAA_PME
557 #define CONFIG_SYS_PMAN
558 #define CONFIG_SYS_DPAA_DCE
559 #define CONFIG_SYS_DPAA_RMAN
560 #define CONFIG_SYS_INTERLAKEN
561
562 /* Default address of microcode for the Linux Fman driver */
563 #if defined(CONFIG_SPIFLASH)
564 /*
565  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
566  * env, so we got 0x110000.
567  */
568 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
569 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
570 #elif defined(CONFIG_SDCARD)
571 /*
572  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
573  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
574  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
575  */
576 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
577 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
578 #elif defined(CONFIG_NAND)
579 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
580 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
581 #else
582 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
583 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
584 #endif
585 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
586 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
587 #endif /* CONFIG_NOBQFMAN */
588
589 #ifdef CONFIG_SYS_DPAA_FMAN
590 #define CONFIG_FMAN_ENET
591 #define CONFIG_PHYLIB_10G
592 #define CONFIG_PHY_VITESSE
593 #define CONFIG_PHY_CORTINA
594 #define CONFIG_SYS_CORTINA_FW_IN_NOR
595 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
596 #define CONFIG_CORTINA_FW_LENGTH        0x40000
597 #define CONFIG_PHY_TERANETICS
598 #define SGMII_PHY_ADDR1 0x0
599 #define SGMII_PHY_ADDR2 0x1
600 #define SGMII_PHY_ADDR3 0x2
601 #define SGMII_PHY_ADDR4 0x3
602 #define SGMII_PHY_ADDR5 0x4
603 #define SGMII_PHY_ADDR6 0x5
604 #define SGMII_PHY_ADDR7 0x6
605 #define SGMII_PHY_ADDR8 0x7
606 #define FM1_10GEC1_PHY_ADDR     0x10
607 #define FM1_10GEC2_PHY_ADDR     0x11
608 #define FM2_10GEC1_PHY_ADDR     0x12
609 #define FM2_10GEC2_PHY_ADDR     0x13
610 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
611 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
612 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
613 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
614 #endif
615
616 /* SATA */
617 #ifdef CONFIG_FSL_SATA_V2
618 #define CONFIG_SYS_SATA_MAX_DEVICE      2
619 #define CONFIG_SATA1
620 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
621 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
622 #define CONFIG_SATA2
623 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
624 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
625
626 #define CONFIG_LBA48
627 #endif
628
629 #ifdef CONFIG_FMAN_ENET
630 #define CONFIG_MII              /* MII PHY management */
631 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
632 #endif
633
634 /*
635 * USB
636 */
637 #define CONFIG_USB_EHCI_FSL
638 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
639 #define CONFIG_HAS_FSL_DR_USB
640
641 #ifdef CONFIG_MMC
642 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
643 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
644 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
645 #endif
646
647
648 #define __USB_PHY_TYPE  utmi
649
650 /*
651  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
652  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
653  * interleaving. It can be cacheline, page, bank, superbank.
654  * See doc/README.fsl-ddr for details.
655  */
656 #ifdef CONFIG_ARCH_T4240
657 #define CTRL_INTLV_PREFERED 3way_4KB
658 #else
659 #define CTRL_INTLV_PREFERED cacheline
660 #endif
661
662 #define CONFIG_EXTRA_ENV_SETTINGS                               \
663         "hwconfig=fsl_ddr:"                                     \
664         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
665         "bank_intlv=auto;"                                      \
666         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
667         "netdev=eth0\0"                                         \
668         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
669         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
670         "tftpflash=tftpboot $loadaddr $uboot && "               \
671         "protect off $ubootaddr +$filesize && "                 \
672         "erase $ubootaddr +$filesize && "                       \
673         "cp.b $loadaddr $ubootaddr $filesize && "               \
674         "protect on $ubootaddr +$filesize && "                  \
675         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
676         "consoledev=ttyS0\0"                                    \
677         "ramdiskaddr=2000000\0"                                 \
678         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
679         "fdtaddr=1e00000\0"                                     \
680         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
681         "bdev=sda3\0"
682
683 #define CONFIG_HVBOOT                                   \
684         "setenv bootargs config-addr=0x60000000; "      \
685         "bootm 0x01000000 - 0x00f00000"
686
687 #define CONFIG_LINUX                                    \
688         "setenv bootargs root=/dev/ram rw "             \
689         "console=$consoledev,$baudrate $othbootargs;"   \
690         "setenv ramdiskaddr 0x02000000;"                \
691         "setenv fdtaddr 0x00c00000;"                    \
692         "setenv loadaddr 0x1000000;"                    \
693         "bootm $loadaddr $ramdiskaddr $fdtaddr"
694
695 #define CONFIG_HDBOOT                                   \
696         "setenv bootargs root=/dev/$bdev rw "           \
697         "console=$consoledev,$baudrate $othbootargs;"   \
698         "tftp $loadaddr $bootfile;"                     \
699         "tftp $fdtaddr $fdtfile;"                       \
700         "bootm $loadaddr - $fdtaddr"
701
702 #define CONFIG_NFSBOOTCOMMAND                   \
703         "setenv bootargs root=/dev/nfs rw "     \
704         "nfsroot=$serverip:$rootpath "          \
705         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
706         "console=$consoledev,$baudrate $othbootargs;"   \
707         "tftp $loadaddr $bootfile;"             \
708         "tftp $fdtaddr $fdtfile;"               \
709         "bootm $loadaddr - $fdtaddr"
710
711 #define CONFIG_RAMBOOTCOMMAND                           \
712         "setenv bootargs root=/dev/ram rw "             \
713         "console=$consoledev,$baudrate $othbootargs;"   \
714         "tftp $ramdiskaddr $ramdiskfile;"               \
715         "tftp $loadaddr $bootfile;"                     \
716         "tftp $fdtaddr $fdtfile;"                       \
717         "bootm $loadaddr $ramdiskaddr $fdtaddr"
718
719 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
720
721 #include <asm/fsl_secure_boot.h>
722
723 #endif  /* __CONFIG_H */