include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #define CONFIG_FSL_SATA_V2
  18 #define CONFIG_PCIE4
  19
  20 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  21
  22 #ifdef CONFIG_RAMBOOT_PBL
  23 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  24 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  25 #ifndef CONFIG_SDCARD
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #else
  29 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  30 #define CONFIG_SPL_ENV_SUPPORT
  31 #define CONFIG_SPL_SERIAL_SUPPORT
  32 #define CONFIG_SPL_FLUSH_IMAGE
  33 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  34 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  35 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  36 #define CONFIG_SPL_I2C_SUPPORT
  37 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  38 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  39 #define CONFIG_SYS_TEXT_BASE            0x00201000
  40 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  41 #define CONFIG_SPL_PAD_TO               0x40000
  42 #define CONFIG_SPL_MAX_SIZE             0x28000
  43 #define RESET_VECTOR_OFFSET             0x27FFC
  44 #define BOOT_PAGE_OFFSET                0x27000
  45
  46 #ifdef  CONFIG_SDCARD
  47 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  48 #define CONFIG_SPL_MMC_SUPPORT
  49 #define CONFIG_SPL_MMC_MINIMAL
  50 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  51 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  52 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  53 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  54 #ifndef CONFIG_SPL_BUILD
  55 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  56 #endif
  57 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  58 #define CONFIG_SPL_MMC_BOOT
  59 #endif
  60
  61 #ifdef CONFIG_SPL_BUILD
  62 #define CONFIG_SPL_SKIP_RELOCATE
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  65 #define CONFIG_SYS_NO_FLASH
  66 #endif
  67
  68 #endif
  69 #endif /* CONFIG_RAMBOOT_PBL */
  70
  71 #define CONFIG_DDR_ECC
  72
  73 #define CONFIG_CMD_REGINFO
  74
  75 /* High Level Configuration Options */
  76 #define CONFIG_BOOKE
  77 #define CONFIG_E500                     /* BOOKE e500 family */
  78 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  79 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  80 #define CONFIG_MP                       /* support multiple processors */
  81
  82 #ifndef CONFIG_SYS_TEXT_BASE
  83 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  84 #endif
  85
  86 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  87 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  88 #endif
  89
  90 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  91 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  92 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  93 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  94 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  95 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  96 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  97 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  98 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  99 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 100
 101 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 102
 103 #define CONFIG_ENV_OVERWRITE
 104
 105 /*
 106  * These can be toggled for performance analysis, otherwise use default.
 107  */
 108 #define CONFIG_SYS_CACHE_STASHING
 109 #define CONFIG_BTB                      /* toggle branch predition */
 110 #ifdef CONFIG_DDR_ECC
 111 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 112 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 113 #endif
 114
 115 #define CONFIG_ENABLE_36BIT_PHYS
 116
 117 #define CONFIG_ADDR_MAP
 118 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 119
 120 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 121 #define CONFIG_SYS_MEMTEST_END          0x00400000
 122 #define CONFIG_SYS_ALT_MEMTEST
 123 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 124
 125 /*
 126  *  Config the L3 Cache as L3 SRAM
 127  */
 128 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 129 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 130 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 131 #ifdef CONFIG_RAMBOOT_PBL
 132 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 133 #endif
 134 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 135 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 136 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 137 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 138
 139 #define CONFIG_SYS_DCSRBAR              0xf0000000
 140 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 141
 142 /*
 143  * DDR Setup
 144  */
 145 #define CONFIG_VERY_BIG_RAM
 146 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 147 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 148
 149 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 150 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 151 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 152 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 153
 154 #define CONFIG_DDR_SPD
 155 #define CONFIG_SYS_FSL_DDR3
 156
 157 /*
 158  * IFC Definitions
 159  */
 160 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 161 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 162
 163 #ifdef CONFIG_SPL_BUILD
 164 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 165 #else
 166 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 167 #endif
 168
 169 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 170 #define CONFIG_MISC_INIT_R
 171
 172 #define CONFIG_HWCONFIG
 173
 174 /* define to use L1 as initial stack */
 175 #define CONFIG_L1_INIT_RAM
 176 #define CONFIG_SYS_INIT_RAM_LOCK
 177 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 178 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 179 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 180 /* The assembler doesn't like typecast */
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 182         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 183           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 184 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 185
 186 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 187                                         GENERATED_GBL_DATA_SIZE)
 188 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 189
 190 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 191 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 192
 193 /* Serial Port - controlled on board with jumper J8
 194  * open - index 2
 195  * shorted - index 1
 196  */
 197 #define CONFIG_CONS_INDEX       1
 198 #define CONFIG_SYS_NS16550_SERIAL
 199 #define CONFIG_SYS_NS16550_REG_SIZE     1
 200 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 201
 202 #define CONFIG_SYS_BAUDRATE_TABLE       \
 203         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 204
 205 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 206 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 207 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 208 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 209
 210 /* I2C */
 211 #define CONFIG_SYS_I2C
 212 #define CONFIG_SYS_I2C_FSL
 213 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 214 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 215 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 216 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 217
 218 /*
 219  * General PCI
 220  * Memory space is mapped 1-1, but I/O space must start from 0.
 221  */
 222
 223 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 224 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 225 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 226 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 227 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 228 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 229 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 230 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 231 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 232
 233 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 234 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 235 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 236 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 237 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 238 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 239 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 240 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 241 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 242
 243 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 244 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 245 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 246 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 247 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 248 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 249 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 250 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 251 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 252
 253 /* controller 4, Base address 203000 */
 254 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 255 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 256 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 257 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 258 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 259 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 260
 261 #ifdef CONFIG_PCI
 262 #define CONFIG_PCI_INDIRECT_BRIDGE
 263 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 264
 265 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 266 #define CONFIG_DOS_PARTITION
 267 #endif  /* CONFIG_PCI */
 268
 269 /* SATA */
 270 #ifdef CONFIG_FSL_SATA_V2
 271 #define CONFIG_LIBATA
 272 #define CONFIG_FSL_SATA
 273
 274 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 275 #define CONFIG_SATA1
 276 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 277 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 278 #define CONFIG_SATA2
 279 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 280 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 281
 282 #define CONFIG_LBA48
 283 #define CONFIG_CMD_SATA
 284 #define CONFIG_DOS_PARTITION
 285 #endif
 286
 287 #ifdef CONFIG_FMAN_ENET
 288 #define CONFIG_MII              /* MII PHY management */
 289 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 290 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 291 #endif
 292
 293 /*
 294  * Environment
 295  */
 296 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 297 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 298
 299 /*
 300  * Command line configuration.
 301  */
 302 #define CONFIG_CMD_ERRATA
 303 #define CONFIG_CMD_IRQ
 304
 305 #ifdef CONFIG_PCI
 306 #define CONFIG_CMD_PCI
 307 #endif
 308
 309 /*
 310  * Miscellaneous configurable options
 311  */
 312 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 313 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 314 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 315 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 316 #ifdef CONFIG_CMD_KGDB
 317 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 318 #else
 319 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 320 #endif
 321 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 322 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 323 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 324
 325 /*
 326  * For booting Linux, the board info and command line data
 327  * have to be in the first 64 MB of memory, since this is
 328  * the maximum mapped by the Linux kernel during initialization.
 329  */
 330 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 331 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 332
 333 #ifdef CONFIG_CMD_KGDB
 334 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 335 #endif
 336
 337 /*
 338  * Environment Configuration
 339  */
 340 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 341 #define CONFIG_BOOTFILE         "uImage"
 342 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 343
 344 /* default location for tftp and bootm */
 345 #define CONFIG_LOADADDR         1000000
 346
 347 #define CONFIG_BAUDRATE 115200
 348
 349 #define CONFIG_HVBOOT                                   \
 350         "setenv bootargs config-addr=0x60000000; "      \
 351         "bootm 0x01000000 - 0x00f00000"
 352
 353 #ifdef CONFIG_SYS_NO_FLASH
 354 #ifndef CONFIG_RAMBOOT_PBL
 355 #define CONFIG_ENV_IS_NOWHERE
 356 #endif
 357 #else
 358 #define CONFIG_FLASH_CFI_DRIVER
 359 #define CONFIG_SYS_FLASH_CFI
 360 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 361 #endif
 362
 363 #if defined(CONFIG_SPIFLASH)
 364 #define CONFIG_SYS_EXTRA_ENV_RELOC
 365 #define CONFIG_ENV_IS_IN_SPI_FLASH
 366 #define CONFIG_ENV_SPI_BUS              0
 367 #define CONFIG_ENV_SPI_CS               0
 368 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 369 #define CONFIG_ENV_SPI_MODE             0
 370 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 371 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 372 #define CONFIG_ENV_SECT_SIZE            0x10000
 373 #elif defined(CONFIG_SDCARD)
 374 #define CONFIG_SYS_EXTRA_ENV_RELOC
 375 #define CONFIG_ENV_IS_IN_MMC
 376 #define CONFIG_SYS_MMC_ENV_DEV          0
 377 #define CONFIG_ENV_SIZE                 0x2000
 378 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 379 #elif defined(CONFIG_NAND)
 380 #define CONFIG_SYS_EXTRA_ENV_RELOC
 381 #define CONFIG_ENV_IS_IN_NAND
 382 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 383 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 384 #elif defined(CONFIG_ENV_IS_NOWHERE)
 385 #define CONFIG_ENV_SIZE         0x2000
 386 #else
 387 #define CONFIG_ENV_IS_IN_FLASH
 388 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 389 #define CONFIG_ENV_SIZE         0x2000
 390 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 391 #endif
 392
 393 #define CONFIG_SYS_CLK_FREQ     66666666
 394 #define CONFIG_DDR_CLK_FREQ     133333333
 395
 396 #ifndef __ASSEMBLY__
 397 unsigned long get_board_sys_clk(void);
 398 unsigned long get_board_ddr_clk(void);
 399 #endif
 400
 401 /*
 402  * DDR Setup
 403  */
 404 #define CONFIG_SYS_SPD_BUS_NUM  0
 405 #define SPD_EEPROM_ADDRESS1     0x52
 406 #define SPD_EEPROM_ADDRESS2     0x54
 407 #define SPD_EEPROM_ADDRESS3     0x56
 408 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 409 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 410
 411 /*
 412  * IFC Definitions
 413  */
 414 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 415 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 416                                 + 0x8000000) | \
 417                                 CSPR_PORT_SIZE_16 | \
 418                                 CSPR_MSEL_NOR | \
 419                                 CSPR_V)
 420 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 421 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 422                                 CSPR_PORT_SIZE_16 | \
 423                                 CSPR_MSEL_NOR | \
 424                                 CSPR_V)
 425 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 426 /* NOR Flash Timing Params */
 427 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 428
 429 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 430                                 FTIM0_NOR_TEADC(0x5) | \
 431                                 FTIM0_NOR_TEAHC(0x5))
 432 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 433                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 434                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 435 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 436                                 FTIM2_NOR_TCH(0x4) | \
 437                                 FTIM2_NOR_TWPH(0x0E) | \
 438                                 FTIM2_NOR_TWP(0x1c))
 439 #define CONFIG_SYS_NOR_FTIM3    0x0
 440
 441 #define CONFIG_SYS_FLASH_QUIET_TEST
 442 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 443
 444 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 445 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 446 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 447 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 448
 449 #define CONFIG_SYS_FLASH_EMPTY_INFO
 450 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 451                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 452
 453 /* NAND Flash on IFC */
 454 #define CONFIG_NAND_FSL_IFC
 455 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 456 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 457 #define CONFIG_SYS_NAND_BASE            0xff800000
 458 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 459
 460 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 461 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 462                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 463                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 464                                 | CSPR_V)
 465 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 466
 467 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 468                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 469                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 470                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 471                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 472                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 473                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 474
 475 #define CONFIG_SYS_NAND_ONFI_DETECTION
 476
 477 /* ONFI NAND Flash mode0 Timing Params */
 478 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 479                                         FTIM0_NAND_TWP(0x18)   | \
 480                                         FTIM0_NAND_TWCHT(0x07) | \
 481                                         FTIM0_NAND_TWH(0x0a))
 482 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 483                                         FTIM1_NAND_TWBE(0x39)  | \
 484                                         FTIM1_NAND_TRR(0x0e)   | \
 485                                         FTIM1_NAND_TRP(0x18))
 486 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 487                                         FTIM2_NAND_TREH(0x0a) | \
 488                                         FTIM2_NAND_TWHRE(0x1e))
 489 #define CONFIG_SYS_NAND_FTIM3           0x0
 490
 491 #define CONFIG_SYS_NAND_DDR_LAW         11
 492 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 493 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 494 #define CONFIG_CMD_NAND
 495
 496 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 497
 498 #if defined(CONFIG_NAND)
 499 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 500 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 501 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 502 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 503 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 504 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 505 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 506 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 507 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 508 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 509 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 510 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 511 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 512 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 513 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 514 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 515 #else
 516 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 517 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 518 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 519 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 520 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 521 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 522 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 523 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 524 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 525 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 526 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 527 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 528 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 529 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 530 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 531 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 532 #endif
 533 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 534 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 535 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 536 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 537 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 538 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 539 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 540 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 541
 542 /* CPLD on IFC */
 543 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 544 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 545 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 546 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 547                                 | CSPR_PORT_SIZE_8 \
 548                                 | CSPR_MSEL_GPCM \
 549                                 | CSPR_V)
 550
 551 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 552 #define CONFIG_SYS_CSOR3        0x0
 553
 554 /* CPLD Timing parameters for IFC CS3 */
 555 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 556                                         FTIM0_GPCM_TEADC(0x0e) | \
 557                                         FTIM0_GPCM_TEAHC(0x0e))
 558 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 559                                         FTIM1_GPCM_TRAD(0x1f))
 560 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 561                                         FTIM2_GPCM_TCH(0x8) | \
 562                                         FTIM2_GPCM_TWP(0x1f))
 563 #define CONFIG_SYS_CS3_FTIM3            0x0
 564
 565 #if defined(CONFIG_RAMBOOT_PBL)
 566 #define CONFIG_SYS_RAMBOOT
 567 #endif
 568
 569 /* I2C */
 570 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 571 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 572 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 573 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 574
 575 #define I2C_MUX_CH_DEFAULT      0x8
 576 #define I2C_MUX_CH_VOL_MONITOR  0xa
 577 #define I2C_MUX_CH_VSC3316_FS   0xc
 578 #define I2C_MUX_CH_VSC3316_BS   0xd
 579
 580 /* Voltage monitor on channel 2*/
 581 #define I2C_VOL_MONITOR_ADDR            0x40
 582 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 583 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 584 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 585
 586 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 587 #ifndef CONFIG_SPL_BUILD
 588 #define CONFIG_VID
 589 #endif
 590 #define CONFIG_VOL_MONITOR_IR36021_SET
 591 #define CONFIG_VOL_MONITOR_IR36021_READ
 592 /* The lowest and highest voltage allowed for T4240RDB */
 593 #define VDD_MV_MIN                      819
 594 #define VDD_MV_MAX                      1212
 595
 596 /*
 597  * eSPI - Enhanced SPI
 598  */
 599 #define CONFIG_SF_DEFAULT_SPEED         10000000
 600 #define CONFIG_SF_DEFAULT_MODE          0
 601
 602 /* Qman/Bman */
 603 #ifndef CONFIG_NOBQFMAN
 604 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 605 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 606 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 607 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 608 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 609 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 610 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 611 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 612 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 613 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 614                                         CONFIG_SYS_BMAN_CENA_SIZE)
 615 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 616 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 617 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 618 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 619 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 620 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 621 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 622 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 623 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 624 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 626                                         CONFIG_SYS_QMAN_CENA_SIZE)
 627 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 628 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 629
 630 #define CONFIG_SYS_DPAA_FMAN
 631 #define CONFIG_SYS_DPAA_PME
 632 #define CONFIG_SYS_PMAN
 633 #define CONFIG_SYS_DPAA_DCE
 634 #define CONFIG_SYS_DPAA_RMAN
 635 #define CONFIG_SYS_INTERLAKEN
 636
 637 /* Default address of microcode for the Linux Fman driver */
 638 #if defined(CONFIG_SPIFLASH)
 639 /*
 640  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 641  * env, so we got 0x110000.
 642  */
 643 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 644 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 645 #elif defined(CONFIG_SDCARD)
 646 /*
 647  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 648  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 649  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 650  */
 651 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 652 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 653 #elif defined(CONFIG_NAND)
 654 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 655 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 656 #else
 657 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 658 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 659 #endif
 660 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 661 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 662 #endif /* CONFIG_NOBQFMAN */
 663
 664 #ifdef CONFIG_SYS_DPAA_FMAN
 665 #define CONFIG_FMAN_ENET
 666 #define CONFIG_PHYLIB_10G
 667 #define CONFIG_PHY_VITESSE
 668 #define CONFIG_PHY_CORTINA
 669 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 670 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 671 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 672 #define CONFIG_PHY_TERANETICS
 673 #define SGMII_PHY_ADDR1 0x0
 674 #define SGMII_PHY_ADDR2 0x1
 675 #define SGMII_PHY_ADDR3 0x2
 676 #define SGMII_PHY_ADDR4 0x3
 677 #define SGMII_PHY_ADDR5 0x4
 678 #define SGMII_PHY_ADDR6 0x5
 679 #define SGMII_PHY_ADDR7 0x6
 680 #define SGMII_PHY_ADDR8 0x7
 681 #define FM1_10GEC1_PHY_ADDR     0x10
 682 #define FM1_10GEC2_PHY_ADDR     0x11
 683 #define FM2_10GEC1_PHY_ADDR     0x12
 684 #define FM2_10GEC2_PHY_ADDR     0x13
 685 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 686 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 687 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 688 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 689 #endif
 690
 691 /* SATA */
 692 #ifdef CONFIG_FSL_SATA_V2
 693 #define CONFIG_LIBATA
 694 #define CONFIG_FSL_SATA
 695
 696 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 697 #define CONFIG_SATA1
 698 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 699 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 700 #define CONFIG_SATA2
 701 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 702 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 703
 704 #define CONFIG_LBA48
 705 #define CONFIG_CMD_SATA
 706 #define CONFIG_DOS_PARTITION
 707 #endif
 708
 709 #ifdef CONFIG_FMAN_ENET
 710 #define CONFIG_MII              /* MII PHY management */
 711 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 712 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 713 #endif
 714
 715 /*
 716 * USB
 717 */
 718 #define CONFIG_USB_STORAGE
 719 #define CONFIG_USB_EHCI
 720 #define CONFIG_USB_EHCI_FSL
 721 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 722 #define CONFIG_HAS_FSL_DR_USB
 723
 724 #define CONFIG_MMC
 725
 726 #ifdef CONFIG_MMC
 727 #define CONFIG_FSL_ESDHC
 728 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 729 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 730 #define CONFIG_GENERIC_MMC
 731 #define CONFIG_DOS_PARTITION
 732 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 733 #endif
 734
 735 /* Hash command with SHA acceleration supported in hardware */
 736 #ifdef CONFIG_FSL_CAAM
 737 #define CONFIG_CMD_HASH
 738 #define CONFIG_SHA_HW_ACCEL
 739 #endif
 740
 741 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 742
 743 #define __USB_PHY_TYPE  utmi
 744
 745 /*
 746  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 747  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 748  * interleaving. It can be cacheline, page, bank, superbank.
 749  * See doc/README.fsl-ddr for details.
 750  */
 751 #ifdef CONFIG_PPC_T4240
 752 #define CTRL_INTLV_PREFERED 3way_4KB
 753 #else
 754 #define CTRL_INTLV_PREFERED cacheline
 755 #endif
 756
 757 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 758         "hwconfig=fsl_ddr:"                                     \
 759         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 760         "bank_intlv=auto;"                                      \
 761         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 762         "netdev=eth0\0"                                         \
 763         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 764         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 765         "tftpflash=tftpboot $loadaddr $uboot && "               \
 766         "protect off $ubootaddr +$filesize && "                 \
 767         "erase $ubootaddr +$filesize && "                       \
 768         "cp.b $loadaddr $ubootaddr $filesize && "               \
 769         "protect on $ubootaddr +$filesize && "                  \
 770         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 771         "consoledev=ttyS0\0"                                    \
 772         "ramdiskaddr=2000000\0"                                 \
 773         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 774         "fdtaddr=c00000\0"                                      \
 775         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 776         "bdev=sda3\0"
 777
 778 #define CONFIG_HVBOOT                                   \
 779         "setenv bootargs config-addr=0x60000000; "      \
 780         "bootm 0x01000000 - 0x00f00000"
 781
 782 #define CONFIG_LINUX                                    \
 783         "setenv bootargs root=/dev/ram rw "             \
 784         "console=$consoledev,$baudrate $othbootargs;"   \
 785         "setenv ramdiskaddr 0x02000000;"                \
 786         "setenv fdtaddr 0x00c00000;"                    \
 787         "setenv loadaddr 0x1000000;"                    \
 788         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 789
 790 #define CONFIG_HDBOOT                                   \
 791         "setenv bootargs root=/dev/$bdev rw "           \
 792         "console=$consoledev,$baudrate $othbootargs;"   \
 793         "tftp $loadaddr $bootfile;"                     \
 794         "tftp $fdtaddr $fdtfile;"                       \
 795         "bootm $loadaddr - $fdtaddr"
 796
 797 #define CONFIG_NFSBOOTCOMMAND                   \
 798         "setenv bootargs root=/dev/nfs rw "     \
 799         "nfsroot=$serverip:$rootpath "          \
 800         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 801         "console=$consoledev,$baudrate $othbootargs;"   \
 802         "tftp $loadaddr $bootfile;"             \
 803         "tftp $fdtaddr $fdtfile;"               \
 804         "bootm $loadaddr - $fdtaddr"
 805
 806 #define CONFIG_RAMBOOTCOMMAND                           \
 807         "setenv bootargs root=/dev/ram rw "             \
 808         "console=$consoledev,$baudrate $othbootargs;"   \
 809         "tftp $ramdiskaddr $ramdiskfile;"               \
 810         "tftp $loadaddr $bootfile;"                     \
 811         "tftp $fdtaddr $fdtfile;"                       \
 812         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 813
 814 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 815
 816 #include <asm/fsl_secure_boot.h>
 817
 818 #endif  /* __CONFIG_H */