include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17
  18 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21 #ifndef CONFIG_SDCARD
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #else
  25 #define CONFIG_SPL_FLUSH_IMAGE
  26 #define CONFIG_SPL_PAD_TO               0x40000
  27 #define CONFIG_SPL_MAX_SIZE             0x28000
  28 #define RESET_VECTOR_OFFSET             0x27FFC
  29 #define BOOT_PAGE_OFFSET                0x27000
  30
  31 #ifdef  CONFIG_SDCARD
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  33 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  34 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  35 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  36 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  37 #ifndef CONFIG_SPL_BUILD
  38 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  39 #endif
  40 #endif
  41
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SPL_SKIP_RELOCATE
  44 #define CONFIG_SPL_COMMON_INIT_DDR
  45 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  46 #endif
  47
  48 #endif
  49 #endif /* CONFIG_RAMBOOT_PBL */
  50
  51 /* High Level Configuration Options */
  52 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  53
  54 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  55 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  56 #endif
  57
  58 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  59 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  60 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  61 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  62 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  63 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  64
  65 /*
  66  * These can be toggled for performance analysis, otherwise use default.
  67  */
  68 #define CONFIG_SYS_CACHE_STASHING
  69 #define CONFIG_BTB                      /* toggle branch predition */
  70 #ifdef CONFIG_DDR_ECC
  71 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  72 #endif
  73
  74 #define CONFIG_ENABLE_36BIT_PHYS
  75
  76 /*
  77  *  Config the L3 Cache as L3 SRAM
  78  */
  79 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  80 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  81 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  82 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  83 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
  84 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
  85 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
  86
  87 #define CONFIG_SYS_DCSRBAR              0xf0000000
  88 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  89
  90 /*
  91  * DDR Setup
  92  */
  93 #define CONFIG_VERY_BIG_RAM
  94 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  95 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  96
  97 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  98 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  99
 100 /*
 101  * IFC Definitions
 102  */
 103 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 104 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 105
 106 #ifdef CONFIG_SPL_BUILD
 107 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 108 #else
 109 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 110 #endif
 111
 112 #define CONFIG_HWCONFIG
 113
 114 /* define to use L1 as initial stack */
 115 #define CONFIG_L1_INIT_RAM
 116 #define CONFIG_SYS_INIT_RAM_LOCK
 117 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 118 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 119 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 120 /* The assembler doesn't like typecast */
 121 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 122         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 123           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 124 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 125
 126 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 127                                         GENERATED_GBL_DATA_SIZE)
 128 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 129
 130 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 131
 132 /* Serial Port - controlled on board with jumper J8
 133  * open - index 2
 134  * shorted - index 1
 135  */
 136 #define CONFIG_SYS_NS16550_SERIAL
 137 #define CONFIG_SYS_NS16550_REG_SIZE     1
 138 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 139
 140 #define CONFIG_SYS_BAUDRATE_TABLE       \
 141         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 142
 143 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 144 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 145 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 146 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 147
 148 /* I2C */
 149
 150 /*
 151  * General PCI
 152  * Memory space is mapped 1-1, but I/O space must start from 0.
 153  */
 154
 155 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 156 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 157 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 158 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 159 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 160
 161 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 162 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 163 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 164 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 165 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 166
 167 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 168 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 169 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 170 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 171 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 172
 173 /* controller 4, Base address 203000 */
 174 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 175 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 176 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 177
 178 #ifdef CONFIG_PCI
 179 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 180 #endif  /* CONFIG_PCI */
 181
 182 /* SATA */
 183 #ifdef CONFIG_FSL_SATA_V2
 184 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 185 #define CONFIG_SATA1
 186 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 187 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 188 #define CONFIG_SATA2
 189 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 190 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 191
 192 #define CONFIG_LBA48
 193 #endif
 194
 195 #ifdef CONFIG_FMAN_ENET
 196 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 197 #endif
 198
 199 /*
 200  * Environment
 201  */
 202 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 203 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 204
 205 /*
 206  * Miscellaneous configurable options
 207  */
 208
 209 /*
 210  * For booting Linux, the board info and command line data
 211  * have to be in the first 64 MB of memory, since this is
 212  * the maximum mapped by the Linux kernel during initialization.
 213  */
 214 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 215 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 216
 217 /*
 218  * Environment Configuration
 219  */
 220 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 221 #define CONFIG_BOOTFILE         "uImage"
 222 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 223
 224 #define HVBOOT                                  \
 225         "setenv bootargs config-addr=0x60000000; "      \
 226         "bootm 0x01000000 - 0x00f00000"
 227
 228 #define CONFIG_SYS_CLK_FREQ     66666666
 229
 230 #ifndef __ASSEMBLY__
 231 unsigned long get_board_sys_clk(void);
 232 #endif
 233
 234 /*
 235  * DDR Setup
 236  */
 237 #define CONFIG_SYS_SPD_BUS_NUM  0
 238 #define SPD_EEPROM_ADDRESS1     0x52
 239 #define SPD_EEPROM_ADDRESS2     0x54
 240 #define SPD_EEPROM_ADDRESS3     0x56
 241 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 242 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 243
 244 /*
 245  * IFC Definitions
 246  */
 247 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 248 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 249                                 + 0x8000000) | \
 250                                 CSPR_PORT_SIZE_16 | \
 251                                 CSPR_MSEL_NOR | \
 252                                 CSPR_V)
 253 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 254 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 255                                 CSPR_PORT_SIZE_16 | \
 256                                 CSPR_MSEL_NOR | \
 257                                 CSPR_V)
 258 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 259 /* NOR Flash Timing Params */
 260 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 261
 262 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 263                                 FTIM0_NOR_TEADC(0x5) | \
 264                                 FTIM0_NOR_TEAHC(0x5))
 265 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 266                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 267                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 268 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 269                                 FTIM2_NOR_TCH(0x4) | \
 270                                 FTIM2_NOR_TWPH(0x0E) | \
 271                                 FTIM2_NOR_TWP(0x1c))
 272 #define CONFIG_SYS_NOR_FTIM3    0x0
 273
 274 #define CONFIG_SYS_FLASH_QUIET_TEST
 275 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 276
 277 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 278 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 279 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 280 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 281
 282 #define CONFIG_SYS_FLASH_EMPTY_INFO
 283 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 284                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 285
 286 /* NAND Flash on IFC */
 287 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 288 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 289 #define CONFIG_SYS_NAND_BASE            0xff800000
 290 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 291
 292 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 293 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 294                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 295                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 296                                 | CSPR_V)
 297 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 298
 299 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 300                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 301                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 302                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 303                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 304                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 305                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 306
 307 /* ONFI NAND Flash mode0 Timing Params */
 308 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 309                                         FTIM0_NAND_TWP(0x18)   | \
 310                                         FTIM0_NAND_TWCHT(0x07) | \
 311                                         FTIM0_NAND_TWH(0x0a))
 312 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 313                                         FTIM1_NAND_TWBE(0x39)  | \
 314                                         FTIM1_NAND_TRR(0x0e)   | \
 315                                         FTIM1_NAND_TRP(0x18))
 316 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 317                                         FTIM2_NAND_TREH(0x0a) | \
 318                                         FTIM2_NAND_TWHRE(0x1e))
 319 #define CONFIG_SYS_NAND_FTIM3           0x0
 320
 321 #define CONFIG_SYS_NAND_DDR_LAW         11
 322 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 323 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 324
 325 #if defined(CONFIG_MTD_RAW_NAND)
 326 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 327 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 328 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 329 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 330 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 331 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 332 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 333 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 334 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 335 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 336 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 337 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 338 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 339 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 340 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 341 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 342 #else
 343 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 344 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 345 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 346 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 347 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 348 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 349 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 350 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 351 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 352 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 353 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 354 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 355 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 356 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 357 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 358 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 359 #endif
 360 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 361 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 362 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 363 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 364 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 365 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 366 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 367 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 368
 369 /* CPLD on IFC */
 370 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 371 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 372 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 373 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 374                                 | CSPR_PORT_SIZE_8 \
 375                                 | CSPR_MSEL_GPCM \
 376                                 | CSPR_V)
 377
 378 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 379 #define CONFIG_SYS_CSOR3        0x0
 380
 381 /* CPLD Timing parameters for IFC CS3 */
 382 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 383                                         FTIM0_GPCM_TEADC(0x0e) | \
 384                                         FTIM0_GPCM_TEAHC(0x0e))
 385 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 386                                         FTIM1_GPCM_TRAD(0x1f))
 387 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 388                                         FTIM2_GPCM_TCH(0x8) | \
 389                                         FTIM2_GPCM_TWP(0x1f))
 390 #define CONFIG_SYS_CS3_FTIM3            0x0
 391
 392 #if defined(CONFIG_RAMBOOT_PBL)
 393 #define CONFIG_SYS_RAMBOOT
 394 #endif
 395
 396 /* I2C */
 397 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 398 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 399
 400 #define I2C_MUX_CH_DEFAULT      0x8
 401 #define I2C_MUX_CH_VOL_MONITOR  0xa
 402 #define I2C_MUX_CH_VSC3316_FS   0xc
 403 #define I2C_MUX_CH_VSC3316_BS   0xd
 404
 405 /* Voltage monitor on channel 2*/
 406 #define I2C_VOL_MONITOR_ADDR            0x40
 407 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 408 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 409 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 410
 411 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 412 #ifndef CONFIG_SPL_BUILD
 413 #define CONFIG_VID
 414 #endif
 415 #define CONFIG_VOL_MONITOR_IR36021_SET
 416 #define CONFIG_VOL_MONITOR_IR36021_READ
 417 /* The lowest and highest voltage allowed for T4240RDB */
 418 #define VDD_MV_MIN                      819
 419 #define VDD_MV_MAX                      1212
 420
 421 /*
 422  * eSPI - Enhanced SPI
 423  */
 424
 425 /* Qman/Bman */
 426 #ifndef CONFIG_NOBQFMAN
 427 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 428 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 429 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 430 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 431 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 432 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 433 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 434 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 435 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 436                                         CONFIG_SYS_BMAN_CENA_SIZE)
 437 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 438 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 439 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 440 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 441 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 442 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 443 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 444 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 445 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 446 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 447 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 448                                         CONFIG_SYS_QMAN_CENA_SIZE)
 449 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 450 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 451
 452 #define CONFIG_SYS_DPAA_FMAN
 453 #define CONFIG_SYS_DPAA_PME
 454 #define CONFIG_SYS_PMAN
 455 #define CONFIG_SYS_DPAA_DCE
 456 #define CONFIG_SYS_DPAA_RMAN
 457 #define CONFIG_SYS_INTERLAKEN
 458
 459 /* Default address of microcode for the Linux Fman driver */
 460 #if defined(CONFIG_SPIFLASH)
 461 /*
 462  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 463  * env, so we got 0x110000.
 464  */
 465 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 466 #elif defined(CONFIG_SDCARD)
 467 /*
 468  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 469  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 470  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 471  */
 472 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 473 #else
 474 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 475 #endif
 476 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 477 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 478 #endif /* CONFIG_NOBQFMAN */
 479
 480 #ifdef CONFIG_SYS_DPAA_FMAN
 481 #define SGMII_PHY_ADDR1 0x0
 482 #define SGMII_PHY_ADDR2 0x1
 483 #define SGMII_PHY_ADDR3 0x2
 484 #define SGMII_PHY_ADDR4 0x3
 485 #define SGMII_PHY_ADDR5 0x4
 486 #define SGMII_PHY_ADDR6 0x5
 487 #define SGMII_PHY_ADDR7 0x6
 488 #define SGMII_PHY_ADDR8 0x7
 489 #define FM1_10GEC1_PHY_ADDR     0x10
 490 #define FM1_10GEC2_PHY_ADDR     0x11
 491 #define FM2_10GEC1_PHY_ADDR     0x12
 492 #define FM2_10GEC2_PHY_ADDR     0x13
 493 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 494 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 495 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 496 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 497 #endif
 498
 499 /* SATA */
 500 #ifdef CONFIG_FSL_SATA_V2
 501 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 502 #define CONFIG_SATA1
 503 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 504 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 505 #define CONFIG_SATA2
 506 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 507 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 508
 509 #define CONFIG_LBA48
 510 #endif
 511
 512 #ifdef CONFIG_FMAN_ENET
 513 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 514 #endif
 515
 516 /*
 517 * USB
 518 */
 519 #define CONFIG_USB_EHCI_FSL
 520 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 521 #define CONFIG_HAS_FSL_DR_USB
 522
 523 #ifdef CONFIG_MMC
 524 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 525 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 526 #endif
 527
 528
 529 #define __USB_PHY_TYPE  utmi
 530
 531 /*
 532  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 533  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 534  * interleaving. It can be cacheline, page, bank, superbank.
 535  * See doc/README.fsl-ddr for details.
 536  */
 537 #ifdef CONFIG_ARCH_T4240
 538 #define CTRL_INTLV_PREFERED 3way_4KB
 539 #else
 540 #define CTRL_INTLV_PREFERED cacheline
 541 #endif
 542
 543 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 544         "hwconfig=fsl_ddr:"                                     \
 545         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 546         "bank_intlv=auto;"                                      \
 547         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 548         "netdev=eth0\0"                                         \
 549         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 550         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 551         "tftpflash=tftpboot $loadaddr $uboot && "               \
 552         "protect off $ubootaddr +$filesize && "                 \
 553         "erase $ubootaddr +$filesize && "                       \
 554         "cp.b $loadaddr $ubootaddr $filesize && "               \
 555         "protect on $ubootaddr +$filesize && "                  \
 556         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 557         "consoledev=ttyS0\0"                                    \
 558         "ramdiskaddr=2000000\0"                                 \
 559         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 560         "fdtaddr=1e00000\0"                                     \
 561         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 562         "bdev=sda3\0"
 563
 564 #define HVBOOT                                  \
 565         "setenv bootargs config-addr=0x60000000; "      \
 566         "bootm 0x01000000 - 0x00f00000"
 567
 568 #define LINUXBOOTCOMMAND                                        \
 569         "setenv bootargs root=/dev/ram rw "             \
 570         "console=$consoledev,$baudrate $othbootargs;"   \
 571         "setenv ramdiskaddr 0x02000000;"                \
 572         "setenv fdtaddr 0x00c00000;"                    \
 573         "setenv loadaddr 0x1000000;"                    \
 574         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 575
 576 #define HDBOOT                                  \
 577         "setenv bootargs root=/dev/$bdev rw "           \
 578         "console=$consoledev,$baudrate $othbootargs;"   \
 579         "tftp $loadaddr $bootfile;"                     \
 580         "tftp $fdtaddr $fdtfile;"                       \
 581         "bootm $loadaddr - $fdtaddr"
 582
 583 #define NFSBOOTCOMMAND                  \
 584         "setenv bootargs root=/dev/nfs rw "     \
 585         "nfsroot=$serverip:$rootpath "          \
 586         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 587         "console=$consoledev,$baudrate $othbootargs;"   \
 588         "tftp $loadaddr $bootfile;"             \
 589         "tftp $fdtaddr $fdtfile;"               \
 590         "bootm $loadaddr - $fdtaddr"
 591
 592 #define RAMBOOTCOMMAND                          \
 593         "setenv bootargs root=/dev/ram rw "             \
 594         "console=$consoledev,$baudrate $othbootargs;"   \
 595         "tftp $ramdiskaddr $ramdiskfile;"               \
 596         "tftp $loadaddr $bootfile;"                     \
 597         "tftp $fdtaddr $fdtfile;"                       \
 598         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 599
 600 #define CONFIG_BOOTCOMMAND              LINUXBOOTCOMMAND
 601
 602 #include <asm/fsl_secure_boot.h>
 603
 604 #endif  /* __CONFIG_H */