include/configs/T4240QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 QDS board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240QDS
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg
  24 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_SERIAL_SUPPORT
  29 #define CONFIG_SPL_FLUSH_IMAGE
  30 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  31 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  32 #define CONFIG_SYS_TEXT_BASE            0x00201000
  33 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  34 #define CONFIG_SPL_PAD_TO               0x40000
  35 #define CONFIG_SPL_MAX_SIZE             0x28000
  36 #define RESET_VECTOR_OFFSET             0x27FFC
  37 #define BOOT_PAGE_OFFSET                0x27000
  38
  39 #ifdef  CONFIG_NAND
  40 #define CONFIG_SPL_NAND_SUPPORT
  41 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  42 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  43 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  44 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  45 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  46 #define CONFIG_SPL_NAND_BOOT
  47 #endif
  48
  49 #ifdef  CONFIG_SDCARD
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  51 #define CONFIG_SPL_MMC_MINIMAL
  52 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  53 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  54 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  55 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  56 #ifndef CONFIG_SPL_BUILD
  57 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  58 #endif
  59 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  60 #define CONFIG_SPL_MMC_BOOT
  61 #endif
  62
  63 #ifdef CONFIG_SPL_BUILD
  64 #define CONFIG_SPL_SKIP_RELOCATE
  65 #define CONFIG_SPL_COMMON_INIT_DDR
  66 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  67 #define CONFIG_SYS_NO_FLASH
  68 #endif
  69
  70 #endif
  71 #endif /* CONFIG_RAMBOOT_PBL */
  72
  73 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  74 /* Set 1M boot space */
  75 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  76 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  77                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  78 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  79 #define CONFIG_SYS_NO_FLASH
  80 #endif
  81
  82 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  83 #define CONFIG_DDR_ECC
  84
  85 #include "t4qds.h"
  86
  87 #ifdef CONFIG_SYS_NO_FLASH
  88 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  89 #define CONFIG_ENV_IS_NOWHERE
  90 #endif
  91 #else
  92 #define CONFIG_FLASH_CFI_DRIVER
  93 #define CONFIG_SYS_FLASH_CFI
  94 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  95 #endif
  96
  97 #if defined(CONFIG_SPIFLASH)
  98 #define CONFIG_SYS_EXTRA_ENV_RELOC
  99 #define CONFIG_ENV_IS_IN_SPI_FLASH
 100 #define CONFIG_ENV_SPI_BUS              0
 101 #define CONFIG_ENV_SPI_CS               0
 102 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 103 #define CONFIG_ENV_SPI_MODE             0
 104 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 105 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 106 #define CONFIG_ENV_SECT_SIZE            0x10000
 107 #elif defined(CONFIG_SDCARD)
 108 #define CONFIG_SYS_EXTRA_ENV_RELOC
 109 #define CONFIG_ENV_IS_IN_MMC
 110 #define CONFIG_SYS_MMC_ENV_DEV          0
 111 #define CONFIG_ENV_SIZE                 0x2000
 112 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 113 #elif defined(CONFIG_NAND)
 114 #define CONFIG_SYS_EXTRA_ENV_RELOC
 115 #define CONFIG_ENV_IS_IN_NAND
 116 #define CONFIG_ENV_SIZE                 0x2000
 117 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 118 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 119 #define CONFIG_ENV_IS_IN_REMOTE
 120 #define CONFIG_ENV_ADDR         0xffe20000
 121 #define CONFIG_ENV_SIZE         0x2000
 122 #elif defined(CONFIG_ENV_IS_NOWHERE)
 123 #define CONFIG_ENV_SIZE         0x2000
 124 #else
 125 #define CONFIG_ENV_IS_IN_FLASH
 126 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 127 #define CONFIG_ENV_SIZE         0x2000
 128 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 129 #endif
 130
 131 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 132 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 133
 134 #ifndef __ASSEMBLY__
 135 unsigned long get_board_sys_clk(void);
 136 unsigned long get_board_ddr_clk(void);
 137 #endif
 138
 139 /* EEPROM */
 140 #define CONFIG_ID_EEPROM
 141 #define CONFIG_SYS_I2C_EEPROM_NXID
 142 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 143 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 144 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 145
 146 /*
 147  * DDR Setup
 148  */
 149 #define CONFIG_SYS_SPD_BUS_NUM  0
 150 #define SPD_EEPROM_ADDRESS1     0x51
 151 #define SPD_EEPROM_ADDRESS2     0x52
 152 #define SPD_EEPROM_ADDRESS3     0x53
 153 #define SPD_EEPROM_ADDRESS4     0x54
 154 #define SPD_EEPROM_ADDRESS5     0x55
 155 #define SPD_EEPROM_ADDRESS6     0x56
 156 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 157 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 158
 159 /*
 160  * IFC Definitions
 161  */
 162 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 163 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 164                                 + 0x8000000) | \
 165                                 CSPR_PORT_SIZE_16 | \
 166                                 CSPR_MSEL_NOR | \
 167                                 CSPR_V)
 168 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 169 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 170                                 CSPR_PORT_SIZE_16 | \
 171                                 CSPR_MSEL_NOR | \
 172                                 CSPR_V)
 173 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 174 /* NOR Flash Timing Params */
 175 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 176
 177 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 178                                 FTIM0_NOR_TEADC(0x5) | \
 179                                 FTIM0_NOR_TEAHC(0x5))
 180 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 181                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 182                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 183 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 184                                 FTIM2_NOR_TCH(0x4) | \
 185                                 FTIM2_NOR_TWPH(0x0E) | \
 186                                 FTIM2_NOR_TWP(0x1c))
 187 #define CONFIG_SYS_NOR_FTIM3    0x0
 188
 189 #define CONFIG_SYS_FLASH_QUIET_TEST
 190 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 191
 192 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 193 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 194 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 195 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 196
 197 #define CONFIG_SYS_FLASH_EMPTY_INFO
 198 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 199                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 200
 201 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 202 #define QIXIS_BASE                      0xffdf0000
 203 #define QIXIS_LBMAP_SWITCH              6
 204 #define QIXIS_LBMAP_MASK                0x0f
 205 #define QIXIS_LBMAP_SHIFT               0
 206 #define QIXIS_LBMAP_DFLTBANK            0x00
 207 #define QIXIS_LBMAP_ALTBANK             0x04
 208 #define QIXIS_RST_CTL_RESET             0x83
 209 #define QIXIS_RST_FORCE_MEM             0x1
 210 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 211 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 212 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 213 #define QIXIS_BRDCFG5                   0x55
 214 #define QIXIS_MUX_SDHC                  2
 215 #define QIXIS_MUX_SDHC_WIDTH8           1
 216 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 217
 218 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 219 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 220                                 | CSPR_PORT_SIZE_8 \
 221                                 | CSPR_MSEL_GPCM \
 222                                 | CSPR_V)
 223 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 224 #define CONFIG_SYS_CSOR3        0x0
 225 /* QIXIS Timing parameters for IFC CS3 */
 226 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 227                                         FTIM0_GPCM_TEADC(0x0e) | \
 228                                         FTIM0_GPCM_TEAHC(0x0e))
 229 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 230                                         FTIM1_GPCM_TRAD(0x3f))
 231 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 232                                         FTIM2_GPCM_TCH(0x8) | \
 233                                         FTIM2_GPCM_TWP(0x1f))
 234 #define CONFIG_SYS_CS3_FTIM3            0x0
 235
 236 /* NAND Flash on IFC */
 237 #define CONFIG_NAND_FSL_IFC
 238 #define CONFIG_SYS_NAND_BASE            0xff800000
 239 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 240
 241 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 242 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 243                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 244                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 245                                 | CSPR_V)
 246 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 247
 248 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 249                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 250                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 251                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 252                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 253                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 254                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 255
 256 #define CONFIG_SYS_NAND_ONFI_DETECTION
 257
 258 /* ONFI NAND Flash mode0 Timing Params */
 259 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 260                                         FTIM0_NAND_TWP(0x18)   | \
 261                                         FTIM0_NAND_TWCHT(0x07) | \
 262                                         FTIM0_NAND_TWH(0x0a))
 263 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 264                                         FTIM1_NAND_TWBE(0x39)  | \
 265                                         FTIM1_NAND_TRR(0x0e)   | \
 266                                         FTIM1_NAND_TRP(0x18))
 267 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 268                                         FTIM2_NAND_TREH(0x0a) | \
 269                                         FTIM2_NAND_TWHRE(0x1e))
 270 #define CONFIG_SYS_NAND_FTIM3           0x0
 271
 272 #define CONFIG_SYS_NAND_DDR_LAW         11
 273
 274 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 275 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 276 #define CONFIG_CMD_NAND
 277
 278 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 279 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 280 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 281
 282 #if defined(CONFIG_NAND)
 283 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 284 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 285 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 286 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 287 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 288 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 289 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 290 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 291 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 292 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 293 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 294 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 295 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 296 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 297 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 298 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 299 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 300 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 301 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 302 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 303 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 304 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 305 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 306 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 307 #else
 308 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 309 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 310 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 311 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 312 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 313 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 314 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 315 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 316 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 317 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 318 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 319 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 320 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 321 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 322 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 323 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 324 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 325 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 326 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 327 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 328 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 329 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 330 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 331 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 332 #endif
 333
 334 #if defined(CONFIG_RAMBOOT_PBL)
 335 #define CONFIG_SYS_RAMBOOT
 336 #endif
 337
 338 /* I2C */
 339 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 340 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 341 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 342 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 343
 344 #define I2C_MUX_CH_DEFAULT      0x8
 345 #define I2C_MUX_CH_VOL_MONITOR  0xa
 346 #define I2C_MUX_CH_VSC3316_FS   0xc
 347 #define I2C_MUX_CH_VSC3316_BS   0xd
 348
 349 /* Voltage monitor on channel 2*/
 350 #define I2C_VOL_MONITOR_ADDR            0x40
 351 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 352 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 353 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 354
 355 /* VSC Crossbar switches */
 356 #define CONFIG_VSC_CROSSBAR
 357 #define VSC3316_FSM_TX_ADDR     0x70
 358 #define VSC3316_FSM_RX_ADDR     0x71
 359
 360 /*
 361  * RapidIO
 362  */
 363
 364 /*
 365  * for slave u-boot IMAGE instored in master memory space,
 366  * PHYS must be aligned based on the SIZE
 367  */
 368 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 369 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 370 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 371 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 372 /*
 373  * for slave UCODE and ENV instored in master memory space,
 374  * PHYS must be aligned based on the SIZE
 375  */
 376 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 377 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 378 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 379
 380 /* slave core release by master*/
 381 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 382 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 383
 384 /*
 385  * SRIO_PCIE_BOOT - SLAVE
 386  */
 387 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 388 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 389 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 390                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 391 #endif
 392 /*
 393  * eSPI - Enhanced SPI
 394  */
 395 #define CONFIG_SF_DEFAULT_SPEED         10000000
 396 #define CONFIG_SF_DEFAULT_MODE          0
 397
 398 /* Qman/Bman */
 399 #ifndef CONFIG_NOBQFMAN
 400 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 401 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 402 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 403 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 404 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 405 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 406 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 407 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 408 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 409 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 410                                         CONFIG_SYS_BMAN_CENA_SIZE)
 411 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 412 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 413 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 414 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 415 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 416 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 417 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 418 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 419 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 420 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 421 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 422                                         CONFIG_SYS_QMAN_CENA_SIZE)
 423 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 424 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 425
 426 #define CONFIG_SYS_DPAA_FMAN
 427 #define CONFIG_SYS_DPAA_PME
 428 #define CONFIG_SYS_PMAN
 429 #define CONFIG_SYS_DPAA_DCE
 430 #define CONFIG_SYS_DPAA_RMAN
 431 #define CONFIG_SYS_INTERLAKEN
 432
 433 /* Default address of microcode for the Linux Fman driver */
 434 #if defined(CONFIG_SPIFLASH)
 435 /*
 436  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 437  * env, so we got 0x110000.
 438  */
 439 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 440 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 441 #elif defined(CONFIG_SDCARD)
 442 /*
 443  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 444  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 445  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 446  */
 447 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 448 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 449 #elif defined(CONFIG_NAND)
 450 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 451 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 452 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 453 /*
 454  * Slave has no ucode locally, it can fetch this from remote. When implementing
 455  * in two corenet boards, slave's ucode could be stored in master's memory
 456  * space, the address can be mapped from slave TLB->slave LAW->
 457  * slave SRIO or PCIE outbound window->master inbound window->
 458  * master LAW->the ucode address in master's memory space.
 459  */
 460 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 461 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 462 #else
 463 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 464 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 465 #endif
 466 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 467 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 468 #endif /* CONFIG_NOBQFMAN */
 469
 470 #ifdef CONFIG_SYS_DPAA_FMAN
 471 #define CONFIG_FMAN_ENET
 472 #define CONFIG_PHYLIB_10G
 473 #define CONFIG_PHY_VITESSE
 474 #define CONFIG_PHY_TERANETICS
 475 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 476 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 477 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 478 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 479 #define FM1_10GEC1_PHY_ADDR     0x0
 480 #define FM1_10GEC2_PHY_ADDR     0x1
 481 #define FM2_10GEC1_PHY_ADDR     0x2
 482 #define FM2_10GEC2_PHY_ADDR     0x3
 483 #endif
 484
 485 /* SATA */
 486 #ifdef CONFIG_FSL_SATA_V2
 487 #define CONFIG_LIBATA
 488 #define CONFIG_FSL_SATA
 489
 490 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 491 #define CONFIG_SATA1
 492 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 493 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 494 #define CONFIG_SATA2
 495 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 496 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 497
 498 #define CONFIG_LBA48
 499 #define CONFIG_CMD_SATA
 500 #define CONFIG_DOS_PARTITION
 501 #endif
 502
 503 #ifdef CONFIG_FMAN_ENET
 504 #define CONFIG_MII              /* MII PHY management */
 505 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 506 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 507 #endif
 508
 509 /* Hash command with SHA acceleration supported in hardware */
 510 #ifdef CONFIG_FSL_CAAM
 511 #define CONFIG_CMD_HASH
 512 #define CONFIG_SHA_HW_ACCEL
 513 #endif
 514
 515 /*
 516 * USB
 517 */
 518 #define CONFIG_USB_EHCI
 519 #define CONFIG_USB_EHCI_FSL
 520 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 521 #define CONFIG_HAS_FSL_DR_USB
 522
 523 #define CONFIG_MMC
 524
 525 #ifdef CONFIG_MMC
 526 #define CONFIG_FSL_ESDHC
 527 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 528 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 529 #define CONFIG_GENERIC_MMC
 530 #define CONFIG_DOS_PARTITION
 531 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 532 #define CONFIG_ESDHC_DETECT_QUIRK \
 533         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 534         IS_SVR_REV(get_svr(), 1, 0))
 535 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 536         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 537 #endif
 538
 539
 540 #define __USB_PHY_TYPE  utmi
 541
 542 /*
 543  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 544  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 545  * interleaving. It can be cacheline, page, bank, superbank.
 546  * See doc/README.fsl-ddr for details.
 547  */
 548 #ifdef CONFIG_PPC_T4240
 549 #define CTRL_INTLV_PREFERED 3way_4KB
 550 #else
 551 #define CTRL_INTLV_PREFERED cacheline
 552 #endif
 553
 554 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 555         "hwconfig=fsl_ddr:"                                     \
 556         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 557         "bank_intlv=auto;"                                      \
 558         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 559         "netdev=eth0\0"                                         \
 560         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 561         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 562         "tftpflash=tftpboot $loadaddr $uboot && "               \
 563         "protect off $ubootaddr +$filesize && "                 \
 564         "erase $ubootaddr +$filesize && "                       \
 565         "cp.b $loadaddr $ubootaddr $filesize && "               \
 566         "protect on $ubootaddr +$filesize && "                  \
 567         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 568         "consoledev=ttyS0\0"                                    \
 569         "ramdiskaddr=2000000\0"                                 \
 570         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 571         "fdtaddr=1e00000\0"                                     \
 572         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 573         "bdev=sda3\0"
 574
 575 #define CONFIG_HVBOOT                           \
 576         "setenv bootargs config-addr=0x60000000; "      \
 577         "bootm 0x01000000 - 0x00f00000"
 578
 579 #define CONFIG_ALU                              \
 580         "setenv bootargs root=/dev/$bdev rw "           \
 581         "console=$consoledev,$baudrate $othbootargs;"   \
 582         "cpu 1 release 0x01000000 - - -;"               \
 583         "cpu 2 release 0x01000000 - - -;"               \
 584         "cpu 3 release 0x01000000 - - -;"               \
 585         "cpu 4 release 0x01000000 - - -;"               \
 586         "cpu 5 release 0x01000000 - - -;"               \
 587         "cpu 6 release 0x01000000 - - -;"               \
 588         "cpu 7 release 0x01000000 - - -;"               \
 589         "go 0x01000000"
 590
 591 #define CONFIG_LINUX                            \
 592         "setenv bootargs root=/dev/ram rw "             \
 593         "console=$consoledev,$baudrate $othbootargs;"   \
 594         "setenv ramdiskaddr 0x02000000;"                \
 595         "setenv fdtaddr 0x00c00000;"                    \
 596         "setenv loadaddr 0x1000000;"                    \
 597         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 598
 599 #define CONFIG_HDBOOT                                   \
 600         "setenv bootargs root=/dev/$bdev rw "           \
 601         "console=$consoledev,$baudrate $othbootargs;"   \
 602         "tftp $loadaddr $bootfile;"                     \
 603         "tftp $fdtaddr $fdtfile;"                       \
 604         "bootm $loadaddr - $fdtaddr"
 605
 606 #define CONFIG_NFSBOOTCOMMAND                   \
 607         "setenv bootargs root=/dev/nfs rw "     \
 608         "nfsroot=$serverip:$rootpath "          \
 609         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 610         "console=$consoledev,$baudrate $othbootargs;"   \
 611         "tftp $loadaddr $bootfile;"             \
 612         "tftp $fdtaddr $fdtfile;"               \
 613         "bootm $loadaddr - $fdtaddr"
 614
 615 #define CONFIG_RAMBOOTCOMMAND                           \
 616         "setenv bootargs root=/dev/ram rw "             \
 617         "console=$consoledev,$baudrate $othbootargs;"   \
 618         "tftp $ramdiskaddr $ramdiskfile;"               \
 619         "tftp $loadaddr $bootfile;"                     \
 620         "tftp $fdtaddr $fdtfile;"                       \
 621         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 622
 623 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 624
 625 #include <asm/fsl_secure_boot.h>
 626
 627 #endif  /* __CONFIG_H */