exynos5: Use config_distro_bootcmd.h
[platform/kernel/u-boot.git] / include / configs / T4240EMU.h
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * T4240 EMU board configuration file
9  */
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_T4240EMU
14 #define CONFIG_PHYS_64BIT
15
16 #define CONFIG_SYS_NO_FLASH             1
17 #define CONFIG_SYS_FSL_DDR_EMU          1
18 #define CONFIG_SYS_FSL_NO_QIXIS         1
19 #define CONFIG_SYS_FSL_NO_SERDES        1
20
21 #include "t4qds.h"
22
23 #define CONFIG_CMD_CACHE
24 #define CONFIG_CMD_CACHE_FLUSH
25
26 #define CONFIG_ENV_IS_NOWHERE
27 #define CONFIG_ENV_SIZE         0x2000
28
29 #define CONFIG_SYS_CLK_FREQ     100000000
30 #define CONFIG_DDR_CLK_FREQ     133333333
31 #define CONFIG_FSL_TBCLK_EXTRA_DIV 100
32
33 /*
34  * DDR Setup
35  */
36 #define CONFIG_SYS_SPD_BUS_NUM  1
37 #define SPD_EEPROM_ADDRESS1     0x51
38 #define SPD_EEPROM_ADDRESS2     0x52
39 #define SPD_EEPROM_ADDRESS3     0x53
40 #define SPD_EEPROM_ADDRESS4     0x54
41 #define SPD_EEPROM_ADDRESS5     0x55
42 #define SPD_EEPROM_ADDRESS6     0x56
43 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
44 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
45
46 /*
47  * IFC Definitions
48  */
49 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
50 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
51 /* NOR Flash Timing Params */
52 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
53                                 + 0x8000000) | \
54                                 CSPR_PORT_SIZE_32 | \
55                                 CSPR_MSEL_NOR | \
56                                 CSPR_V)
57 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(0)
58 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x1) | \
59                                 FTIM0_NOR_TEADC(0x1) | \
60                                 FTIM0_NOR_TEAHC(0x1))
61 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1) | \
62                                 FTIM1_NOR_TRAD_NOR(0x1))
63 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x0) | \
64                                 FTIM2_NOR_TCH(0x0) | \
65                                 FTIM2_NOR_TWP(0x1))
66 #define CONFIG_SYS_NOR_FTIM3    0x04000000
67 #define CONFIG_SYS_IFC_CCR      0x01000000
68
69 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
70 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
71 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
72 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
73 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
74 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
75 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
76 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
77
78 /* I2C */
79 #define CONFIG_SYS_FSL_I2C_SPEED        4000000 /* faster speed for emulator */
80 #define CONFIG_SYS_FSL_I2C2_SPEED       4000000
81
82 /* Qman/Bman */
83 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
84 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
85 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
86 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
87 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
88 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
89 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
90 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
91 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
92
93 #define CONFIG_SYS_DPAA_FMAN
94 #define CONFIG_SYS_DPAA_PME
95 #define CONFIG_SYS_PMAN
96 #define CONFIG_SYS_DPAA_DCE
97 #define CONFIG_SYS_DPAA_RMAN
98 #define CONFIG_SYS_INTERLAKEN
99
100 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
101 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
102 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
103 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
104
105 #define CONFIG_BOOTDELAY        0
106
107 /*
108  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
109  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
110  * interleaving. It can be cacheline, page, bank, superbank.
111  * See doc/README.fsl-ddr for details.
112  */
113 #ifdef CONFIG_PPC_T4240
114 #define CTRL_INTLV_PREFERED 3way_4KB
115 #else
116 #define CTRL_INTLV_PREFERED cacheline
117 #endif
118
119 #define CONFIG_EXTRA_ENV_SETTINGS                               \
120         "hwconfig=fsl_ddr:"                                     \
121         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
122         "bank_intlv=auto;"                                      \
123         "netdev=eth0\0"                                         \
124         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
125 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
126         "consoledev=ttyS0\0"                                    \
127         "ramdiskaddr=2000000\0"                                 \
128         "ramdiskfile=t4240emu/ramdisk.uboot\0"                  \
129         "fdtaddr=c00000\0"                                      \
130         "fdtfile=t4240emu/t4240emu.dtb\0"                               \
131         "bdev=sda3\0"
132
133 /*
134  * For emulation this causes u-boot to jump to the start of the proof point
135  * app code automatically
136  */
137 #define CONFIG_PROOF_POINTS                     \
138         "setenv bootargs root=/dev/$bdev rw "           \
139         "console=$consoledev,$baudrate $othbootargs;"   \
140         "cpu 1 release 0x29000000 - - -;"               \
141         "cpu 2 release 0x29000000 - - -;"               \
142         "cpu 3 release 0x29000000 - - -;"               \
143         "cpu 4 release 0x29000000 - - -;"               \
144         "cpu 5 release 0x29000000 - - -;"               \
145         "cpu 6 release 0x29000000 - - -;"               \
146         "cpu 7 release 0x29000000 - - -;"               \
147         "go 0x29000000"
148
149 #define CONFIG_HVBOOT                           \
150         "setenv bootargs config-addr=0x60000000; "      \
151         "bootm 0x01000000 - 0x00f00000"
152
153 #define CONFIG_LINUX                                    \
154         "errata;"                                       \
155         "setenv othbootargs ignore_loglevel;"           \
156         "setenv bootargs root=/dev/ram rw "             \
157         "console=$consoledev,$baudrate $othbootargs;"   \
158         "setenv ramdiskaddr 0x02000000;"                \
159         "setenv fdtaddr 0x00c00000;"                    \
160         "setenv loadaddr 0x1000000;"                    \
161         "bootm $loadaddr $ramdiskaddr $fdtaddr"
162
163 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
164
165 #endif  /* __CONFIG_H */