include/configs/T208xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080 RDB/PCIe board configuration file
   9  */
  10
  11 #ifndef __T2080RDB_H
  12 #define __T2080RDB_H
  13
  14 #define CONFIG_T2080RDB
  15 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  16 #define CONFIG_USB_EHCI
  17 #define CONFIG_FSL_SATA_V2
  18
  19 /* High Level Configuration Options */
  20 #define CONFIG_BOOKE
  21 #define CONFIG_E500             /* BOOKE e500 family */
  22 #define CONFIG_E500MC           /* BOOKE e500mc family */
  23 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  24 #define CONFIG_MP               /* support multiple processors */
  25 #define CONFIG_ENABLE_36BIT_PHYS
  26
  27 #ifdef CONFIG_PHYS_64BIT
  28 #define CONFIG_ADDR_MAP 1
  29 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  30 #endif
  31
  32 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  33 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  34 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  35 #define CONFIG_FSL_CAAM         /* Enable SEC/CAAM */
  36 #define CONFIG_ENV_OVERWRITE
  37
  38 #ifdef CONFIG_RAMBOOT_PBL
  39 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
  40
  41 #define CONFIG_SPL_FLUSH_IMAGE
  42 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  43 #define CONFIG_SYS_TEXT_BASE            0x00201000
  44 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  45 #define CONFIG_SPL_PAD_TO               0x40000
  46 #define CONFIG_SPL_MAX_SIZE             0x28000
  47 #define RESET_VECTOR_OFFSET             0x27FFC
  48 #define BOOT_PAGE_OFFSET                0x27000
  49 #ifdef CONFIG_SPL_BUILD
  50 #define CONFIG_SPL_SKIP_RELOCATE
  51 #define CONFIG_SPL_COMMON_INIT_DDR
  52 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  53 #define CONFIG_SYS_NO_FLASH
  54 #endif
  55
  56 #ifdef CONFIG_NAND
  57 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  58 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  59 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  60 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  61 #define CONFIG_SYS_LDSCRIPT  "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  62 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg
  63 #define CONFIG_SPL_NAND_BOOT
  64 #endif
  65
  66 #ifdef CONFIG_SPIFLASH
  67 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  68 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
  73 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  74 #ifndef CONFIG_SPL_BUILD
  75 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  76 #endif
  77 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg
  78 #define CONFIG_SPL_SPI_BOOT
  79 #endif
  80
  81 #ifdef CONFIG_SDCARD
  82 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  83 #define CONFIG_SPL_MMC_MINIMAL
  84 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
  85 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
  86 #define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
  87 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
  88 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  89 #ifndef CONFIG_SPL_BUILD
  90 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  91 #endif
  92 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg
  93 #define CONFIG_SPL_MMC_BOOT
  94 #endif
  95
  96 #endif /* CONFIG_RAMBOOT_PBL */
  97
  98 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  99 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 100 /* Set 1M boot space */
 101 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 102 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 103                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 104 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 105 #define CONFIG_SYS_NO_FLASH
 106 #endif
 107
 108 #ifndef CONFIG_SYS_TEXT_BASE
 109 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 110 #endif
 111
 112 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 113 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 114 #endif
 115
 116 /*
 117  * These can be toggled for performance analysis, otherwise use default.
 118  */
 119 #define CONFIG_SYS_CACHE_STASHING
 120 #define CONFIG_BTB              /* toggle branch predition */
 121 #define CONFIG_DDR_ECC
 122 #ifdef CONFIG_DDR_ECC
 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 128 #define CONFIG_SYS_MEMTEST_END          0x00400000
 129 #define CONFIG_SYS_ALT_MEMTEST
 130
 131 #ifndef CONFIG_SYS_NO_FLASH
 132 #define CONFIG_FLASH_CFI_DRIVER
 133 #define CONFIG_SYS_FLASH_CFI
 134 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 135 #endif
 136
 137 #if defined(CONFIG_SPIFLASH)
 138 #define CONFIG_SYS_EXTRA_ENV_RELOC
 139 #define CONFIG_ENV_IS_IN_SPI_FLASH
 140 #define CONFIG_ENV_SPI_BUS      0
 141 #define CONFIG_ENV_SPI_CS       0
 142 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 143 #define CONFIG_ENV_SPI_MODE     0
 144 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 145 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 146 #define CONFIG_ENV_SECT_SIZE    0x10000
 147 #elif defined(CONFIG_SDCARD)
 148 #define CONFIG_SYS_EXTRA_ENV_RELOC
 149 #define CONFIG_ENV_IS_IN_MMC
 150 #define CONFIG_SYS_MMC_ENV_DEV  0
 151 #define CONFIG_ENV_SIZE         0x2000
 152 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 153 #elif defined(CONFIG_NAND)
 154 #define CONFIG_SYS_EXTRA_ENV_RELOC
 155 #define CONFIG_ENV_IS_IN_NAND
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #define CONFIG_ENV_OFFSET       (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 158 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 159 #define CONFIG_ENV_IS_IN_REMOTE
 160 #define CONFIG_ENV_ADDR         0xffe20000
 161 #define CONFIG_ENV_SIZE         0x2000
 162 #elif defined(CONFIG_ENV_IS_NOWHERE)
 163 #define CONFIG_ENV_SIZE         0x2000
 164 #else
 165 #define CONFIG_ENV_IS_IN_FLASH
 166 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 167 #define CONFIG_ENV_SIZE         0x2000
 168 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 169 #endif
 170
 171 #ifndef __ASSEMBLY__
 172 unsigned long get_board_sys_clk(void);
 173 unsigned long get_board_ddr_clk(void);
 174 #endif
 175
 176 #define CONFIG_SYS_CLK_FREQ     66660000
 177 #define CONFIG_DDR_CLK_FREQ     133330000
 178
 179 /*
 180  * Config the L3 Cache as L3 SRAM
 181  */
 182 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 183 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 184 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 185 #ifdef CONFIG_RAMBOOT_PBL
 186 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 187 #endif
 188 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 189 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 190 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 191 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 192
 193 #define CONFIG_SYS_DCSRBAR      0xf0000000
 194 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 195
 196 /* EEPROM */
 197 #define CONFIG_ID_EEPROM
 198 #define CONFIG_SYS_I2C_EEPROM_NXID
 199 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 200 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 201 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 202
 203 /*
 204  * DDR Setup
 205  */
 206 #define CONFIG_VERY_BIG_RAM
 207 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 208 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 209 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 210 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 211 #define CONFIG_DDR_SPD
 212 #define CONFIG_SYS_FSL_DDR3
 213 #undef CONFIG_FSL_DDR_INTERACTIVE
 214 #define CONFIG_SYS_SPD_BUS_NUM  0
 215 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 216 #define SPD_EEPROM_ADDRESS1     0x51
 217 #define SPD_EEPROM_ADDRESS2     0x52
 218 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 219 #define CTRL_INTLV_PREFERED     cacheline
 220
 221 /*
 222  * IFC Definitions
 223  */
 224 #define CONFIG_SYS_FLASH_BASE           0xe8000000
 225 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 226 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 227 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 228                                 CSPR_PORT_SIZE_16 | \
 229                                 CSPR_MSEL_NOR | \
 230                                 CSPR_V)
 231 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 232
 233 /* NOR Flash Timing Params */
 234 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 235
 236 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 237                                 FTIM0_NOR_TEADC(0x5) | \
 238                                 FTIM0_NOR_TEAHC(0x5))
 239 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 240                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 241                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 242 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 243                                 FTIM2_NOR_TCH(0x4) | \
 244                                 FTIM2_NOR_TWPH(0x0E) | \
 245                                 FTIM2_NOR_TWP(0x1c))
 246 #define CONFIG_SYS_NOR_FTIM3    0x0
 247
 248 #define CONFIG_SYS_FLASH_QUIET_TEST
 249 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 250
 251 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 252 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 253 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 254 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 255 #define CONFIG_SYS_FLASH_EMPTY_INFO
 256 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS }
 257
 258 /* CPLD on IFC */
 259 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 260 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 261 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 262 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 263                                 | CSPR_PORT_SIZE_8 \
 264                                 | CSPR_MSEL_GPCM \
 265                                 | CSPR_V)
 266 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 267 #define CONFIG_SYS_CSOR2        0x0
 268
 269 /* CPLD Timing parameters for IFC CS2 */
 270 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 271                                         FTIM0_GPCM_TEADC(0x0e) | \
 272                                         FTIM0_GPCM_TEAHC(0x0e))
 273 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 274                                         FTIM1_GPCM_TRAD(0x1f))
 275 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 276                                         FTIM2_GPCM_TCH(0x8) | \
 277                                         FTIM2_GPCM_TWP(0x1f))
 278 #define CONFIG_SYS_CS2_FTIM3            0x0
 279
 280 /* NAND Flash on IFC */
 281 #define CONFIG_NAND_FSL_IFC
 282 #define CONFIG_SYS_NAND_BASE            0xff800000
 283 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 284
 285 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 286 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 287                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 288                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 289                                 | CSPR_V)
 290 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 291
 292 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 293                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 294                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 295                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 296                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 297                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 298                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 299
 300 #define CONFIG_SYS_NAND_ONFI_DETECTION
 301
 302 /* ONFI NAND Flash mode0 Timing Params */
 303 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 304                                         FTIM0_NAND_TWP(0x18)    | \
 305                                         FTIM0_NAND_TWCHT(0x07)  | \
 306                                         FTIM0_NAND_TWH(0x0a))
 307 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 308                                         FTIM1_NAND_TWBE(0x39)   | \
 309                                         FTIM1_NAND_TRR(0x0e)    | \
 310                                         FTIM1_NAND_TRP(0x18))
 311 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 312                                         FTIM2_NAND_TREH(0x0a)   | \
 313                                         FTIM2_NAND_TWHRE(0x1e))
 314 #define CONFIG_SYS_NAND_FTIM3           0x0
 315
 316 #define CONFIG_SYS_NAND_DDR_LAW         11
 317 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 318 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 319 #define CONFIG_CMD_NAND
 320 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 321
 322 #if defined(CONFIG_NAND)
 323 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 324 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 325 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 326 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 327 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 328 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 329 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 330 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 331 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 332 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 333 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 334 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 335 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 336 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 337 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 338 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 339 #else
 340 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 341 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 342 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 343 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 344 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 345 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 346 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 347 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 348 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 349 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 350 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 351 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 352 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 353 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 354 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 355 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 356 #endif
 357
 358 #if defined(CONFIG_RAMBOOT_PBL)
 359 #define CONFIG_SYS_RAMBOOT
 360 #endif
 361
 362 #ifdef CONFIG_SPL_BUILD
 363 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SPL_TEXT_BASE
 364 #else
 365 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SYS_TEXT_BASE /* start of monitor */
 366 #endif
 367
 368 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 369 #define CONFIG_MISC_INIT_R
 370 #define CONFIG_HWCONFIG
 371
 372 /* define to use L1 as initial stack */
 373 #define CONFIG_L1_INIT_RAM
 374 #define CONFIG_SYS_INIT_RAM_LOCK
 375 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 376 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 377 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 378 /* The assembler doesn't like typecast */
 379 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 380                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 381                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 382 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 383 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 384                                                 GENERATED_GBL_DATA_SIZE)
 385 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 386 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 387 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 388
 389 /*
 390  * Serial Port
 391  */
 392 #define CONFIG_CONS_INDEX               1
 393 #define CONFIG_SYS_NS16550_SERIAL
 394 #define CONFIG_SYS_NS16550_REG_SIZE     1
 395 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 396 #define CONFIG_SYS_BAUDRATE_TABLE       \
 397         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 398 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 399 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 400 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 401 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 402
 403 /*
 404  * I2C
 405  */
 406 #define CONFIG_SYS_I2C
 407 #define CONFIG_SYS_I2C_FSL
 408 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 409 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 410 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 411 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 412 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 413 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 414 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 415 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 416 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 417 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 418 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 419 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 420 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 421 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 422 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 423 #define I2C_MUX_CH_DEFAULT      0x8
 424
 425 #define I2C_MUX_CH_VOL_MONITOR  0xa
 426
 427 #define CONFIG_VID_FLS_ENV              "t208xrdb_vdd_mv"
 428 #ifndef CONFIG_SPL_BUILD
 429 #define CONFIG_VID
 430 #endif
 431 #define CONFIG_VOL_MONITOR_IR36021_SET
 432 #define CONFIG_VOL_MONITOR_IR36021_READ
 433 /* The lowest and highest voltage allowed for T208xRDB */
 434 #define VDD_MV_MIN                      819
 435 #define VDD_MV_MAX                      1212
 436
 437 /*
 438  * RapidIO
 439  */
 440 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 441 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 442 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 443 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 444 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 445 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 446 /*
 447  * for slave u-boot IMAGE instored in master memory space,
 448  * PHYS must be aligned based on the SIZE
 449  */
 450 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 451 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 452 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 453 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 454 /*
 455  * for slave UCODE and ENV instored in master memory space,
 456  * PHYS must be aligned based on the SIZE
 457  */
 458 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 459 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 460 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 461
 462 /* slave core release by master*/
 463 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 464 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 465
 466 /*
 467  * SRIO_PCIE_BOOT - SLAVE
 468  */
 469 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 470 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 471 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 472                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 473 #endif
 474
 475 /*
 476  * eSPI - Enhanced SPI
 477  */
 478 #ifdef CONFIG_SPI_FLASH
 479 #define CONFIG_SPI_FLASH_BAR
 480 #define CONFIG_SF_DEFAULT_SPEED  10000000
 481 #define CONFIG_SF_DEFAULT_MODE    0
 482 #endif
 483
 484 /*
 485  * General PCI
 486  * Memory space is mapped 1-1, but I/O space must start from 0.
 487  */
 488 #define CONFIG_PCIE1            /* PCIE controller 1 */
 489 #define CONFIG_PCIE2            /* PCIE controller 2 */
 490 #define CONFIG_PCIE3            /* PCIE controller 3 */
 491 #define CONFIG_PCIE4            /* PCIE controller 4 */
 492 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 493 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 494 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 495 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 496 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 497 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 498 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 499 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 500 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 501 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 502 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 503
 504 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 505 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 506 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 507 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 508 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 509 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 510 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 511 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 512 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 513
 514 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 515 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 516 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 517 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 518 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 519 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 520 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 521 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 522 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 523
 524 /* controller 4, Base address 203000 */
 525 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 526 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 527 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 528 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 529 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 530 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 531 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 532
 533 #ifdef CONFIG_PCI
 534 #define CONFIG_PCI_INDIRECT_BRIDGE
 535 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
 536 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 537 #define CONFIG_DOS_PARTITION
 538 #endif
 539
 540 /* Qman/Bman */
 541 #ifndef CONFIG_NOBQFMAN
 542 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 543 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 544 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 545 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 546 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 547 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 548 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 549 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 550 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 551 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 552                                         CONFIG_SYS_BMAN_CENA_SIZE)
 553 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 554 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 555 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 556 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 557 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 558 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 559 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 560 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 561 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 562 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 563 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 564                                         CONFIG_SYS_QMAN_CENA_SIZE)
 565 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 566 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 567
 568 #define CONFIG_SYS_DPAA_FMAN
 569 #define CONFIG_SYS_DPAA_PME
 570 #define CONFIG_SYS_PMAN
 571 #define CONFIG_SYS_DPAA_DCE
 572 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 573 #define CONFIG_SYS_INTERLAKEN
 574
 575 /* Default address of microcode for the Linux Fman driver */
 576 #if defined(CONFIG_SPIFLASH)
 577 /*
 578  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 579  * env, so we got 0x110000.
 580  */
 581 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 582 #define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 583 #define CONFIG_SYS_FMAN_FW_ADDR         0x110000
 584 #define CONFIG_CORTINA_FW_ADDR          0x120000
 585
 586 #elif defined(CONFIG_SDCARD)
 587 /*
 588  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 589  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 590  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 591  */
 592 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 593 #define CONFIG_SYS_CORTINA_FW_IN_MMC
 594 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 595 #define CONFIG_CORTINA_FW_ADDR          (512 * 0x8a0)
 596
 597 #elif defined(CONFIG_NAND)
 598 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 599 #define CONFIG_SYS_CORTINA_FW_IN_NAND
 600 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 601 #define CONFIG_CORTINA_FW_ADDR          (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 602 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 603 /*
 604  * Slave has no ucode locally, it can fetch this from remote. When implementing
 605  * in two corenet boards, slave's ucode could be stored in master's memory
 606  * space, the address can be mapped from slave TLB->slave LAW->
 607  * slave SRIO or PCIE outbound window->master inbound window->
 608  * master LAW->the ucode address in master's memory space.
 609  */
 610 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 611 #define CONFIG_SYS_CORTINA_FW_IN_REMOTE
 612 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 613 #define CONFIG_CORTINA_FW_ADDR          0xFFE10000
 614 #else
 615 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 616 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 617 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 618 #define CONFIG_CORTINA_FW_ADDR          0xEFE00000
 619 #endif
 620 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 621 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 622 #endif /* CONFIG_NOBQFMAN */
 623
 624 #ifdef CONFIG_SYS_DPAA_FMAN
 625 #define CONFIG_FMAN_ENET
 626 #define CONFIG_PHYLIB_10G
 627 #define CONFIG_PHY_AQUANTIA
 628 #define CONFIG_PHY_CORTINA
 629 #define CONFIG_PHY_REALTEK
 630 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 631 #define RGMII_PHY1_ADDR         0x01  /* RealTek RTL8211E */
 632 #define RGMII_PHY2_ADDR         0x02
 633 #define CORTINA_PHY_ADDR1       0x0c  /* Cortina CS4315 */
 634 #define CORTINA_PHY_ADDR2       0x0d
 635 #define FM1_10GEC3_PHY_ADDR     0x00  /* Aquantia AQ1202 10G Base-T */
 636 #define FM1_10GEC4_PHY_ADDR     0x01
 637 #endif
 638
 639 #ifdef CONFIG_FMAN_ENET
 640 #define CONFIG_MII              /* MII PHY management */
 641 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 642 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 643 #endif
 644
 645 /*
 646  * SATA
 647  */
 648 #ifdef CONFIG_FSL_SATA_V2
 649 #define CONFIG_LIBATA
 650 #define CONFIG_FSL_SATA
 651 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 652 #define CONFIG_SATA1
 653 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 654 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 655 #define CONFIG_SATA2
 656 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 657 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 658 #define CONFIG_LBA48
 659 #define CONFIG_CMD_SATA
 660 #define CONFIG_DOS_PARTITION
 661 #endif
 662
 663 /*
 664  * USB
 665  */
 666 #ifdef CONFIG_USB_EHCI
 667 #define CONFIG_USB_EHCI_FSL
 668 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 669 #define CONFIG_HAS_FSL_DR_USB
 670 #endif
 671
 672 /*
 673  * SDHC
 674  */
 675 #ifdef CONFIG_MMC
 676 #define CONFIG_FSL_ESDHC
 677 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 678 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 679 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 680 #define CONFIG_GENERIC_MMC
 681 #define CONFIG_DOS_PARTITION
 682 #endif
 683
 684 /*
 685  * Dynamic MTD Partition support with mtdparts
 686  */
 687 #ifndef CONFIG_SYS_NO_FLASH
 688 #define CONFIG_MTD_DEVICE
 689 #define CONFIG_MTD_PARTITIONS
 690 #define CONFIG_CMD_MTDPARTS
 691 #define CONFIG_FLASH_CFI_MTD
 692 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 693                         "spi0=spife110000.1"
 694 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 695                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 696                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:" \
 697                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 698 #endif
 699
 700 /*
 701  * Environment
 702  */
 703
 704 /*
 705  * Command line configuration.
 706  */
 707 #define CONFIG_CMD_ERRATA
 708 #define CONFIG_CMD_REGINFO
 709
 710 #ifdef CONFIG_PCI
 711 #define CONFIG_CMD_PCI
 712 #endif
 713
 714 /* Hash command with SHA acceleration supported in hardware */
 715 #ifdef CONFIG_FSL_CAAM
 716 #define CONFIG_CMD_HASH
 717 #define CONFIG_SHA_HW_ACCEL
 718 #endif
 719
 720 /*
 721  * Miscellaneous configurable options
 722  */
 723 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 724 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 725 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 726 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 727 #ifdef CONFIG_CMD_KGDB
 728 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 729 #else
 730 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 731 #endif
 732 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 733 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 734 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 735
 736 /*
 737  * For booting Linux, the board info and command line data
 738  * have to be in the first 64 MB of memory, since this is
 739  * the maximum mapped by the Linux kernel during initialization.
 740  */
 741 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 742 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 743
 744 #ifdef CONFIG_CMD_KGDB
 745 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 746 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 747 #endif
 748
 749 /*
 750  * Environment Configuration
 751  */
 752 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 753 #define CONFIG_BOOTFILE  "uImage"
 754 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 755
 756 /* default location for tftp and bootm */
 757 #define CONFIG_LOADADDR         1000000
 758 #define CONFIG_BAUDRATE         115200
 759 #define __USB_PHY_TYPE          utmi
 760
 761 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 762         "hwconfig=fsl_ddr:"                                     \
 763         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 764         "bank_intlv=auto;"                                      \
 765         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 766         "netdev=eth0\0"                                         \
 767         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 768         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 769         "tftpflash=tftpboot $loadaddr $uboot && "               \
 770         "protect off $ubootaddr +$filesize && "                 \
 771         "erase $ubootaddr +$filesize && "                       \
 772         "cp.b $loadaddr $ubootaddr $filesize && "               \
 773         "protect on $ubootaddr +$filesize && "                  \
 774         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 775         "consoledev=ttyS0\0"                                    \
 776         "ramdiskaddr=2000000\0"                                 \
 777         "ramdiskfile=t2080rdb/ramdisk.uboot\0"                  \
 778         "fdtaddr=1e00000\0"                                     \
 779         "fdtfile=t2080rdb/t2080rdb.dtb\0"                       \
 780         "bdev=sda3\0"
 781
 782 /*
 783  * For emulation this causes u-boot to jump to the start of the
 784  * proof point app code automatically
 785  */
 786 #define CONFIG_PROOF_POINTS                             \
 787         "setenv bootargs root=/dev/$bdev rw "           \
 788         "console=$consoledev,$baudrate $othbootargs;"   \
 789         "cpu 1 release 0x29000000 - - -;"               \
 790         "cpu 2 release 0x29000000 - - -;"               \
 791         "cpu 3 release 0x29000000 - - -;"               \
 792         "cpu 4 release 0x29000000 - - -;"               \
 793         "cpu 5 release 0x29000000 - - -;"               \
 794         "cpu 6 release 0x29000000 - - -;"               \
 795         "cpu 7 release 0x29000000 - - -;"               \
 796         "go 0x29000000"
 797
 798 #define CONFIG_HVBOOT                           \
 799         "setenv bootargs config-addr=0x60000000; "      \
 800         "bootm 0x01000000 - 0x00f00000"
 801
 802 #define CONFIG_ALU                              \
 803         "setenv bootargs root=/dev/$bdev rw "           \
 804         "console=$consoledev,$baudrate $othbootargs;"   \
 805         "cpu 1 release 0x01000000 - - -;"               \
 806         "cpu 2 release 0x01000000 - - -;"               \
 807         "cpu 3 release 0x01000000 - - -;"               \
 808         "cpu 4 release 0x01000000 - - -;"               \
 809         "cpu 5 release 0x01000000 - - -;"               \
 810         "cpu 6 release 0x01000000 - - -;"               \
 811         "cpu 7 release 0x01000000 - - -;"               \
 812         "go 0x01000000"
 813
 814 #define CONFIG_LINUX                            \
 815         "setenv bootargs root=/dev/ram rw "             \
 816         "console=$consoledev,$baudrate $othbootargs;"   \
 817         "setenv ramdiskaddr 0x02000000;"                \
 818         "setenv fdtaddr 0x00c00000;"                    \
 819         "setenv loadaddr 0x1000000;"                    \
 820         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 821
 822 #define CONFIG_HDBOOT                                   \
 823         "setenv bootargs root=/dev/$bdev rw "           \
 824         "console=$consoledev,$baudrate $othbootargs;"   \
 825         "tftp $loadaddr $bootfile;"                     \
 826         "tftp $fdtaddr $fdtfile;"                       \
 827         "bootm $loadaddr - $fdtaddr"
 828
 829 #define CONFIG_NFSBOOTCOMMAND                   \
 830         "setenv bootargs root=/dev/nfs rw "     \
 831         "nfsroot=$serverip:$rootpath "          \
 832         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 833         "console=$consoledev,$baudrate $othbootargs;"   \
 834         "tftp $loadaddr $bootfile;"             \
 835         "tftp $fdtaddr $fdtfile;"               \
 836         "bootm $loadaddr - $fdtaddr"
 837
 838 #define CONFIG_RAMBOOTCOMMAND                           \
 839         "setenv bootargs root=/dev/ram rw "             \
 840         "console=$consoledev,$baudrate $othbootargs;"   \
 841         "tftp $ramdiskaddr $ramdiskfile;"               \
 842         "tftp $loadaddr $bootfile;"                     \
 843         "tftp $fdtaddr $fdtfile;"                       \
 844         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 845
 846 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 847
 848 #include <asm/fsl_secure_boot.h>
 849
 850 #endif  /* __T2080RDB_H */