include/configs/T208xQDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  16 #define CONFIG_MMC
  17 #define CONFIG_USB_EHCI
  18 #if defined(CONFIG_PPC_T2080)
  19 #define CONFIG_T2080QDS
  20 #define CONFIG_FSL_SATA_V2
  21 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  22 #define CONFIG_SRIO1            /* SRIO port 1 */
  23 #define CONFIG_SRIO2            /* SRIO port 2 */
  24 #elif defined(CONFIG_PPC_T2081)
  25 #define CONFIG_T2081QDS
  26 #endif
  27
  28 /* High Level Configuration Options */
  29 #define CONFIG_BOOKE
  30 #define CONFIG_E500             /* BOOKE e500 family */
  31 #define CONFIG_E500MC           /* BOOKE e500mc family */
  32 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  33 #define CONFIG_MP               /* support multiple processors */
  34 #define CONFIG_ENABLE_36BIT_PHYS
  35
  36 #ifdef CONFIG_PHYS_64BIT
  37 #define CONFIG_ADDR_MAP 1
  38 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  39 #endif
  40
  41 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  42 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  43 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  44 #define CONFIG_FSL_CAAM         /* Enable SEC/CAAM */
  45 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  46 #define CONFIG_ENV_OVERWRITE
  47
  48 #ifdef CONFIG_RAMBOOT_PBL
  49 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  50 #if defined(CONFIG_PPC_T2080)
  51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_rcw.cfg
  52 #elif defined(CONFIG_PPC_T2081)
  53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
  54 #endif
  55
  56 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  57 #define CONFIG_SPL_SERIAL_SUPPORT
  58 #define CONFIG_SPL_FLUSH_IMAGE
  59 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  60 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  61 #define CONFIG_SYS_TEXT_BASE            0x00201000
  62 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  63 #define CONFIG_SPL_PAD_TO               0x40000
  64 #define CONFIG_SPL_MAX_SIZE             0x28000
  65 #define RESET_VECTOR_OFFSET             0x27FFC
  66 #define BOOT_PAGE_OFFSET                0x27000
  67 #ifdef CONFIG_SPL_BUILD
  68 #define CONFIG_SPL_SKIP_RELOCATE
  69 #define CONFIG_SPL_COMMON_INIT_DDR
  70 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  71 #define CONFIG_SYS_NO_FLASH
  72 #endif
  73
  74 #ifdef CONFIG_NAND
  75 #define CONFIG_SPL_NAND_SUPPORT
  76 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  77 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  78 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  79 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  80 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  81 #define CONFIG_SPL_NAND_BOOT
  82 #endif
  83
  84 #ifdef CONFIG_SPIFLASH
  85 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  86 #define CONFIG_SPL_SPI_SUPPORT
  87 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  88 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  89 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  90 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  93 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  94 #ifndef CONFIG_SPL_BUILD
  95 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  96 #endif
  97 #define CONFIG_SPL_SPI_BOOT
  98 #endif
  99
 100 #ifdef CONFIG_SDCARD
 101 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
 102 #define CONFIG_SPL_MMC_SUPPORT
 103 #define CONFIG_SPL_MMC_MINIMAL
 104 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 105 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
 106 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
 107 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 108 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 109 #ifndef CONFIG_SPL_BUILD
 110 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 111 #endif
 112 #define CONFIG_SPL_MMC_BOOT
 113 #endif
 114
 115 #endif /* CONFIG_RAMBOOT_PBL */
 116
 117 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 118 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 119 /* Set 1M boot space */
 120 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 121 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 122                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 123 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 124 #define CONFIG_SYS_NO_FLASH
 125 #endif
 126
 127 #ifndef CONFIG_SYS_TEXT_BASE
 128 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 129 #endif
 130
 131 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 132 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 133 #endif
 134
 135 /*
 136  * These can be toggled for performance analysis, otherwise use default.
 137  */
 138 #define CONFIG_SYS_CACHE_STASHING
 139 #define CONFIG_BTB              /* toggle branch predition */
 140 #define CONFIG_DDR_ECC
 141 #ifdef CONFIG_DDR_ECC
 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 143 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 144 #endif
 145
 146 #ifndef CONFIG_SYS_NO_FLASH
 147 #define CONFIG_FLASH_CFI_DRIVER
 148 #define CONFIG_SYS_FLASH_CFI
 149 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 150 #endif
 151
 152 #if defined(CONFIG_SPIFLASH)
 153 #define CONFIG_SYS_EXTRA_ENV_RELOC
 154 #define CONFIG_ENV_IS_IN_SPI_FLASH
 155 #define CONFIG_ENV_SPI_BUS      0
 156 #define CONFIG_ENV_SPI_CS       0
 157 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 158 #define CONFIG_ENV_SPI_MODE     0
 159 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 160 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 161 #define CONFIG_ENV_SECT_SIZE    0x10000
 162 #elif defined(CONFIG_SDCARD)
 163 #define CONFIG_SYS_EXTRA_ENV_RELOC
 164 #define CONFIG_ENV_IS_IN_MMC
 165 #define CONFIG_SYS_MMC_ENV_DEV  0
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 168 #elif defined(CONFIG_NAND)
 169 #define CONFIG_SYS_EXTRA_ENV_RELOC
 170 #define CONFIG_ENV_IS_IN_NAND
 171 #define CONFIG_ENV_SIZE         0x2000
 172 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 173 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 174 #define CONFIG_ENV_IS_IN_REMOTE
 175 #define CONFIG_ENV_ADDR         0xffe20000
 176 #define CONFIG_ENV_SIZE         0x2000
 177 #elif defined(CONFIG_ENV_IS_NOWHERE)
 178 #define CONFIG_ENV_SIZE         0x2000
 179 #else
 180 #define CONFIG_ENV_IS_IN_FLASH
 181 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 182 #define CONFIG_ENV_SIZE         0x2000
 183 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 184 #endif
 185
 186 #ifndef __ASSEMBLY__
 187 unsigned long get_board_sys_clk(void);
 188 unsigned long get_board_ddr_clk(void);
 189 #endif
 190
 191 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 192 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 193
 194 /*
 195  * Config the L3 Cache as L3 SRAM
 196  */
 197 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 198 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 199 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 200 #ifdef CONFIG_RAMBOOT_PBL
 201 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 202 #endif
 203 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 204 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 205 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 206 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 207
 208 #define CONFIG_SYS_DCSRBAR      0xf0000000
 209 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 210
 211 /* EEPROM */
 212 #define CONFIG_ID_EEPROM
 213 #define CONFIG_SYS_I2C_EEPROM_NXID
 214 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 215 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 217
 218 /*
 219  * DDR Setup
 220  */
 221 #define CONFIG_VERY_BIG_RAM
 222 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 223 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 224 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 225 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 226 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 227 #define CONFIG_DDR_SPD
 228 #define CONFIG_SYS_FSL_DDR3
 229 #define CONFIG_FSL_DDR_INTERACTIVE
 230 #define CONFIG_SYS_SPD_BUS_NUM  0
 231 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 232 #define SPD_EEPROM_ADDRESS1     0x51
 233 #define SPD_EEPROM_ADDRESS2     0x52
 234 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 235 #define CTRL_INTLV_PREFERED     cacheline
 236
 237 /*
 238  * IFC Definitions
 239  */
 240 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 241 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 242 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 243 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 244                                 + 0x8000000) | \
 245                                 CSPR_PORT_SIZE_16 | \
 246                                 CSPR_MSEL_NOR | \
 247                                 CSPR_V)
 248 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 249 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 250                                 CSPR_PORT_SIZE_16 | \
 251                                 CSPR_MSEL_NOR | \
 252                                 CSPR_V)
 253 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 254 /* NOR Flash Timing Params */
 255 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 256
 257 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 258                                 FTIM0_NOR_TEADC(0x5) | \
 259                                 FTIM0_NOR_TEAHC(0x5))
 260 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 261                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 262                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 263 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 264                                 FTIM2_NOR_TCH(0x4) | \
 265                                 FTIM2_NOR_TWPH(0x0E) | \
 266                                 FTIM2_NOR_TWP(0x1c))
 267 #define CONFIG_SYS_NOR_FTIM3    0x0
 268
 269 #define CONFIG_SYS_FLASH_QUIET_TEST
 270 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 271
 272 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 273 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 274 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 275 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 276
 277 #define CONFIG_SYS_FLASH_EMPTY_INFO
 278 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 279                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 280
 281 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 282 #define QIXIS_BASE                      0xffdf0000
 283 #define QIXIS_LBMAP_SWITCH              6
 284 #define QIXIS_LBMAP_MASK                0x0f
 285 #define QIXIS_LBMAP_SHIFT               0
 286 #define QIXIS_LBMAP_DFLTBANK            0x00
 287 #define QIXIS_LBMAP_ALTBANK             0x04
 288 #define QIXIS_LBMAP_NAND                0x09
 289 #define QIXIS_LBMAP_SD                  0x00
 290 #define QIXIS_RCW_SRC_NAND              0x104
 291 #define QIXIS_RCW_SRC_SD                0x040
 292 #define QIXIS_RST_CTL_RESET             0x83
 293 #define QIXIS_RST_FORCE_MEM             0x1
 294 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 295 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 296 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 297 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 298
 299 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 300 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 301                                 | CSPR_PORT_SIZE_8 \
 302                                 | CSPR_MSEL_GPCM \
 303                                 | CSPR_V)
 304 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 305 #define CONFIG_SYS_CSOR3        0x0
 306 /* QIXIS Timing parameters for IFC CS3 */
 307 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 308                                         FTIM0_GPCM_TEADC(0x0e) | \
 309                                         FTIM0_GPCM_TEAHC(0x0e))
 310 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 311                                         FTIM1_GPCM_TRAD(0x3f))
 312 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 313                                         FTIM2_GPCM_TCH(0x8) | \
 314                                         FTIM2_GPCM_TWP(0x1f))
 315 #define CONFIG_SYS_CS3_FTIM3            0x0
 316
 317 /* NAND Flash on IFC */
 318 #define CONFIG_NAND_FSL_IFC
 319 #define CONFIG_SYS_NAND_BASE            0xff800000
 320 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 321
 322 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 323 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 324                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 325                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 326                                 | CSPR_V)
 327 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 328
 329 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 330                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 331                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 332                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 333                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 334                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 335                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 336
 337 #define CONFIG_SYS_NAND_ONFI_DETECTION
 338
 339 /* ONFI NAND Flash mode0 Timing Params */
 340 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 341                                         FTIM0_NAND_TWP(0x18)    | \
 342                                         FTIM0_NAND_TWCHT(0x07)  | \
 343                                         FTIM0_NAND_TWH(0x0a))
 344 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 345                                         FTIM1_NAND_TWBE(0x39)   | \
 346                                         FTIM1_NAND_TRR(0x0e)    | \
 347                                         FTIM1_NAND_TRP(0x18))
 348 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 349                                         FTIM2_NAND_TREH(0x0a)   | \
 350                                         FTIM2_NAND_TWHRE(0x1e))
 351 #define CONFIG_SYS_NAND_FTIM3           0x0
 352
 353 #define CONFIG_SYS_NAND_DDR_LAW         11
 354 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 355 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 356 #define CONFIG_CMD_NAND
 357 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 358
 359 #if defined(CONFIG_NAND)
 360 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 368 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 369 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 370 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 371 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 372 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 373 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 374 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 375 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 376 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 377 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 378 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 384 #else
 385 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 386 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 387 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 388 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 389 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 390 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 391 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 392 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 393 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 394 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 395 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 396 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 397 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 398 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 399 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 400 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 401 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 402 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 403 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 404 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 405 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 406 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 407 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 408 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 409 #endif
 410
 411 #if defined(CONFIG_RAMBOOT_PBL)
 412 #define CONFIG_SYS_RAMBOOT
 413 #endif
 414
 415 #ifdef CONFIG_SPL_BUILD
 416 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 417 #else
 418 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 419 #endif
 420
 421 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 422 #define CONFIG_MISC_INIT_R
 423 #define CONFIG_HWCONFIG
 424
 425 /* define to use L1 as initial stack */
 426 #define CONFIG_L1_INIT_RAM
 427 #define CONFIG_SYS_INIT_RAM_LOCK
 428 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 429 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 431 /* The assembler doesn't like typecast */
 432 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 433                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 434                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 435 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 436 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 437                                                 GENERATED_GBL_DATA_SIZE)
 438 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 439 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 440 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 441
 442 /*
 443  * Serial Port
 444  */
 445 #define CONFIG_CONS_INDEX               1
 446 #define CONFIG_SYS_NS16550_SERIAL
 447 #define CONFIG_SYS_NS16550_REG_SIZE     1
 448 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 449 #define CONFIG_SYS_BAUDRATE_TABLE       \
 450         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 451 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 452 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 453 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 454 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 455
 456 /*
 457  * I2C
 458  */
 459 #define CONFIG_SYS_I2C
 460 #define CONFIG_SYS_I2C_FSL
 461 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 462 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 463 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 464 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 465 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 466 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 467 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 468 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 469 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 470 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 471 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 472 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 473 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 474 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 475 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 476 #define I2C_MUX_CH_DEFAULT      0x8
 477
 478 #define I2C_MUX_CH_VOL_MONITOR 0xa
 479
 480 /* Voltage monitor on channel 2*/
 481 #define I2C_VOL_MONITOR_ADDR           0x40
 482 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 483 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 484 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 485
 486 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 487 #ifndef CONFIG_SPL_BUILD
 488 #define CONFIG_VID
 489 #endif
 490 #define CONFIG_VOL_MONITOR_IR36021_SET
 491 #define CONFIG_VOL_MONITOR_IR36021_READ
 492 /* The lowest and highest voltage allowed for T208xQDS */
 493 #define VDD_MV_MIN                      819
 494 #define VDD_MV_MAX                      1212
 495
 496 /*
 497  * RapidIO
 498  */
 499 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 500 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 501 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 502 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 503 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 504 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 505 /*
 506  * for slave u-boot IMAGE instored in master memory space,
 507  * PHYS must be aligned based on the SIZE
 508  */
 509 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 510 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 511 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 512 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 513 /*
 514  * for slave UCODE and ENV instored in master memory space,
 515  * PHYS must be aligned based on the SIZE
 516  */
 517 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 518 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 519 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 520
 521 /* slave core release by master*/
 522 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 523 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 524
 525 /*
 526  * SRIO_PCIE_BOOT - SLAVE
 527  */
 528 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 529 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 530 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 531                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 532 #endif
 533
 534 /*
 535  * eSPI - Enhanced SPI
 536  */
 537 #ifdef CONFIG_SPI_FLASH
 538 #ifndef CONFIG_SPL_BUILD
 539 #endif
 540
 541 #define CONFIG_SPI_FLASH_BAR
 542 #define CONFIG_SF_DEFAULT_SPEED  10000000
 543 #define CONFIG_SF_DEFAULT_MODE    0
 544 #endif
 545
 546 /*
 547  * General PCI
 548  * Memory space is mapped 1-1, but I/O space must start from 0.
 549  */
 550 #define CONFIG_PCI              /* Enable PCI/PCIE */
 551 #define CONFIG_PCIE1            /* PCIE controller 1 */
 552 #define CONFIG_PCIE2            /* PCIE controller 2 */
 553 #define CONFIG_PCIE3            /* PCIE controller 3 */
 554 #define CONFIG_PCIE4            /* PCIE controller 4 */
 555 #define CONFIG_FSL_PCIE_RESET
 556 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 557 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 558 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 559 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 560 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 561 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 562 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 563 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 564 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 565 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 566 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 567
 568 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 569 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 570 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 571 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 572 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 573 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 574 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 575 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 576 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 577
 578 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 579 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 580 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 581 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 582 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 583 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 584 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 585 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 586 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 587
 588 /* controller 4, Base address 203000 */
 589 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 590 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 591 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 592 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 593 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 594 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 595 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 596
 597 #ifdef CONFIG_PCI
 598 #define CONFIG_PCI_INDIRECT_BRIDGE
 599 #define CONFIG_FSL_PCIE_RESET      /* need PCIe reset errata */
 600 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 601 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 602 #define CONFIG_DOS_PARTITION
 603 #endif
 604
 605 /* Qman/Bman */
 606 #ifndef CONFIG_NOBQFMAN
 607 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 608 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 609 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 610 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 611 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 612 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 613 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 614 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 615 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 616 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 617                                         CONFIG_SYS_BMAN_CENA_SIZE)
 618 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 619 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 620 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 621 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 622 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 623 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 624 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 625 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 626 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 627 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 628 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 629                                         CONFIG_SYS_QMAN_CENA_SIZE)
 630 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 631 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 632
 633 #define CONFIG_SYS_DPAA_FMAN
 634 #define CONFIG_SYS_DPAA_PME
 635 #define CONFIG_SYS_PMAN
 636 #define CONFIG_SYS_DPAA_DCE
 637 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 638 #define CONFIG_SYS_INTERLAKEN
 639
 640 /* Default address of microcode for the Linux Fman driver */
 641 #if defined(CONFIG_SPIFLASH)
 642 /*
 643  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 644  * env, so we got 0x110000.
 645  */
 646 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 647 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 648 #elif defined(CONFIG_SDCARD)
 649 /*
 650  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 651  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 652  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 653  */
 654 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 655 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 656 #elif defined(CONFIG_NAND)
 657 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 658 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 659 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 660 /*
 661  * Slave has no ucode locally, it can fetch this from remote. When implementing
 662  * in two corenet boards, slave's ucode could be stored in master's memory
 663  * space, the address can be mapped from slave TLB->slave LAW->
 664  * slave SRIO or PCIE outbound window->master inbound window->
 665  * master LAW->the ucode address in master's memory space.
 666  */
 667 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 668 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 669 #else
 670 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 671 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 672 #endif
 673 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 674 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 675 #endif /* CONFIG_NOBQFMAN */
 676
 677 #ifdef CONFIG_SYS_DPAA_FMAN
 678 #define CONFIG_FMAN_ENET
 679 #define CONFIG_PHYLIB_10G
 680 #define CONFIG_PHY_VITESSE
 681 #define CONFIG_PHY_REALTEK
 682 #define CONFIG_PHY_TERANETICS
 683 #define RGMII_PHY1_ADDR 0x1
 684 #define RGMII_PHY2_ADDR 0x2
 685 #define FM1_10GEC1_PHY_ADDR       0x3
 686 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 687 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 688 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 689 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 690 #endif
 691
 692 #ifdef CONFIG_FMAN_ENET
 693 #define CONFIG_MII              /* MII PHY management */
 694 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 695 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 696 #endif
 697
 698 /*
 699  * SATA
 700  */
 701 #ifdef CONFIG_FSL_SATA_V2
 702 #define CONFIG_LIBATA
 703 #define CONFIG_FSL_SATA
 704 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 705 #define CONFIG_SATA1
 706 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 707 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 708 #define CONFIG_SATA2
 709 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 710 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 711 #define CONFIG_LBA48
 712 #define CONFIG_CMD_SATA
 713 #define CONFIG_DOS_PARTITION
 714 #endif
 715
 716 /*
 717  * USB
 718  */
 719 #ifdef CONFIG_USB_EHCI
 720 #define CONFIG_USB_EHCI_FSL
 721 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 722 #define CONFIG_HAS_FSL_DR_USB
 723 #endif
 724
 725 /*
 726  * SDHC
 727  */
 728 #ifdef CONFIG_MMC
 729 #define CONFIG_FSL_ESDHC
 730 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 731 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 732 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 733 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 734 #define CONFIG_GENERIC_MMC
 735 #define CONFIG_DOS_PARTITION
 736 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 737 #endif
 738
 739 /*
 740  * Dynamic MTD Partition support with mtdparts
 741  */
 742 #ifndef CONFIG_SYS_NO_FLASH
 743 #define CONFIG_MTD_DEVICE
 744 #define CONFIG_MTD_PARTITIONS
 745 #define CONFIG_CMD_MTDPARTS
 746 #define CONFIG_FLASH_CFI_MTD
 747 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 748                         "spi0=spife110000.0"
 749 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 750                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 751                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 752                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 753 #endif
 754
 755 /*
 756  * Environment
 757  */
 758 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 759 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 760
 761 /*
 762  * Command line configuration.
 763  */
 764 #define CONFIG_CMD_ERRATA
 765 #define CONFIG_CMD_IRQ
 766 #define CONFIG_CMD_REGINFO
 767
 768 #ifdef CONFIG_PCI
 769 #define CONFIG_CMD_PCI
 770 #endif
 771
 772 /* Hash command with SHA acceleration supported in hardware */
 773 #ifdef CONFIG_FSL_CAAM
 774 #define CONFIG_CMD_HASH
 775 #define CONFIG_SHA_HW_ACCEL
 776 #endif
 777
 778 /*
 779  * Miscellaneous configurable options
 780  */
 781 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 782 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 783 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 784 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 785 #ifdef CONFIG_CMD_KGDB
 786 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 787 #else
 788 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 789 #endif
 790 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 791 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 792 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 793
 794 /*
 795  * For booting Linux, the board info and command line data
 796  * have to be in the first 64 MB of memory, since this is
 797  * the maximum mapped by the Linux kernel during initialization.
 798  */
 799 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 800 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 801
 802 #ifdef CONFIG_CMD_KGDB
 803 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 804 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 805 #endif
 806
 807 /*
 808  * Environment Configuration
 809  */
 810 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 811 #define CONFIG_BOOTFILE  "uImage"
 812 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 813
 814 /* default location for tftp and bootm */
 815 #define CONFIG_LOADADDR         1000000
 816 #define CONFIG_BAUDRATE         115200
 817 #define __USB_PHY_TYPE          utmi
 818
 819 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 820         "hwconfig=fsl_ddr:"                                     \
 821         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 822         "bank_intlv=auto;"                                      \
 823         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 824         "netdev=eth0\0"                                         \
 825         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 826         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 827         "tftpflash=tftpboot $loadaddr $uboot && "               \
 828         "protect off $ubootaddr +$filesize && "                 \
 829         "erase $ubootaddr +$filesize && "                       \
 830         "cp.b $loadaddr $ubootaddr $filesize && "               \
 831         "protect on $ubootaddr +$filesize && "                  \
 832         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 833         "consoledev=ttyS0\0"                                    \
 834         "ramdiskaddr=2000000\0"                                 \
 835         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 836         "fdtaddr=1e00000\0"                                     \
 837         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 838         "bdev=sda3\0"
 839
 840 /*
 841  * For emulation this causes u-boot to jump to the start of the
 842  * proof point app code automatically
 843  */
 844 #define CONFIG_PROOF_POINTS                             \
 845         "setenv bootargs root=/dev/$bdev rw "           \
 846         "console=$consoledev,$baudrate $othbootargs;"   \
 847         "cpu 1 release 0x29000000 - - -;"               \
 848         "cpu 2 release 0x29000000 - - -;"               \
 849         "cpu 3 release 0x29000000 - - -;"               \
 850         "cpu 4 release 0x29000000 - - -;"               \
 851         "cpu 5 release 0x29000000 - - -;"               \
 852         "cpu 6 release 0x29000000 - - -;"               \
 853         "cpu 7 release 0x29000000 - - -;"               \
 854         "go 0x29000000"
 855
 856 #define CONFIG_HVBOOT                           \
 857         "setenv bootargs config-addr=0x60000000; "      \
 858         "bootm 0x01000000 - 0x00f00000"
 859
 860 #define CONFIG_ALU                              \
 861         "setenv bootargs root=/dev/$bdev rw "           \
 862         "console=$consoledev,$baudrate $othbootargs;"   \
 863         "cpu 1 release 0x01000000 - - -;"               \
 864         "cpu 2 release 0x01000000 - - -;"               \
 865         "cpu 3 release 0x01000000 - - -;"               \
 866         "cpu 4 release 0x01000000 - - -;"               \
 867         "cpu 5 release 0x01000000 - - -;"               \
 868         "cpu 6 release 0x01000000 - - -;"               \
 869         "cpu 7 release 0x01000000 - - -;"               \
 870         "go 0x01000000"
 871
 872 #define CONFIG_LINUX                            \
 873         "setenv bootargs root=/dev/ram rw "             \
 874         "console=$consoledev,$baudrate $othbootargs;"   \
 875         "setenv ramdiskaddr 0x02000000;"                \
 876         "setenv fdtaddr 0x00c00000;"                    \
 877         "setenv loadaddr 0x1000000;"                    \
 878         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 879
 880 #define CONFIG_HDBOOT                                   \
 881         "setenv bootargs root=/dev/$bdev rw "           \
 882         "console=$consoledev,$baudrate $othbootargs;"   \
 883         "tftp $loadaddr $bootfile;"                     \
 884         "tftp $fdtaddr $fdtfile;"                       \
 885         "bootm $loadaddr - $fdtaddr"
 886
 887 #define CONFIG_NFSBOOTCOMMAND                   \
 888         "setenv bootargs root=/dev/nfs rw "     \
 889         "nfsroot=$serverip:$rootpath "          \
 890         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 891         "console=$consoledev,$baudrate $othbootargs;"   \
 892         "tftp $loadaddr $bootfile;"             \
 893         "tftp $fdtaddr $fdtfile;"               \
 894         "bootm $loadaddr - $fdtaddr"
 895
 896 #define CONFIG_RAMBOOTCOMMAND                           \
 897         "setenv bootargs root=/dev/ram rw "             \
 898         "console=$consoledev,$baudrate $othbootargs;"   \
 899         "tftp $ramdiskaddr $ramdiskfile;"               \
 900         "tftp $loadaddr $bootfile;"                     \
 901         "tftp $fdtaddr $fdtfile;"                       \
 902         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 903
 904 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 905
 906 #include <asm/fsl_secure_boot.h>
 907
 908 #endif  /* __T208xQDS_H */