include/configs/T208xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #include <linux/stringify.h>
  15
  16 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  17 #if defined(CONFIG_ARCH_T2080)
  18 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  19 #define CONFIG_SRIO1            /* SRIO port 1 */
  20 #define CONFIG_SRIO2            /* SRIO port 2 */
  21 #endif
  22
  23 /* High Level Configuration Options */
  24 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  25
  26 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  27 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  28
  29 #ifdef CONFIG_RAMBOOT_PBL
  30 #define RESET_VECTOR_OFFSET             0x27FFC
  31 #define BOOT_PAGE_OFFSET                0x27000
  32
  33 #ifdef CONFIG_MTD_RAW_NAND
  34 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  35 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  36 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  37 #endif
  38
  39 #ifdef CONFIG_SPIFLASH
  40 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  41 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  45 #endif
  46
  47 #ifdef CONFIG_SDCARD
  48 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  49 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  50 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  51 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  52 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  53 #endif
  54
  55 #endif /* CONFIG_RAMBOOT_PBL */
  56
  57 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  58 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  59 /* Set 1M boot space */
  60 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  61 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  62                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  63 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  64 #endif
  65
  66 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  67 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  68 #endif
  69
  70 /*
  71  * These can be toggled for performance analysis, otherwise use default.
  72  */
  73 #define CONFIG_SYS_CACHE_STASHING
  74 #ifdef CONFIG_DDR_ECC
  75 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  76 #endif
  77
  78 /*
  79  * Config the L3 Cache as L3 SRAM
  80  */
  81 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  82 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  83 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  84
  85 #define CONFIG_SYS_DCSRBAR      0xf0000000
  86 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
  87
  88 /* EEPROM */
  89 #define CONFIG_SYS_I2C_EEPROM_NXID
  90 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  91
  92 /*
  93  * DDR Setup
  94  */
  95 #define CONFIG_VERY_BIG_RAM
  96 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  97 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  98 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
  99 #define SPD_EEPROM_ADDRESS1     0x51
 100 #define SPD_EEPROM_ADDRESS2     0x52
 101 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 102 #define CTRL_INTLV_PREFERED     cacheline
 103
 104 /*
 105  * IFC Definitions
 106  */
 107 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 108 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 109 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 110 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 111                                 + 0x8000000) | \
 112                                 CSPR_PORT_SIZE_16 | \
 113                                 CSPR_MSEL_NOR | \
 114                                 CSPR_V)
 115 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 116 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 117                                 CSPR_PORT_SIZE_16 | \
 118                                 CSPR_MSEL_NOR | \
 119                                 CSPR_V)
 120 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 121 /* NOR Flash Timing Params */
 122 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 123
 124 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 125                                 FTIM0_NOR_TEADC(0x5) | \
 126                                 FTIM0_NOR_TEAHC(0x5))
 127 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 128                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 129                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 130 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 131                                 FTIM2_NOR_TCH(0x4) | \
 132                                 FTIM2_NOR_TWPH(0x0E) | \
 133                                 FTIM2_NOR_TWP(0x1c))
 134 #define CONFIG_SYS_NOR_FTIM3    0x0
 135
 136 #define CONFIG_SYS_FLASH_QUIET_TEST
 137 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 138
 139 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 140 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 141 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 142
 143 #define CONFIG_SYS_FLASH_EMPTY_INFO
 144 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 145                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 146
 147 #define QIXIS_BASE                      0xffdf0000
 148 #define QIXIS_LBMAP_SWITCH              6
 149 #define QIXIS_LBMAP_MASK                0x0f
 150 #define QIXIS_LBMAP_SHIFT               0
 151 #define QIXIS_LBMAP_DFLTBANK            0x00
 152 #define QIXIS_LBMAP_ALTBANK             0x04
 153 #define QIXIS_LBMAP_NAND                0x09
 154 #define QIXIS_LBMAP_SD                  0x00
 155 #define QIXIS_RCW_SRC_NAND              0x104
 156 #define QIXIS_RCW_SRC_SD                0x040
 157 #define QIXIS_RST_CTL_RESET             0x83
 158 #define QIXIS_RST_FORCE_MEM             0x1
 159 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 160 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 161 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 162 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 163
 164 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 165 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 166                                 | CSPR_PORT_SIZE_8 \
 167                                 | CSPR_MSEL_GPCM \
 168                                 | CSPR_V)
 169 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 170 #define CONFIG_SYS_CSOR3        0x0
 171 /* QIXIS Timing parameters for IFC CS3 */
 172 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 173                                         FTIM0_GPCM_TEADC(0x0e) | \
 174                                         FTIM0_GPCM_TEAHC(0x0e))
 175 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 176                                         FTIM1_GPCM_TRAD(0x3f))
 177 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 178                                         FTIM2_GPCM_TCH(0x8) | \
 179                                         FTIM2_GPCM_TWP(0x1f))
 180 #define CONFIG_SYS_CS3_FTIM3            0x0
 181
 182 /* NAND Flash on IFC */
 183 #define CONFIG_SYS_NAND_BASE            0xff800000
 184 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 185
 186 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 187 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 188                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 189                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 190                                 | CSPR_V)
 191 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 192
 193 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 194                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 195                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 196                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 197                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 198                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 199                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 200
 201 /* ONFI NAND Flash mode0 Timing Params */
 202 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 203                                         FTIM0_NAND_TWP(0x18)    | \
 204                                         FTIM0_NAND_TWCHT(0x07)  | \
 205                                         FTIM0_NAND_TWH(0x0a))
 206 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 207                                         FTIM1_NAND_TWBE(0x39)   | \
 208                                         FTIM1_NAND_TRR(0x0e)    | \
 209                                         FTIM1_NAND_TRP(0x18))
 210 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 211                                         FTIM2_NAND_TREH(0x0a)   | \
 212                                         FTIM2_NAND_TWHRE(0x1e))
 213 #define CONFIG_SYS_NAND_FTIM3           0x0
 214
 215 #define CONFIG_SYS_NAND_DDR_LAW         11
 216 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 217 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 218
 219 #if defined(CONFIG_MTD_RAW_NAND)
 220 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 221 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 222 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 223 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 224 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 225 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 226 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 227 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 228 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 229 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 230 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 231 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 232 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 233 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 234 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 235 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 236 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 237 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 238 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 239 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 240 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 241 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 242 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 243 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 244 #else
 245 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 246 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 247 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 248 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 249 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 250 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 251 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 252 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 253 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 254 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 255 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 256 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 257 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 258 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 259 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 260 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 261 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 262 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 263 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 264 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 265 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 266 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 267 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 268 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 269 #endif
 270
 271 #if defined(CONFIG_RAMBOOT_PBL)
 272 #define CONFIG_SYS_RAMBOOT
 273 #endif
 274
 275 #define CONFIG_HWCONFIG
 276
 277 /* define to use L1 as initial stack */
 278 #define CONFIG_L1_INIT_RAM
 279 #define CONFIG_SYS_INIT_RAM_LOCK
 280 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 281 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 282 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 283 /* The assembler doesn't like typecast */
 284 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 285                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 286                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 287 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 288 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 289 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 290
 291 /*
 292  * Serial Port
 293  */
 294 #define CONFIG_SYS_NS16550_SERIAL
 295 #define CONFIG_SYS_NS16550_REG_SIZE     1
 296 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 297 #define CONFIG_SYS_BAUDRATE_TABLE       \
 298         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 299 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 300 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 301 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 302 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 303
 304 /*
 305  * I2C
 306  */
 307
 308 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 309 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 310 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 311 #define I2C_MUX_CH_DEFAULT      0x8
 312
 313 #define I2C_MUX_CH_VOL_MONITOR 0xa
 314
 315 /* Voltage monitor on channel 2*/
 316 #define I2C_VOL_MONITOR_ADDR           0x40
 317 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 318 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 319 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 320
 321 /* The lowest and highest voltage allowed for T208xQDS */
 322 #define VDD_MV_MIN                      819
 323 #define VDD_MV_MAX                      1212
 324
 325 /*
 326  * RapidIO
 327  */
 328 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 329 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 330 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 331 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 332 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 333 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 334 /*
 335  * for slave u-boot IMAGE instored in master memory space,
 336  * PHYS must be aligned based on the SIZE
 337  */
 338 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 339 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 340 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 341 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 342 /*
 343  * for slave UCODE and ENV instored in master memory space,
 344  * PHYS must be aligned based on the SIZE
 345  */
 346 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 347 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 348 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 349
 350 /* slave core release by master*/
 351 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 352 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 353
 354 /*
 355  * SRIO_PCIE_BOOT - SLAVE
 356  */
 357 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 358 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 359 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 360                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 361 #endif
 362
 363 /*
 364  * eSPI - Enhanced SPI
 365  */
 366
 367 /*
 368  * General PCI
 369  * Memory space is mapped 1-1, but I/O space must start from 0.
 370  */
 371 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 372 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 373 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 374 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 375 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 376
 377 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 378 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 379 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 380 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 381 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 382
 383 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 384 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 385 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 386 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 387 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 388
 389 /* controller 4, Base address 203000 */
 390 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 391 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 392 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 393
 394 /* Qman/Bman */
 395 #ifndef CONFIG_NOBQFMAN
 396 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 397 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 398 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 399 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 400 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 401 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 402 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 403 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 404 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 405                                         CONFIG_SYS_BMAN_CENA_SIZE)
 406 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 407 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 408 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 409 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 410 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 411 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 412 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 413 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 414 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 415 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 416 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 417                                         CONFIG_SYS_QMAN_CENA_SIZE)
 418 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 419 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 420
 421 #define CONFIG_SYS_DPAA_FMAN
 422 #define CONFIG_SYS_DPAA_PME
 423 #define CONFIG_SYS_PMAN
 424 #define CONFIG_SYS_DPAA_DCE
 425 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 426 #define CONFIG_SYS_INTERLAKEN
 427
 428 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 429 #endif /* CONFIG_NOBQFMAN */
 430
 431 #ifdef CONFIG_SYS_DPAA_FMAN
 432 #define RGMII_PHY1_ADDR 0x1
 433 #define RGMII_PHY2_ADDR 0x2
 434 #define FM1_10GEC1_PHY_ADDR       0x3
 435 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 436 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 437 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 438 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 439 #endif
 440
 441 /*
 442  * USB
 443  */
 444
 445 /*
 446  * SDHC
 447  */
 448 #ifdef CONFIG_MMC
 449 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 450 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 451 #endif
 452
 453 /*
 454  * Dynamic MTD Partition support with mtdparts
 455  */
 456
 457 /*
 458  * Environment
 459  */
 460 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 461 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 462
 463 /*
 464  * Miscellaneous configurable options
 465  */
 466
 467 /*
 468  * For booting Linux, the board info and command line data
 469  * have to be in the first 64 MB of memory, since this is
 470  * the maximum mapped by the Linux kernel during initialization.
 471  */
 472 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 473 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 474
 475 /*
 476  * Environment Configuration
 477  */
 478 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 479 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 480
 481 #define __USB_PHY_TYPE          utmi
 482
 483 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 484         "hwconfig=fsl_ddr:"                                     \
 485         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 486         "bank_intlv=auto;"                                      \
 487         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 488         "netdev=eth0\0"                                         \
 489         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 490         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 491         "tftpflash=tftpboot $loadaddr $uboot && "               \
 492         "protect off $ubootaddr +$filesize && "                 \
 493         "erase $ubootaddr +$filesize && "                       \
 494         "cp.b $loadaddr $ubootaddr $filesize && "               \
 495         "protect on $ubootaddr +$filesize && "                  \
 496         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 497         "consoledev=ttyS0\0"                                    \
 498         "ramdiskaddr=2000000\0"                                 \
 499         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 500         "fdtaddr=1e00000\0"                                     \
 501         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 502         "bdev=sda3\0"
 503
 504 /*
 505  * For emulation this causes u-boot to jump to the start of the
 506  * proof point app code automatically
 507  */
 508 #define PROOF_POINTS                            \
 509         "setenv bootargs root=/dev/$bdev rw "           \
 510         "console=$consoledev,$baudrate $othbootargs;"   \
 511         "cpu 1 release 0x29000000 - - -;"               \
 512         "cpu 2 release 0x29000000 - - -;"               \
 513         "cpu 3 release 0x29000000 - - -;"               \
 514         "cpu 4 release 0x29000000 - - -;"               \
 515         "cpu 5 release 0x29000000 - - -;"               \
 516         "cpu 6 release 0x29000000 - - -;"               \
 517         "cpu 7 release 0x29000000 - - -;"               \
 518         "go 0x29000000"
 519
 520 #define HVBOOT                          \
 521         "setenv bootargs config-addr=0x60000000; "      \
 522         "bootm 0x01000000 - 0x00f00000"
 523
 524 #define ALU                             \
 525         "setenv bootargs root=/dev/$bdev rw "           \
 526         "console=$consoledev,$baudrate $othbootargs;"   \
 527         "cpu 1 release 0x01000000 - - -;"               \
 528         "cpu 2 release 0x01000000 - - -;"               \
 529         "cpu 3 release 0x01000000 - - -;"               \
 530         "cpu 4 release 0x01000000 - - -;"               \
 531         "cpu 5 release 0x01000000 - - -;"               \
 532         "cpu 6 release 0x01000000 - - -;"               \
 533         "cpu 7 release 0x01000000 - - -;"               \
 534         "go 0x01000000"
 535
 536 #include <asm/fsl_secure_boot.h>
 537
 538 #endif  /* __T208xQDS_H */