include/configs/T208xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T2080/T2081 QDS board configuration file
   8  */
   9
  10 #ifndef __T208xQDS_H
  11 #define __T208xQDS_H
  12
  13 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  14 #if defined(CONFIG_ARCH_T2080)
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  17 #define CONFIG_SRIO1            /* SRIO port 1 */
  18 #define CONFIG_SRIO2            /* SRIO port 2 */
  19 #elif defined(CONFIG_ARCH_T2081)
  20 #endif
  21
  22 /* High Level Configuration Options */
  23 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  24 #define CONFIG_ENABLE_36BIT_PHYS
  25
  26 #ifdef CONFIG_PHYS_64BIT
  27 #define CONFIG_ADDR_MAP 1
  28 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  29 #endif
  30
  31 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  32 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 #ifdef CONFIG_RAMBOOT_PBL
  36 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  37
  38 #define CONFIG_SPL_FLUSH_IMAGE
  39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  40 #define CONFIG_SPL_PAD_TO               0x40000
  41 #define CONFIG_SPL_MAX_SIZE             0x28000
  42 #define RESET_VECTOR_OFFSET             0x27FFC
  43 #define BOOT_PAGE_OFFSET                0x27000
  44 #ifdef CONFIG_SPL_BUILD
  45 #define CONFIG_SPL_SKIP_RELOCATE
  46 #define CONFIG_SPL_COMMON_INIT_DDR
  47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  48 #endif
  49
  50 #ifdef CONFIG_NAND
  51 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  52 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  53 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  54 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  55 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  56 #if defined(CONFIG_ARCH_T2080)
  57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
  58 #elif defined(CONFIG_ARCH_T2081)
  59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
  60 #endif
  61 #define CONFIG_SPL_NAND_BOOT
  62 #endif
  63
  64 #ifdef CONFIG_SPIFLASH
  65 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  66 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  71 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  72 #ifndef CONFIG_SPL_BUILD
  73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  74 #endif
  75 #if defined(CONFIG_ARCH_T2080)
  76 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
  77 #elif defined(CONFIG_ARCH_T2081)
  78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
  79 #endif
  80 #define CONFIG_SPL_SPI_BOOT
  81 #endif
  82
  83 #ifdef CONFIG_SDCARD
  84 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  85 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  86 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  87 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  88 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  89 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  90 #ifndef CONFIG_SPL_BUILD
  91 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  92 #endif
  93 #if defined(CONFIG_ARCH_T2080)
  94 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
  95 #elif defined(CONFIG_ARCH_T2081)
  96 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
  97 #endif
  98 #define CONFIG_SPL_MMC_BOOT
  99 #endif
 100
 101 #endif /* CONFIG_RAMBOOT_PBL */
 102
 103 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 104 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 105 /* Set 1M boot space */
 106 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 107 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 108                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 109 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 110 #endif
 111
 112 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 113 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 114 #endif
 115
 116 /*
 117  * These can be toggled for performance analysis, otherwise use default.
 118  */
 119 #define CONFIG_SYS_CACHE_STASHING
 120 #define CONFIG_BTB              /* toggle branch predition */
 121 #define CONFIG_DDR_ECC
 122 #ifdef CONFIG_DDR_ECC
 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 #if defined(CONFIG_SPIFLASH)
 128 #define CONFIG_ENV_SPI_BUS      0
 129 #define CONFIG_ENV_SPI_CS       0
 130 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 131 #define CONFIG_ENV_SPI_MODE     0
 132 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 133 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 134 #define CONFIG_ENV_SECT_SIZE    0x10000
 135 #elif defined(CONFIG_SDCARD)
 136 #define CONFIG_SYS_MMC_ENV_DEV  0
 137 #define CONFIG_ENV_SIZE         0x2000
 138 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 139 #elif defined(CONFIG_NAND)
 140 #define CONFIG_ENV_SIZE         0x2000
 141 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 142 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 143 #define CONFIG_ENV_ADDR         0xffe20000
 144 #define CONFIG_ENV_SIZE         0x2000
 145 #elif defined(CONFIG_ENV_IS_NOWHERE)
 146 #define CONFIG_ENV_SIZE         0x2000
 147 #else
 148 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 149 #define CONFIG_ENV_SIZE         0x2000
 150 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 151 #endif
 152
 153 #ifndef __ASSEMBLY__
 154 unsigned long get_board_sys_clk(void);
 155 unsigned long get_board_ddr_clk(void);
 156 #endif
 157
 158 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 159 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 160
 161 /*
 162  * Config the L3 Cache as L3 SRAM
 163  */
 164 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 165 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 166 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 167 #ifdef CONFIG_RAMBOOT_PBL
 168 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 169 #endif
 170 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 171 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 172 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 173
 174 #define CONFIG_SYS_DCSRBAR      0xf0000000
 175 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 176
 177 /* EEPROM */
 178 #define CONFIG_ID_EEPROM
 179 #define CONFIG_SYS_I2C_EEPROM_NXID
 180 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 181 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 182 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 183
 184 /*
 185  * DDR Setup
 186  */
 187 #define CONFIG_VERY_BIG_RAM
 188 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 189 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 190 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 191 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 192 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 193 #define CONFIG_DDR_SPD
 194 #define CONFIG_FSL_DDR_INTERACTIVE
 195 #define CONFIG_SYS_SPD_BUS_NUM  0
 196 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 197 #define SPD_EEPROM_ADDRESS1     0x51
 198 #define SPD_EEPROM_ADDRESS2     0x52
 199 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 200 #define CTRL_INTLV_PREFERED     cacheline
 201
 202 /*
 203  * IFC Definitions
 204  */
 205 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 206 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 207 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 208 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 209                                 + 0x8000000) | \
 210                                 CSPR_PORT_SIZE_16 | \
 211                                 CSPR_MSEL_NOR | \
 212                                 CSPR_V)
 213 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 214 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 215                                 CSPR_PORT_SIZE_16 | \
 216                                 CSPR_MSEL_NOR | \
 217                                 CSPR_V)
 218 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 219 /* NOR Flash Timing Params */
 220 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 221
 222 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 223                                 FTIM0_NOR_TEADC(0x5) | \
 224                                 FTIM0_NOR_TEAHC(0x5))
 225 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 226                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 227                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 228 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 229                                 FTIM2_NOR_TCH(0x4) | \
 230                                 FTIM2_NOR_TWPH(0x0E) | \
 231                                 FTIM2_NOR_TWP(0x1c))
 232 #define CONFIG_SYS_NOR_FTIM3    0x0
 233
 234 #define CONFIG_SYS_FLASH_QUIET_TEST
 235 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 236
 237 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 238 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 239 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 240 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 241
 242 #define CONFIG_SYS_FLASH_EMPTY_INFO
 243 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 244                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 245
 246 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 247 #define QIXIS_BASE                      0xffdf0000
 248 #define QIXIS_LBMAP_SWITCH              6
 249 #define QIXIS_LBMAP_MASK                0x0f
 250 #define QIXIS_LBMAP_SHIFT               0
 251 #define QIXIS_LBMAP_DFLTBANK            0x00
 252 #define QIXIS_LBMAP_ALTBANK             0x04
 253 #define QIXIS_LBMAP_NAND                0x09
 254 #define QIXIS_LBMAP_SD                  0x00
 255 #define QIXIS_RCW_SRC_NAND              0x104
 256 #define QIXIS_RCW_SRC_SD                0x040
 257 #define QIXIS_RST_CTL_RESET             0x83
 258 #define QIXIS_RST_FORCE_MEM             0x1
 259 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 260 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 261 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 262 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 263
 264 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 265 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 266                                 | CSPR_PORT_SIZE_8 \
 267                                 | CSPR_MSEL_GPCM \
 268                                 | CSPR_V)
 269 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 270 #define CONFIG_SYS_CSOR3        0x0
 271 /* QIXIS Timing parameters for IFC CS3 */
 272 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 273                                         FTIM0_GPCM_TEADC(0x0e) | \
 274                                         FTIM0_GPCM_TEAHC(0x0e))
 275 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 276                                         FTIM1_GPCM_TRAD(0x3f))
 277 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 278                                         FTIM2_GPCM_TCH(0x8) | \
 279                                         FTIM2_GPCM_TWP(0x1f))
 280 #define CONFIG_SYS_CS3_FTIM3            0x0
 281
 282 /* NAND Flash on IFC */
 283 #define CONFIG_NAND_FSL_IFC
 284 #define CONFIG_SYS_NAND_BASE            0xff800000
 285 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 286
 287 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 288 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 289                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 290                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 291                                 | CSPR_V)
 292 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 293
 294 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 295                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 296                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 297                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 298                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 299                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 300                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 301
 302 #define CONFIG_SYS_NAND_ONFI_DETECTION
 303
 304 /* ONFI NAND Flash mode0 Timing Params */
 305 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 306                                         FTIM0_NAND_TWP(0x18)    | \
 307                                         FTIM0_NAND_TWCHT(0x07)  | \
 308                                         FTIM0_NAND_TWH(0x0a))
 309 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 310                                         FTIM1_NAND_TWBE(0x39)   | \
 311                                         FTIM1_NAND_TRR(0x0e)    | \
 312                                         FTIM1_NAND_TRP(0x18))
 313 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 314                                         FTIM2_NAND_TREH(0x0a)   | \
 315                                         FTIM2_NAND_TWHRE(0x1e))
 316 #define CONFIG_SYS_NAND_FTIM3           0x0
 317
 318 #define CONFIG_SYS_NAND_DDR_LAW         11
 319 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 320 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 321 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 322
 323 #if defined(CONFIG_NAND)
 324 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 325 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 326 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 327 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 328 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 329 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 330 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 331 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 332 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 333 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 334 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 335 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 336 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 337 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 338 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 339 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 340 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 341 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 342 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 343 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 344 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 345 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 346 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 347 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 348 #else
 349 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 350 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 351 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 352 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 353 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 354 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 355 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 356 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 357 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 358 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 359 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 360 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 361 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 362 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 363 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 364 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 365 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 366 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 367 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 368 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 369 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 370 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 371 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 372 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 373 #endif
 374
 375 #if defined(CONFIG_RAMBOOT_PBL)
 376 #define CONFIG_SYS_RAMBOOT
 377 #endif
 378
 379 #ifdef CONFIG_SPL_BUILD
 380 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 381 #else
 382 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 383 #endif
 384
 385 #define CONFIG_HWCONFIG
 386
 387 /* define to use L1 as initial stack */
 388 #define CONFIG_L1_INIT_RAM
 389 #define CONFIG_SYS_INIT_RAM_LOCK
 390 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 391 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 392 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 393 /* The assembler doesn't like typecast */
 394 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 395                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 396                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 397 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 398 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 399                                                 GENERATED_GBL_DATA_SIZE)
 400 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 401 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 402 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 403
 404 /*
 405  * Serial Port
 406  */
 407 #define CONFIG_SYS_NS16550_SERIAL
 408 #define CONFIG_SYS_NS16550_REG_SIZE     1
 409 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 410 #define CONFIG_SYS_BAUDRATE_TABLE       \
 411         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 412 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 413 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 414 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 415 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 416
 417 /*
 418  * I2C
 419  */
 420 #define CONFIG_SYS_I2C
 421 #define CONFIG_SYS_I2C_FSL
 422 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 423 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 424 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 425 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 426 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 427 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 428 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 429 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 430 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 431 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 432 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 433 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 434 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 435 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 436 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 437 #define I2C_MUX_CH_DEFAULT      0x8
 438
 439 #define I2C_MUX_CH_VOL_MONITOR 0xa
 440
 441 /* Voltage monitor on channel 2*/
 442 #define I2C_VOL_MONITOR_ADDR           0x40
 443 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 444 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 445 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 446
 447 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 448 #ifndef CONFIG_SPL_BUILD
 449 #define CONFIG_VID
 450 #endif
 451 #define CONFIG_VOL_MONITOR_IR36021_SET
 452 #define CONFIG_VOL_MONITOR_IR36021_READ
 453 /* The lowest and highest voltage allowed for T208xQDS */
 454 #define VDD_MV_MIN                      819
 455 #define VDD_MV_MAX                      1212
 456
 457 /*
 458  * RapidIO
 459  */
 460 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 461 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 462 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 463 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 464 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 465 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 466 /*
 467  * for slave u-boot IMAGE instored in master memory space,
 468  * PHYS must be aligned based on the SIZE
 469  */
 470 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 471 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 472 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 473 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 474 /*
 475  * for slave UCODE and ENV instored in master memory space,
 476  * PHYS must be aligned based on the SIZE
 477  */
 478 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 479 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 480 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 481
 482 /* slave core release by master*/
 483 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 484 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 485
 486 /*
 487  * SRIO_PCIE_BOOT - SLAVE
 488  */
 489 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 490 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 491 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 492                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 493 #endif
 494
 495 /*
 496  * eSPI - Enhanced SPI
 497  */
 498 #ifdef CONFIG_SPI_FLASH
 499
 500 #define CONFIG_SPI_FLASH_BAR
 501 #define CONFIG_SF_DEFAULT_SPEED  10000000
 502 #define CONFIG_SF_DEFAULT_MODE    0
 503 #endif
 504
 505 /*
 506  * General PCI
 507  * Memory space is mapped 1-1, but I/O space must start from 0.
 508  */
 509 #define CONFIG_PCIE1            /* PCIE controller 1 */
 510 #define CONFIG_PCIE2            /* PCIE controller 2 */
 511 #define CONFIG_PCIE3            /* PCIE controller 3 */
 512 #define CONFIG_PCIE4            /* PCIE controller 4 */
 513 #define CONFIG_FSL_PCIE_RESET   /* pcie reset fix link width 2x-4x*/
 514 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 515 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 516 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 517 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 518 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 519 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 520 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 521 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 522 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 523 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 524 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 525
 526 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 527 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 528 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 529 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 530 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 531 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 532 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 533 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 534 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 535
 536 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 537 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 538 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 539 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 540 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 541 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 542 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 543 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 544 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 545
 546 /* controller 4, Base address 203000 */
 547 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 548 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 549 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 550 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 551 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 552 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 553 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 554
 555 #ifdef CONFIG_PCI
 556 #define CONFIG_PCI_INDIRECT_BRIDGE
 557 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 558 #endif
 559
 560 /* Qman/Bman */
 561 #ifndef CONFIG_NOBQFMAN
 562 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 563 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 564 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 565 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 566 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 567 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 568 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 569 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 570 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 571                                         CONFIG_SYS_BMAN_CENA_SIZE)
 572 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 573 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 574 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 575 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 576 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 577 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 578 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 579 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 580 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 581 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 582 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 583                                         CONFIG_SYS_QMAN_CENA_SIZE)
 584 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 585 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 586
 587 #define CONFIG_SYS_DPAA_FMAN
 588 #define CONFIG_SYS_DPAA_PME
 589 #define CONFIG_SYS_PMAN
 590 #define CONFIG_SYS_DPAA_DCE
 591 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 592 #define CONFIG_SYS_INTERLAKEN
 593
 594 /* Default address of microcode for the Linux Fman driver */
 595 #if defined(CONFIG_SPIFLASH)
 596 /*
 597  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 598  * env, so we got 0x110000.
 599  */
 600 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 601 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 602 #elif defined(CONFIG_SDCARD)
 603 /*
 604  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 605  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 606  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 607  */
 608 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 609 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 610 #elif defined(CONFIG_NAND)
 611 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 612 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 613 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 614 /*
 615  * Slave has no ucode locally, it can fetch this from remote. When implementing
 616  * in two corenet boards, slave's ucode could be stored in master's memory
 617  * space, the address can be mapped from slave TLB->slave LAW->
 618  * slave SRIO or PCIE outbound window->master inbound window->
 619  * master LAW->the ucode address in master's memory space.
 620  */
 621 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 622 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 623 #else
 624 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 625 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 626 #endif
 627 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 628 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 629 #endif /* CONFIG_NOBQFMAN */
 630
 631 #ifdef CONFIG_SYS_DPAA_FMAN
 632 #define CONFIG_FMAN_ENET
 633 #define CONFIG_PHY_VITESSE
 634 #define CONFIG_PHY_REALTEK
 635 #define CONFIG_PHY_TERANETICS
 636 #define RGMII_PHY1_ADDR 0x1
 637 #define RGMII_PHY2_ADDR 0x2
 638 #define FM1_10GEC1_PHY_ADDR       0x3
 639 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 640 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 641 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 642 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 643 #endif
 644
 645 #ifdef CONFIG_FMAN_ENET
 646 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 647 #endif
 648
 649 /*
 650  * SATA
 651  */
 652 #ifdef CONFIG_FSL_SATA_V2
 653 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 654 #define CONFIG_SATA1
 655 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 656 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 657 #define CONFIG_SATA2
 658 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 659 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 660 #define CONFIG_LBA48
 661 #endif
 662
 663 /*
 664  * USB
 665  */
 666 #ifdef CONFIG_USB_EHCI_HCD
 667 #define CONFIG_USB_EHCI_FSL
 668 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 669 #define CONFIG_HAS_FSL_DR_USB
 670 #endif
 671
 672 /*
 673  * SDHC
 674  */
 675 #ifdef CONFIG_MMC
 676 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 677 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 678 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 679 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 680 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 681 #endif
 682
 683 /*
 684  * Dynamic MTD Partition support with mtdparts
 685  */
 686
 687 /*
 688  * Environment
 689  */
 690 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 691 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 692
 693 /*
 694  * Miscellaneous configurable options
 695  */
 696 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 697
 698 /*
 699  * For booting Linux, the board info and command line data
 700  * have to be in the first 64 MB of memory, since this is
 701  * the maximum mapped by the Linux kernel during initialization.
 702  */
 703 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 704 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 705
 706 #ifdef CONFIG_CMD_KGDB
 707 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 708 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 709 #endif
 710
 711 /*
 712  * Environment Configuration
 713  */
 714 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 715 #define CONFIG_BOOTFILE  "uImage"
 716 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 717
 718 /* default location for tftp and bootm */
 719 #define CONFIG_LOADADDR         1000000
 720 #define __USB_PHY_TYPE          utmi
 721
 722 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 723         "hwconfig=fsl_ddr:"                                     \
 724         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 725         "bank_intlv=auto;"                                      \
 726         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 727         "netdev=eth0\0"                                         \
 728         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 729         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 730         "tftpflash=tftpboot $loadaddr $uboot && "               \
 731         "protect off $ubootaddr +$filesize && "                 \
 732         "erase $ubootaddr +$filesize && "                       \
 733         "cp.b $loadaddr $ubootaddr $filesize && "               \
 734         "protect on $ubootaddr +$filesize && "                  \
 735         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 736         "consoledev=ttyS0\0"                                    \
 737         "ramdiskaddr=2000000\0"                                 \
 738         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 739         "fdtaddr=1e00000\0"                                     \
 740         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 741         "bdev=sda3\0"
 742
 743 /*
 744  * For emulation this causes u-boot to jump to the start of the
 745  * proof point app code automatically
 746  */
 747 #define CONFIG_PROOF_POINTS                             \
 748         "setenv bootargs root=/dev/$bdev rw "           \
 749         "console=$consoledev,$baudrate $othbootargs;"   \
 750         "cpu 1 release 0x29000000 - - -;"               \
 751         "cpu 2 release 0x29000000 - - -;"               \
 752         "cpu 3 release 0x29000000 - - -;"               \
 753         "cpu 4 release 0x29000000 - - -;"               \
 754         "cpu 5 release 0x29000000 - - -;"               \
 755         "cpu 6 release 0x29000000 - - -;"               \
 756         "cpu 7 release 0x29000000 - - -;"               \
 757         "go 0x29000000"
 758
 759 #define CONFIG_HVBOOT                           \
 760         "setenv bootargs config-addr=0x60000000; "      \
 761         "bootm 0x01000000 - 0x00f00000"
 762
 763 #define CONFIG_ALU                              \
 764         "setenv bootargs root=/dev/$bdev rw "           \
 765         "console=$consoledev,$baudrate $othbootargs;"   \
 766         "cpu 1 release 0x01000000 - - -;"               \
 767         "cpu 2 release 0x01000000 - - -;"               \
 768         "cpu 3 release 0x01000000 - - -;"               \
 769         "cpu 4 release 0x01000000 - - -;"               \
 770         "cpu 5 release 0x01000000 - - -;"               \
 771         "cpu 6 release 0x01000000 - - -;"               \
 772         "cpu 7 release 0x01000000 - - -;"               \
 773         "go 0x01000000"
 774
 775 #define CONFIG_LINUX                            \
 776         "setenv bootargs root=/dev/ram rw "             \
 777         "console=$consoledev,$baudrate $othbootargs;"   \
 778         "setenv ramdiskaddr 0x02000000;"                \
 779         "setenv fdtaddr 0x00c00000;"                    \
 780         "setenv loadaddr 0x1000000;"                    \
 781         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 782
 783 #define CONFIG_HDBOOT                                   \
 784         "setenv bootargs root=/dev/$bdev rw "           \
 785         "console=$consoledev,$baudrate $othbootargs;"   \
 786         "tftp $loadaddr $bootfile;"                     \
 787         "tftp $fdtaddr $fdtfile;"                       \
 788         "bootm $loadaddr - $fdtaddr"
 789
 790 #define CONFIG_NFSBOOTCOMMAND                   \
 791         "setenv bootargs root=/dev/nfs rw "     \
 792         "nfsroot=$serverip:$rootpath "          \
 793         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 794         "console=$consoledev,$baudrate $othbootargs;"   \
 795         "tftp $loadaddr $bootfile;"             \
 796         "tftp $fdtaddr $fdtfile;"               \
 797         "bootm $loadaddr - $fdtaddr"
 798
 799 #define CONFIG_RAMBOOTCOMMAND                           \
 800         "setenv bootargs root=/dev/ram rw "             \
 801         "console=$consoledev,$baudrate $othbootargs;"   \
 802         "tftp $ramdiskaddr $ramdiskfile;"               \
 803         "tftp $loadaddr $bootfile;"                     \
 804         "tftp $fdtaddr $fdtfile;"                       \
 805         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 806
 807 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 808
 809 #include <asm/fsl_secure_boot.h>
 810
 811 #endif  /* __T208xQDS_H */