include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_E500                     /* BOOKE e500 family */
  17 #include <asm/config_mpc85xx.h>
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20
  21 #ifndef CONFIG_SECURE_BOOT
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  23 #else
  24 #define CONFIG_SYS_FSL_PBL_PBI \
  25                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  26 #endif
  27
  28 #ifdef CONFIG_T1040RDB
  29 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  30 #endif
  31 #ifdef CONFIG_T1042RDB_PI
  32 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  33 #endif
  34 #ifdef CONFIG_T1042RDB
  35 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  36 #endif
  37 #ifdef CONFIG_T1040D4RDB
  38 #define CONFIG_SYS_FSL_PBL_RCW \
  39 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
  40 #endif
  41 #ifdef CONFIG_T1042D4RDB
  42 #define CONFIG_SYS_FSL_PBL_RCW \
  43 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  44 #endif
  45
  46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  47 #define CONFIG_SPL_ENV_SUPPORT
  48 #define CONFIG_SPL_SERIAL_SUPPORT
  49 #define CONFIG_SPL_FLUSH_IMAGE
  50 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  51 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  52 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  53 #define CONFIG_SPL_I2C_SUPPORT
  54 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  55 #define CONFIG_SYS_TEXT_BASE            0x30001000
  56 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  57 #define CONFIG_SPL_PAD_TO               0x40000
  58 #define CONFIG_SPL_MAX_SIZE             0x28000
  59 #ifdef CONFIG_SPL_BUILD
  60 #define CONFIG_SPL_SKIP_RELOCATE
  61 #define CONFIG_SPL_COMMON_INIT_DDR
  62 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  63 #define CONFIG_SYS_NO_FLASH
  64 #endif
  65 #define RESET_VECTOR_OFFSET             0x27FFC
  66 #define BOOT_PAGE_OFFSET                0x27000
  67
  68 #ifdef CONFIG_NAND
  69 #define CONFIG_SPL_NAND_SUPPORT
  70 #ifdef CONFIG_SECURE_BOOT
  71 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  72 /*
  73  * HDR would be appended at end of image and copied to DDR along
  74  * with U-Boot image.
  75  */
  76 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  77                                          CONFIG_U_BOOT_HDR_SIZE)
  78 #else
  79 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  80 #endif
  81 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  82 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  83 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  84 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  85 #define CONFIG_SPL_NAND_BOOT
  86 #endif
  87
  88 #ifdef CONFIG_SPIFLASH
  89 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  90 #define CONFIG_SPL_SPI_SUPPORT
  91 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  92 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  93 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  94 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  95 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  96 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  97 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  98 #ifndef CONFIG_SPL_BUILD
  99 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 100 #endif
 101 #define CONFIG_SPL_SPI_BOOT
 102 #endif
 103
 104 #ifdef CONFIG_SDCARD
 105 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 106 #define CONFIG_SPL_MMC_SUPPORT
 107 #define CONFIG_SPL_MMC_MINIMAL
 108 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 109 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 110 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 111 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 112 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 113 #ifndef CONFIG_SPL_BUILD
 114 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 115 #endif
 116 #define CONFIG_SPL_MMC_BOOT
 117 #endif
 118
 119 #endif
 120
 121 /* High Level Configuration Options */
 122 #define CONFIG_BOOKE
 123 #define CONFIG_E500MC                   /* BOOKE e500mc family */
 124 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 125 #define CONFIG_MP                       /* support multiple processors */
 126
 127 /* support deep sleep */
 128 #define CONFIG_DEEP_SLEEP
 129 #if defined(CONFIG_DEEP_SLEEP)
 130 #define CONFIG_BOARD_EARLY_INIT_F
 131 #define CONFIG_SILENT_CONSOLE
 132 #endif
 133
 134 #ifndef CONFIG_SYS_TEXT_BASE
 135 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 136 #endif
 137
 138 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 139 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 140 #endif
 141
 142 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 143 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 144 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 145 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 146 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 147 #define CONFIG_PCI_INDIRECT_BRIDGE
 148 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 149 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 150 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 151 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 152
 153 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 154 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 155
 156 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 157
 158 #define CONFIG_ENV_OVERWRITE
 159
 160 #ifndef CONFIG_SYS_NO_FLASH
 161 #define CONFIG_FLASH_CFI_DRIVER
 162 #define CONFIG_SYS_FLASH_CFI
 163 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 164 #endif
 165
 166 #if defined(CONFIG_SPIFLASH)
 167 #define CONFIG_SYS_EXTRA_ENV_RELOC
 168 #define CONFIG_ENV_IS_IN_SPI_FLASH
 169 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 170 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 171 #define CONFIG_ENV_SECT_SIZE            0x10000
 172 #elif defined(CONFIG_SDCARD)
 173 #define CONFIG_SYS_EXTRA_ENV_RELOC
 174 #define CONFIG_ENV_IS_IN_MMC
 175 #define CONFIG_SYS_MMC_ENV_DEV          0
 176 #define CONFIG_ENV_SIZE                 0x2000
 177 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 178 #elif defined(CONFIG_NAND)
 179 #ifdef CONFIG_SECURE_BOOT
 180 #define CONFIG_RAMBOOT_NAND
 181 #define CONFIG_BOOTSCRIPT_COPY_RAM
 182 #endif
 183 #define CONFIG_SYS_EXTRA_ENV_RELOC
 184 #define CONFIG_ENV_IS_IN_NAND
 185 #define CONFIG_ENV_SIZE                 0x2000
 186 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 187 #else
 188 #define CONFIG_ENV_IS_IN_FLASH
 189 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 190 #define CONFIG_ENV_SIZE         0x2000
 191 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 192 #endif
 193
 194 #define CONFIG_SYS_CLK_FREQ     100000000
 195 #define CONFIG_DDR_CLK_FREQ     66666666
 196
 197 /*
 198  * These can be toggled for performance analysis, otherwise use default.
 199  */
 200 #define CONFIG_SYS_CACHE_STASHING
 201 #define CONFIG_BACKSIDE_L2_CACHE
 202 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 203 #define CONFIG_BTB                      /* toggle branch predition */
 204 #define CONFIG_DDR_ECC
 205 #ifdef CONFIG_DDR_ECC
 206 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 207 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 208 #endif
 209
 210 #define CONFIG_ENABLE_36BIT_PHYS
 211
 212 #define CONFIG_ADDR_MAP
 213 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 214
 215 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 216 #define CONFIG_SYS_MEMTEST_END          0x00400000
 217 #define CONFIG_SYS_ALT_MEMTEST
 218 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 219
 220 /*
 221  *  Config the L3 Cache as L3 SRAM
 222  */
 223 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 224 /*
 225  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 226  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 227  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 228  */
 229 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 230 #define CONFIG_SYS_L3_SIZE              256 << 10
 231 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 232 #ifdef CONFIG_RAMBOOT_PBL
 233 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 234 #endif
 235 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 236 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 237 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 238 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 239
 240 #define CONFIG_SYS_DCSRBAR              0xf0000000
 241 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 242
 243 /*
 244  * DDR Setup
 245  */
 246 #define CONFIG_VERY_BIG_RAM
 247 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 248 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 249
 250 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 251 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 252 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 253
 254 #define CONFIG_DDR_SPD
 255 #ifndef CONFIG_SYS_FSL_DDR4
 256 #define CONFIG_SYS_FSL_DDR3
 257 #endif
 258
 259 #define CONFIG_SYS_SPD_BUS_NUM  0
 260 #define SPD_EEPROM_ADDRESS      0x51
 261
 262 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 263
 264 /*
 265  * IFC Definitions
 266  */
 267 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 268 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 269
 270 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 271 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 272                                 CSPR_PORT_SIZE_16 | \
 273                                 CSPR_MSEL_NOR | \
 274                                 CSPR_V)
 275 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 276
 277 /*
 278  * TDM Definition
 279  */
 280 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 281
 282 /* NOR Flash Timing Params */
 283 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 284 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 285                                 FTIM0_NOR_TEADC(0x5) | \
 286                                 FTIM0_NOR_TEAHC(0x5))
 287 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 288                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 289                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 290 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 291                                 FTIM2_NOR_TCH(0x4) | \
 292                                 FTIM2_NOR_TWPH(0x0E) | \
 293                                 FTIM2_NOR_TWP(0x1c))
 294 #define CONFIG_SYS_NOR_FTIM3    0x0
 295
 296 #define CONFIG_SYS_FLASH_QUIET_TEST
 297 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 298
 299 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 300 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 301 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 302 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 303
 304 #define CONFIG_SYS_FLASH_EMPTY_INFO
 305 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 306
 307 /* CPLD on IFC */
 308 #define CPLD_LBMAP_MASK                 0x3F
 309 #define CPLD_BANK_SEL_MASK              0x07
 310 #define CPLD_BANK_OVERRIDE              0x40
 311 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 312 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 313 #define CPLD_LBMAP_RESET                0xFF
 314 #define CPLD_LBMAP_SHIFT                0x03
 315
 316 #if defined(CONFIG_T1042RDB_PI)
 317 #define CPLD_DIU_SEL_DFP                0x80
 318 #elif defined(CONFIG_T1042D4RDB)
 319 #define CPLD_DIU_SEL_DFP                0xc0
 320 #endif
 321
 322 #if defined(CONFIG_T1040D4RDB)
 323 #define CPLD_INT_MASK_ALL               0xFF
 324 #define CPLD_INT_MASK_THERM             0x80
 325 #define CPLD_INT_MASK_DVI_DFP           0x40
 326 #define CPLD_INT_MASK_QSGMII1           0x20
 327 #define CPLD_INT_MASK_QSGMII2           0x10
 328 #define CPLD_INT_MASK_SGMI1             0x08
 329 #define CPLD_INT_MASK_SGMI2             0x04
 330 #define CPLD_INT_MASK_TDMR1             0x02
 331 #define CPLD_INT_MASK_TDMR2             0x01
 332 #endif
 333
 334 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 335 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 336 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 337 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 338                                 | CSPR_PORT_SIZE_8 \
 339                                 | CSPR_MSEL_GPCM \
 340                                 | CSPR_V)
 341 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 342 #define CONFIG_SYS_CSOR2        0x0
 343 /* CPLD Timing parameters for IFC CS2 */
 344 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 345                                         FTIM0_GPCM_TEADC(0x0e) | \
 346                                         FTIM0_GPCM_TEAHC(0x0e))
 347 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 348                                         FTIM1_GPCM_TRAD(0x1f))
 349 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 350                                         FTIM2_GPCM_TCH(0x8) | \
 351                                         FTIM2_GPCM_TWP(0x1f))
 352 #define CONFIG_SYS_CS2_FTIM3            0x0
 353
 354 /* NAND Flash on IFC */
 355 #define CONFIG_NAND_FSL_IFC
 356 #define CONFIG_SYS_NAND_BASE            0xff800000
 357 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 358
 359 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 360 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 361                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 362                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 363                                 | CSPR_V)
 364 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 365
 366 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 367                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 368                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 369                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 370                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 371                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 372                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 373
 374 #define CONFIG_SYS_NAND_ONFI_DETECTION
 375
 376 /* ONFI NAND Flash mode0 Timing Params */
 377 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 378                                         FTIM0_NAND_TWP(0x18)   | \
 379                                         FTIM0_NAND_TWCHT(0x07) | \
 380                                         FTIM0_NAND_TWH(0x0a))
 381 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 382                                         FTIM1_NAND_TWBE(0x39)  | \
 383                                         FTIM1_NAND_TRR(0x0e)   | \
 384                                         FTIM1_NAND_TRP(0x18))
 385 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 386                                         FTIM2_NAND_TREH(0x0a) | \
 387                                         FTIM2_NAND_TWHRE(0x1e))
 388 #define CONFIG_SYS_NAND_FTIM3           0x0
 389
 390 #define CONFIG_SYS_NAND_DDR_LAW         11
 391 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 392 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 393 #define CONFIG_CMD_NAND
 394
 395 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 396
 397 #if defined(CONFIG_NAND)
 398 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 399 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 400 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 401 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 402 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 403 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 404 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 405 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 406 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 407 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 408 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 409 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 410 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 411 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 412 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 413 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 414 #else
 415 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 416 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 417 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 418 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 419 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 420 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 421 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 422 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 423 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 424 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 425 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 426 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 427 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 428 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 429 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 430 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 431 #endif
 432
 433 #ifdef CONFIG_SPL_BUILD
 434 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 435 #else
 436 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 437 #endif
 438
 439 #if defined(CONFIG_RAMBOOT_PBL)
 440 #define CONFIG_SYS_RAMBOOT
 441 #endif
 442
 443 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 444 #if defined(CONFIG_NAND)
 445 #define CONFIG_A008044_WORKAROUND
 446 #endif
 447 #endif
 448
 449 #define CONFIG_BOARD_EARLY_INIT_R
 450 #define CONFIG_MISC_INIT_R
 451
 452 #define CONFIG_HWCONFIG
 453
 454 /* define to use L1 as initial stack */
 455 #define CONFIG_L1_INIT_RAM
 456 #define CONFIG_SYS_INIT_RAM_LOCK
 457 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 459 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 460 /* The assembler doesn't like typecast */
 461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 462         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 463           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 464 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 465
 466 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 467                                         GENERATED_GBL_DATA_SIZE)
 468 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 469
 470 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 471 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 472
 473 /* Serial Port - controlled on board with jumper J8
 474  * open - index 2
 475  * shorted - index 1
 476  */
 477 #define CONFIG_CONS_INDEX       1
 478 #define CONFIG_SYS_NS16550_SERIAL
 479 #define CONFIG_SYS_NS16550_REG_SIZE     1
 480 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 481
 482 #define CONFIG_SYS_BAUDRATE_TABLE       \
 483         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 484
 485 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 486 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 487 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 488 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 489 #ifndef CONFIG_SPL_BUILD
 490 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 491 #endif
 492
 493 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 494 /* Video */
 495 #define CONFIG_FSL_DIU_FB
 496
 497 #ifdef CONFIG_FSL_DIU_FB
 498 #define CONFIG_FSL_DIU_CH7301
 499 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 500 #define CONFIG_VIDEO
 501 #define CONFIG_CMD_BMP
 502 #define CONFIG_CFB_CONSOLE
 503 #define CONFIG_CFB_CONSOLE_ANSI
 504 #define CONFIG_VIDEO_SW_CURSOR
 505 #define CONFIG_VGA_AS_SINGLE_DEVICE
 506 #define CONFIG_VIDEO_LOGO
 507 #define CONFIG_VIDEO_BMP_LOGO
 508 #endif
 509 #endif
 510
 511 /* I2C */
 512 #define CONFIG_SYS_I2C
 513 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 514 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 515 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 516 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 517 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 518 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 519 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 520 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 521 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 522 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 523 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 524 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 525 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 526
 527 /* I2C bus multiplexer */
 528 #define I2C_MUX_PCA_ADDR                0x70
 529 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 530 #define I2C_MUX_CH_DEFAULT      0x8
 531 #endif
 532
 533 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
 534 /* LDI/DVI Encoder for display */
 535 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 536 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 537
 538 /*
 539  * RTC configuration
 540  */
 541 #define RTC
 542 #define CONFIG_RTC_DS1337               1
 543 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 544
 545 /*DVI encoder*/
 546 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 547 #endif
 548
 549 /*
 550  * eSPI - Enhanced SPI
 551  */
 552 #define CONFIG_SPI_FLASH_BAR
 553 #define CONFIG_SF_DEFAULT_SPEED         10000000
 554 #define CONFIG_SF_DEFAULT_MODE          0
 555 #define CONFIG_ENV_SPI_BUS              0
 556 #define CONFIG_ENV_SPI_CS               0
 557 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 558 #define CONFIG_ENV_SPI_MODE             0
 559
 560 /*
 561  * General PCI
 562  * Memory space is mapped 1-1, but I/O space must start from 0.
 563  */
 564
 565 #ifdef CONFIG_PCI
 566 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 567 #ifdef CONFIG_PCIE1
 568 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 569 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 570 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 571 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 572 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 573 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 574 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 575 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 576 #endif
 577
 578 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 579 #ifdef CONFIG_PCIE2
 580 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 581 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 582 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 583 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 584 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 585 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 586 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 587 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 588 #endif
 589
 590 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 591 #ifdef CONFIG_PCIE3
 592 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 593 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 594 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 595 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 596 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 597 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 598 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 599 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 600 #endif
 601
 602 /* controller 4, Base address 203000 */
 603 #ifdef CONFIG_PCIE4
 604 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 605 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 606 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 607 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 608 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 609 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 610 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 611 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 612 #endif
 613
 614 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 615
 616 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 617 #define CONFIG_DOS_PARTITION
 618 #endif  /* CONFIG_PCI */
 619
 620 /* SATA */
 621 #define CONFIG_FSL_SATA_V2
 622 #ifdef CONFIG_FSL_SATA_V2
 623 #define CONFIG_LIBATA
 624 #define CONFIG_FSL_SATA
 625
 626 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 627 #define CONFIG_SATA1
 628 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 629 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 630
 631 #define CONFIG_LBA48
 632 #define CONFIG_CMD_SATA
 633 #define CONFIG_DOS_PARTITION
 634 #endif
 635
 636 /*
 637 * USB
 638 */
 639 #define CONFIG_HAS_FSL_DR_USB
 640
 641 #ifdef CONFIG_HAS_FSL_DR_USB
 642 #define CONFIG_USB_EHCI
 643
 644 #ifdef CONFIG_USB_EHCI
 645 #define CONFIG_USB_EHCI_FSL
 646 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 647 #endif
 648 #endif
 649
 650 #define CONFIG_MMC
 651
 652 #ifdef CONFIG_MMC
 653 #define CONFIG_FSL_ESDHC
 654 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 655 #define CONFIG_GENERIC_MMC
 656 #define CONFIG_DOS_PARTITION
 657 #endif
 658
 659 /* Qman/Bman */
 660 #ifndef CONFIG_NOBQFMAN
 661 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 662 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 663 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 664 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 665 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 666 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 667 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 668 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 669 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 670 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 671                                         CONFIG_SYS_BMAN_CENA_SIZE)
 672 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 673 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 674 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 675 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 676 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 677 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 678 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 679 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 680 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 681 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 682 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 683                                         CONFIG_SYS_QMAN_CENA_SIZE)
 684 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 685 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 686
 687 #define CONFIG_SYS_DPAA_FMAN
 688 #define CONFIG_SYS_DPAA_PME
 689
 690 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 691 #define CONFIG_QE
 692 #define CONFIG_U_QE
 693 #endif
 694
 695 /* Default address of microcode for the Linux Fman driver */
 696 #if defined(CONFIG_SPIFLASH)
 697 /*
 698  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 699  * env, so we got 0x110000.
 700  */
 701 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 702 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 703 #elif defined(CONFIG_SDCARD)
 704 /*
 705  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 706  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 707  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 708  */
 709 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 710 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 711 #elif defined(CONFIG_NAND)
 712 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 713 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 714 #else
 715 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 716 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 717 #endif
 718
 719 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 720 #if defined(CONFIG_SPIFLASH)
 721 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 722 #elif defined(CONFIG_SDCARD)
 723 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 724 #elif defined(CONFIG_NAND)
 725 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 726 #else
 727 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 728 #endif
 729 #endif
 730
 731 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 732 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 733 #endif /* CONFIG_NOBQFMAN */
 734
 735 #ifdef CONFIG_SYS_DPAA_FMAN
 736 #define CONFIG_FMAN_ENET
 737 #define CONFIG_PHY_VITESSE
 738 #define CONFIG_PHY_REALTEK
 739 #endif
 740
 741 #ifdef CONFIG_FMAN_ENET
 742 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 743 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 744 #elif defined(CONFIG_T1040D4RDB)
 745 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 746 #elif defined(CONFIG_T1042D4RDB)
 747 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 748 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 749 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 750 #endif
 751
 752 #ifdef CONFIG_T104XD4RDB
 753 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 754 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 755 #else
 756 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 757 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 758 #endif
 759
 760 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 761 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 762 #define CONFIG_VSC9953
 763 #define CONFIG_CMD_ETHSW
 764 #ifdef CONFIG_T1040RDB
 765 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 766 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 767 #else
 768 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 769 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 770 #endif
 771 #endif
 772
 773 #define CONFIG_MII              /* MII PHY management */
 774 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 775 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 776 #endif
 777
 778 /*
 779  * Environment
 780  */
 781 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 782 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 783
 784 /*
 785  * Command line configuration.
 786  */
 787 #ifdef CONFIG_T1042RDB_PI
 788 #define CONFIG_CMD_DATE
 789 #endif
 790 #define CONFIG_CMD_ERRATA
 791 #define CONFIG_CMD_IRQ
 792 #define CONFIG_CMD_REGINFO
 793
 794 #ifdef CONFIG_PCI
 795 #define CONFIG_CMD_PCI
 796 #endif
 797
 798 /* Hash command with SHA acceleration supported in hardware */
 799 #ifdef CONFIG_FSL_CAAM
 800 #define CONFIG_CMD_HASH
 801 #define CONFIG_SHA_HW_ACCEL
 802 #endif
 803
 804 /*
 805  * Miscellaneous configurable options
 806  */
 807 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 808 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 809 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 810 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 811 #ifdef CONFIG_CMD_KGDB
 812 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 813 #else
 814 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 815 #endif
 816 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 817 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 818 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 819
 820 /*
 821  * For booting Linux, the board info and command line data
 822  * have to be in the first 64 MB of memory, since this is
 823  * the maximum mapped by the Linux kernel during initialization.
 824  */
 825 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 826 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 827
 828 #ifdef CONFIG_CMD_KGDB
 829 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 830 #endif
 831
 832 /*
 833  * Dynamic MTD Partition support with mtdparts
 834  */
 835 #ifndef CONFIG_SYS_NO_FLASH
 836 #define CONFIG_MTD_DEVICE
 837 #define CONFIG_MTD_PARTITIONS
 838 #define CONFIG_CMD_MTDPARTS
 839 #define CONFIG_FLASH_CFI_MTD
 840 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 841                         "spi0=spife110000.0"
 842 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 843                                 "128k(dtb),96m(fs),-(user);"\
 844                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 845                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 846                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 847 #endif
 848
 849 /*
 850  * Environment Configuration
 851  */
 852 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 853 #define CONFIG_BOOTFILE         "uImage"
 854 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 855
 856 /* default location for tftp and bootm */
 857 #define CONFIG_LOADADDR         1000000
 858
 859
 860 #define CONFIG_BAUDRATE 115200
 861
 862 #define __USB_PHY_TYPE  utmi
 863 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 864
 865 #ifdef CONFIG_T1040RDB
 866 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 867 #elif defined(CONFIG_T1042RDB_PI)
 868 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 869 #elif defined(CONFIG_T1042RDB)
 870 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 871 #elif defined(CONFIG_T1040D4RDB)
 872 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 873 #elif defined(CONFIG_T1042D4RDB)
 874 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 875 #endif
 876
 877 #ifdef CONFIG_FSL_DIU_FB
 878 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 879 #else
 880 #define DIU_ENVIRONMENT
 881 #endif
 882
 883 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 884         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 885         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 886         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 887         "netdev=eth0\0"                                         \
 888         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 889         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 890         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 891         "tftpflash=tftpboot $loadaddr $uboot && "               \
 892         "protect off $ubootaddr +$filesize && "                 \
 893         "erase $ubootaddr +$filesize && "                       \
 894         "cp.b $loadaddr $ubootaddr $filesize && "               \
 895         "protect on $ubootaddr +$filesize && "                  \
 896         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 897         "consoledev=ttyS0\0"                                    \
 898         "ramdiskaddr=2000000\0"                                 \
 899         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 900         "fdtaddr=1e00000\0"                                     \
 901         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 902         "bdev=sda3\0"
 903
 904 #define CONFIG_LINUX                       \
 905         "setenv bootargs root=/dev/ram rw "            \
 906         "console=$consoledev,$baudrate $othbootargs;"  \
 907         "setenv ramdiskaddr 0x02000000;"               \
 908         "setenv fdtaddr 0x00c00000;"                   \
 909         "setenv loadaddr 0x1000000;"                   \
 910         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 911
 912 #define CONFIG_HDBOOT                                   \
 913         "setenv bootargs root=/dev/$bdev rw "           \
 914         "console=$consoledev,$baudrate $othbootargs;"   \
 915         "tftp $loadaddr $bootfile;"                     \
 916         "tftp $fdtaddr $fdtfile;"                       \
 917         "bootm $loadaddr - $fdtaddr"
 918
 919 #define CONFIG_NFSBOOTCOMMAND                   \
 920         "setenv bootargs root=/dev/nfs rw "     \
 921         "nfsroot=$serverip:$rootpath "          \
 922         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 923         "console=$consoledev,$baudrate $othbootargs;"   \
 924         "tftp $loadaddr $bootfile;"             \
 925         "tftp $fdtaddr $fdtfile;"               \
 926         "bootm $loadaddr - $fdtaddr"
 927
 928 #define CONFIG_RAMBOOTCOMMAND                           \
 929         "setenv bootargs root=/dev/ram rw "             \
 930         "console=$consoledev,$baudrate $othbootargs;"   \
 931         "tftp $ramdiskaddr $ramdiskfile;"               \
 932         "tftp $loadaddr $bootfile;"                     \
 933         "tftp $fdtaddr $fdtfile;"                       \
 934         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 935
 936 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 937
 938 #include <asm/fsl_secure_boot.h>
 939
 940 #endif  /* __CONFIG_H */