include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18
  19 #ifndef CONFIG_NXP_ESBC
  20 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  21 #else
  22 #define CONFIG_SYS_FSL_PBL_PBI \
  23                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  24 #endif
  25
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_PAD_TO               0x40000
  28 #define CONFIG_SPL_MAX_SIZE             0x28000
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SPL_SKIP_RELOCATE
  31 #define CONFIG_SPL_COMMON_INIT_DDR
  32 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  33 #undef CONFIG_DM_I2C
  34 #endif
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37
  38 #ifdef CONFIG_MTD_RAW_NAND
  39 #ifdef CONFIG_NXP_ESBC
  40 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  41 /*
  42  * HDR would be appended at end of image and copied to DDR along
  43  * with U-Boot image.
  44  */
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  46                                          CONFIG_U_BOOT_HDR_SIZE)
  47 #else
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #endif
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  53 #ifdef CONFIG_TARGET_T1040RDB
  54 #define CONFIG_SYS_FSL_PBL_RCW \
  55 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  56 #endif
  57 #ifdef CONFIG_TARGET_T1042RDB_PI
  58 #define CONFIG_SYS_FSL_PBL_RCW \
  59 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  60 #endif
  61 #ifdef CONFIG_TARGET_T1042RDB
  62 #define CONFIG_SYS_FSL_PBL_RCW \
  63 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  64 #endif
  65 #ifdef CONFIG_TARGET_T1040D4RDB
  66 #define CONFIG_SYS_FSL_PBL_RCW \
  67 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  68 #endif
  69 #ifdef CONFIG_TARGET_T1042D4RDB
  70 #define CONFIG_SYS_FSL_PBL_RCW \
  71 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  72 #endif
  73 #endif
  74
  75 #ifdef CONFIG_SPIFLASH
  76 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  77 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  82 #ifndef CONFIG_SPL_BUILD
  83 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  84 #endif
  85 #ifdef CONFIG_TARGET_T1040RDB
  86 #define CONFIG_SYS_FSL_PBL_RCW \
  87 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  88 #endif
  89 #ifdef CONFIG_TARGET_T1042RDB_PI
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1042RDB
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1040D4RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_TARGET_T1042D4RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 104 #endif
 105 #endif
 106
 107 #ifdef CONFIG_SDCARD
 108 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 109 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 110 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 111 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 112 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 113 #ifndef CONFIG_SPL_BUILD
 114 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 115 #endif
 116 #ifdef CONFIG_TARGET_T1040RDB
 117 #define CONFIG_SYS_FSL_PBL_RCW \
 118 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 119 #endif
 120 #ifdef CONFIG_TARGET_T1042RDB_PI
 121 #define CONFIG_SYS_FSL_PBL_RCW \
 122 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 123 #endif
 124 #ifdef CONFIG_TARGET_T1042RDB
 125 #define CONFIG_SYS_FSL_PBL_RCW \
 126 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 127 #endif
 128 #ifdef CONFIG_TARGET_T1040D4RDB
 129 #define CONFIG_SYS_FSL_PBL_RCW \
 130 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 131 #endif
 132 #ifdef CONFIG_TARGET_T1042D4RDB
 133 #define CONFIG_SYS_FSL_PBL_RCW \
 134 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 135 #endif
 136 #endif
 137
 138 #endif
 139
 140 /* High Level Configuration Options */
 141 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 142
 143 /* support deep sleep */
 144 #define CONFIG_DEEP_SLEEP
 145
 146 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 147 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 148 #endif
 149
 150 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 151 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 152 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 153 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 154 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 155 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 156
 157 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 158
 159 #define CONFIG_ENV_OVERWRITE
 160
 161 #if defined(CONFIG_SPIFLASH)
 162 #elif defined(CONFIG_SDCARD)
 163 #define CONFIG_SYS_MMC_ENV_DEV          0
 164 #elif defined(CONFIG_MTD_RAW_NAND)
 165 #ifdef CONFIG_NXP_ESBC
 166 #define CONFIG_RAMBOOT_NAND
 167 #define CONFIG_BOOTSCRIPT_COPY_RAM
 168 #endif
 169 #endif
 170
 171 #define CONFIG_SYS_CLK_FREQ     100000000
 172 #define CONFIG_DDR_CLK_FREQ     66666666
 173
 174 /*
 175  * These can be toggled for performance analysis, otherwise use default.
 176  */
 177 #define CONFIG_SYS_CACHE_STASHING
 178 #define CONFIG_BACKSIDE_L2_CACHE
 179 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 180 #define CONFIG_BTB                      /* toggle branch predition */
 181 #define CONFIG_DDR_ECC
 182 #ifdef CONFIG_DDR_ECC
 183 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 184 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 185 #endif
 186
 187 #define CONFIG_ENABLE_36BIT_PHYS
 188
 189 /*
 190  *  Config the L3 Cache as L3 SRAM
 191  */
 192 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 193 /*
 194  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 195  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 196  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 197  */
 198 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 199 #define CONFIG_SYS_L3_SIZE              256 << 10
 200 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 201 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 202 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 203 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 204 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 205
 206 #define CONFIG_SYS_DCSRBAR              0xf0000000
 207 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 208
 209 /*
 210  * DDR Setup
 211  */
 212 #define CONFIG_VERY_BIG_RAM
 213 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 214 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 215
 216 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 217 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 218
 219 #define CONFIG_DDR_SPD
 220
 221 #define CONFIG_SYS_SPD_BUS_NUM  0
 222 #define SPD_EEPROM_ADDRESS      0x51
 223
 224 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 225
 226 /*
 227  * IFC Definitions
 228  */
 229 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 230 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 231
 232 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 233 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 234                                 CSPR_PORT_SIZE_16 | \
 235                                 CSPR_MSEL_NOR | \
 236                                 CSPR_V)
 237 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 238
 239 /*
 240  * TDM Definition
 241  */
 242 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 243
 244 /* NOR Flash Timing Params */
 245 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 246 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 247                                 FTIM0_NOR_TEADC(0x5) | \
 248                                 FTIM0_NOR_TEAHC(0x5))
 249 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 250                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 251                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 252 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 253                                 FTIM2_NOR_TCH(0x4) | \
 254                                 FTIM2_NOR_TWPH(0x0E) | \
 255                                 FTIM2_NOR_TWP(0x1c))
 256 #define CONFIG_SYS_NOR_FTIM3    0x0
 257
 258 #define CONFIG_SYS_FLASH_QUIET_TEST
 259 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 260
 261 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 262 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 263 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 264 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 265
 266 #define CONFIG_SYS_FLASH_EMPTY_INFO
 267 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 268
 269 /* CPLD on IFC */
 270 #define CPLD_LBMAP_MASK                 0x3F
 271 #define CPLD_BANK_SEL_MASK              0x07
 272 #define CPLD_BANK_OVERRIDE              0x40
 273 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 274 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 275 #define CPLD_LBMAP_RESET                0xFF
 276 #define CPLD_LBMAP_SHIFT                0x03
 277
 278 #if defined(CONFIG_TARGET_T1042RDB_PI)
 279 #define CPLD_DIU_SEL_DFP                0x80
 280 #elif defined(CONFIG_TARGET_T1042D4RDB)
 281 #define CPLD_DIU_SEL_DFP                0xc0
 282 #endif
 283
 284 #if defined(CONFIG_TARGET_T1040D4RDB)
 285 #define CPLD_INT_MASK_ALL               0xFF
 286 #define CPLD_INT_MASK_THERM             0x80
 287 #define CPLD_INT_MASK_DVI_DFP           0x40
 288 #define CPLD_INT_MASK_QSGMII1           0x20
 289 #define CPLD_INT_MASK_QSGMII2           0x10
 290 #define CPLD_INT_MASK_SGMI1             0x08
 291 #define CPLD_INT_MASK_SGMI2             0x04
 292 #define CPLD_INT_MASK_TDMR1             0x02
 293 #define CPLD_INT_MASK_TDMR2             0x01
 294 #endif
 295
 296 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 297 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 298 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 299 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 300                                 | CSPR_PORT_SIZE_8 \
 301                                 | CSPR_MSEL_GPCM \
 302                                 | CSPR_V)
 303 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 304 #define CONFIG_SYS_CSOR2        0x0
 305 /* CPLD Timing parameters for IFC CS2 */
 306 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 307                                         FTIM0_GPCM_TEADC(0x0e) | \
 308                                         FTIM0_GPCM_TEAHC(0x0e))
 309 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 310                                         FTIM1_GPCM_TRAD(0x1f))
 311 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 312                                         FTIM2_GPCM_TCH(0x8) | \
 313                                         FTIM2_GPCM_TWP(0x1f))
 314 #define CONFIG_SYS_CS2_FTIM3            0x0
 315
 316 /* NAND Flash on IFC */
 317 #define CONFIG_NAND_FSL_IFC
 318 #define CONFIG_SYS_NAND_BASE            0xff800000
 319 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 320
 321 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 322 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 323                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 324                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 325                                 | CSPR_V)
 326 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 327
 328 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 329                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 330                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 331                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 332                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 333                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 334                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 335
 336 #define CONFIG_SYS_NAND_ONFI_DETECTION
 337
 338 /* ONFI NAND Flash mode0 Timing Params */
 339 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 340                                         FTIM0_NAND_TWP(0x18)   | \
 341                                         FTIM0_NAND_TWCHT(0x07) | \
 342                                         FTIM0_NAND_TWH(0x0a))
 343 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 344                                         FTIM1_NAND_TWBE(0x39)  | \
 345                                         FTIM1_NAND_TRR(0x0e)   | \
 346                                         FTIM1_NAND_TRP(0x18))
 347 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 348                                         FTIM2_NAND_TREH(0x0a) | \
 349                                         FTIM2_NAND_TWHRE(0x1e))
 350 #define CONFIG_SYS_NAND_FTIM3           0x0
 351
 352 #define CONFIG_SYS_NAND_DDR_LAW         11
 353 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 354 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 355
 356 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 357
 358 #if defined(CONFIG_MTD_RAW_NAND)
 359 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 360 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 361 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 362 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 363 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 364 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 365 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 366 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 367 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 368 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 369 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 370 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 371 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 372 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 373 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 374 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 375 #else
 376 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 377 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 378 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 384 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 385 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 386 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 387 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 388 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 389 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 390 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 391 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 392 #endif
 393
 394 #ifdef CONFIG_SPL_BUILD
 395 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 396 #else
 397 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 398 #endif
 399
 400 #if defined(CONFIG_RAMBOOT_PBL)
 401 #define CONFIG_SYS_RAMBOOT
 402 #endif
 403
 404 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 405 #if defined(CONFIG_MTD_RAW_NAND)
 406 #define CONFIG_A008044_WORKAROUND
 407 #endif
 408 #endif
 409
 410 #define CONFIG_HWCONFIG
 411
 412 /* define to use L1 as initial stack */
 413 #define CONFIG_L1_INIT_RAM
 414 #define CONFIG_SYS_INIT_RAM_LOCK
 415 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 416 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 417 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 418 /* The assembler doesn't like typecast */
 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 420         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 421           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 422 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 423
 424 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 425                                         GENERATED_GBL_DATA_SIZE)
 426 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 427
 428 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 429 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 430
 431 /* Serial Port - controlled on board with jumper J8
 432  * open - index 2
 433  * shorted - index 1
 434  */
 435 #define CONFIG_SYS_NS16550_SERIAL
 436 #define CONFIG_SYS_NS16550_REG_SIZE     1
 437 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 438
 439 #define CONFIG_SYS_BAUDRATE_TABLE       \
 440         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 441
 442 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 443 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 444 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 445 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 446
 447 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 448 /* Video */
 449 #define CONFIG_FSL_DIU_FB
 450
 451 #ifdef CONFIG_FSL_DIU_FB
 452 #define CONFIG_FSL_DIU_CH7301
 453 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 454 #define CONFIG_VIDEO_LOGO
 455 #define CONFIG_VIDEO_BMP_LOGO
 456 #endif
 457 #endif
 458
 459 /* I2C */
 460 #ifndef CONFIG_DM_I2C
 461 #define CONFIG_SYS_I2C
 462 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 463 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 464 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 465 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 466 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 467 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 468 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 469 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 470 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 471 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 472 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 473 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 474 #else
 475 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 476 #define CONFIG_I2C_DEFAULT_BUS_NUMBER   0
 477 #endif
 478
 479 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 480 /* I2C bus multiplexer */
 481 #define I2C_MUX_PCA_ADDR                0x70
 482 #define I2C_MUX_CH_DEFAULT      0x8
 483
 484 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 485         defined(CONFIG_TARGET_T1040D4RDB)       || \
 486         defined(CONFIG_TARGET_T1042D4RDB)
 487 /* LDI/DVI Encoder for display */
 488 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 489 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 490 #define CONFIG_SYS_I2C_DVI_BUS_NUM      0
 491
 492 /*
 493  * RTC configuration
 494  */
 495 #define RTC
 496 #define CONFIG_RTC_DS1337               1
 497 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 498
 499 /*DVI encoder*/
 500 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 501 #endif
 502
 503 /*
 504  * eSPI - Enhanced SPI
 505  */
 506
 507 /*
 508  * General PCI
 509  * Memory space is mapped 1-1, but I/O space must start from 0.
 510  */
 511
 512 #ifdef CONFIG_PCI
 513 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 514 #ifdef CONFIG_PCIE1
 515 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 516 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 517 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 518 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 519 #endif
 520
 521 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 522 #ifdef CONFIG_PCIE2
 523 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 524 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 525 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 526 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 527 #endif
 528
 529 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 530 #ifdef CONFIG_PCIE3
 531 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 532 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 533 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 534 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 535 #endif
 536
 537 /* controller 4, Base address 203000 */
 538 #ifdef CONFIG_PCIE4
 539 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 540 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 541 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 542 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 543 #endif
 544
 545 #if !defined(CONFIG_DM_PCI)
 546 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 547 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 548 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 549 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 550 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 551 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 552 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 553 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 554 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 555 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 556 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 557 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 558 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 559 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 560 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 561 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 562 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 563 #define CONFIG_PCI_INDIRECT_BRIDGE
 564 #endif
 565 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 566 #endif  /* CONFIG_PCI */
 567
 568 /* SATA */
 569 #define CONFIG_FSL_SATA_V2
 570 #ifdef CONFIG_FSL_SATA_V2
 571 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 572 #define CONFIG_SATA1
 573 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 574 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 575
 576 #define CONFIG_LBA48
 577 #endif
 578
 579 /*
 580 * USB
 581 */
 582 #define CONFIG_HAS_FSL_DR_USB
 583
 584 #ifdef CONFIG_HAS_FSL_DR_USB
 585 #ifdef CONFIG_USB_EHCI_HCD
 586 #define CONFIG_USB_EHCI_FSL
 587 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 588 #endif
 589 #endif
 590
 591 #ifdef CONFIG_MMC
 592 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 593 #endif
 594
 595 /* Qman/Bman */
 596 #ifndef CONFIG_NOBQFMAN
 597 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 598 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 599 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 600 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 601 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 602 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 603 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 604 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 605 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 606                                         CONFIG_SYS_BMAN_CENA_SIZE)
 607 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 608 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 609 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 610 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 611 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 612 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 613 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 614 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 615 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 616 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 617 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 618                                         CONFIG_SYS_QMAN_CENA_SIZE)
 619 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 620 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 621
 622 #define CONFIG_SYS_DPAA_FMAN
 623 #define CONFIG_SYS_DPAA_PME
 624
 625 #define CONFIG_U_QE
 626
 627 /* Default address of microcode for the Linux Fman driver */
 628 #if defined(CONFIG_SPIFLASH)
 629 /*
 630  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 631  * env, so we got 0x110000.
 632  */
 633 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 634 #elif defined(CONFIG_SDCARD)
 635 /*
 636  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 637  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 638  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 639  */
 640 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 641 #elif defined(CONFIG_MTD_RAW_NAND)
 642 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 643 #else
 644 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 645 #endif
 646
 647 #if defined(CONFIG_SPIFLASH)
 648 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 649 #elif defined(CONFIG_SDCARD)
 650 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 651 #elif defined(CONFIG_MTD_RAW_NAND)
 652 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 653 #else
 654 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 655 #endif
 656
 657 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 658 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 659 #endif /* CONFIG_NOBQFMAN */
 660
 661 #ifdef CONFIG_FMAN_ENET
 662 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 663 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 664 #elif defined(CONFIG_TARGET_T1040D4RDB)
 665 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 666 #elif defined(CONFIG_TARGET_T1042D4RDB)
 667 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 668 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 669 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 670 #endif
 671
 672 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 673 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 674 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 675 #else
 676 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 677 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 678 #endif
 679
 680 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 681 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 682 #define CONFIG_VSC9953
 683 #ifdef CONFIG_TARGET_T1040RDB
 684 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 685 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 686 #else
 687 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 688 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 689 #endif
 690 #endif
 691
 692 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 693 #endif
 694
 695 /*
 696  * Environment
 697  */
 698 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 699 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 700
 701 /*
 702  * Miscellaneous configurable options
 703  */
 704 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 705
 706 /*
 707  * For booting Linux, the board info and command line data
 708  * have to be in the first 64 MB of memory, since this is
 709  * the maximum mapped by the Linux kernel during initialization.
 710  */
 711 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 712 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 713
 714 #ifdef CONFIG_CMD_KGDB
 715 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 716 #endif
 717
 718 /*
 719  * Dynamic MTD Partition support with mtdparts
 720  */
 721
 722 /*
 723  * Environment Configuration
 724  */
 725 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 726 #define CONFIG_BOOTFILE         "uImage"
 727 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 728
 729 /* default location for tftp and bootm */
 730 #define CONFIG_LOADADDR         1000000
 731
 732 #define __USB_PHY_TYPE  utmi
 733 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 734
 735 #ifdef CONFIG_TARGET_T1040RDB
 736 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 737 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 738 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 739 #elif defined(CONFIG_TARGET_T1042RDB)
 740 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 741 #elif defined(CONFIG_TARGET_T1040D4RDB)
 742 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 743 #elif defined(CONFIG_TARGET_T1042D4RDB)
 744 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 745 #endif
 746
 747 #ifdef CONFIG_FSL_DIU_FB
 748 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 749 #else
 750 #define DIU_ENVIRONMENT
 751 #endif
 752
 753 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 754         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 755         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 756         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 757         "netdev=eth0\0"                                         \
 758         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 759         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 760         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 761         "tftpflash=tftpboot $loadaddr $uboot && "               \
 762         "protect off $ubootaddr +$filesize && "                 \
 763         "erase $ubootaddr +$filesize && "                       \
 764         "cp.b $loadaddr $ubootaddr $filesize && "               \
 765         "protect on $ubootaddr +$filesize && "                  \
 766         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 767         "consoledev=ttyS0\0"                                    \
 768         "ramdiskaddr=2000000\0"                                 \
 769         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 770         "fdtaddr=1e00000\0"                                     \
 771         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 772         "bdev=sda3\0"
 773
 774 #define CONFIG_LINUX                       \
 775         "setenv bootargs root=/dev/ram rw "            \
 776         "console=$consoledev,$baudrate $othbootargs;"  \
 777         "setenv ramdiskaddr 0x02000000;"               \
 778         "setenv fdtaddr 0x00c00000;"                   \
 779         "setenv loadaddr 0x1000000;"                   \
 780         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 781
 782 #define CONFIG_HDBOOT                                   \
 783         "setenv bootargs root=/dev/$bdev rw "           \
 784         "console=$consoledev,$baudrate $othbootargs;"   \
 785         "tftp $loadaddr $bootfile;"                     \
 786         "tftp $fdtaddr $fdtfile;"                       \
 787         "bootm $loadaddr - $fdtaddr"
 788
 789 #define CONFIG_NFSBOOTCOMMAND                   \
 790         "setenv bootargs root=/dev/nfs rw "     \
 791         "nfsroot=$serverip:$rootpath "          \
 792         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 793         "console=$consoledev,$baudrate $othbootargs;"   \
 794         "tftp $loadaddr $bootfile;"             \
 795         "tftp $fdtaddr $fdtfile;"               \
 796         "bootm $loadaddr - $fdtaddr"
 797
 798 #define CONFIG_RAMBOOTCOMMAND                           \
 799         "setenv bootargs root=/dev/ram rw "             \
 800         "console=$consoledev,$baudrate $othbootargs;"   \
 801         "tftp $ramdiskaddr $ramdiskfile;"               \
 802         "tftp $loadaddr $bootfile;"                     \
 803         "tftp $fdtaddr $fdtfile;"                       \
 804         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 805
 806 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 807
 808 #include <asm/fsl_secure_boot.h>
 809
 810 #endif  /* __CONFIG_H */