include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_SPL_FLUSH_IMAGE
  19 #define CONFIG_SPL_PAD_TO               0x40000
  20 #define CONFIG_SPL_MAX_SIZE             0x28000
  21 #ifdef CONFIG_SPL_BUILD
  22 #define CONFIG_SPL_SKIP_RELOCATE
  23 #define CONFIG_SPL_COMMON_INIT_DDR
  24 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  25 #endif
  26 #define RESET_VECTOR_OFFSET             0x27FFC
  27 #define BOOT_PAGE_OFFSET                0x27000
  28
  29 #ifdef CONFIG_MTD_RAW_NAND
  30 #ifdef CONFIG_NXP_ESBC
  31 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  32 /*
  33  * HDR would be appended at end of image and copied to DDR along
  34  * with U-Boot image.
  35  */
  36 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  37                                          CONFIG_U_BOOT_HDR_SIZE)
  38 #else
  39 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  40 #endif
  41 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  42 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  43 #endif
  44
  45 #ifdef CONFIG_SPIFLASH
  46 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  47 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  48 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  49 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  50 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  51 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  52 #ifndef CONFIG_SPL_BUILD
  53 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  54 #endif
  55 #endif
  56
  57 #ifdef CONFIG_SDCARD
  58 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  59 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  60 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  61 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  62 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  63 #ifndef CONFIG_SPL_BUILD
  64 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  65 #endif
  66 #endif
  67
  68 #endif
  69
  70 /* High Level Configuration Options */
  71 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  72
  73 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  74 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  75 #endif
  76
  77 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  78 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  79 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  80 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  81 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  82 #define CONFIG_PCIE4                    /* PCIE controller 4 */
  83
  84 #if defined(CONFIG_SPIFLASH)
  85 #elif defined(CONFIG_MTD_RAW_NAND)
  86 #ifdef CONFIG_NXP_ESBC
  87 #define CONFIG_RAMBOOT_NAND
  88 #define CONFIG_BOOTSCRIPT_COPY_RAM
  89 #endif
  90 #endif
  91
  92 /*
  93  * These can be toggled for performance analysis, otherwise use default.
  94  */
  95 #define CONFIG_SYS_CACHE_STASHING
  96 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  97 #ifdef CONFIG_DDR_ECC
  98 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  99 #endif
 100
 101 #define CONFIG_ENABLE_36BIT_PHYS
 102
 103 /*
 104  *  Config the L3 Cache as L3 SRAM
 105  */
 106 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 107 /*
 108  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 109  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 110  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 111  */
 112 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 113 #define CONFIG_SYS_L3_SIZE              256 << 10
 114 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 115 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 116 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 117 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 118 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 119
 120 #define CONFIG_SYS_DCSRBAR              0xf0000000
 121 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 122
 123 /*
 124  * DDR Setup
 125  */
 126 #define CONFIG_VERY_BIG_RAM
 127 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 128 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 129
 130 #define CONFIG_SYS_SPD_BUS_NUM  0
 131 #define SPD_EEPROM_ADDRESS      0x51
 132
 133 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 134
 135 /*
 136  * IFC Definitions
 137  */
 138 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 139 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 140
 141 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 142 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 143                                 CSPR_PORT_SIZE_16 | \
 144                                 CSPR_MSEL_NOR | \
 145                                 CSPR_V)
 146 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 147
 148 /*
 149  * TDM Definition
 150  */
 151 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 152
 153 /* NOR Flash Timing Params */
 154 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 155 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 156                                 FTIM0_NOR_TEADC(0x5) | \
 157                                 FTIM0_NOR_TEAHC(0x5))
 158 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 159                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 160                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 161 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 162                                 FTIM2_NOR_TCH(0x4) | \
 163                                 FTIM2_NOR_TWPH(0x0E) | \
 164                                 FTIM2_NOR_TWP(0x1c))
 165 #define CONFIG_SYS_NOR_FTIM3    0x0
 166
 167 #define CONFIG_SYS_FLASH_QUIET_TEST
 168 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 169
 170 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 171 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 172 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 173
 174 #define CONFIG_SYS_FLASH_EMPTY_INFO
 175 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 176
 177 /* CPLD on IFC */
 178 #define CPLD_LBMAP_MASK                 0x3F
 179 #define CPLD_BANK_SEL_MASK              0x07
 180 #define CPLD_BANK_OVERRIDE              0x40
 181 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 182 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 183 #define CPLD_LBMAP_RESET                0xFF
 184 #define CPLD_LBMAP_SHIFT                0x03
 185
 186 #if defined(CONFIG_TARGET_T1042RDB_PI)
 187 #define CPLD_DIU_SEL_DFP                0x80
 188 #elif defined(CONFIG_TARGET_T1042D4RDB)
 189 #define CPLD_DIU_SEL_DFP                0xc0
 190 #endif
 191
 192 #if defined(CONFIG_TARGET_T1040D4RDB)
 193 #define CPLD_INT_MASK_ALL               0xFF
 194 #define CPLD_INT_MASK_THERM             0x80
 195 #define CPLD_INT_MASK_DVI_DFP           0x40
 196 #define CPLD_INT_MASK_QSGMII1           0x20
 197 #define CPLD_INT_MASK_QSGMII2           0x10
 198 #define CPLD_INT_MASK_SGMI1             0x08
 199 #define CPLD_INT_MASK_SGMI2             0x04
 200 #define CPLD_INT_MASK_TDMR1             0x02
 201 #define CPLD_INT_MASK_TDMR2             0x01
 202 #endif
 203
 204 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 205 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 206 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 207 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 208                                 | CSPR_PORT_SIZE_8 \
 209                                 | CSPR_MSEL_GPCM \
 210                                 | CSPR_V)
 211 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 212 #define CONFIG_SYS_CSOR2        0x0
 213 /* CPLD Timing parameters for IFC CS2 */
 214 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 215                                         FTIM0_GPCM_TEADC(0x0e) | \
 216                                         FTIM0_GPCM_TEAHC(0x0e))
 217 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 218                                         FTIM1_GPCM_TRAD(0x1f))
 219 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 220                                         FTIM2_GPCM_TCH(0x8) | \
 221                                         FTIM2_GPCM_TWP(0x1f))
 222 #define CONFIG_SYS_CS2_FTIM3            0x0
 223
 224 /* NAND Flash on IFC */
 225 #define CONFIG_SYS_NAND_BASE            0xff800000
 226 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 227
 228 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 229 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 230                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 231                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 232                                 | CSPR_V)
 233 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 234
 235 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 236                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 237                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 238                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 239                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 240                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 241                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 242
 243 /* ONFI NAND Flash mode0 Timing Params */
 244 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 245                                         FTIM0_NAND_TWP(0x18)   | \
 246                                         FTIM0_NAND_TWCHT(0x07) | \
 247                                         FTIM0_NAND_TWH(0x0a))
 248 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 249                                         FTIM1_NAND_TWBE(0x39)  | \
 250                                         FTIM1_NAND_TRR(0x0e)   | \
 251                                         FTIM1_NAND_TRP(0x18))
 252 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 253                                         FTIM2_NAND_TREH(0x0a) | \
 254                                         FTIM2_NAND_TWHRE(0x1e))
 255 #define CONFIG_SYS_NAND_FTIM3           0x0
 256
 257 #define CONFIG_SYS_NAND_DDR_LAW         11
 258 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 259 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 260
 261 #if defined(CONFIG_MTD_RAW_NAND)
 262 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 263 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 264 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 265 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 266 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 267 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 268 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 269 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 270 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 271 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 272 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 273 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 274 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 275 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 276 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 277 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 278 #else
 279 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 280 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 281 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 282 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 283 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 284 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 285 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 286 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 287 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 288 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 289 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 290 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 291 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 292 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 293 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 294 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 295 #endif
 296
 297 #if defined(CONFIG_RAMBOOT_PBL)
 298 #define CONFIG_SYS_RAMBOOT
 299 #endif
 300
 301 #define CONFIG_HWCONFIG
 302
 303 /* define to use L1 as initial stack */
 304 #define CONFIG_L1_INIT_RAM
 305 #define CONFIG_SYS_INIT_RAM_LOCK
 306 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 307 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 309 /* The assembler doesn't like typecast */
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 311         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 312           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 313 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 314
 315 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 316                                         GENERATED_GBL_DATA_SIZE)
 317 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 318
 319 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 320
 321 /* Serial Port - controlled on board with jumper J8
 322  * open - index 2
 323  * shorted - index 1
 324  */
 325 #define CONFIG_SYS_NS16550_SERIAL
 326 #define CONFIG_SYS_NS16550_REG_SIZE     1
 327 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 328
 329 #define CONFIG_SYS_BAUDRATE_TABLE       \
 330         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 331
 332 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 333 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 334 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 335 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 336
 337 /* I2C bus multiplexer */
 338 #define I2C_MUX_PCA_ADDR                0x70
 339 #define I2C_MUX_CH_DEFAULT      0x8
 340
 341 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 342         defined(CONFIG_TARGET_T1040D4RDB)       || \
 343         defined(CONFIG_TARGET_T1042D4RDB)
 344 /* LDI/DVI Encoder for display */
 345 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 346 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 347 #define CONFIG_SYS_I2C_DVI_BUS_NUM      0
 348
 349 /*
 350  * RTC configuration
 351  */
 352 #define RTC
 353 #define CONFIG_RTC_DS1337               1
 354 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 355
 356 /*DVI encoder*/
 357 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 358 #endif
 359
 360 /*
 361  * eSPI - Enhanced SPI
 362  */
 363
 364 /*
 365  * General PCI
 366  * Memory space is mapped 1-1, but I/O space must start from 0.
 367  */
 368
 369 #ifdef CONFIG_PCI
 370 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 371 #ifdef CONFIG_PCIE1
 372 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 373 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 374 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 375 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 376 #endif
 377
 378 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 379 #ifdef CONFIG_PCIE2
 380 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 381 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 382 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 383 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 384 #endif
 385
 386 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 387 #ifdef CONFIG_PCIE3
 388 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 389 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 390 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 391 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 392 #endif
 393
 394 /* controller 4, Base address 203000 */
 395 #ifdef CONFIG_PCIE4
 396 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 397 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 398 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 399 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 400 #endif
 401
 402 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 403 #endif  /* CONFIG_PCI */
 404
 405 /* SATA */
 406 #define CONFIG_FSL_SATA_V2
 407 #ifdef CONFIG_FSL_SATA_V2
 408 #define CONFIG_SATA1
 409 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 410 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 411
 412 #define CONFIG_LBA48
 413 #endif
 414
 415 /*
 416 * USB
 417 */
 418 #define CONFIG_HAS_FSL_DR_USB
 419
 420 #ifdef CONFIG_HAS_FSL_DR_USB
 421 #ifdef CONFIG_USB_EHCI_HCD
 422 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 423 #endif
 424 #endif
 425
 426 #ifdef CONFIG_MMC
 427 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 428 #endif
 429
 430 /* Qman/Bman */
 431 #ifndef CONFIG_NOBQFMAN
 432 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 433 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 434 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 435 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 436 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 437 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 438 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 439 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 440 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 441                                         CONFIG_SYS_BMAN_CENA_SIZE)
 442 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 443 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 444 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 445 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 446 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 447 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 448 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 449 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 450 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 451 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 452 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 453                                         CONFIG_SYS_QMAN_CENA_SIZE)
 454 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 455 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 456
 457 #define CONFIG_SYS_DPAA_FMAN
 458 #define CONFIG_SYS_DPAA_PME
 459
 460 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 461 #endif /* CONFIG_NOBQFMAN */
 462
 463 #ifdef CONFIG_FMAN_ENET
 464 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 465 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 466 #elif defined(CONFIG_TARGET_T1040D4RDB)
 467 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 468 #elif defined(CONFIG_TARGET_T1042D4RDB)
 469 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 470 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 471 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 472 #endif
 473
 474 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 475 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 476 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 477 #else
 478 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 479 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 480 #endif
 481
 482 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 483 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 484 #define CONFIG_VSC9953
 485 #ifdef CONFIG_TARGET_T1040RDB
 486 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 487 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 488 #else
 489 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 490 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 491 #endif
 492 #endif
 493 #endif
 494
 495 /*
 496  * Environment
 497  */
 498 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 499 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 500
 501 /*
 502  * Miscellaneous configurable options
 503  */
 504
 505 /*
 506  * For booting Linux, the board info and command line data
 507  * have to be in the first 64 MB of memory, since this is
 508  * the maximum mapped by the Linux kernel during initialization.
 509  */
 510 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 511 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 512
 513 /*
 514  * Dynamic MTD Partition support with mtdparts
 515  */
 516
 517 /*
 518  * Environment Configuration
 519  */
 520 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 521 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 522
 523 #define __USB_PHY_TYPE  utmi
 524 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 525
 526 #ifdef CONFIG_TARGET_T1040RDB
 527 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 528 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 529 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 530 #elif defined(CONFIG_TARGET_T1042RDB)
 531 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 532 #elif defined(CONFIG_TARGET_T1040D4RDB)
 533 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 534 #elif defined(CONFIG_TARGET_T1042D4RDB)
 535 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 536 #endif
 537
 538 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 539         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 540         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 541         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 542         "netdev=eth0\0"                                         \
 543         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 544         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 545         "tftpflash=tftpboot $loadaddr $uboot && "               \
 546         "protect off $ubootaddr +$filesize && "                 \
 547         "erase $ubootaddr +$filesize && "                       \
 548         "cp.b $loadaddr $ubootaddr $filesize && "               \
 549         "protect on $ubootaddr +$filesize && "                  \
 550         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 551         "consoledev=ttyS0\0"                                    \
 552         "ramdiskaddr=2000000\0"                                 \
 553         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 554         "fdtaddr=1e00000\0"                                     \
 555         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 556         "bdev=sda3\0"
 557
 558 #include <asm/fsl_secure_boot.h>
 559
 560 #endif  /* __CONFIG_H */