include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /*
  10  * T104x RDB board configuration file
  11  */
  12 #include <asm/config_mpc85xx.h>
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15
  16 #ifndef CONFIG_NXP_ESBC
  17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  18 #else
  19 #define CONFIG_SYS_FSL_PBL_PBI \
  20                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  21 #endif
  22
  23 #define CONFIG_SPL_FLUSH_IMAGE
  24 #define CONFIG_SPL_PAD_TO               0x40000
  25 #define CONFIG_SPL_MAX_SIZE             0x28000
  26 #ifdef CONFIG_SPL_BUILD
  27 #define CONFIG_SPL_SKIP_RELOCATE
  28 #define CONFIG_SPL_COMMON_INIT_DDR
  29 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  30 #endif
  31 #define RESET_VECTOR_OFFSET             0x27FFC
  32 #define BOOT_PAGE_OFFSET                0x27000
  33
  34 #ifdef CONFIG_NAND
  35 #ifdef CONFIG_NXP_ESBC
  36 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  37 /*
  38  * HDR would be appended at end of image and copied to DDR along
  39  * with U-Boot image.
  40  */
  41 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  42                                          CONFIG_U_BOOT_HDR_SIZE)
  43 #else
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  45 #endif
  46 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  47 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  48 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  49 #ifdef CONFIG_TARGET_T1040RDB
  50 #define CONFIG_SYS_FSL_PBL_RCW \
  51 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  52 #endif
  53 #ifdef CONFIG_TARGET_T1042RDB_PI
  54 #define CONFIG_SYS_FSL_PBL_RCW \
  55 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  56 #endif
  57 #ifdef CONFIG_TARGET_T1042RDB
  58 #define CONFIG_SYS_FSL_PBL_RCW \
  59 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  60 #endif
  61 #ifdef CONFIG_TARGET_T1040D4RDB
  62 #define CONFIG_SYS_FSL_PBL_RCW \
  63 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  64 #endif
  65 #ifdef CONFIG_TARGET_T1042D4RDB
  66 #define CONFIG_SYS_FSL_PBL_RCW \
  67 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  68 #endif
  69 #endif
  70
  71 #ifdef CONFIG_SPIFLASH
  72 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  73 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  74 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  75 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  78 #ifndef CONFIG_SPL_BUILD
  79 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  80 #endif
  81 #ifdef CONFIG_TARGET_T1040RDB
  82 #define CONFIG_SYS_FSL_PBL_RCW \
  83 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  84 #endif
  85 #ifdef CONFIG_TARGET_T1042RDB_PI
  86 #define CONFIG_SYS_FSL_PBL_RCW \
  87 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  88 #endif
  89 #ifdef CONFIG_TARGET_T1042RDB
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1040D4RDB
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1042D4RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 100 #endif
 101 #endif
 102
 103 #ifdef CONFIG_SDCARD
 104 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 105 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 106 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 107 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 108 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 109 #ifndef CONFIG_SPL_BUILD
 110 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 111 #endif
 112 #ifdef CONFIG_TARGET_T1040RDB
 113 #define CONFIG_SYS_FSL_PBL_RCW \
 114 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 115 #endif
 116 #ifdef CONFIG_TARGET_T1042RDB_PI
 117 #define CONFIG_SYS_FSL_PBL_RCW \
 118 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 119 #endif
 120 #ifdef CONFIG_TARGET_T1042RDB
 121 #define CONFIG_SYS_FSL_PBL_RCW \
 122 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 123 #endif
 124 #ifdef CONFIG_TARGET_T1040D4RDB
 125 #define CONFIG_SYS_FSL_PBL_RCW \
 126 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 127 #endif
 128 #ifdef CONFIG_TARGET_T1042D4RDB
 129 #define CONFIG_SYS_FSL_PBL_RCW \
 130 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 131 #endif
 132 #endif
 133
 134 #endif
 135
 136 /* High Level Configuration Options */
 137 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 138
 139 /* support deep sleep */
 140 #define CONFIG_DEEP_SLEEP
 141
 142 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 143 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 144 #endif
 145
 146 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 147 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 148 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 149 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 150 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 151 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 152
 153 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 154
 155 #define CONFIG_ENV_OVERWRITE
 156
 157 #if defined(CONFIG_SPIFLASH)
 158 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 159 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 160 #define CONFIG_ENV_SECT_SIZE            0x10000
 161 #elif defined(CONFIG_SDCARD)
 162 #define CONFIG_SYS_MMC_ENV_DEV          0
 163 #define CONFIG_ENV_SIZE                 0x2000
 164 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 165 #elif defined(CONFIG_NAND)
 166 #ifdef CONFIG_NXP_ESBC
 167 #define CONFIG_RAMBOOT_NAND
 168 #define CONFIG_BOOTSCRIPT_COPY_RAM
 169 #endif
 170 #define CONFIG_ENV_SIZE                 0x2000
 171 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 172 #else
 173 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 174 #define CONFIG_ENV_SIZE         0x2000
 175 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 176 #endif
 177
 178 #define CONFIG_SYS_CLK_FREQ     100000000
 179 #define CONFIG_DDR_CLK_FREQ     66666666
 180
 181 /*
 182  * These can be toggled for performance analysis, otherwise use default.
 183  */
 184 #define CONFIG_SYS_CACHE_STASHING
 185 #define CONFIG_BACKSIDE_L2_CACHE
 186 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 187 #define CONFIG_BTB                      /* toggle branch predition */
 188 #define CONFIG_DDR_ECC
 189 #ifdef CONFIG_DDR_ECC
 190 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 191 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 192 #endif
 193
 194 #define CONFIG_ENABLE_36BIT_PHYS
 195
 196 #define CONFIG_ADDR_MAP
 197 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 198
 199 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 200 #define CONFIG_SYS_MEMTEST_END          0x00400000
 201
 202 /*
 203  *  Config the L3 Cache as L3 SRAM
 204  */
 205 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 206 /*
 207  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 208  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 209  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 210  */
 211 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 212 #define CONFIG_SYS_L3_SIZE              256 << 10
 213 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 214 #ifdef CONFIG_RAMBOOT_PBL
 215 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 216 #endif
 217 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 218 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 219 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 220
 221 #define CONFIG_SYS_DCSRBAR              0xf0000000
 222 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 223
 224 /*
 225  * DDR Setup
 226  */
 227 #define CONFIG_VERY_BIG_RAM
 228 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 229 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 230
 231 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 232 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 233
 234 #define CONFIG_DDR_SPD
 235
 236 #define CONFIG_SYS_SPD_BUS_NUM  0
 237 #define SPD_EEPROM_ADDRESS      0x51
 238
 239 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 240
 241 /*
 242  * IFC Definitions
 243  */
 244 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 245 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 246
 247 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 248 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 249                                 CSPR_PORT_SIZE_16 | \
 250                                 CSPR_MSEL_NOR | \
 251                                 CSPR_V)
 252 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 253
 254 /*
 255  * TDM Definition
 256  */
 257 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 258
 259 /* NOR Flash Timing Params */
 260 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 261 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 262                                 FTIM0_NOR_TEADC(0x5) | \
 263                                 FTIM0_NOR_TEAHC(0x5))
 264 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 265                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 266                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 267 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 268                                 FTIM2_NOR_TCH(0x4) | \
 269                                 FTIM2_NOR_TWPH(0x0E) | \
 270                                 FTIM2_NOR_TWP(0x1c))
 271 #define CONFIG_SYS_NOR_FTIM3    0x0
 272
 273 #define CONFIG_SYS_FLASH_QUIET_TEST
 274 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 275
 276 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 277 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 278 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 279 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 280
 281 #define CONFIG_SYS_FLASH_EMPTY_INFO
 282 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 283
 284 /* CPLD on IFC */
 285 #define CPLD_LBMAP_MASK                 0x3F
 286 #define CPLD_BANK_SEL_MASK              0x07
 287 #define CPLD_BANK_OVERRIDE              0x40
 288 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 289 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 290 #define CPLD_LBMAP_RESET                0xFF
 291 #define CPLD_LBMAP_SHIFT                0x03
 292
 293 #if defined(CONFIG_TARGET_T1042RDB_PI)
 294 #define CPLD_DIU_SEL_DFP                0x80
 295 #elif defined(CONFIG_TARGET_T1042D4RDB)
 296 #define CPLD_DIU_SEL_DFP                0xc0
 297 #endif
 298
 299 #if defined(CONFIG_TARGET_T1040D4RDB)
 300 #define CPLD_INT_MASK_ALL               0xFF
 301 #define CPLD_INT_MASK_THERM             0x80
 302 #define CPLD_INT_MASK_DVI_DFP           0x40
 303 #define CPLD_INT_MASK_QSGMII1           0x20
 304 #define CPLD_INT_MASK_QSGMII2           0x10
 305 #define CPLD_INT_MASK_SGMI1             0x08
 306 #define CPLD_INT_MASK_SGMI2             0x04
 307 #define CPLD_INT_MASK_TDMR1             0x02
 308 #define CPLD_INT_MASK_TDMR2             0x01
 309 #endif
 310
 311 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 312 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 313 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 314 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 315                                 | CSPR_PORT_SIZE_8 \
 316                                 | CSPR_MSEL_GPCM \
 317                                 | CSPR_V)
 318 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 319 #define CONFIG_SYS_CSOR2        0x0
 320 /* CPLD Timing parameters for IFC CS2 */
 321 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 322                                         FTIM0_GPCM_TEADC(0x0e) | \
 323                                         FTIM0_GPCM_TEAHC(0x0e))
 324 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 325                                         FTIM1_GPCM_TRAD(0x1f))
 326 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 327                                         FTIM2_GPCM_TCH(0x8) | \
 328                                         FTIM2_GPCM_TWP(0x1f))
 329 #define CONFIG_SYS_CS2_FTIM3            0x0
 330
 331 /* NAND Flash on IFC */
 332 #define CONFIG_NAND_FSL_IFC
 333 #define CONFIG_SYS_NAND_BASE            0xff800000
 334 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 335
 336 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 337 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 338                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 339                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 340                                 | CSPR_V)
 341 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 342
 343 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 344                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 345                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 346                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 347                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 348                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 349                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 350
 351 #define CONFIG_SYS_NAND_ONFI_DETECTION
 352
 353 /* ONFI NAND Flash mode0 Timing Params */
 354 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 355                                         FTIM0_NAND_TWP(0x18)   | \
 356                                         FTIM0_NAND_TWCHT(0x07) | \
 357                                         FTIM0_NAND_TWH(0x0a))
 358 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 359                                         FTIM1_NAND_TWBE(0x39)  | \
 360                                         FTIM1_NAND_TRR(0x0e)   | \
 361                                         FTIM1_NAND_TRP(0x18))
 362 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 363                                         FTIM2_NAND_TREH(0x0a) | \
 364                                         FTIM2_NAND_TWHRE(0x1e))
 365 #define CONFIG_SYS_NAND_FTIM3           0x0
 366
 367 #define CONFIG_SYS_NAND_DDR_LAW         11
 368 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 369 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 370
 371 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 372
 373 #if defined(CONFIG_NAND)
 374 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 375 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 376 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 377 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 378 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 379 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 380 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 381 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 382 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 383 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 384 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 385 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 386 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 387 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 388 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 389 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 390 #else
 391 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 392 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 393 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 394 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 395 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 396 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 397 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 398 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 399 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 400 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 401 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 402 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 403 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 404 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 405 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 406 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 407 #endif
 408
 409 #ifdef CONFIG_SPL_BUILD
 410 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 411 #else
 412 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 413 #endif
 414
 415 #if defined(CONFIG_RAMBOOT_PBL)
 416 #define CONFIG_SYS_RAMBOOT
 417 #endif
 418
 419 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 420 #if defined(CONFIG_NAND)
 421 #define CONFIG_A008044_WORKAROUND
 422 #endif
 423 #endif
 424
 425 #define CONFIG_HWCONFIG
 426
 427 /* define to use L1 as initial stack */
 428 #define CONFIG_L1_INIT_RAM
 429 #define CONFIG_SYS_INIT_RAM_LOCK
 430 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 432 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 433 /* The assembler doesn't like typecast */
 434 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 435         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 436           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 437 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 438
 439 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 440                                         GENERATED_GBL_DATA_SIZE)
 441 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 442
 443 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 444 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 445
 446 /* Serial Port - controlled on board with jumper J8
 447  * open - index 2
 448  * shorted - index 1
 449  */
 450 #define CONFIG_SYS_NS16550_SERIAL
 451 #define CONFIG_SYS_NS16550_REG_SIZE     1
 452 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 453
 454 #define CONFIG_SYS_BAUDRATE_TABLE       \
 455         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 456
 457 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 458 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 459 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 460 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 461
 462 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 463 /* Video */
 464 #define CONFIG_FSL_DIU_FB
 465
 466 #ifdef CONFIG_FSL_DIU_FB
 467 #define CONFIG_FSL_DIU_CH7301
 468 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 469 #define CONFIG_VIDEO_LOGO
 470 #define CONFIG_VIDEO_BMP_LOGO
 471 #endif
 472 #endif
 473
 474 /* I2C */
 475 #define CONFIG_SYS_I2C
 476 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 477 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 478 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 479 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 480 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 481 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 482 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 483 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 484 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 485 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 486 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 487 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 488 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 489
 490 /* I2C bus multiplexer */
 491 #define I2C_MUX_PCA_ADDR                0x70
 492 #define I2C_MUX_CH_DEFAULT      0x8
 493
 494 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 495         defined(CONFIG_TARGET_T1040D4RDB)       || \
 496         defined(CONFIG_TARGET_T1042D4RDB)
 497 /* LDI/DVI Encoder for display */
 498 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 499 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 500
 501 /*
 502  * RTC configuration
 503  */
 504 #define RTC
 505 #define CONFIG_RTC_DS1337               1
 506 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 507
 508 /*DVI encoder*/
 509 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 510 #endif
 511
 512 /*
 513  * eSPI - Enhanced SPI
 514  */
 515
 516 /*
 517  * General PCI
 518  * Memory space is mapped 1-1, but I/O space must start from 0.
 519  */
 520
 521 #ifdef CONFIG_PCI
 522 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 523 #ifdef CONFIG_PCIE1
 524 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 525 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 526 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 527 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 528 #endif
 529
 530 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 531 #ifdef CONFIG_PCIE2
 532 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 533 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 534 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 535 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 536 #endif
 537
 538 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 539 #ifdef CONFIG_PCIE3
 540 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 541 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 542 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 543 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 544 #endif
 545
 546 /* controller 4, Base address 203000 */
 547 #ifdef CONFIG_PCIE4
 548 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 549 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 550 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 551 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 552 #endif
 553
 554 #if !defined(CONFIG_DM_PCI)
 555 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 556 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 557 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 558 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 559 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 560 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 561 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 562 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 563 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 564 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 566 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 567 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 568 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 569 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 570 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 571 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 572 #define CONFIG_PCI_INDIRECT_BRIDGE
 573 #endif
 574 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 575 #endif  /* CONFIG_PCI */
 576
 577 /* SATA */
 578 #define CONFIG_FSL_SATA_V2
 579 #ifdef CONFIG_FSL_SATA_V2
 580 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 581 #define CONFIG_SATA1
 582 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 583 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 584
 585 #define CONFIG_LBA48
 586 #endif
 587
 588 /*
 589 * USB
 590 */
 591 #define CONFIG_HAS_FSL_DR_USB
 592
 593 #ifdef CONFIG_HAS_FSL_DR_USB
 594 #ifdef CONFIG_USB_EHCI_HCD
 595 #define CONFIG_USB_EHCI_FSL
 596 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 597 #endif
 598 #endif
 599
 600 #ifdef CONFIG_MMC
 601 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 602 #endif
 603
 604 /* Qman/Bman */
 605 #ifndef CONFIG_NOBQFMAN
 606 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 607 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 608 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 609 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 610 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 611 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 612 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 613 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 614 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 615                                         CONFIG_SYS_BMAN_CENA_SIZE)
 616 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 617 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 618 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 619 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 620 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 621 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 622 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 623 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 624 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 625 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 626 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 627                                         CONFIG_SYS_QMAN_CENA_SIZE)
 628 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 629 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 630
 631 #define CONFIG_SYS_DPAA_FMAN
 632 #define CONFIG_SYS_DPAA_PME
 633
 634 #define CONFIG_U_QE
 635
 636 /* Default address of microcode for the Linux Fman driver */
 637 #if defined(CONFIG_SPIFLASH)
 638 /*
 639  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 640  * env, so we got 0x110000.
 641  */
 642 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 643 #elif defined(CONFIG_SDCARD)
 644 /*
 645  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 646  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 647  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 648  */
 649 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 650 #elif defined(CONFIG_NAND)
 651 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 652 #else
 653 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 654 #endif
 655
 656 #if defined(CONFIG_SPIFLASH)
 657 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 658 #elif defined(CONFIG_SDCARD)
 659 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 660 #elif defined(CONFIG_NAND)
 661 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 662 #else
 663 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 664 #endif
 665
 666 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 667 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 668 #endif /* CONFIG_NOBQFMAN */
 669
 670 #ifdef CONFIG_SYS_DPAA_FMAN
 671 #define CONFIG_PHY_VITESSE
 672 #define CONFIG_PHY_REALTEK
 673 #endif
 674
 675 #ifdef CONFIG_FMAN_ENET
 676 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 677 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 678 #elif defined(CONFIG_TARGET_T1040D4RDB)
 679 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 680 #elif defined(CONFIG_TARGET_T1042D4RDB)
 681 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 682 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 683 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 684 #endif
 685
 686 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 687 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 688 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 689 #else
 690 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 691 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 692 #endif
 693
 694 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 695 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 696 #define CONFIG_VSC9953
 697 #ifdef CONFIG_TARGET_T1040RDB
 698 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 699 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 700 #else
 701 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 702 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 703 #endif
 704 #endif
 705
 706 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 707 #endif
 708
 709 /*
 710  * Environment
 711  */
 712 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 713 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 714
 715 /*
 716  * Miscellaneous configurable options
 717  */
 718 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 719
 720 /*
 721  * For booting Linux, the board info and command line data
 722  * have to be in the first 64 MB of memory, since this is
 723  * the maximum mapped by the Linux kernel during initialization.
 724  */
 725 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 726 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 727
 728 #ifdef CONFIG_CMD_KGDB
 729 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 730 #endif
 731
 732 /*
 733  * Dynamic MTD Partition support with mtdparts
 734  */
 735
 736 /*
 737  * Environment Configuration
 738  */
 739 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 740 #define CONFIG_BOOTFILE         "uImage"
 741 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 742
 743 /* default location for tftp and bootm */
 744 #define CONFIG_LOADADDR         1000000
 745
 746 #define __USB_PHY_TYPE  utmi
 747 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 748
 749 #ifdef CONFIG_TARGET_T1040RDB
 750 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 751 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 752 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 753 #elif defined(CONFIG_TARGET_T1042RDB)
 754 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 755 #elif defined(CONFIG_TARGET_T1040D4RDB)
 756 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 757 #elif defined(CONFIG_TARGET_T1042D4RDB)
 758 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 759 #endif
 760
 761 #ifdef CONFIG_FSL_DIU_FB
 762 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 763 #else
 764 #define DIU_ENVIRONMENT
 765 #endif
 766
 767 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 768         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 769         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 770         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 771         "netdev=eth0\0"                                         \
 772         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 773         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 774         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 775         "tftpflash=tftpboot $loadaddr $uboot && "               \
 776         "protect off $ubootaddr +$filesize && "                 \
 777         "erase $ubootaddr +$filesize && "                       \
 778         "cp.b $loadaddr $ubootaddr $filesize && "               \
 779         "protect on $ubootaddr +$filesize && "                  \
 780         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 781         "consoledev=ttyS0\0"                                    \
 782         "ramdiskaddr=2000000\0"                                 \
 783         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 784         "fdtaddr=1e00000\0"                                     \
 785         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 786         "bdev=sda3\0"
 787
 788 #define CONFIG_LINUX                       \
 789         "setenv bootargs root=/dev/ram rw "            \
 790         "console=$consoledev,$baudrate $othbootargs;"  \
 791         "setenv ramdiskaddr 0x02000000;"               \
 792         "setenv fdtaddr 0x00c00000;"                   \
 793         "setenv loadaddr 0x1000000;"                   \
 794         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 795
 796 #define CONFIG_HDBOOT                                   \
 797         "setenv bootargs root=/dev/$bdev rw "           \
 798         "console=$consoledev,$baudrate $othbootargs;"   \
 799         "tftp $loadaddr $bootfile;"                     \
 800         "tftp $fdtaddr $fdtfile;"                       \
 801         "bootm $loadaddr - $fdtaddr"
 802
 803 #define CONFIG_NFSBOOTCOMMAND                   \
 804         "setenv bootargs root=/dev/nfs rw "     \
 805         "nfsroot=$serverip:$rootpath "          \
 806         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 807         "console=$consoledev,$baudrate $othbootargs;"   \
 808         "tftp $loadaddr $bootfile;"             \
 809         "tftp $fdtaddr $fdtfile;"               \
 810         "bootm $loadaddr - $fdtaddr"
 811
 812 #define CONFIG_RAMBOOTCOMMAND                           \
 813         "setenv bootargs root=/dev/ram rw "             \
 814         "console=$consoledev,$baudrate $othbootargs;"   \
 815         "tftp $ramdiskaddr $ramdiskfile;"               \
 816         "tftp $loadaddr $bootfile;"                     \
 817         "tftp $fdtaddr $fdtfile;"                       \
 818         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 819
 820 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 821
 822 #include <asm/fsl_secure_boot.h>
 823
 824 #endif  /* __CONFIG_H */